mbed library sources. Supersedes mbed-src.
Fork of mbed-dev by
Diff: targets/TARGET_NUVOTON/TARGET_NUC472/device/StdDriver/nuc472_sc.c
- Revision:
- 153:9398a535854b
- Parent:
- 152:9a67f0b066fc
diff -r 9a67f0b066fc -r 9398a535854b targets/TARGET_NUVOTON/TARGET_NUC472/device/StdDriver/nuc472_sc.c --- a/targets/TARGET_NUVOTON/TARGET_NUC472/device/StdDriver/nuc472_sc.c Thu Dec 15 11:48:27 2016 +0000 +++ /dev/null Thu Jan 01 00:00:00 1970 +0000 @@ -1,281 +0,0 @@ -/**************************************************************************//** - * @file sc.c - * @version V1.00 - * $Revision: 6 $ - * $Date: 14/08/12 7:25p $ - * @brief NUC472/NUC442 Smartcard(SC) driver source file - * - * @note - * Copyright (C) 2014 Nuvoton Technology Corp. All rights reserved. -*****************************************************************************/ -#include "NUC472_442.h" - -// Below are variables used locally by SC driver and does not want to parse by doxygen unless HIDDEN_SYMBOLS is defined -/// @cond HIDDEN_SYMBOLS -static uint32_t u32CardStateIgnore[SC_INTERFACE_NUM] = {0, 0, 0, 0, 0, 0}; - -/// @endcond HIDDEN_SYMBOLS - -/** @addtogroup NUC472_442_Device_Driver NUC472/NUC442 Device Driver - @{ -*/ - -/** @addtogroup NUC472_442_SC_Driver SC Driver - @{ -*/ - - -/** @addtogroup NUC472_442_SC_EXPORTED_FUNCTIONS SC Exported Functions - @{ -*/ - -/** - * @brief This function indicates specified smartcard slot status - * @param[in] sc Base address of smartcard module - * @return Card insert status - * @retval TRUE Card insert - * @retval FALSE Card remove - */ -uint32_t SC_IsCardInserted(SC_T *sc) -{ - // put conditions into two variable to remove IAR compilation warning - uint32_t cond1 = ((sc->STATUS & SC_STATUS_CDPINSTS_Msk) >> SC_STATUS_CDPINSTS_Pos); - uint32_t cond2 = ((sc->CTL & SC_CTL_CDLV_Msk) >> SC_CTL_CDLV_Pos); - - if(sc == SC0 && u32CardStateIgnore[0] == 1) - return TRUE; - else if(sc == SC1 && u32CardStateIgnore[1] == 1) - return TRUE; - else if(sc == SC2 && u32CardStateIgnore[2] == 1) - return TRUE; - else if(sc == SC3 && u32CardStateIgnore[3] == 1) - return TRUE; - else if(sc == SC4 && u32CardStateIgnore[4] == 1) - return TRUE; - else if(sc == SC5 && u32CardStateIgnore[5] == 1) - return TRUE; - else if(cond1 != cond2) - return FALSE; - else - return TRUE; -} - -/** - * @brief This function reset both transmit and receive FIFO of specified smartcard module - * @param[in] sc Base address of smartcard module - * @return None - */ -void SC_ClearFIFO(SC_T *sc) -{ - sc->ALTCTL |= (SC_ALTCTL_TXRST_Msk | SC_ALTCTL_RXRST_Msk); -} - -/** - * @brief This function disable specified smartcard module - * @param[in] sc Base address of smartcard module - * @return None - */ -void SC_Close(SC_T *sc) -{ - sc->INTEN = 0; - while(sc->PINCTL & SC_PINCTL_SYNC_Msk); - sc->PINCTL = 0; - sc->ALTCTL = 0; - while(sc->CTL & SC_CTL_SYNC_Msk); - sc->CTL = 0; -} - -/** - * @brief This function initialized smartcard module - * @param[in] sc Base address of smartcard module - * @param[in] u32CD Card detect polarity, select the CD pin state which indicates card insert. Could be - * -\ref SC_PIN_STATE_HIGH - * -\ref SC_PIN_STATE_LOW - * -\ref SC_PIN_STATE_IGNORE, no card detect pin, always assumes card present - * @param[in] u32PWR Power on polarity, select the PWR pin state which could set smartcard VCC to high level. Could be - * -\ref SC_PIN_STATE_HIGH - * -\ref SC_PIN_STATE_LOW - * @return None - */ -void SC_Open(SC_T *sc, uint32_t u32CD, uint32_t u32PWR) -{ - uint32_t u32Reg = 0, u32Intf; - - if(sc == SC0) - u32Intf = 0; - else if(sc == SC1) - u32Intf = 1; - else if(sc == SC2) - u32Intf = 2; - else if(sc == SC3) - u32Intf = 3; - else if(sc == SC4) - u32Intf = 4; - else - u32Intf = 5; - - if(u32CD != SC_PIN_STATE_IGNORE) { - u32Reg = u32CD ? 0: SC_CTL_CDLV_Msk; - u32CardStateIgnore[u32Intf] = 0; - } else { - u32CardStateIgnore[u32Intf] = 1; - } - sc->PINCTL = u32PWR ? 0 : SC_PINCTL_PWRINV_Msk; - while(sc->CTL & SC_CTL_SYNC_Msk); - sc->CTL = SC_CTL_SCEN_Msk | u32Reg; -} - -/** - * @brief This function reset specified smartcard module to its default state for activate smartcard - * @param[in] sc Base address of smartcard module - * @return None - */ -void SC_ResetReader(SC_T *sc) -{ - uint32_t u32Intf; - - if(sc == SC0) - u32Intf = 0; - else if(sc == SC1) - u32Intf = 1; - else if(sc == SC2) - u32Intf = 2; - else if(sc == SC3) - u32Intf = 3; - else if(sc == SC4) - u32Intf = 4; - else - u32Intf = 5; - - // Reset FIFO, enable auto de-activation while card removal - sc->ALTCTL |= (SC_ALTCTL_TXRST_Msk | SC_ALTCTL_RXRST_Msk | SC_ALTCTL_ADACEN_Msk); - // Set Rx trigger level to 1 character, longest card detect debounce period, disable error retry (EMV ATR does not use error retry) - while(sc->CTL & SC_CTL_SYNC_Msk); - sc->CTL &= ~(SC_CTL_RXTRGLV_Msk | SC_CTL_CDDBSEL_Msk | SC_CTL_TXRTY_Msk | SC_CTL_RXRTY_Msk); - // Enable auto convention, and all three smartcard internal timers - sc->CTL |= SC_CTL_AUTOCEN_Msk | SC_CTL_TMRSEL_Msk; - // Disable Rx timeout - sc->RXTOUT = 0; - // 372 clocks per ETU by default - sc->ETUCTL= 371; - - - /* Enable necessary interrupt for smartcard operation */ - if(u32CardStateIgnore[u32Intf]) // Do not enable card detect interrupt if card present state ignore - sc->INTEN = (SC_INTEN_RDAIEN_Msk | - SC_INTEN_TERRIEN_Msk | - SC_INTEN_TMR0IEN_Msk | - SC_INTEN_TMR1IEN_Msk | - SC_INTEN_TMR2IEN_Msk | - SC_INTEN_BGTIEN_Msk | - SC_INTEN_ACERRIEN_Msk); - else - sc->INTEN = (SC_INTEN_RDAIEN_Msk | - SC_INTEN_TERRIEN_Msk | - SC_INTEN_TMR0IEN_Msk | - SC_INTEN_TMR1IEN_Msk | - SC_INTEN_TMR2IEN_Msk | - SC_INTEN_BGTIEN_Msk | - SC_INTEN_CDIEN_Msk | - SC_INTEN_ACERRIEN_Msk); - - return; -} - -/** - * @brief This function block guard time (BGT) of specified smartcard module - * @param[in] sc Base address of smartcard module - * @param[in] u32BGT Block guard time using ETU as unit, valid range are between 1 ~ 32 - * @return None - */ -void SC_SetBlockGuardTime(SC_T *sc, uint32_t u32BGT) -{ - sc->CTL = (sc->CTL & ~SC_CTL_BGT_Msk) | ((u32BGT - 1) << SC_CTL_BGT_Pos); -} - -/** - * @brief This function character guard time (CGT) of specified smartcard module - * @param[in] sc Base address of smartcard module - * @param[in] u32CGT Character guard time using ETU as unit, valid range are between 11 ~ 267 - * @return None - */ -void SC_SetCharGuardTime(SC_T *sc, uint32_t u32CGT) -{ - u32CGT -= sc->CTL & SC_CTL_NSB_Msk ? 11: 12; - sc->EGT = u32CGT; -} - -/** - * @brief This function stop all smartcard timer of specified smartcard module - * @param[in] sc Base address of smartcard module - * @return None - * @note This function stop the timers within smartcard module, \b not timer module - */ -void SC_StopAllTimer(SC_T *sc) -{ - sc->ALTCTL &= ~(SC_ALTCTL_CNTEN0_Msk | SC_ALTCTL_CNTEN1_Msk | SC_ALTCTL_CNTEN2_Msk); -} - -/** - * @brief This function configure and start a smartcard timer of specified smartcard module - * @param[in] sc Base address of smartcard module - * @param[in] u32TimerNum Timer(s) to start. Valid values are 0, 1, 2. - * @param[in] u32Mode Timer operating mode, valid values are: - * - \ref SC_TMR_MODE_0 - * - \ref SC_TMR_MODE_1 - * - \ref SC_TMR_MODE_2 - * - \ref SC_TMR_MODE_3 - * - \ref SC_TMR_MODE_4 - * - \ref SC_TMR_MODE_5 - * - \ref SC_TMR_MODE_6 - * - \ref SC_TMR_MODE_7 - * - \ref SC_TMR_MODE_8 - * - \ref SC_TMR_MODE_F - * @param[in] u32ETUCount Timer timeout duration, ETU based. For timer 0, valid range are between 1~0x1000000ETUs. - * For timer 1 and timer 2, valid range are between 1 ~ 0x100 ETUs - * @return None - * @note This function start the timer within smartcard module, \b not timer module - * @note Depend on the timer operating mode, timer may not start counting immediately - */ -void SC_StartTimer(SC_T *sc, uint32_t u32TimerNum, uint32_t u32Mode, uint32_t u32ETUCount) -{ - uint32_t reg = u32Mode | (SC_TMRCTL0_CNT_Msk & (u32ETUCount - 1)); - - if(u32TimerNum == 0) { - sc->TMRCTL0 = reg; - sc->ALTCTL |= SC_ALTCTL_CNTEN0_Msk; - } else if(u32TimerNum == 1) { - sc->TMRCTL1 = reg; - sc->ALTCTL |= SC_ALTCTL_CNTEN1_Msk; - } else { // timer 2 - sc->TMRCTL2 = reg; - sc->ALTCTL |= SC_ALTCTL_CNTEN2_Msk; - } -} - -/** - * @brief This function stop a smartcard timer of specified smartcard module - * @param[in] sc Base address of smartcard module - * @param[in] u32TimerNum Timer(s) to stop. Valid values are 0, 1, 2. - * @return None - * @note This function stop the timer within smartcard module, \b not timer module - */ -void SC_StopTimer(SC_T *sc, uint32_t u32TimerNum) -{ - if(u32TimerNum == 0) - sc->ALTCTL &= ~SC_ALTCTL_CNTEN0_Msk; - else if(u32TimerNum == 1) - sc->ALTCTL &= ~SC_ALTCTL_CNTEN1_Msk; - else // timer 2 - sc->ALTCTL &= ~SC_ALTCTL_CNTEN2_Msk; -} - - - -/*@}*/ /* end of group NUC472_442_SC_EXPORTED_FUNCTIONS */ - -/*@}*/ /* end of group NUC472_442_SC_Driver */ - -/*@}*/ /* end of group NUC472_442_Device_Driver */ - -/*** (C) COPYRIGHT 2014 Nuvoton Technology Corp. ***/