Diff: targets/TARGET_NUVOTON/TARGET_NUC472/TARGET_NUMAKER_PFM_NUC472/PinNames.h

Revision:

153:9398a535854b

Parent:

152:9a67f0b066fc

diff -r 9a67f0b066fc -r 9398a535854b targets/TARGET_NUVOTON/TARGET_NUC472/TARGET_NUMAKER_PFM_NUC472/PinNames.h
--- a/targets/TARGET_NUVOTON/TARGET_NUC472/TARGET_NUMAKER_PFM_NUC472/PinNames.h	Thu Dec 15 11:48:27 2016 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,116 +0,0 @@
-/* mbed Microcontroller Library
- * Copyright (c) 2015-2016 Nuvoton
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *     http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-#ifndef MBED_PINNAMES_H
-#define MBED_PINNAMES_H
-
-#include "cmsis.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define NU_PORT_SHIFT  12
-#define NU_PINNAME_TO_PORT(name)            ((unsigned int)(name) >> NU_PORT_SHIFT)
-#define NU_PINNAME_TO_PIN(name)             ((unsigned int)(name) & ~(0xFFFFFFFF << NU_PORT_SHIFT))
-#define NU_PORT_N_PIN_TO_PINNAME(port, pin) ((((unsigned int) (port)) << (NU_PORT_SHIFT)) | ((unsigned int) (pin)))
-#define NU_PORT_BASE(port)                  ((GPIO_T *)(((uint32_t) GPIOA_BASE) + 0x40 * port))
-#define NU_MFP_POS(pin)                     ((pin % 8) * 4)
-#define NU_MFP_MSK(pin)                     (0xful << NU_MFP_POS(pin))
-
-typedef enum {
-    PIN_INPUT,
-    PIN_OUTPUT
-} PinDirection;
-
-typedef enum {
-    PullNone = 0,
-    PullDown,
-    PullUp,
-    
-    PushPull,
-    OpenDrain,
-    Quasi,
-    
-    PullDefault = PullUp,
-} PinMode;
-
-typedef enum {
-    // Not connected
-    NC = (int)0xFFFFFFFF,
-    
-    // Generic naming
-    PA_0    = NU_PORT_N_PIN_TO_PINNAME(0, 0), PA_1, PA_2, PA_3, PA_4, PA_5, PA_6, PA_7, PA_8, PA_9, PA_10, PA_11, PA_12, PA_13, PA_14, PA_15,
-    PB_0    = NU_PORT_N_PIN_TO_PINNAME(1, 0), PB_1, PB_2, PB_3, PB_4, PB_5, PB_6, PB_7, PB_8, PB_9, PB_10, PB_11, PB_12, PB_13, PB_14, PB_15,
-    PC_0    = NU_PORT_N_PIN_TO_PINNAME(2, 0), PC_1, PC_2, PC_3, PC_4, PC_5, PC_6, PC_7, PC_8, PC_9, PC_10, PC_11, PC_12, PC_13, PC_14, PC_15,
-    PD_0    = NU_PORT_N_PIN_TO_PINNAME(3, 0), PD_1, PD_2, PD_3, PD_4, PD_5, PD_6, PD_7, PD_8, PD_9, PD_10, PD_11, PD_12, PD_13, PD_14, PD_15,
-    PE_0    = NU_PORT_N_PIN_TO_PINNAME(4, 0), PE_1, PE_2, PE_3, PE_4, PE_5, PE_6, PE_7, PE_8, PE_9, PE_10, PE_11, PE_12, PE_13, PE_14, PE_15,
-    PF_0    = NU_PORT_N_PIN_TO_PINNAME(5, 0), PF_1, PF_2, PF_3, PF_4, PF_5, PF_6, PF_7, PF_8, PF_9, PF_10, PF_11, PF_12, PF_13, PF_14, PF_15,
-    PG_0    = NU_PORT_N_PIN_TO_PINNAME(6, 0), PG_1, PG_2, PG_3, PG_4, PG_5, PG_6, PG_7, PG_8, PG_9, PG_10, PG_11, PG_12, PG_13, PG_14, PG_15,
-    PH_0    = NU_PORT_N_PIN_TO_PINNAME(7, 0), PH_1, PH_2, PH_3, PH_4, PH_5, PH_6, PH_7, PH_8, PH_9, PH_10, PH_11, PH_12, PH_13, PH_14, PH_15,
-    PI_0    = NU_PORT_N_PIN_TO_PINNAME(8, 0), PI_1, PI_2, PI_3, PI_4, PI_5, PI_6, PI_7, PI_8, PI_9, PI_10, PI_11, PI_12, PI_13, PI_14, PI_15,
-    
-    // Arduino UNO naming
-    A0 = PE_1,
-    A1 = PE_2,
-    A2 = PE_3,
-    A3 = PE_4,
-    A4 = PE_5,
-    A5 = PE_12,
-    A6 = PE_13,
-    A7 = PE_14,
-
-    D0 = PG_1,
-    D1 = PG_2,
-    D2 = PF_9,
-    D3 = PF_10,
-    D4 = PC_10,
-    D5 = PC_11,
-    D6 = PA_10,
-    D7 = PA_9,
-    D8 = PD_7,
-    D9 = PD_6,
-    D10 = PD_3,
-    D11 = PD_2,
-    D12 = PD_1,
-    D13 = PD_0,
-    D14 = PD_12,
-    D15 = PD_10,
-    
-    // FIXME: other board-specific naming
-    // UART naming
-    USBTX = PD_5,
-    USBRX = PD_4,
-    STDIO_UART_TX   = USBTX,
-    STDIO_UART_RX   = USBRX,
-    // LED naming
-    LED1 = PD_9,
-    LED2 = PA_4,
-    LED3 = PD_8,
-    LED4 = D0,  // No real LED. Just for passing ATS.
-    LED_RED = LED1,
-    LED_GREEN = LED2,
-    LED_BLUE = LED3,
-    // Button naming
-    SW1 = PC_12,
-    SW2 = PC_13,
-    
-} PinName;
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif // MBED_PINNAMES_H