Diff: targets/TARGET_NUVOTON/TARGET_M451/analogin_api.c

Revision:

149:156823d33999

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_NUVOTON/TARGET_M451/analogin_api.c	Fri Oct 28 11:17:30 2016 +0100
@@ -0,0 +1,160 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2015-2016 Nuvoton
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+ 
+#include "analogin_api.h"
+
+#if DEVICE_ANALOGIN
+
+#include "cmsis.h"
+#include "pinmap.h"
+#include "PeripheralPins.h"
+#include "nu_modutil.h"
+
+struct nu_adc_var {
+    uint32_t    en_msk;
+};
+
+static struct nu_adc_var adc0_var = {
+    .en_msk = 0
+};
+static struct nu_adc_var adc1_var = {
+    .en_msk = 0
+};
+static struct nu_adc_var adc2_var = {
+    .en_msk = 0
+};
+static struct nu_adc_var adc3_var = {
+    .en_msk = 0
+};
+static struct nu_adc_var adc4_var = {
+    .en_msk = 0
+};
+static struct nu_adc_var adc5_var = {
+    .en_msk = 0
+};
+static struct nu_adc_var adc6_var = {
+    .en_msk = 0
+};
+static struct nu_adc_var adc7_var = {
+    .en_msk = 0
+};
+static struct nu_adc_var adc8_var = {
+    .en_msk = 0
+};
+static struct nu_adc_var adc9_var = {
+    .en_msk = 0
+};
+static struct nu_adc_var adc10_var = {
+    .en_msk = 0
+};
+static struct nu_adc_var adc11_var = {
+    .en_msk = 0
+};
+static struct nu_adc_var adc12_var = {
+    .en_msk = 0
+};
+static struct nu_adc_var adc13_var = {
+    .en_msk = 0
+};
+static struct nu_adc_var adc14_var = {
+    .en_msk = 0
+};
+static struct nu_adc_var adc15_var = {
+    .en_msk = 0
+};
+
+static const struct nu_modinit_s adc_modinit_tab[] = {
+    {ADC_0_0, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, ADC00_IRQn, &adc0_var},
+    {ADC_0_1, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, ADC00_IRQn, &adc1_var},
+    {ADC_0_2, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, ADC00_IRQn, &adc2_var},
+    {ADC_0_3, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, ADC00_IRQn, &adc3_var},
+    {ADC_0_4, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, ADC00_IRQn, &adc4_var},
+    {ADC_0_5, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, ADC00_IRQn, &adc5_var},
+    {ADC_0_6, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, ADC00_IRQn, &adc6_var},
+    {ADC_0_7, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, ADC00_IRQn, &adc7_var},
+    {ADC_0_8, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, ADC00_IRQn, &adc8_var},
+    {ADC_0_9, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, ADC00_IRQn, &adc9_var},
+    {ADC_0_10, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, ADC00_IRQn, &adc10_var},
+    {ADC_0_11, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, ADC00_IRQn, &adc11_var},
+    {ADC_0_12, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, ADC00_IRQn, &adc12_var},
+    {ADC_0_13, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, ADC00_IRQn, &adc13_var},
+    {ADC_0_14, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, ADC00_IRQn, &adc14_var},
+    {ADC_0_15, EADC_MODULE, 0, CLK_CLKDIV0_EADC(8), EADC_RST, ADC00_IRQn, &adc15_var},
+};
+
+void analogin_init(analogin_t *obj, PinName pin)
+{   
+    obj->adc = (ADCName) pinmap_peripheral(pin, PinMap_ADC);
+    MBED_ASSERT(obj->adc != (ADCName) NC);
+
+    const struct nu_modinit_s *modinit = get_modinit(obj->adc, adc_modinit_tab);
+    MBED_ASSERT(modinit != NULL);
+    MBED_ASSERT(modinit->modname == obj->adc);
+    
+    EADC_T *eadc_base = (EADC_T *) NU_MODBASE(obj->adc);
+    
+    // NOTE: All channels (identified by ADCName) share a ADC module. This reset will also affect other channels of the same ADC module.
+    if (! ((struct nu_adc_var *) modinit->var)->en_msk) {
+        // Reset this module if no channel enabled
+        SYS_ResetModule(modinit->rsetidx);
+        
+        // Select clock source of paired channels
+        CLK_SetModuleClock(modinit->clkidx, modinit->clksrc, modinit->clkdiv);
+        // Enable clock of paired channels
+        CLK_EnableModuleClock(modinit->clkidx);
+        
+        // Power on ADC
+        //ADC_POWER_ON(ADC);
+        
+        // Set the ADC internal sampling time, input mode as single-end and enable the A/D converter
+        EADC_Open(eadc_base, EADC_CTL_DIFFEN_SINGLE_END);
+        EADC_SetInternalSampleTime(eadc_base, 6);
+    }
+    
+    uint32_t chn =  NU_MODSUBINDEX(obj->adc);
+    
+    // Wire pinout
+    pinmap_pinout(pin, PinMap_ADC);
+    
+    // Configure the sample module Nmod for analog input channel Nch and software trigger source
+    EADC_ConfigSampleModule(EADC, chn, EADC_SOFTWARE_TRIGGER, chn);
+    
+    ((struct nu_adc_var *) modinit->var)->en_msk |= 1 << chn;
+}
+
+uint16_t analogin_read_u16(analogin_t *obj)
+{
+    EADC_T *eadc_base = (EADC_T *) NU_MODBASE(obj->adc);
+    uint32_t chn =  NU_MODSUBINDEX(obj->adc);
+    
+    EADC_START_CONV(eadc_base, 1 << chn);
+    while (EADC_GET_PENDING_CONV(eadc_base) & (1 << chn));
+    uint16_t conv_res_12 = EADC_GET_CONV_DATA(eadc_base, chn);
+    // Just 12 bits are effective. Convert to 16 bits.
+    // conv_res_12: 0000 b11b10b9b8 b7b6b5b4 b3b2b1b0
+    // conv_res_16: b11b10b9b8 b7b6b5b4 b3b2b1b0 b11b10b9b8
+    uint16_t conv_res_16 = (conv_res_12 << 4) | (conv_res_12 >> 8);
+    
+    return conv_res_16;
+}
+
+float analogin_read(analogin_t *obj)
+{
+    uint16_t value = analogin_read_u16(obj);
+    return (float) value * (1.0f / (float) 0xFFFF);
+}
+
+#endif