File content as of revision 149:156823d33999:

/**************************************************************************//**
 * @file     usbd.h
 * @version  V1.00
 * $Revision: 21 $
 * $Date: 14/10/06 1:29p $
 * @brief    NUC472/NUC442 USBD driver header file
 *
 * @note
 * Copyright (C) 2014 Nuvoton Technology Corp. All rights reserved.
 *****************************************************************************/
#ifndef __USBD_H__
#define __USBD_H__

#ifdef __cplusplus
extern "C"
{
#endif


/** @addtogroup NUC472_442_Device_Driver NUC472/NUC442 Device Driver
  @{
*/

/** @addtogroup NUC472_442_USBD_Driver USBD Driver
  @{
*/

/** @addtogroup NUC472_442_USBD_EXPORTED_CONSTANTS USBD Exported Constants
  @{
*/
/// @cond HIDDEN_SYMBOLS
#define USBD_MAX_EP     12

#define Maximum(a,b)    (a)>(b) ? (a) : (b)
#define Minimum(a,b)    (a)<(b) ? (a) : (b)


#define CEP     0xff    /*!< Control Endpoint  \hideinitializer */
#define EPA     0       /*!< Endpoint A  \hideinitializer */
#define EPB     1       /*!< Endpoint B  \hideinitializer */
#define EPC     2       /*!< Endpoint C  \hideinitializer */
#define EPD     3       /*!< Endpoint D  \hideinitializer */
#define EPE     4       /*!< Endpoint E  \hideinitializer */
#define EPF     5       /*!< Endpoint F  \hideinitializer */
#define EPG     6       /*!< Endpoint G  \hideinitializer */
#define EPH     7       /*!< Endpoint H  \hideinitializer */
#define EPI     8       /*!< Endpoint I  \hideinitializer */
#define EPJ     9       /*!< Endpoint J  \hideinitializer */
#define EPK     10      /*!< Endpoint K  \hideinitializer */
#define EPL     11      /*!< Endpoint L  \hideinitializer */

/* USB Request Type */
#define REQ_STANDARD        0x00
#define REQ_CLASS           0x20
#define REQ_VENDOR          0x40

/* USB Standard Request */
#define GET_STATUS          0x00
#define CLEAR_FEATURE       0x01
#define SET_FEATURE         0x03
#define SET_ADDRESS         0x05
#define GET_DESCRIPTOR      0x06
#define SET_DESCRIPTOR      0x07
#define GET_CONFIGURATION   0x08
#define SET_CONFIGURATION   0x09
#define GET_INTERFACE       0x0A
#define SET_INTERFACE       0x0B
#define SYNC_FRAME          0x0C

/* USB Descriptor Type */
#define DESC_DEVICE         0x01
#define DESC_CONFIG         0x02
#define DESC_STRING         0x03
#define DESC_INTERFACE      0x04
#define DESC_ENDPOINT       0x05
#define DESC_QUALIFIER      0x06
#define DESC_OTHERSPEED     0x07
#define DESC_IFPOWER        0x08
#define DESC_OTG            0x09

/* USB HID Descriptor Type */
#define DESC_HID            0x21
#define DESC_HID_RPT        0x22

/* USB Descriptor Length */
#define LEN_DEVICE          18
#define LEN_QUALIFIER       10
#define LEN_CONFIG          9
#define LEN_INTERFACE       9
#define LEN_ENDPOINT        7
#define LEN_OTG             5
#define LEN_HID             9

/* USB Endpoint Type */
#define EP_ISO              0x01
#define EP_BULK             0x02
#define EP_INT              0x03

#define EP_INPUT            0x80
#define EP_OUTPUT           0x00

/* USB Feature Selector */
#define FEATURE_DEVICE_REMOTE_WAKEUP    0x01
#define FEATURE_ENDPOINT_HALT           0x00
/// @endcond HIDDEN_SYMBOLS
/********************* Bit definition of CEPCTL register **********************/
#define USB_CEPCTL_NAKCLR               ((uint32_t)0x00000000)      /*!<NAK clear  \hideinitializer */
#define USB_CEPCTL_STALL                ((uint32_t)0x00000002)      /*!<Stall  \hideinitializer */
#define USB_CEPCTL_ZEROLEN              ((uint32_t)0x00000004)      /*!<Zero length packet  \hideinitializer */
#define USB_CEPCTL_FLUSH                ((uint32_t)0x00000008)      /*!<CEP flush  \hideinitializer */

/********************* Bit definition of EPxRSPCTL register **********************/
#define USB_EP_RSPCTL_FLUSH             ((uint32_t)0x00000001)      /*!<Buffer Flush  \hideinitializer */
#define USB_EP_RSPCTL_MODE_AUTO         ((uint32_t)0x00000000)      /*!<Auto-Validate Mode  \hideinitializer */
#define USB_EP_RSPCTL_MODE_MANUAL       ((uint32_t)0x00000002)      /*!<Manual-Validate Mode  \hideinitializer */
#define USB_EP_RSPCTL_MODE_FLY          ((uint32_t)0x00000004)      /*!<Fly Mode  \hideinitializer */
#define USB_EP_RSPCTL_MODE_MASK         ((uint32_t)0x00000006)      /*!<Mode Mask  \hideinitializer */
#define USB_EP_RSPCTL_TOGGLE            ((uint32_t)0x00000008)      /*!<Clear Toggle bit  \hideinitializer */
#define USB_EP_RSPCTL_HALT              ((uint32_t)0x00000010)      /*!<Endpoint halt  \hideinitializer */
#define USB_EP_RSPCTL_ZEROLEN           ((uint32_t)0x00000020)      /*!<Zero length packet IN  \hideinitializer */
#define USB_EP_RSPCTL_SHORTTXEN         ((uint32_t)0x00000040)      /*!<Packet end  \hideinitializer */
#define USB_EP_RSPCTL_DISBUF            ((uint32_t)0x00000080)      /*!<Disable buffer  \hideinitializer */

/********************* Bit definition of EPxCFG register **********************/
#define USB_EP_CFG_VALID                ((uint32_t)0x00000001)      /*!<Endpoint Valid  \hideinitializer */
#define USB_EP_CFG_TYPE_BULK            ((uint32_t)0x00000002)      /*!<Endpoint type - bulk  \hideinitializer */
#define USB_EP_CFG_TYPE_INT             ((uint32_t)0x00000004)      /*!<Endpoint type - interrupt  \hideinitializer */
#define USB_EP_CFG_TYPE_ISO             ((uint32_t)0x00000006)      /*!<Endpoint type - isochronous  \hideinitializer */
#define USB_EP_CFG_TYPE_MASK            ((uint32_t)0x00000006)      /*!<Endpoint type mask  \hideinitializer */
#define USB_EP_CFG_DIR_OUT              ((uint32_t)0x00000000)      /*!<OUT endpoint  \hideinitializer */
#define USB_EP_CFG_DIR_IN               ((uint32_t)0x00000008)      /*!<IN endpoint  \hideinitializer */


/*@}*/ /* end of group NUC472_442_USBD_EXPORTED_CONSTANTS */

/** @addtogroup NUC472_442_USBD_EXPORTED_STRUCT USBD Exported Struct
  @{
*/


typedef struct USBD_CMD_STRUCT {
    uint8_t  bmRequestType;
    uint8_t  bRequest;
    uint16_t wValue;
    uint16_t wIndex;
    uint16_t wLength;

} S_USBD_CMD_T; /*!<USB Setup Packet Structure */




typedef struct s_usbd_info {
    uint8_t *gu8DevDesc;
    uint8_t *gu8ConfigDesc;
    uint8_t *gu8StrLangDesc;
    uint8_t *gu8StrVendorDesc;
    uint8_t *gu8StrProductDesc;
    uint8_t *gu8QualDesc;
    uint8_t *gu8OtherConfigDesc;
    uint8_t *gu8HidReportDesc[3];
    uint32_t gu32HidReportSize[3];

} S_USBD_INFO_T; /*!<USB Information Structure */


/*@}*/ /* end of group NUC472_442_USBD_EXPORTED_STRUCT */

/// @cond HIDDEN_SYMBOLS
extern uint32_t volatile g_usbd_DmaDone;
extern uint32_t g_usbd_UsbAddr;
extern uint32_t g_usbd_CtrlInSize;
extern uint32_t g_usbd_ShortPacket;
extern uint32_t g_usbd_CtrlZero;
extern uint8_t g_usbd_EpHalt[];
extern S_USBD_INFO_T gsInfo;
extern S_USBD_CMD_T gUsbCmd;
extern uint32_t g_usbd_Configured;
/// @endcond /* HIDDEN_SYMBOLS */

/** @addtogroup NUC472_442_USBD_EXPORTED_MACROS USBD Exported Macros
  @{
*/

#define USBD_ENABLE_USB()               ((uint32_t)(USBD->PHYCTL |= (USBD_PHYCTL_PHYEN_Msk|USBD_PHYCTL_DPPUEN_Msk))) /*!<Enable USB  \hideinitializer */
#define USBD_DISABLE_USB()              ((uint32_t)(USBD->PHYCTL &= ~USBD_PHYCTL_DPPUEN_Msk)) /*!<Disable USB  \hideinitializer */
#define USBD_ENABLE_PHY()               ((uint32_t)(USBD->PHYCTL |= USBD_PHYCTL_PHYEN_Msk)) /*!<Enable PHY  \hideinitializer */
#define USBD_DISABLE_PHY()              ((uint32_t)(USBD->PHYCTL &= ~USBD_PHYCTL_PHYEN_Msk)) /*!<Disable PHY  \hideinitializer */
#define USBD_SET_SE0()                  ((uint32_t)(USBD->PHYCTL &= ~USBD_PHYCTL_DPPUEN_Msk)) /*!<Enable SE0, Force USB PHY Transceiver to Drive SE0  \hideinitializer */
#define USBD_CLR_SE0()                  ((uint32_t)(USBD->PHYCTL |= USBD_PHYCTL_DPPUEN_Msk)) /*!<Disable SE0  \hideinitializer */
#define USBD_SET_ADDR(addr)             (USBD->FADDR = (addr)) /*!<Set USB address  \hideinitializer */
#define USBD_GET_ADDR()                 ((uint32_t)(USBD->FADDR)) /*!<Get USB address  \hideinitializer */
#define USBD_ENABLE_USB_INT(intr)       (USBD->GINTEN = (intr)) /*!<Enable USB Interrupt  \hideinitializer */
#define USBD_ENABLE_BUS_INT(intr)       (USBD->BUSINTEN = (intr)) /*!<Enable BUS Interrupt  \hideinitializer */
#define USBD_GET_BUS_INT_FLAG()         (USBD->BUSINTSTS)        /*!<Clear Bus interrupt flag  \hideinitializer */
#define USBD_CLR_BUS_INT_FLAG(flag)     (USBD->BUSINTSTS = flag) /*!<Clear Bus interrupt flag  \hideinitializer */
#define USBD_ENABLE_CEP_INT(intr)       (USBD->CEPINTEN = (intr)) /*!<Enable CEP Interrupt  \hideinitializer */
#define USBD_CLR_CEP_INT_FLAG(flag)     (USBD->CEPINTSTS = flag) /*!<Clear CEP interrupt flag  \hideinitializer */
#define USBD_SET_CEP_STATE(flag)        (USBD->CEPCTL = flag) /*!<Set CEP state  \hideinitializer */
#define USBD_START_CEP_IN(size)         (USBD->CEPTXCNT = size) /*!<Start CEP IN Transfer  \hideinitializer */
#define USBD_SET_MAX_PAYLOAD(ep, size)  (*((__IO uint32_t *) ((uint32_t)&USBD->EPAMPS + (uint32_t)((ep)*0x28))) = (size)) /*!<Set EPx Maximum Packet Size  \hideinitializer */
#define USBD_ENABLE_EP_INT(ep, intr)    (*((__IO uint32_t *) ((uint32_t)&USBD->EPAINTEN + (uint32_t)((ep)*0x28))) = (intr)) /*!<Enable EPx Interrupt  \hideinitializer */
#define USBD_GET_EP_INT_FLAG(ep)        (*((__IO uint32_t *) ((uint32_t)&USBD->EPAINTSTS + (uint32_t)((ep)*0x28)))) /*!<Get EPx interrupt flag  \hideinitializer */
#define USBD_CLR_EP_INT_FLAG(ep, flag)  (*((__IO uint32_t *) ((uint32_t)&USBD->EPAINTSTS + (uint32_t)((ep)*0x28))) = (flag)) /*!<Clear EPx interrupt flag  \hideinitializer */
#define USBD_SET_DMA_LEN(len)           (USBD->DMACNT = len) /*!<Set DMA transfer length  \hideinitializer */
#define USBD_SET_DMA_ADDR(addr)         (USBD->DMAADDR = addr) /*!<Set DMA transfer address  \hideinitializer */
#define USBD_SET_DMA_READ(epnum)        (USBD->DMACTL = (USBD->DMACTL & ~USBD_DMACTL_EPNUM_Msk) | USBD_DMACTL_DMARD_Msk | epnum) /*!<Set DMA transfer type to read \hideinitializer */
#define USBD_SET_DMA_WRITE(epnum)       (USBD->DMACTL = (USBD->DMACTL & ~(USBD_DMACTL_EPNUM_Msk | USBD_DMACTL_DMARD_Msk)) | epnum) /*!<Set DMA transfer type to write \hideinitializer */
#define USBD_ENABLE_DMA()               (USBD->DMACTL |= USBD_DMACTL_DMAEN_Msk) /*!<Enable DMA transfer  \hideinitializer */
#define USBD_IS_ATTACHED()              ((uint32_t)(USBD->PHYCTL & USBD_PHYCTL_VBUSDET_Msk)) /*!<Check cable connect state  \hideinitializer */


/*@}*/ /* end of group NUC472_442_USBD_EXPORTED_MACROS */

/** @addtogroup NUC472_442_USBD_EXPORTED_FUNCTIONS USBD Exported Functions
  @{
*/
/**
  * @brief  USBD_memcpy, Copy bytes hardware limitation
  * @param[in]  u8Dst   Destination pointer.
  * @param[in]  u8Src   Source pointer.
  * @param[in]  i32Size Copy size.
  * @retval None.
  */
static __INLINE void USBD_MemCopy(uint8_t *u8Dst, uint8_t *u8Src, int32_t i32Size)
{
    while (i32Size--) *u8Dst++ = *u8Src++;
}

/**
  * @brief  USBD_ResetDMA
  * @param  None
  * @retval None.
  */
static __INLINE void USBD_ResetDMA(void)
{
    USBD->DMACNT = 0;
    USBD->DMACTL = 0x80;
    USBD->DMACTL = 0x00;
}
/**
  * @brief  USBD_SetEpBufAddr, Set Endpoint buffer address
  * @param[in]  u32Ep      Endpoint Number
  * @param[in]  u32Base    Buffer Start Address
  * @param[in]  u32Len     Buffer length
  * @retval None.
  */
static __INLINE void USBD_SetEpBufAddr(uint32_t u32Ep, uint32_t u32Base, uint32_t u32Len)
{
    if (u32Ep == CEP) {
        USBD->CEPBUFSTART = u32Base;
        USBD->CEPBUFEND   = u32Base + u32Len - 1;
    } else {
        *((__IO uint32_t *) ((uint32_t)&USBD->EPABUFSTART + (uint32_t)(u32Ep*0x28))) = u32Base;
        *((__IO uint32_t *) ((uint32_t)&USBD->EPABUFEND + (uint32_t)(u32Ep*0x28))) = u32Base + u32Len - 1;
    }
}

/**
  * @brief  USBD_ConfigEp, Config Endpoint
  * @param[in]  u32Ep      USB endpoint
  * @param[in]  u32EpNum   Endpoint number
  * @param[in]  u32EpType  Endpoint type
  * @param[in]  u32EpDir   Endpoint direction
  * @retval None.
  */
static __INLINE void USBD_ConfigEp(uint32_t u32Ep, uint32_t u32EpNum, uint32_t u32EpType, uint32_t u32EpDir)
{
    if (u32EpType == USB_EP_CFG_TYPE_BULK)
        *((__IO uint32_t *)((uint32_t)&USBD->EPARSPCTL+(uint32_t)(u32Ep*0x28)))=(USB_EP_RSPCTL_FLUSH|USB_EP_RSPCTL_MODE_AUTO);
    else if (u32EpType == USB_EP_CFG_TYPE_INT)
        *((__IO uint32_t *)((uint32_t)&USBD->EPARSPCTL+(uint32_t)(u32Ep*0x28)))=(USB_EP_RSPCTL_FLUSH|USB_EP_RSPCTL_MODE_MANUAL);
    else if (u32EpType == USB_EP_CFG_TYPE_ISO)
        *((__IO uint32_t *)((uint32_t)&USBD->EPARSPCTL+(uint32_t)(u32Ep*0x28)))=(USB_EP_RSPCTL_FLUSH|USB_EP_RSPCTL_MODE_FLY);

    *((__IO uint32_t *)((uint32_t)&USBD->EPACFG+(uint32_t)(u32Ep*0x28)))=(u32EpType|u32EpDir|USB_EP_CFG_VALID|(u32EpNum << 4));
}

/**
 * @brief       Set USB endpoint stall state
 *
 * @param[in]   u32Ep         USB endpoint
 * @return      None
 *
 * @details     Set USB endpoint stall state, endpoint will return STALL token.
 */
static __INLINE void USBD_SetStall(uint32_t u32Ep)
{
    uint32_t u32CfgAddr;
    uint32_t u32Cfg;
    int i;

    if (u32Ep == 0)
        USBD_SET_CEP_STATE(USB_CEPCTL_STALL);
    else {
        for (i=0; i<USBD_MAX_EP; i++) {
            u32CfgAddr = (uint32_t)&USBD->EPACFG + (uint32_t)(i * 0x28);
            u32Cfg = *((__IO uint32_t *) (u32CfgAddr));

            if (((u32Cfg & 0xf0) >> 4) == u32Ep)
            {
                u32CfgAddr = (uint32_t)&USBD->EPARSPCTL + (uint32_t)(i * 0x28);
                u32Cfg = *((__IO uint32_t *) (u32CfgAddr)) & 0xf7;  /* avoid clear TOGGLE bit */
                *((__IO uint32_t *) (u32CfgAddr)) = (u32Cfg | USB_EP_RSPCTL_HALT);
            }
        }
    }
}

/**
 * @brief       Clear USB endpoint stall state
 *
 * @param[in]   u32Ep         USB endpoint
 * @return      None
 *
 * @details     Clear USB endpoint stall state, endpoint will return ACK/NAK token.
 */
static __INLINE void USBD_ClearStall(uint32_t u32Ep)
{
    uint32_t u32CfgAddr;
    uint32_t u32Cfg;
    int i;

    for (i=0; i<USBD_MAX_EP; i++) {
        u32CfgAddr = (uint32_t)&USBD->EPACFG + (uint32_t)(i * 0x28);
        u32Cfg = *((__IO uint32_t *) (u32CfgAddr));

        if (((u32Cfg & 0xf0) >> 4) == u32Ep)
        {
            u32CfgAddr = (uint32_t)&USBD->EPARSPCTL + (uint32_t)(i * 0x28);
            *((__IO uint32_t *) (u32CfgAddr)) = USB_EP_RSPCTL_TOGGLE;
        }
    }
}

/**
 * @brief       Get USB endpoint stall state
 *
 * @param[in]   u32Ep         USB endpoint
 * @retval      0: USB endpoint is not stalled.
 * @retval      non-0: USB endpoint is stalled.
 *
 * @details     Get USB endpoint stall state.
 */
static __INLINE uint32_t USBD_GetStall(uint32_t u32Ep)
{
    uint32_t u32CfgAddr;
    uint32_t u32Cfg;
    int i;

    for (i=0; i<USBD_MAX_EP; i++) {
        u32CfgAddr = (uint32_t)&USBD->EPACFG + (uint32_t)(i * 0x28);
        u32Cfg = *((__IO uint32_t *) (u32CfgAddr));

        if (((u32Cfg & 0xf0) >> 4) == u32Ep)
        {
            u32CfgAddr = (uint32_t)&USBD->EPARSPCTL + (uint32_t)(i * 0x28);
            return ((*((__IO uint32_t *) (u32CfgAddr))) & USB_EP_RSPCTL_HALT);
        }
    }
    return 0;
}


/*-------------------------------------------------------------------------------------------*/
typedef void (*VENDOR_REQ)(void); /*!<USB Vendor request callback function */
typedef void (*CLASS_REQ)(void); /*!<USB Class request callback function */
typedef void (*SET_INTERFACE_REQ)(uint32_t u32AltInterface); /*!<USB Standard request "Set Interface" callback function */

void USBD_Open(S_USBD_INFO_T *param, CLASS_REQ pfnClassReq, SET_INTERFACE_REQ pfnSetInterface);
void USBD_Start(void);
void USBD_ProcessSetupPacket(void);
void USBD_StandardRequest(void);
void USBD_UpdateDeviceState(void);
void USBD_PrepareCtrlIn(uint8_t *pu8Buf, uint32_t u32Size);
void USBD_CtrlIn(void);
void USBD_CtrlOut(uint8_t *pu8Buf, uint32_t u32Size);
void USBD_SwReset(void);
void USBD_SetVendorRequest(VENDOR_REQ pfnVendorReq);



/*@}*/ /* end of group NUC472_442_USBD_EXPORTED_FUNCTIONS */

/*@}*/ /* end of group NUC472_442_USBD_Driver */

/*@}*/ /* end of group NUC472_442_Device_Driver */

#ifdef __cplusplus
}
#endif

#endif //__USBD_H__

/*** (C) COPYRIGHT 2013 Nuvoton Technology Corp. ***/