mbed library sources. Supersedes mbed-src.
Fork of mbed-dev by
targets/TARGET_STM/TARGET_STM32F2/pin_device.h@162:16168a1438f3, 2017-04-08 (annotated)
- Committer:
- funshine
- Date:
- Sat Apr 08 17:03:55 2017 +0000
- Revision:
- 162:16168a1438f3
- Parent:
- 160:d5399cc887bb
add code to handle serial port rx error in uart_irq()
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
<> | 160:d5399cc887bb | 1 | /* mbed Microcontroller Library |
<> | 160:d5399cc887bb | 2 | ******************************************************************************* |
<> | 160:d5399cc887bb | 3 | * Copyright (c) 2016, STMicroelectronics |
<> | 160:d5399cc887bb | 4 | * All rights reserved. |
<> | 160:d5399cc887bb | 5 | * |
<> | 160:d5399cc887bb | 6 | * Redistribution and use in source and binary forms, with or without |
<> | 160:d5399cc887bb | 7 | * modification, are permitted provided that the following conditions are met: |
<> | 160:d5399cc887bb | 8 | * |
<> | 160:d5399cc887bb | 9 | * 1. Redistributions of source code must retain the above copyright notice, |
<> | 160:d5399cc887bb | 10 | * this list of conditions and the following disclaimer. |
<> | 160:d5399cc887bb | 11 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
<> | 160:d5399cc887bb | 12 | * this list of conditions and the following disclaimer in the documentation |
<> | 160:d5399cc887bb | 13 | * and/or other materials provided with the distribution. |
<> | 160:d5399cc887bb | 14 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
<> | 160:d5399cc887bb | 15 | * may be used to endorse or promote products derived from this software |
<> | 160:d5399cc887bb | 16 | * without specific prior written permission. |
<> | 160:d5399cc887bb | 17 | * |
<> | 160:d5399cc887bb | 18 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
<> | 160:d5399cc887bb | 19 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
<> | 160:d5399cc887bb | 20 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
<> | 160:d5399cc887bb | 21 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
<> | 160:d5399cc887bb | 22 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
<> | 160:d5399cc887bb | 23 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
<> | 160:d5399cc887bb | 24 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
<> | 160:d5399cc887bb | 25 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
<> | 160:d5399cc887bb | 26 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
<> | 160:d5399cc887bb | 27 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
<> | 160:d5399cc887bb | 28 | ******************************************************************************* |
<> | 160:d5399cc887bb | 29 | */ |
<> | 160:d5399cc887bb | 30 | #ifndef MBED_PIN_DEVICE_H |
<> | 160:d5399cc887bb | 31 | #define MBED_PIN_DEVICE_H |
<> | 160:d5399cc887bb | 32 | |
<> | 160:d5399cc887bb | 33 | #include "cmsis.h" |
<> | 160:d5399cc887bb | 34 | |
<> | 160:d5399cc887bb | 35 | // when LL is available, below include can be used |
<> | 160:d5399cc887bb | 36 | // #include "stm32f2xx_ll_gpio.h" |
<> | 160:d5399cc887bb | 37 | // until then let's define locally the required functions |
<> | 160:d5399cc887bb | 38 | #define LL_GPIO_PIN_0 GPIO_BSRR_BS0 /*!< Select pin 0 */ |
<> | 160:d5399cc887bb | 39 | #define LL_GPIO_PIN_1 GPIO_BSRR_BS1 /*!< Select pin 1 */ |
<> | 160:d5399cc887bb | 40 | #define LL_GPIO_PIN_2 GPIO_BSRR_BS2 /*!< Select pin 2 */ |
<> | 160:d5399cc887bb | 41 | #define LL_GPIO_PIN_3 GPIO_BSRR_BS3 /*!< Select pin 3 */ |
<> | 160:d5399cc887bb | 42 | #define LL_GPIO_PIN_4 GPIO_BSRR_BS4 /*!< Select pin 4 */ |
<> | 160:d5399cc887bb | 43 | #define LL_GPIO_PIN_5 GPIO_BSRR_BS5 /*!< Select pin 5 */ |
<> | 160:d5399cc887bb | 44 | #define LL_GPIO_PIN_6 GPIO_BSRR_BS6 /*!< Select pin 6 */ |
<> | 160:d5399cc887bb | 45 | #define LL_GPIO_PIN_7 GPIO_BSRR_BS7 /*!< Select pin 7 */ |
<> | 160:d5399cc887bb | 46 | #define LL_GPIO_PIN_8 GPIO_BSRR_BS8 /*!< Select pin 8 */ |
<> | 160:d5399cc887bb | 47 | #define LL_GPIO_PIN_9 GPIO_BSRR_BS9 /*!< Select pin 9 */ |
<> | 160:d5399cc887bb | 48 | #define LL_GPIO_PIN_10 GPIO_BSRR_BS10 /*!< Select pin 10 */ |
<> | 160:d5399cc887bb | 49 | #define LL_GPIO_PIN_11 GPIO_BSRR_BS11 /*!< Select pin 11 */ |
<> | 160:d5399cc887bb | 50 | #define LL_GPIO_PIN_12 GPIO_BSRR_BS12 /*!< Select pin 12 */ |
<> | 160:d5399cc887bb | 51 | #define LL_GPIO_PIN_13 GPIO_BSRR_BS13 /*!< Select pin 13 */ |
<> | 160:d5399cc887bb | 52 | #define LL_GPIO_PIN_14 GPIO_BSRR_BS14 /*!< Select pin 14 */ |
<> | 160:d5399cc887bb | 53 | #define LL_GPIO_PIN_15 GPIO_BSRR_BS15 /*!< Select pin 15 */ |
<> | 160:d5399cc887bb | 54 | |
<> | 160:d5399cc887bb | 55 | #define LL_GPIO_MODE_INPUT ((uint32_t)0x00000000U) /*!< Select input mode */ |
<> | 160:d5399cc887bb | 56 | #define LL_GPIO_MODE_OUTPUT GPIO_MODER_MODE0_0 /*!< Select output mode */ |
<> | 160:d5399cc887bb | 57 | #define LL_GPIO_MODE_ALTERNATE GPIO_MODER_MODE0_1 /*!< Select alternate function mode */ |
<> | 160:d5399cc887bb | 58 | #define LL_GPIO_MODE_ANALOG GPIO_MODER_MODE0 /*!< Select analog mode */ |
<> | 160:d5399cc887bb | 59 | |
<> | 160:d5399cc887bb | 60 | #define LL_GPIO_OUTPUT_PUSHPULL ((uint32_t)0x00000000U) /*!< Select push-pull as output type */ |
<> | 160:d5399cc887bb | 61 | #define LL_GPIO_OUTPUT_OPENDRAIN GPIO_OTYPER_OT0 /*!< Select open-drain as output type */ |
<> | 160:d5399cc887bb | 62 | |
<> | 160:d5399cc887bb | 63 | #define LL_GPIO_PULL_NO ((uint32_t)0x00000000U) /*!< Select I/O no pull */ |
<> | 160:d5399cc887bb | 64 | #define LL_GPIO_PULL_UP GPIO_PUPDR_PUPD0_0 /*!< Select I/O pull up */ |
<> | 160:d5399cc887bb | 65 | #define LL_GPIO_PULL_DOWN GPIO_PUPDR_PUPD0_1 /*!< Select I/O pull down */ |
<> | 160:d5399cc887bb | 66 | |
<> | 160:d5399cc887bb | 67 | #define LL_GPIO_SPEED_FREQ_LOW ((uint32_t)0x00000000U) /*!< Select I/O low output speed */ |
<> | 160:d5399cc887bb | 68 | #define LL_GPIO_SPEED_FREQ_MEDIUM GPIO_OSPEEDER_OSPEEDR0_0 /*!< Select I/O medium output speed */ |
<> | 160:d5399cc887bb | 69 | #define LL_GPIO_SPEED_FREQ_HIGH GPIO_OSPEEDER_OSPEEDR0_1 /*!< Select I/O fast output speed */ |
<> | 160:d5399cc887bb | 70 | #define LL_GPIO_SPEED_FREQ_VERY_HIGH GPIO_OSPEEDER_OSPEEDR0 /*!< Select I/O high output speed */ |
<> | 160:d5399cc887bb | 71 | |
<> | 160:d5399cc887bb | 72 | __STATIC_INLINE void LL_GPIO_SetAFPin_0_7(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) |
<> | 160:d5399cc887bb | 73 | { |
<> | 160:d5399cc887bb | 74 | MODIFY_REG(GPIOx->AFR[0], (GPIO_AFRL_AFSEL0 << (POSITION_VAL(Pin) * 4U)), |
<> | 160:d5399cc887bb | 75 | (Alternate << (POSITION_VAL(Pin) * 4U))); |
<> | 160:d5399cc887bb | 76 | } |
<> | 160:d5399cc887bb | 77 | |
<> | 160:d5399cc887bb | 78 | __STATIC_INLINE void LL_GPIO_SetAFPin_8_15(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Alternate) |
<> | 160:d5399cc887bb | 79 | { |
<> | 160:d5399cc887bb | 80 | MODIFY_REG(GPIOx->AFR[1], (GPIO_AFRH_AFSEL8 << (POSITION_VAL(Pin >> 8U) * 4U)), |
<> | 160:d5399cc887bb | 81 | (Alternate << (POSITION_VAL(Pin >> 8U) * 4U))); |
<> | 160:d5399cc887bb | 82 | } |
<> | 160:d5399cc887bb | 83 | __STATIC_INLINE void LL_GPIO_SetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Mode) |
<> | 160:d5399cc887bb | 84 | { |
<> | 160:d5399cc887bb | 85 | MODIFY_REG(GPIOx->MODER, (GPIO_MODER_MODE0 << (POSITION_VAL(Pin) * 2U)), (Mode << (POSITION_VAL(Pin) * 2U))); |
<> | 160:d5399cc887bb | 86 | } |
<> | 160:d5399cc887bb | 87 | __STATIC_INLINE uint32_t LL_GPIO_GetPinMode(GPIO_TypeDef *GPIOx, uint32_t Pin) |
<> | 160:d5399cc887bb | 88 | { |
<> | 160:d5399cc887bb | 89 | return (uint32_t)(READ_BIT(GPIOx->MODER, ((Pin * Pin) * GPIO_MODER_MODER0)) / (Pin * Pin)); |
<> | 160:d5399cc887bb | 90 | } |
<> | 160:d5399cc887bb | 91 | __STATIC_INLINE void LL_GPIO_SetPinPull(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Pull) |
<> | 160:d5399cc887bb | 92 | { |
<> | 160:d5399cc887bb | 93 | MODIFY_REG(GPIOx->PUPDR, (GPIO_PUPDR_PUPD0 << (POSITION_VAL(Pin) * 2U)), (Pull << (POSITION_VAL(Pin) * 2U))); |
<> | 160:d5399cc887bb | 94 | } |
<> | 160:d5399cc887bb | 95 | __STATIC_INLINE void LL_GPIO_SetPinOutputType(GPIO_TypeDef *GPIOx, uint32_t PinMask, uint32_t OutputType) |
<> | 160:d5399cc887bb | 96 | { |
<> | 160:d5399cc887bb | 97 | MODIFY_REG(GPIOx->OTYPER, PinMask, (PinMask * OutputType)); |
<> | 160:d5399cc887bb | 98 | } |
<> | 160:d5399cc887bb | 99 | __STATIC_INLINE void LL_GPIO_SetPinSpeed(GPIO_TypeDef *GPIOx, uint32_t Pin, uint32_t Speed) |
<> | 160:d5399cc887bb | 100 | { |
<> | 160:d5399cc887bb | 101 | MODIFY_REG(GPIOx->OSPEEDR, (GPIO_OSPEEDER_OSPEEDR0 << (POSITION_VAL(Pin) * 2U)), |
<> | 160:d5399cc887bb | 102 | (Speed << (POSITION_VAL(Pin) * 2U))); |
<> | 160:d5399cc887bb | 103 | } |
<> | 160:d5399cc887bb | 104 | // Above lines shall be defined in LL when available |
<> | 160:d5399cc887bb | 105 | |
<> | 160:d5399cc887bb | 106 | extern const uint32_t ll_pin_defines[16]; |
<> | 160:d5399cc887bb | 107 | |
<> | 160:d5399cc887bb | 108 | /* Family specific implementations */ |
<> | 160:d5399cc887bb | 109 | static inline void stm_pin_DisconnectDebug(PinName pin) |
<> | 160:d5399cc887bb | 110 | { |
<> | 160:d5399cc887bb | 111 | /* empty for now */ |
<> | 160:d5399cc887bb | 112 | } |
<> | 160:d5399cc887bb | 113 | |
<> | 160:d5399cc887bb | 114 | static inline void stm_pin_PullConfig(GPIO_TypeDef *gpio, uint32_t ll_pin, uint32_t pull_config) |
<> | 160:d5399cc887bb | 115 | { |
<> | 160:d5399cc887bb | 116 | switch (pull_config) { |
<> | 160:d5399cc887bb | 117 | case GPIO_PULLUP: |
<> | 160:d5399cc887bb | 118 | LL_GPIO_SetPinPull(gpio, ll_pin, LL_GPIO_PULL_UP); |
<> | 160:d5399cc887bb | 119 | break; |
<> | 160:d5399cc887bb | 120 | case GPIO_PULLDOWN: |
<> | 160:d5399cc887bb | 121 | LL_GPIO_SetPinPull(gpio, ll_pin, LL_GPIO_PULL_DOWN); |
<> | 160:d5399cc887bb | 122 | break; |
<> | 160:d5399cc887bb | 123 | default: |
<> | 160:d5399cc887bb | 124 | LL_GPIO_SetPinPull(gpio, ll_pin, LL_GPIO_PULL_NO); |
<> | 160:d5399cc887bb | 125 | break; |
<> | 160:d5399cc887bb | 126 | } |
<> | 160:d5399cc887bb | 127 | } |
<> | 160:d5399cc887bb | 128 | |
<> | 160:d5399cc887bb | 129 | static inline void stm_pin_SetAFPin( GPIO_TypeDef *gpio, PinName pin, uint32_t afnum) |
<> | 160:d5399cc887bb | 130 | { |
<> | 160:d5399cc887bb | 131 | uint32_t ll_pin = ll_pin_defines[STM_PIN(pin)]; |
<> | 160:d5399cc887bb | 132 | |
<> | 160:d5399cc887bb | 133 | if (STM_PIN(pin) > 7) |
<> | 160:d5399cc887bb | 134 | LL_GPIO_SetAFPin_8_15(gpio, ll_pin, afnum); |
<> | 160:d5399cc887bb | 135 | else |
<> | 160:d5399cc887bb | 136 | LL_GPIO_SetAFPin_0_7(gpio, ll_pin, afnum); |
<> | 160:d5399cc887bb | 137 | } |
<> | 160:d5399cc887bb | 138 | |
<> | 160:d5399cc887bb | 139 | #endif |