mbed library sources. Supersedes mbed-src.
Fork of mbed-dev by
Diff: targets/TARGET_NUVOTON/TARGET_M451/device/StdDriver/m451_scuart.c
- Revision:
- 149:156823d33999
diff -r 21d94c44109e -r 156823d33999 targets/TARGET_NUVOTON/TARGET_M451/device/StdDriver/m451_scuart.c --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/targets/TARGET_NUVOTON/TARGET_M451/device/StdDriver/m451_scuart.c Fri Oct 28 11:17:30 2016 +0100 @@ -0,0 +1,223 @@ +/**************************************************************************//** + * @file scuart.c + * @version V3.00 + * $Revision: 8 $ + * $Date: 15/08/11 10:26a $ + * @brief M451 series Smartcard UART mode (SCUART) driver source file + * + * @note + * Copyright (C) 2013~2015 Nuvoton Technology Corp. All rights reserved. +*****************************************************************************/ +#include "M451Series.h" + +/** @addtogroup Standard_Driver Standard Driver + @{ +*/ + +/** @addtogroup SCUART_Driver SCUART Driver + @{ +*/ + + +/** @addtogroup SCUART_EXPORTED_FUNCTIONS SCUART Exported Functions + @{ +*/ + +/** + * @brief Disable smartcard uart interface. + * @param sc The pointer of smartcard module. + * @return None + * @details The function is used to disable smartcard interface UART mode. + */ +void SCUART_Close(SC_T* sc) +{ + sc->INTEN = 0; + sc->UARTCTL = 0; + sc->CTL = 0; + +} + +/// @cond HIDDEN_SYMBOLS +/** + * @brief This function returns module clock of specified SC interface + * @param[in] sc The pointer of smartcard module. + * @return Module clock of specified SC interface + */ +static uint32_t SCUART_GetClock(SC_T *sc) +{ + uint32_t u32ClkSrc, u32Num, u32Clk; + + if(sc == SC0) + u32Num = 0; +#if 0 /* M451 series has only one SC interface */ + else if(sc == SC1) + u32Num = 1; + else if(sc == SC2) + u32Num = 2; + else if(sc == SC3) + u32Num = 3; + else if(sc == SC4) + u32Num = 4; + else if(sc == SC5) + u32Intf = 5; +#endif + else + return FALSE; + + u32ClkSrc = (CLK->CLKSEL3 >> (2 * u32Num)) & CLK_CLKSEL3_SC0SEL_Msk; + + // Get smartcard module clock + if(u32ClkSrc == 0) + u32Clk = __HXT; + else if(u32ClkSrc == 1) + u32Clk = CLK_GetPLLClockFreq(); + else if(u32ClkSrc == 2) { + SystemCoreClockUpdate(); + if(CLK->CLKSEL0 & CLK_CLKSEL0_PCLK0SEL_Msk) + u32Clk = SystemCoreClock / 2; + else + u32Clk = SystemCoreClock; + } else + u32Clk = __HIRC; + +#if 0 /* M451 series has only one SC interface */ + if(u32Num < 4) { + u32Clk /= (((CLK->CLKDIV1 >> (8 * u32Num)) & CLK_CLKDIV1_SC0DIV_Msk) + 1); + } else { + u32Clk /= (((CLK->CLKDIV2 >> (8 * (u32Num - 4))) & CLK_CLKDIV2_SC4DIV_Msk) + 1); + } +#else + u32Clk /= (((CLK->CLKDIV1 >> (8 * u32Num)) & CLK_CLKDIV1_SC0DIV_Msk) + 1); +#endif + + return u32Clk; +} +/// @endcond HIDDEN_SYMBOLS + +/** + * @brief Enable smartcard uart interface. + * @param[in] sc The pointer of smartcard module. + * @param[in] u32baudrate Target baudrate of smartcard module. + * @return Actual baudrate of smartcard mode. + * @details This function use to enable smartcard module UART mode and set baudrate. + * @note This function configures character width to 8 bits, 1 stop bit, and no parity. + * And can use \ref SCUART_SetLineConfig function to update these settings. + */ +uint32_t SCUART_Open(SC_T* sc, uint32_t u32baudrate) +{ + uint32_t u32Clk = SCUART_GetClock(sc), u32Div; + + // Calculate divider for target baudrate + u32Div = (u32Clk + (u32baudrate >> 1) - 1) / u32baudrate - 1; + + sc->CTL = SC_CTL_SCEN_Msk | SC_CTL_NSB_Msk; // Enable smartcard interface and stop bit = 1 + sc->UARTCTL = SCUART_CHAR_LEN_8 | SCUART_PARITY_NONE | SC_UARTCTL_UARTEN_Msk; // Enable UART mode, disable parity and 8 bit per character + sc->ETUCTL = u32Div; + + return(u32Clk / (u32Div+1)); +} + +/** + * @brief Read data from smartcard UART interface. + * @param[in] sc The pointer of smartcard module. + * @param[in] pu8RxBuf The buffer to store receive the data. + * @param[in] u32ReadBytes Target number of characters to receive. + * @return Actual character number reads to buffer. + * @details The function is used to read Rx data from RX FIFO. + * @note This function does not block and return immediately if there's no data available. + */ +uint32_t SCUART_Read(SC_T* sc, uint8_t *pu8RxBuf, uint32_t u32ReadBytes) +{ + uint32_t u32Count; + + for(u32Count = 0; u32Count < u32ReadBytes; u32Count++) { + if(SCUART_GET_RX_EMPTY(sc)) { // no data available + break; + } + pu8RxBuf[u32Count] = SCUART_READ(sc); // get data from FIFO + } + + return u32Count; +} + +/** + * @brief This function use to config smartcard UART mode line setting. + * @param[in] sc The pointer of smartcard module. + * @param[in] u32Baudrate Target baudrate of smartcard module. If this value is 0, UART baudrate will not change. + * @param[in] u32DataWidth The data length, could be: + * - \ref SCUART_CHAR_LEN_5 + * - \ref SCUART_CHAR_LEN_6 + * - \ref SCUART_CHAR_LEN_7 + * - \ref SCUART_CHAR_LEN_8 + * @param[in] u32Parity The parity setting, could be: + * - \ref SCUART_PARITY_NONE + * - \ref SCUART_PARITY_ODD + * - \ref SCUART_PARITY_EVEN + * @param[in] u32StopBits The stop bit length, could be: + * - \ref SCUART_STOP_BIT_1 + * - \ref SCUART_STOP_BIT_2 + * @return Actual baudrate of smartcard. + * @details Smartcard UART mode is operated in LIN data frame. + */ +uint32_t SCUART_SetLineConfig(SC_T* sc, uint32_t u32Baudrate, uint32_t u32DataWidth, uint32_t u32Parity, uint32_t u32StopBits) +{ + + uint32_t u32Clk = SCUART_GetClock(sc), u32Div; + + if(u32Baudrate == 0) { // keep original baudrate setting + u32Div = sc->ETUCTL & SC_ETUCTL_ETURDIV_Msk; + } else { + // Calculate divider for target baudrate + u32Div = (u32Clk + (u32Baudrate >> 1) - 1) / u32Baudrate - 1; + sc->ETUCTL = u32Div; + } + + sc->CTL = u32StopBits | SC_CTL_SCEN_Msk; // Set stop bit + sc->UARTCTL = u32Parity | u32DataWidth | SC_UARTCTL_UARTEN_Msk; // Set character width and parity + + return(u32Clk / (u32Div+1)); +} + +/** + * @brief This function use to set receive timeout count. + * @param[in] sc The pointer of smartcard module. + * @param[in] u32TOC Rx timeout counter, using baudrate as counter unit. Valid range are 0~0x1FF, + * set this value to 0 will disable timeout counter. + * @return None + * @details The time-out counter resets and starts counting whenever the RX buffer received a + * new data word. Once the counter decrease to 1 and no new data is received or CPU + * does not read any data from FIFO, a receiver time-out interrupt will be generated. + */ +void SCUART_SetTimeoutCnt(SC_T* sc, uint32_t u32TOC) +{ + sc->RXTOUT = u32TOC; +} + + +/** + * @brief Write data to smartcard UART interface. + * @param[in] sc The pointer of smartcard module. + * @param[in] pu8TxBuf The buffer containing data to send to transmit FIFO. + * @param[in] u32WriteBytes Number of data to send. + * @return None + * @details This function is to write data into transmit FIFO to send data out. + * @note This function blocks until all data write into FIFO. + */ +void SCUART_Write(SC_T* sc, uint8_t *pu8TxBuf, uint32_t u32WriteBytes) +{ + uint32_t u32Count; + + for(u32Count = 0; u32Count != u32WriteBytes; u32Count++) { + while(SCUART_GET_TX_FULL(sc)); // Wait 'til FIFO not full + sc->DAT = pu8TxBuf[u32Count]; // Write 1 byte to FIFO + } +} + + +/*@}*/ /* end of group SCUART_EXPORTED_FUNCTIONS */ + +/*@}*/ /* end of group SCUART_Driver */ + +/*@}*/ /* end of group Standard_Driver */ + +/*** (C) COPYRIGHT 2013~2015 Nuvoton Technology Corp. ***/