mbed library sources. Supersedes mbed-src.
Fork of mbed-dev by
targets/TARGET_NUVOTON/TARGET_M451/i2c_api.c@162:16168a1438f3, 2017-04-08 (annotated)
- Committer:
- funshine
- Date:
- Sat Apr 08 17:03:55 2017 +0000
- Revision:
- 162:16168a1438f3
- Parent:
- 160:d5399cc887bb
add code to handle serial port rx error in uart_irq()
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
<> | 149:156823d33999 | 1 | /* mbed Microcontroller Library |
<> | 149:156823d33999 | 2 | * Copyright (c) 2015-2016 Nuvoton |
<> | 149:156823d33999 | 3 | * |
<> | 149:156823d33999 | 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
<> | 149:156823d33999 | 5 | * you may not use this file except in compliance with the License. |
<> | 149:156823d33999 | 6 | * You may obtain a copy of the License at |
<> | 149:156823d33999 | 7 | * |
<> | 149:156823d33999 | 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
<> | 149:156823d33999 | 9 | * |
<> | 149:156823d33999 | 10 | * Unless required by applicable law or agreed to in writing, software |
<> | 149:156823d33999 | 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
<> | 149:156823d33999 | 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
<> | 149:156823d33999 | 13 | * See the License for the specific language governing permissions and |
<> | 149:156823d33999 | 14 | * limitations under the License. |
<> | 149:156823d33999 | 15 | */ |
<> | 149:156823d33999 | 16 | |
<> | 149:156823d33999 | 17 | #include "i2c_api.h" |
<> | 149:156823d33999 | 18 | |
<> | 149:156823d33999 | 19 | #if DEVICE_I2C |
<> | 149:156823d33999 | 20 | |
<> | 149:156823d33999 | 21 | #include "cmsis.h" |
<> | 149:156823d33999 | 22 | #include "pinmap.h" |
<> | 149:156823d33999 | 23 | #include "PeripheralPins.h" |
<> | 149:156823d33999 | 24 | #include "nu_modutil.h" |
<> | 149:156823d33999 | 25 | #include "nu_miscutil.h" |
<> | 149:156823d33999 | 26 | #include "nu_bitutil.h" |
<> | 160:d5399cc887bb | 27 | #include "mbed_critical.h" |
<> | 149:156823d33999 | 28 | |
<> | 149:156823d33999 | 29 | #define NU_I2C_DEBUG 0 |
<> | 149:156823d33999 | 30 | |
<> | 149:156823d33999 | 31 | #if NU_I2C_DEBUG |
<> | 149:156823d33999 | 32 | struct i2c_s MY_I2C; |
<> | 149:156823d33999 | 33 | struct i2c_s MY_I2C_2; |
<> | 149:156823d33999 | 34 | char MY_I2C_STATUS[64]; |
<> | 149:156823d33999 | 35 | int MY_I2C_STATUS_POS = 0; |
<> | 149:156823d33999 | 36 | uint32_t MY_I2C_TIMEOUT; |
<> | 149:156823d33999 | 37 | uint32_t MY_I2C_ELAPSED; |
<> | 149:156823d33999 | 38 | uint32_t MY_I2C_T1; |
<> | 149:156823d33999 | 39 | uint32_t MY_I2C_T2; |
<> | 149:156823d33999 | 40 | #endif |
<> | 149:156823d33999 | 41 | |
<> | 149:156823d33999 | 42 | struct nu_i2c_var { |
<> | 149:156823d33999 | 43 | i2c_t * obj; |
<> | 149:156823d33999 | 44 | void (*vec)(void); |
<> | 149:156823d33999 | 45 | }; |
<> | 149:156823d33999 | 46 | |
<> | 149:156823d33999 | 47 | static void i2c0_vec(void); |
<> | 149:156823d33999 | 48 | static void i2c1_vec(void); |
<> | 149:156823d33999 | 49 | static void i2c_irq(i2c_t *obj); |
<> | 149:156823d33999 | 50 | static void i2c_fsm_reset(i2c_t *obj, uint32_t i2c_ctl); |
<> | 153:fa9ff456f731 | 51 | static void i2c_fsm_tranfini(i2c_t *obj, int lastdatanaked); |
<> | 149:156823d33999 | 52 | |
<> | 149:156823d33999 | 53 | static struct nu_i2c_var i2c0_var = { |
<> | 149:156823d33999 | 54 | .obj = NULL, |
<> | 149:156823d33999 | 55 | .vec = i2c0_vec, |
<> | 149:156823d33999 | 56 | }; |
<> | 149:156823d33999 | 57 | static struct nu_i2c_var i2c1_var = { |
<> | 149:156823d33999 | 58 | .obj = NULL, |
<> | 149:156823d33999 | 59 | .vec = i2c1_vec, |
<> | 149:156823d33999 | 60 | }; |
<> | 149:156823d33999 | 61 | |
<> | 149:156823d33999 | 62 | static uint32_t i2c_modinit_mask = 0; |
<> | 149:156823d33999 | 63 | |
<> | 149:156823d33999 | 64 | static const struct nu_modinit_s i2c_modinit_tab[] = { |
<> | 149:156823d33999 | 65 | {I2C_0, I2C0_MODULE, 0, 0, I2C0_RST, I2C0_IRQn, &i2c0_var}, |
<> | 149:156823d33999 | 66 | {I2C_1, I2C1_MODULE, 0, 0, I2C1_RST, I2C1_IRQn, &i2c1_var}, |
<> | 149:156823d33999 | 67 | |
<> | 149:156823d33999 | 68 | {NC, 0, 0, 0, 0, (IRQn_Type) 0, NULL} |
<> | 149:156823d33999 | 69 | }; |
<> | 149:156823d33999 | 70 | |
<> | 149:156823d33999 | 71 | static int i2c_do_tran(i2c_t *obj, char *buf, int length, int read, int naklastdata); |
<> | 149:156823d33999 | 72 | static int i2c_do_trsn(i2c_t *obj, uint32_t i2c_ctl, int sync); |
<> | 149:156823d33999 | 73 | #define NU_I2C_TIMEOUT_STAT_INT 500000 |
<> | 149:156823d33999 | 74 | #define NU_I2C_TIMEOUT_STOP 500000 |
<> | 149:156823d33999 | 75 | static int i2c_poll_status_timeout(i2c_t *obj, int (*is_status)(i2c_t *obj), uint32_t timeout); |
<> | 149:156823d33999 | 76 | static int i2c_poll_tran_heatbeat_timeout(i2c_t *obj, uint32_t timeout); |
<> | 149:156823d33999 | 77 | //static int i2c_is_stat_int(i2c_t *obj); |
<> | 149:156823d33999 | 78 | //static int i2c_is_stop_det(i2c_t *obj); |
<> | 149:156823d33999 | 79 | static int i2c_is_trsn_done(i2c_t *obj); |
<> | 149:156823d33999 | 80 | static int i2c_is_tran_started(i2c_t *obj); |
<> | 149:156823d33999 | 81 | static int i2c_addr2data(int address, int read); |
<> | 149:156823d33999 | 82 | #if DEVICE_I2CSLAVE |
<> | 149:156823d33999 | 83 | // Convert mbed address to BSP address. |
<> | 149:156823d33999 | 84 | static int i2c_addr2bspaddr(int address); |
<> | 149:156823d33999 | 85 | #endif // #if DEVICE_I2CSLAVE |
<> | 149:156823d33999 | 86 | static void i2c_enable_int(i2c_t *obj); |
<> | 149:156823d33999 | 87 | static void i2c_disable_int(i2c_t *obj); |
<> | 149:156823d33999 | 88 | static int i2c_set_int(i2c_t *obj, int inten); |
<> | 149:156823d33999 | 89 | |
<> | 149:156823d33999 | 90 | |
<> | 149:156823d33999 | 91 | #if DEVICE_I2C_ASYNCH |
<> | 149:156823d33999 | 92 | static void i2c_buffer_set(i2c_t *obj, const void *tx, size_t tx_length, void *rx, size_t rx_length); |
<> | 149:156823d33999 | 93 | static void i2c_enable_vector_interrupt(i2c_t *obj, uint32_t handler, int enable); |
<> | 149:156823d33999 | 94 | static void i2c_rollback_vector_interrupt(i2c_t *obj); |
<> | 149:156823d33999 | 95 | #endif |
<> | 149:156823d33999 | 96 | |
<> | 149:156823d33999 | 97 | #define TRANCTRL_STARTED (1) |
<> | 149:156823d33999 | 98 | #define TRANCTRL_NAKLASTDATA (1 << 1) |
<> | 153:fa9ff456f731 | 99 | #define TRANCTRL_LASTDATANAKED (1 << 2) |
<> | 149:156823d33999 | 100 | |
<> | 149:156823d33999 | 101 | uint32_t us_ticker_read(void); |
<> | 149:156823d33999 | 102 | |
<> | 149:156823d33999 | 103 | void i2c_init(i2c_t *obj, PinName sda, PinName scl) |
<> | 149:156823d33999 | 104 | { |
<> | 149:156823d33999 | 105 | uint32_t i2c_sda = pinmap_peripheral(sda, PinMap_I2C_SDA); |
<> | 149:156823d33999 | 106 | uint32_t i2c_scl = pinmap_peripheral(scl, PinMap_I2C_SCL); |
<> | 149:156823d33999 | 107 | obj->i2c.i2c = (I2CName) pinmap_merge(i2c_sda, i2c_scl); |
<> | 149:156823d33999 | 108 | MBED_ASSERT((int)obj->i2c.i2c != NC); |
<> | 149:156823d33999 | 109 | |
<> | 149:156823d33999 | 110 | const struct nu_modinit_s *modinit = get_modinit(obj->i2c.i2c, i2c_modinit_tab); |
<> | 149:156823d33999 | 111 | MBED_ASSERT(modinit != NULL); |
<> | 149:156823d33999 | 112 | MBED_ASSERT(modinit->modname == obj->i2c.i2c); |
<> | 149:156823d33999 | 113 | |
<> | 149:156823d33999 | 114 | // Reset this module |
<> | 149:156823d33999 | 115 | SYS_ResetModule(modinit->rsetidx); |
<> | 149:156823d33999 | 116 | |
<> | 149:156823d33999 | 117 | // Enable IP clock |
<> | 149:156823d33999 | 118 | CLK_EnableModuleClock(modinit->clkidx); |
<> | 149:156823d33999 | 119 | |
<> | 149:156823d33999 | 120 | pinmap_pinout(sda, PinMap_I2C_SDA); |
<> | 149:156823d33999 | 121 | pinmap_pinout(scl, PinMap_I2C_SCL); |
<> | 149:156823d33999 | 122 | |
<> | 149:156823d33999 | 123 | #if DEVICE_I2C_ASYNCH |
<> | 149:156823d33999 | 124 | obj->i2c.dma_usage = DMA_USAGE_NEVER; |
<> | 149:156823d33999 | 125 | obj->i2c.event = 0; |
<> | 149:156823d33999 | 126 | obj->i2c.stop = 0; |
<> | 149:156823d33999 | 127 | obj->i2c.address = 0; |
<> | 149:156823d33999 | 128 | #endif |
<> | 149:156823d33999 | 129 | |
<> | 149:156823d33999 | 130 | // NOTE: Setting I2C bus clock to 100 KHz is required. See I2C::I2C in common/I2C.cpp. |
<> | 149:156823d33999 | 131 | I2C_Open((I2C_T *) NU_MODBASE(obj->i2c.i2c), 100000); |
<> | 149:156823d33999 | 132 | // NOTE: INTEN bit and FSM control bits (STA, STO, SI, AA) are packed in one register CTL. We cannot control interrupt through |
<> | 149:156823d33999 | 133 | // INTEN bit without impacting FSM control bits. Use NVIC_EnableIRQ/NVIC_DisableIRQ instead for interrupt control. |
<> | 149:156823d33999 | 134 | I2C_T *i2c_base = (I2C_T *) NU_MODBASE(obj->i2c.i2c); |
<> | 149:156823d33999 | 135 | i2c_base->CTL |= (I2C_CTL_INTEN_Msk | I2C_CTL_I2CEN_Msk); |
<> | 149:156823d33999 | 136 | |
<> | 149:156823d33999 | 137 | // Enable sync-moce vector interrupt. |
<> | 149:156823d33999 | 138 | struct nu_i2c_var *var = (struct nu_i2c_var *) modinit->var; |
<> | 149:156823d33999 | 139 | var->obj = obj; |
<> | 149:156823d33999 | 140 | obj->i2c.tran_ctrl = 0; |
<> | 149:156823d33999 | 141 | obj->i2c.stop = 0; |
<> | 149:156823d33999 | 142 | i2c_enable_vector_interrupt(obj, (uint32_t) var->vec, 1); |
<> | 149:156823d33999 | 143 | |
<> | 149:156823d33999 | 144 | // Mark this module to be inited. |
<> | 149:156823d33999 | 145 | int i = modinit - i2c_modinit_tab; |
<> | 149:156823d33999 | 146 | i2c_modinit_mask |= 1 << i; |
<> | 149:156823d33999 | 147 | } |
<> | 149:156823d33999 | 148 | |
<> | 149:156823d33999 | 149 | int i2c_start(i2c_t *obj) |
<> | 149:156823d33999 | 150 | { |
<> | 149:156823d33999 | 151 | return i2c_do_trsn(obj, I2C_CTL_STA_Msk | I2C_CTL_SI_Msk, 1); |
<> | 149:156823d33999 | 152 | } |
<> | 149:156823d33999 | 153 | |
<> | 149:156823d33999 | 154 | int i2c_stop(i2c_t *obj) |
<> | 149:156823d33999 | 155 | { |
<> | 149:156823d33999 | 156 | return i2c_do_trsn(obj, I2C_CTL_STO_Msk | I2C_CTL_SI_Msk, 1); |
<> | 149:156823d33999 | 157 | } |
<> | 149:156823d33999 | 158 | |
<> | 149:156823d33999 | 159 | void i2c_frequency(i2c_t *obj, int hz) |
<> | 149:156823d33999 | 160 | { |
<> | 149:156823d33999 | 161 | I2C_SetBusClockFreq((I2C_T *) NU_MODBASE(obj->i2c.i2c), hz); |
<> | 149:156823d33999 | 162 | } |
<> | 149:156823d33999 | 163 | |
<> | 149:156823d33999 | 164 | int i2c_read(i2c_t *obj, int address, char *data, int length, int stop) |
<> | 149:156823d33999 | 165 | { |
<> | 149:156823d33999 | 166 | if (i2c_start(obj)) { |
<> | 149:156823d33999 | 167 | i2c_stop(obj); |
<> | 149:156823d33999 | 168 | return I2C_ERROR_BUS_BUSY; |
<> | 149:156823d33999 | 169 | } |
<> | 149:156823d33999 | 170 | |
<> | 153:fa9ff456f731 | 171 | if (i2c_byte_write(obj, i2c_addr2data(address, 1)) != 1) { |
<> | 149:156823d33999 | 172 | i2c_stop(obj); |
<> | 149:156823d33999 | 173 | return I2C_ERROR_NO_SLAVE; |
<> | 149:156823d33999 | 174 | } |
<> | 149:156823d33999 | 175 | |
<> | 149:156823d33999 | 176 | // Read in bytes |
<> | 149:156823d33999 | 177 | length = i2c_do_tran(obj, data, length, 1, 1); |
<> | 149:156823d33999 | 178 | |
<> | 149:156823d33999 | 179 | // If not repeated start, send stop. |
<> | 149:156823d33999 | 180 | if (stop) { |
<> | 149:156823d33999 | 181 | i2c_stop(obj); |
<> | 149:156823d33999 | 182 | } |
<> | 149:156823d33999 | 183 | |
<> | 149:156823d33999 | 184 | return length; |
<> | 149:156823d33999 | 185 | } |
<> | 149:156823d33999 | 186 | |
<> | 149:156823d33999 | 187 | int i2c_write(i2c_t *obj, int address, const char *data, int length, int stop) |
<> | 149:156823d33999 | 188 | { |
<> | 149:156823d33999 | 189 | if (i2c_start(obj)) { |
<> | 149:156823d33999 | 190 | i2c_stop(obj); |
<> | 149:156823d33999 | 191 | return I2C_ERROR_BUS_BUSY; |
<> | 149:156823d33999 | 192 | } |
<> | 149:156823d33999 | 193 | |
<> | 153:fa9ff456f731 | 194 | if (i2c_byte_write(obj, i2c_addr2data(address, 0)) != 1) { |
<> | 149:156823d33999 | 195 | i2c_stop(obj); |
<> | 149:156823d33999 | 196 | return I2C_ERROR_NO_SLAVE; |
<> | 149:156823d33999 | 197 | } |
<> | 149:156823d33999 | 198 | |
<> | 149:156823d33999 | 199 | // Write out bytes |
<> | 149:156823d33999 | 200 | length = i2c_do_tran(obj, (char *) data, length, 0, 1); |
<> | 149:156823d33999 | 201 | |
<> | 149:156823d33999 | 202 | if (stop) { |
<> | 149:156823d33999 | 203 | i2c_stop(obj); |
<> | 149:156823d33999 | 204 | } |
<> | 149:156823d33999 | 205 | |
<> | 149:156823d33999 | 206 | return length; |
<> | 149:156823d33999 | 207 | } |
<> | 149:156823d33999 | 208 | |
<> | 149:156823d33999 | 209 | void i2c_reset(i2c_t *obj) |
<> | 149:156823d33999 | 210 | { |
<> | 149:156823d33999 | 211 | i2c_stop(obj); |
<> | 149:156823d33999 | 212 | } |
<> | 149:156823d33999 | 213 | |
<> | 149:156823d33999 | 214 | int i2c_byte_read(i2c_t *obj, int last) |
<> | 149:156823d33999 | 215 | { |
<> | 149:156823d33999 | 216 | char data = 0; |
<> | 153:fa9ff456f731 | 217 | i2c_do_tran(obj, &data, 1, 1, last); |
<> | 149:156823d33999 | 218 | return data; |
<> | 149:156823d33999 | 219 | } |
<> | 149:156823d33999 | 220 | |
<> | 149:156823d33999 | 221 | int i2c_byte_write(i2c_t *obj, int data) |
<> | 149:156823d33999 | 222 | { |
<> | 153:fa9ff456f731 | 223 | char data_[1]; |
<> | 153:fa9ff456f731 | 224 | data_[0] = data & 0xFF; |
<> | 153:fa9ff456f731 | 225 | |
<> | 153:fa9ff456f731 | 226 | if (i2c_do_tran(obj, data_, 1, 0, 0) == 1 && |
<> | 153:fa9ff456f731 | 227 | ! (obj->i2c.tran_ctrl & TRANCTRL_LASTDATANAKED)) { |
<> | 153:fa9ff456f731 | 228 | return 1; |
<> | 153:fa9ff456f731 | 229 | } |
<> | 153:fa9ff456f731 | 230 | else { |
<> | 153:fa9ff456f731 | 231 | return 0; |
<> | 153:fa9ff456f731 | 232 | } |
<> | 149:156823d33999 | 233 | } |
<> | 149:156823d33999 | 234 | |
<> | 149:156823d33999 | 235 | #if DEVICE_I2CSLAVE |
<> | 149:156823d33999 | 236 | |
<> | 149:156823d33999 | 237 | // See I2CSlave.h |
<> | 149:156823d33999 | 238 | #define NoData 0 // the slave has not been addressed |
<> | 149:156823d33999 | 239 | #define ReadAddressed 1 // the master has requested a read from this slave (slave = transmitter) |
<> | 149:156823d33999 | 240 | #define WriteGeneral 2 // the master is writing to all slave |
<> | 149:156823d33999 | 241 | #define WriteAddressed 3 // the master is writing to this slave (slave = receiver) |
<> | 149:156823d33999 | 242 | |
<> | 149:156823d33999 | 243 | void i2c_slave_mode(i2c_t *obj, int enable_slave) |
<> | 149:156823d33999 | 244 | { |
<> | 149:156823d33999 | 245 | I2C_T *i2c_base = (I2C_T *) NU_MODBASE(obj->i2c.i2c); |
<> | 149:156823d33999 | 246 | |
<> | 149:156823d33999 | 247 | i2c_disable_int(obj); |
<> | 149:156823d33999 | 248 | |
<> | 149:156823d33999 | 249 | obj->i2c.slaveaddr_state = NoData; |
<> | 149:156823d33999 | 250 | |
<> | 149:156823d33999 | 251 | // Switch to not addressed mode |
<> | 149:156823d33999 | 252 | I2C_SET_CONTROL_REG(i2c_base, I2C_CTL_SI_Msk | I2C_CTL_AA_Msk); |
<> | 149:156823d33999 | 253 | |
<> | 149:156823d33999 | 254 | i2c_enable_int(obj); |
<> | 149:156823d33999 | 255 | } |
<> | 149:156823d33999 | 256 | |
<> | 149:156823d33999 | 257 | int i2c_slave_receive(i2c_t *obj) |
<> | 149:156823d33999 | 258 | { |
<> | 149:156823d33999 | 259 | int slaveaddr_state; |
<> | 149:156823d33999 | 260 | |
<> | 149:156823d33999 | 261 | i2c_disable_int(obj); |
<> | 149:156823d33999 | 262 | slaveaddr_state = obj->i2c.slaveaddr_state; |
<> | 149:156823d33999 | 263 | i2c_enable_int(obj); |
<> | 149:156823d33999 | 264 | |
<> | 149:156823d33999 | 265 | return slaveaddr_state; |
<> | 149:156823d33999 | 266 | } |
<> | 149:156823d33999 | 267 | |
<> | 149:156823d33999 | 268 | int i2c_slave_read(i2c_t *obj, char *data, int length) |
<> | 149:156823d33999 | 269 | { |
<> | 149:156823d33999 | 270 | return i2c_do_tran(obj, data, length, 1, 1); |
<> | 149:156823d33999 | 271 | } |
<> | 149:156823d33999 | 272 | |
<> | 149:156823d33999 | 273 | int i2c_slave_write(i2c_t *obj, const char *data, int length) |
<> | 149:156823d33999 | 274 | { |
<> | 149:156823d33999 | 275 | return i2c_do_tran(obj, (char *) data, length, 0, 1); |
<> | 149:156823d33999 | 276 | } |
<> | 149:156823d33999 | 277 | |
<> | 149:156823d33999 | 278 | void i2c_slave_address(i2c_t *obj, int idx, uint32_t address, uint32_t mask) |
<> | 149:156823d33999 | 279 | { |
<> | 149:156823d33999 | 280 | I2C_T *i2c_base = (I2C_T *) NU_MODBASE(obj->i2c.i2c); |
<> | 149:156823d33999 | 281 | |
<> | 149:156823d33999 | 282 | i2c_disable_int(obj); |
<> | 149:156823d33999 | 283 | |
<> | 149:156823d33999 | 284 | I2C_SetSlaveAddr(i2c_base, 0, i2c_addr2bspaddr(address), I2C_GCMODE_ENABLE); |
<> | 149:156823d33999 | 285 | |
<> | 149:156823d33999 | 286 | i2c_enable_int(obj); |
<> | 149:156823d33999 | 287 | } |
<> | 149:156823d33999 | 288 | |
<> | 149:156823d33999 | 289 | static int i2c_addr2bspaddr(int address) |
<> | 149:156823d33999 | 290 | { |
<> | 149:156823d33999 | 291 | return (address >> 1); |
<> | 149:156823d33999 | 292 | } |
<> | 149:156823d33999 | 293 | |
<> | 149:156823d33999 | 294 | #endif // #if DEVICE_I2CSLAVE |
<> | 149:156823d33999 | 295 | |
<> | 149:156823d33999 | 296 | static void i2c_enable_int(i2c_t *obj) |
<> | 149:156823d33999 | 297 | { |
<> | 149:156823d33999 | 298 | const struct nu_modinit_s *modinit = get_modinit(obj->i2c.i2c, i2c_modinit_tab); |
<> | 149:156823d33999 | 299 | |
<> | 149:156823d33999 | 300 | core_util_critical_section_enter(); |
<> | 149:156823d33999 | 301 | |
<> | 149:156823d33999 | 302 | // Enable I2C interrupt |
<> | 149:156823d33999 | 303 | NVIC_EnableIRQ(modinit->irq_n); |
<> | 149:156823d33999 | 304 | obj->i2c.inten = 1; |
<> | 149:156823d33999 | 305 | |
<> | 149:156823d33999 | 306 | core_util_critical_section_exit(); |
<> | 149:156823d33999 | 307 | } |
<> | 149:156823d33999 | 308 | |
<> | 149:156823d33999 | 309 | static void i2c_disable_int(i2c_t *obj) |
<> | 149:156823d33999 | 310 | { |
<> | 149:156823d33999 | 311 | const struct nu_modinit_s *modinit = get_modinit(obj->i2c.i2c, i2c_modinit_tab); |
<> | 149:156823d33999 | 312 | |
<> | 149:156823d33999 | 313 | core_util_critical_section_enter(); |
<> | 149:156823d33999 | 314 | |
<> | 149:156823d33999 | 315 | // Disable I2C interrupt |
<> | 149:156823d33999 | 316 | NVIC_DisableIRQ(modinit->irq_n); |
<> | 149:156823d33999 | 317 | obj->i2c.inten = 0; |
<> | 149:156823d33999 | 318 | |
<> | 149:156823d33999 | 319 | core_util_critical_section_exit(); |
<> | 149:156823d33999 | 320 | } |
<> | 149:156823d33999 | 321 | |
<> | 149:156823d33999 | 322 | static int i2c_set_int(i2c_t *obj, int inten) |
<> | 149:156823d33999 | 323 | { |
<> | 149:156823d33999 | 324 | int inten_back; |
<> | 149:156823d33999 | 325 | |
<> | 149:156823d33999 | 326 | core_util_critical_section_enter(); |
<> | 149:156823d33999 | 327 | |
<> | 149:156823d33999 | 328 | inten_back = obj->i2c.inten; |
<> | 149:156823d33999 | 329 | |
<> | 149:156823d33999 | 330 | core_util_critical_section_exit(); |
<> | 149:156823d33999 | 331 | |
<> | 149:156823d33999 | 332 | if (inten) { |
<> | 149:156823d33999 | 333 | i2c_enable_int(obj); |
<> | 149:156823d33999 | 334 | } |
<> | 149:156823d33999 | 335 | else { |
<> | 149:156823d33999 | 336 | i2c_disable_int(obj); |
<> | 149:156823d33999 | 337 | } |
<> | 149:156823d33999 | 338 | |
<> | 149:156823d33999 | 339 | return inten_back; |
<> | 149:156823d33999 | 340 | } |
<> | 149:156823d33999 | 341 | |
<> | 149:156823d33999 | 342 | int i2c_allow_powerdown(void) |
<> | 149:156823d33999 | 343 | { |
<> | 149:156823d33999 | 344 | uint32_t modinit_mask = i2c_modinit_mask; |
<> | 149:156823d33999 | 345 | while (modinit_mask) { |
<> | 149:156823d33999 | 346 | int i2c_idx = nu_ctz(modinit_mask); |
<> | 149:156823d33999 | 347 | const struct nu_modinit_s *modinit = i2c_modinit_tab + i2c_idx; |
<> | 149:156823d33999 | 348 | struct nu_i2c_var *var = (struct nu_i2c_var *) modinit->var; |
<> | 149:156823d33999 | 349 | if (var->obj) { |
<> | 149:156823d33999 | 350 | // Disallow entering power-down mode if I2C transfer is enabled. |
<> | 149:156823d33999 | 351 | if (i2c_active(var->obj)) { |
<> | 149:156823d33999 | 352 | return 0; |
<> | 149:156823d33999 | 353 | } |
<> | 149:156823d33999 | 354 | } |
<> | 149:156823d33999 | 355 | modinit_mask &= ~(1 << i2c_idx); |
<> | 149:156823d33999 | 356 | } |
<> | 149:156823d33999 | 357 | |
<> | 149:156823d33999 | 358 | return 1; |
<> | 149:156823d33999 | 359 | } |
<> | 149:156823d33999 | 360 | |
<> | 149:156823d33999 | 361 | static int i2c_do_tran(i2c_t *obj, char *buf, int length, int read, int naklastdata) |
<> | 149:156823d33999 | 362 | { |
<> | 153:fa9ff456f731 | 363 | if (! buf || ! length) { |
<> | 153:fa9ff456f731 | 364 | return 0; |
<> | 153:fa9ff456f731 | 365 | } |
<> | 153:fa9ff456f731 | 366 | |
<> | 149:156823d33999 | 367 | int tran_len = 0; |
<> | 149:156823d33999 | 368 | |
<> | 149:156823d33999 | 369 | i2c_disable_int(obj); |
<> | 149:156823d33999 | 370 | obj->i2c.tran_ctrl = naklastdata ? (TRANCTRL_STARTED | TRANCTRL_NAKLASTDATA) : TRANCTRL_STARTED; |
<> | 149:156823d33999 | 371 | obj->i2c.tran_beg = buf; |
<> | 149:156823d33999 | 372 | obj->i2c.tran_pos = buf; |
<> | 149:156823d33999 | 373 | obj->i2c.tran_end = buf + length; |
<> | 149:156823d33999 | 374 | i2c_enable_int(obj); |
<> | 149:156823d33999 | 375 | |
<> | 149:156823d33999 | 376 | if (i2c_poll_tran_heatbeat_timeout(obj, NU_I2C_TIMEOUT_STAT_INT)) { |
<> | 149:156823d33999 | 377 | #if NU_I2C_DEBUG |
<> | 149:156823d33999 | 378 | MY_I2C_2 = obj->i2c; |
<> | 149:156823d33999 | 379 | while (1); |
<> | 149:156823d33999 | 380 | #endif |
<> | 149:156823d33999 | 381 | } |
<> | 149:156823d33999 | 382 | else { |
<> | 149:156823d33999 | 383 | i2c_disable_int(obj); |
<> | 149:156823d33999 | 384 | tran_len = obj->i2c.tran_pos - obj->i2c.tran_beg; |
<> | 149:156823d33999 | 385 | obj->i2c.tran_beg = NULL; |
<> | 149:156823d33999 | 386 | obj->i2c.tran_pos = NULL; |
<> | 149:156823d33999 | 387 | obj->i2c.tran_end = NULL; |
<> | 149:156823d33999 | 388 | i2c_enable_int(obj); |
<> | 149:156823d33999 | 389 | } |
<> | 149:156823d33999 | 390 | |
<> | 149:156823d33999 | 391 | return tran_len; |
<> | 149:156823d33999 | 392 | } |
<> | 149:156823d33999 | 393 | |
<> | 149:156823d33999 | 394 | static int i2c_do_trsn(i2c_t *obj, uint32_t i2c_ctl, int sync) |
<> | 149:156823d33999 | 395 | { |
<> | 149:156823d33999 | 396 | I2C_T *i2c_base = (I2C_T *) NU_MODBASE(obj->i2c.i2c); |
<> | 149:156823d33999 | 397 | int err = 0; |
<> | 149:156823d33999 | 398 | |
<> | 149:156823d33999 | 399 | i2c_disable_int(obj); |
<> | 149:156823d33999 | 400 | |
<> | 149:156823d33999 | 401 | if (i2c_poll_status_timeout(obj, i2c_is_trsn_done, NU_I2C_TIMEOUT_STAT_INT)) { |
<> | 149:156823d33999 | 402 | err = I2C_ERROR_BUS_BUSY; |
<> | 149:156823d33999 | 403 | #if NU_I2C_DEBUG |
<> | 149:156823d33999 | 404 | MY_I2C_2 = obj->i2c; |
<> | 149:156823d33999 | 405 | while (1); |
<> | 149:156823d33999 | 406 | #endif |
<> | 149:156823d33999 | 407 | } |
<> | 149:156823d33999 | 408 | else { |
<> | 149:156823d33999 | 409 | #if 1 |
<> | 149:156823d33999 | 410 | // NOTE: Avoid duplicate Start/Stop. Otherwise, we may meet strange error. |
<> | 149:156823d33999 | 411 | uint32_t status = I2C_GET_STATUS(i2c_base); |
<> | 149:156823d33999 | 412 | |
<> | 149:156823d33999 | 413 | switch (status) { |
<> | 149:156823d33999 | 414 | case 0x08: // Start |
<> | 149:156823d33999 | 415 | case 0x10: // Master Repeat Start |
<> | 149:156823d33999 | 416 | if (i2c_ctl & I2C_CTL_STA_Msk) { |
<> | 149:156823d33999 | 417 | return 0; |
<> | 149:156823d33999 | 418 | } |
<> | 149:156823d33999 | 419 | else { |
<> | 149:156823d33999 | 420 | break; |
<> | 149:156823d33999 | 421 | } |
<> | 149:156823d33999 | 422 | case 0xF8: // Bus Released |
<> | 149:156823d33999 | 423 | if (i2c_ctl & (I2C_CTL_STA_Msk | I2C_CTL_STO_Msk) == I2C_CTL_STO_Msk) { |
<> | 149:156823d33999 | 424 | return 0; |
<> | 149:156823d33999 | 425 | } |
<> | 149:156823d33999 | 426 | else { |
<> | 149:156823d33999 | 427 | break; |
<> | 149:156823d33999 | 428 | } |
<> | 149:156823d33999 | 429 | } |
<> | 149:156823d33999 | 430 | #endif |
<> | 149:156823d33999 | 431 | I2C_SET_CONTROL_REG(i2c_base, i2c_ctl); |
<> | 149:156823d33999 | 432 | if (sync && i2c_poll_status_timeout(obj, i2c_is_trsn_done, NU_I2C_TIMEOUT_STAT_INT)) { |
<> | 149:156823d33999 | 433 | err = I2C_ERROR_BUS_BUSY; |
<> | 149:156823d33999 | 434 | #if NU_I2C_DEBUG |
<> | 149:156823d33999 | 435 | MY_I2C_2 = obj->i2c; |
<> | 149:156823d33999 | 436 | while (1); |
<> | 149:156823d33999 | 437 | #endif |
<> | 149:156823d33999 | 438 | } |
<> | 149:156823d33999 | 439 | } |
<> | 149:156823d33999 | 440 | |
<> | 149:156823d33999 | 441 | i2c_enable_int(obj); |
<> | 149:156823d33999 | 442 | |
<> | 149:156823d33999 | 443 | return err; |
<> | 149:156823d33999 | 444 | } |
<> | 149:156823d33999 | 445 | |
<> | 149:156823d33999 | 446 | static int i2c_poll_status_timeout(i2c_t *obj, int (*is_status)(i2c_t *obj), uint32_t timeout) |
<> | 149:156823d33999 | 447 | { |
<> | 149:156823d33999 | 448 | uint32_t t1, t2, elapsed = 0; |
<> | 149:156823d33999 | 449 | int status_assert = 0; |
<> | 149:156823d33999 | 450 | |
<> | 149:156823d33999 | 451 | t1 = us_ticker_read(); |
<> | 149:156823d33999 | 452 | while (1) { |
<> | 149:156823d33999 | 453 | status_assert = is_status(obj); |
<> | 149:156823d33999 | 454 | if (status_assert) { |
<> | 149:156823d33999 | 455 | break; |
<> | 149:156823d33999 | 456 | } |
<> | 149:156823d33999 | 457 | |
<> | 149:156823d33999 | 458 | t2 = us_ticker_read(); |
<> | 149:156823d33999 | 459 | elapsed = (t2 > t1) ? (t2 - t1) : ((uint64_t) t2 + 0xFFFFFFFF - t1 + 1); |
<> | 149:156823d33999 | 460 | if (elapsed >= timeout) { |
<> | 149:156823d33999 | 461 | #if NU_I2C_DEBUG |
<> | 149:156823d33999 | 462 | MY_I2C_T1 = t1; |
<> | 149:156823d33999 | 463 | MY_I2C_T2 = t2; |
<> | 149:156823d33999 | 464 | MY_I2C_ELAPSED = elapsed; |
<> | 149:156823d33999 | 465 | MY_I2C_TIMEOUT = timeout; |
<> | 149:156823d33999 | 466 | MY_I2C_2 = obj->i2c; |
<> | 149:156823d33999 | 467 | while (1); |
<> | 149:156823d33999 | 468 | #endif |
<> | 149:156823d33999 | 469 | break; |
<> | 149:156823d33999 | 470 | } |
<> | 149:156823d33999 | 471 | } |
<> | 149:156823d33999 | 472 | |
<> | 149:156823d33999 | 473 | return (elapsed >= timeout); |
<> | 149:156823d33999 | 474 | } |
<> | 149:156823d33999 | 475 | |
<> | 149:156823d33999 | 476 | static int i2c_poll_tran_heatbeat_timeout(i2c_t *obj, uint32_t timeout) |
<> | 149:156823d33999 | 477 | { |
<> | 149:156823d33999 | 478 | uint32_t t1, t2, elapsed = 0; |
<> | 149:156823d33999 | 479 | int tran_started; |
<> | 149:156823d33999 | 480 | char *tran_pos = NULL; |
<> | 149:156823d33999 | 481 | char *tran_pos2 = NULL; |
<> | 149:156823d33999 | 482 | |
<> | 149:156823d33999 | 483 | i2c_disable_int(obj); |
<> | 149:156823d33999 | 484 | tran_pos = obj->i2c.tran_pos; |
<> | 149:156823d33999 | 485 | i2c_enable_int(obj); |
<> | 149:156823d33999 | 486 | t1 = us_ticker_read(); |
<> | 149:156823d33999 | 487 | while (1) { |
<> | 149:156823d33999 | 488 | i2c_disable_int(obj); |
<> | 149:156823d33999 | 489 | tran_started = i2c_is_tran_started(obj); |
<> | 149:156823d33999 | 490 | i2c_enable_int(obj); |
<> | 149:156823d33999 | 491 | if (! tran_started) { // Transfer completed or stopped |
<> | 149:156823d33999 | 492 | break; |
<> | 149:156823d33999 | 493 | } |
<> | 149:156823d33999 | 494 | |
<> | 149:156823d33999 | 495 | i2c_disable_int(obj); |
<> | 149:156823d33999 | 496 | tran_pos2 = obj->i2c.tran_pos; |
<> | 149:156823d33999 | 497 | i2c_enable_int(obj); |
<> | 149:156823d33999 | 498 | t2 = us_ticker_read(); |
<> | 149:156823d33999 | 499 | if (tran_pos2 != tran_pos) { // Transfer on-going |
<> | 149:156823d33999 | 500 | t1 = t2; |
<> | 149:156823d33999 | 501 | tran_pos = tran_pos2; |
<> | 149:156823d33999 | 502 | continue; |
<> | 149:156823d33999 | 503 | } |
<> | 149:156823d33999 | 504 | |
<> | 149:156823d33999 | 505 | elapsed = (t2 > t1) ? (t2 - t1) : ((uint64_t) t2 + 0xFFFFFFFF - t1 + 1); |
<> | 149:156823d33999 | 506 | if (elapsed >= timeout) { // Transfer idle |
<> | 149:156823d33999 | 507 | #if NU_I2C_DEBUG |
<> | 149:156823d33999 | 508 | MY_I2C = obj->i2c; |
<> | 149:156823d33999 | 509 | MY_I2C_T1 = t1; |
<> | 149:156823d33999 | 510 | MY_I2C_T2 = t2; |
<> | 149:156823d33999 | 511 | MY_I2C_ELAPSED = elapsed; |
<> | 149:156823d33999 | 512 | MY_I2C_TIMEOUT = timeout; |
<> | 149:156823d33999 | 513 | MY_I2C_2 = obj->i2c; |
<> | 149:156823d33999 | 514 | while (1); |
<> | 149:156823d33999 | 515 | #endif |
<> | 149:156823d33999 | 516 | break; |
<> | 149:156823d33999 | 517 | } |
<> | 149:156823d33999 | 518 | } |
<> | 149:156823d33999 | 519 | |
<> | 149:156823d33999 | 520 | return (elapsed >= timeout); |
<> | 149:156823d33999 | 521 | } |
<> | 149:156823d33999 | 522 | |
<> | 149:156823d33999 | 523 | #if 0 |
<> | 149:156823d33999 | 524 | static int i2c_is_stat_int(i2c_t *obj) |
<> | 149:156823d33999 | 525 | { |
<> | 149:156823d33999 | 526 | I2C_T *i2c_base = (I2C_T *) NU_MODBASE(obj->i2c.i2c); |
<> | 149:156823d33999 | 527 | |
<> | 149:156823d33999 | 528 | return !! (i2c_base->CTL & I2C_CTL_SI_Msk); |
<> | 149:156823d33999 | 529 | } |
<> | 149:156823d33999 | 530 | |
<> | 149:156823d33999 | 531 | static int i2c_is_stop_det(i2c_t *obj) |
<> | 149:156823d33999 | 532 | { |
<> | 149:156823d33999 | 533 | I2C_T *i2c_base = (I2C_T *) NU_MODBASE(obj->i2c.i2c); |
<> | 149:156823d33999 | 534 | |
<> | 149:156823d33999 | 535 | return ! (i2c_base->CTL & I2C_CTL_STO_Msk); |
<> | 149:156823d33999 | 536 | } |
<> | 149:156823d33999 | 537 | #endif |
<> | 149:156823d33999 | 538 | |
<> | 149:156823d33999 | 539 | static int i2c_is_trsn_done(i2c_t *obj) |
<> | 149:156823d33999 | 540 | { |
<> | 149:156823d33999 | 541 | I2C_T *i2c_base = (I2C_T *) NU_MODBASE(obj->i2c.i2c); |
<> | 149:156823d33999 | 542 | int i2c_int; |
<> | 149:156823d33999 | 543 | uint32_t status; |
<> | 149:156823d33999 | 544 | int inten_back; |
<> | 149:156823d33999 | 545 | |
<> | 149:156823d33999 | 546 | inten_back = i2c_set_int(obj, 0); |
<> | 149:156823d33999 | 547 | i2c_int = !! (i2c_base->CTL & I2C_CTL_SI_Msk); |
<> | 149:156823d33999 | 548 | status = I2C_GET_STATUS(i2c_base); |
<> | 149:156823d33999 | 549 | i2c_set_int(obj, inten_back); |
<> | 149:156823d33999 | 550 | |
<> | 149:156823d33999 | 551 | return (i2c_int || status == 0xF8); |
<> | 149:156823d33999 | 552 | } |
<> | 149:156823d33999 | 553 | |
<> | 149:156823d33999 | 554 | static int i2c_is_tran_started(i2c_t *obj) |
<> | 149:156823d33999 | 555 | { |
<> | 149:156823d33999 | 556 | int started; |
<> | 149:156823d33999 | 557 | int inten_back; |
<> | 149:156823d33999 | 558 | |
<> | 149:156823d33999 | 559 | inten_back = i2c_set_int(obj, 0); |
<> | 149:156823d33999 | 560 | started = !! (obj->i2c.tran_ctrl & TRANCTRL_STARTED); |
<> | 149:156823d33999 | 561 | i2c_set_int(obj, inten_back); |
<> | 149:156823d33999 | 562 | |
<> | 149:156823d33999 | 563 | return started; |
<> | 149:156823d33999 | 564 | } |
<> | 149:156823d33999 | 565 | |
<> | 149:156823d33999 | 566 | static int i2c_addr2data(int address, int read) |
<> | 149:156823d33999 | 567 | { |
<> | 149:156823d33999 | 568 | return read ? (address | 1) : (address & 0xFE); |
<> | 149:156823d33999 | 569 | } |
<> | 149:156823d33999 | 570 | |
<> | 149:156823d33999 | 571 | static void i2c0_vec(void) |
<> | 149:156823d33999 | 572 | { |
<> | 149:156823d33999 | 573 | i2c_irq(i2c0_var.obj); |
<> | 149:156823d33999 | 574 | } |
<> | 149:156823d33999 | 575 | static void i2c1_vec(void) |
<> | 149:156823d33999 | 576 | { |
<> | 149:156823d33999 | 577 | i2c_irq(i2c1_var.obj); |
<> | 149:156823d33999 | 578 | } |
<> | 149:156823d33999 | 579 | |
<> | 149:156823d33999 | 580 | static void i2c_irq(i2c_t *obj) |
<> | 149:156823d33999 | 581 | { |
<> | 149:156823d33999 | 582 | I2C_T *i2c_base = (I2C_T *) NU_MODBASE(obj->i2c.i2c); |
<> | 149:156823d33999 | 583 | uint32_t status; |
<> | 149:156823d33999 | 584 | |
<> | 149:156823d33999 | 585 | if (I2C_GET_TIMEOUT_FLAG(i2c_base)) { |
<> | 149:156823d33999 | 586 | I2C_ClearTimeoutFlag(i2c_base); |
<> | 149:156823d33999 | 587 | return; |
<> | 149:156823d33999 | 588 | } |
<> | 149:156823d33999 | 589 | |
<> | 149:156823d33999 | 590 | status = I2C_GET_STATUS(i2c_base); |
<> | 149:156823d33999 | 591 | #if NU_I2C_DEBUG |
<> | 149:156823d33999 | 592 | if (MY_I2C_STATUS_POS < (sizeof (MY_I2C_STATUS) / sizeof (MY_I2C_STATUS[0]))) { |
<> | 149:156823d33999 | 593 | MY_I2C_STATUS[MY_I2C_STATUS_POS ++] = status; |
<> | 149:156823d33999 | 594 | } |
<> | 149:156823d33999 | 595 | else { |
<> | 149:156823d33999 | 596 | memset(MY_I2C_STATUS, 0x00, sizeof (MY_I2C_STATUS)); |
<> | 149:156823d33999 | 597 | MY_I2C_STATUS_POS = 0; |
<> | 149:156823d33999 | 598 | } |
<> | 149:156823d33999 | 599 | #endif |
<> | 149:156823d33999 | 600 | |
<> | 149:156823d33999 | 601 | switch (status) { |
<> | 149:156823d33999 | 602 | // Master Transmit |
<> | 149:156823d33999 | 603 | case 0x28: // Master Transmit Data ACK |
<> | 149:156823d33999 | 604 | case 0x18: // Master Transmit Address ACK |
<> | 149:156823d33999 | 605 | case 0x08: // Start |
<> | 149:156823d33999 | 606 | case 0x10: // Master Repeat Start |
<> | 149:156823d33999 | 607 | if ((obj->i2c.tran_ctrl & TRANCTRL_STARTED) && obj->i2c.tran_pos) { |
<> | 149:156823d33999 | 608 | if (obj->i2c.tran_pos < obj->i2c.tran_end) { |
<> | 149:156823d33999 | 609 | I2C_SET_DATA(i2c_base, *obj->i2c.tran_pos ++); |
<> | 149:156823d33999 | 610 | I2C_SET_CONTROL_REG(i2c_base, I2C_CTL_SI_Msk | I2C_CTL_AA_Msk); |
<> | 149:156823d33999 | 611 | } |
<> | 149:156823d33999 | 612 | else { |
<> | 153:fa9ff456f731 | 613 | i2c_fsm_tranfini(obj, 0); |
<> | 149:156823d33999 | 614 | } |
<> | 149:156823d33999 | 615 | } |
<> | 149:156823d33999 | 616 | else { |
<> | 149:156823d33999 | 617 | i2c_disable_int(obj); |
<> | 149:156823d33999 | 618 | } |
<> | 149:156823d33999 | 619 | break; |
<> | 153:fa9ff456f731 | 620 | |
<> | 149:156823d33999 | 621 | case 0x30: // Master Transmit Data NACK |
<> | 153:fa9ff456f731 | 622 | i2c_fsm_tranfini(obj, 1); |
<> | 153:fa9ff456f731 | 623 | break; |
<> | 153:fa9ff456f731 | 624 | |
<> | 149:156823d33999 | 625 | case 0x20: // Master Transmit Address NACK |
<> | 153:fa9ff456f731 | 626 | i2c_fsm_tranfini(obj, 1); |
<> | 149:156823d33999 | 627 | break; |
<> | 153:fa9ff456f731 | 628 | |
<> | 149:156823d33999 | 629 | case 0x38: // Master Arbitration Lost |
<> | 149:156823d33999 | 630 | i2c_fsm_reset(obj, I2C_CTL_SI_Msk | I2C_CTL_AA_Msk); |
<> | 149:156823d33999 | 631 | break; |
<> | 149:156823d33999 | 632 | |
<> | 149:156823d33999 | 633 | case 0x48: // Master Receive Address NACK |
<> | 153:fa9ff456f731 | 634 | i2c_fsm_tranfini(obj, 1); |
<> | 149:156823d33999 | 635 | break; |
<> | 153:fa9ff456f731 | 636 | |
<> | 149:156823d33999 | 637 | case 0x40: // Master Receive Address ACK |
<> | 149:156823d33999 | 638 | case 0x50: // Master Receive Data ACK |
<> | 149:156823d33999 | 639 | case 0x58: // Master Receive Data NACK |
<> | 149:156823d33999 | 640 | if ((obj->i2c.tran_ctrl & TRANCTRL_STARTED) && obj->i2c.tran_pos) { |
<> | 149:156823d33999 | 641 | if (obj->i2c.tran_pos < obj->i2c.tran_end) { |
<> | 149:156823d33999 | 642 | if (status == 0x50 || status == 0x58) { |
<> | 149:156823d33999 | 643 | *obj->i2c.tran_pos ++ = I2C_GET_DATA(i2c_base); |
<> | 149:156823d33999 | 644 | } |
<> | 149:156823d33999 | 645 | |
<> | 149:156823d33999 | 646 | if (status == 0x58) { |
<> | 149:156823d33999 | 647 | #if NU_I2C_DEBUG |
<> | 149:156823d33999 | 648 | if (obj->i2c.tran_pos != obj->i2c.tran_end) { |
<> | 149:156823d33999 | 649 | MY_I2C = obj->i2c; |
<> | 149:156823d33999 | 650 | while (1); |
<> | 149:156823d33999 | 651 | } |
<> | 149:156823d33999 | 652 | #endif |
<> | 153:fa9ff456f731 | 653 | i2c_fsm_tranfini(obj, 1); |
<> | 149:156823d33999 | 654 | } |
<> | 149:156823d33999 | 655 | else { |
<> | 149:156823d33999 | 656 | uint32_t i2c_ctl = I2C_CTL_SI_Msk | I2C_CTL_AA_Msk; |
<> | 149:156823d33999 | 657 | if ((obj->i2c.tran_end - obj->i2c.tran_pos) == 1 && |
<> | 149:156823d33999 | 658 | obj->i2c.tran_ctrl & TRANCTRL_NAKLASTDATA) { |
<> | 149:156823d33999 | 659 | // Last data |
<> | 149:156823d33999 | 660 | i2c_ctl &= ~I2C_CTL_AA_Msk; |
<> | 149:156823d33999 | 661 | } |
<> | 149:156823d33999 | 662 | I2C_SET_CONTROL_REG(i2c_base, i2c_ctl); |
<> | 149:156823d33999 | 663 | } |
<> | 149:156823d33999 | 664 | } |
<> | 149:156823d33999 | 665 | else { |
<> | 149:156823d33999 | 666 | obj->i2c.tran_ctrl &= ~TRANCTRL_STARTED; |
<> | 149:156823d33999 | 667 | i2c_disable_int(obj); |
<> | 149:156823d33999 | 668 | break; |
<> | 149:156823d33999 | 669 | } |
<> | 149:156823d33999 | 670 | } |
<> | 149:156823d33999 | 671 | else { |
<> | 149:156823d33999 | 672 | i2c_disable_int(obj); |
<> | 149:156823d33999 | 673 | } |
<> | 149:156823d33999 | 674 | break; |
<> | 149:156823d33999 | 675 | |
<> | 149:156823d33999 | 676 | //case 0x00: // Bus error |
<> | 149:156823d33999 | 677 | |
<> | 149:156823d33999 | 678 | // Slave Transmit |
<> | 149:156823d33999 | 679 | case 0xB8: // Slave Transmit Data ACK |
<> | 149:156823d33999 | 680 | case 0xA8: // Slave Transmit Address ACK |
<> | 149:156823d33999 | 681 | case 0xB0: // Slave Transmit Arbitration Lost |
<> | 149:156823d33999 | 682 | if ((obj->i2c.tran_ctrl & TRANCTRL_STARTED) && obj->i2c.tran_pos) { |
<> | 149:156823d33999 | 683 | if (obj->i2c.tran_pos < obj->i2c.tran_end) { |
<> | 149:156823d33999 | 684 | uint32_t i2c_ctl = I2C_CTL_SI_Msk | I2C_CTL_AA_Msk; |
<> | 149:156823d33999 | 685 | |
<> | 149:156823d33999 | 686 | I2C_SET_DATA(i2c_base, *obj->i2c.tran_pos ++); |
<> | 149:156823d33999 | 687 | if (obj->i2c.tran_pos == obj->i2c.tran_end && |
<> | 149:156823d33999 | 688 | obj->i2c.tran_ctrl & TRANCTRL_NAKLASTDATA) { |
<> | 149:156823d33999 | 689 | // Last data |
<> | 149:156823d33999 | 690 | i2c_ctl &= ~I2C_CTL_AA_Msk; |
<> | 149:156823d33999 | 691 | } |
<> | 149:156823d33999 | 692 | I2C_SET_CONTROL_REG(i2c_base, i2c_ctl); |
<> | 149:156823d33999 | 693 | } |
<> | 149:156823d33999 | 694 | else { |
<> | 149:156823d33999 | 695 | obj->i2c.tran_ctrl &= ~TRANCTRL_STARTED; |
<> | 149:156823d33999 | 696 | i2c_disable_int(obj); |
<> | 149:156823d33999 | 697 | break; |
<> | 149:156823d33999 | 698 | } |
<> | 149:156823d33999 | 699 | } |
<> | 149:156823d33999 | 700 | else { |
<> | 149:156823d33999 | 701 | i2c_disable_int(obj); |
<> | 149:156823d33999 | 702 | } |
<> | 149:156823d33999 | 703 | obj->i2c.slaveaddr_state = ReadAddressed; |
<> | 149:156823d33999 | 704 | break; |
<> | 149:156823d33999 | 705 | //case 0xA0: // Slave Transmit Repeat Start or Stop |
<> | 149:156823d33999 | 706 | case 0xC0: // Slave Transmit Data NACK |
<> | 149:156823d33999 | 707 | case 0xC8: // Slave Transmit Last Data ACK |
<> | 149:156823d33999 | 708 | obj->i2c.slaveaddr_state = NoData; |
<> | 149:156823d33999 | 709 | i2c_fsm_reset(obj, I2C_CTL_SI_Msk | I2C_CTL_AA_Msk); |
<> | 149:156823d33999 | 710 | break; |
<> | 149:156823d33999 | 711 | |
<> | 149:156823d33999 | 712 | // Slave Receive |
<> | 149:156823d33999 | 713 | case 0x80: // Slave Receive Data ACK |
<> | 149:156823d33999 | 714 | case 0x88: // Slave Receive Data NACK |
<> | 149:156823d33999 | 715 | case 0x60: // Slave Receive Address ACK |
<> | 149:156823d33999 | 716 | case 0x68: // Slave Receive Arbitration Lost |
<> | 149:156823d33999 | 717 | obj->i2c.slaveaddr_state = WriteAddressed; |
<> | 149:156823d33999 | 718 | if ((obj->i2c.tran_ctrl & TRANCTRL_STARTED) && obj->i2c.tran_pos) { |
<> | 149:156823d33999 | 719 | if (obj->i2c.tran_pos < obj->i2c.tran_end) { |
<> | 149:156823d33999 | 720 | if (status == 0x80 || status == 0x88) { |
<> | 149:156823d33999 | 721 | *obj->i2c.tran_pos ++ = I2C_GET_DATA(i2c_base); |
<> | 149:156823d33999 | 722 | } |
<> | 149:156823d33999 | 723 | |
<> | 149:156823d33999 | 724 | if (status == 0x88) { |
<> | 149:156823d33999 | 725 | #if NU_I2C_DEBUG |
<> | 149:156823d33999 | 726 | if (obj->i2c.tran_pos != obj->i2c.tran_end) { |
<> | 149:156823d33999 | 727 | MY_I2C = obj->i2c; |
<> | 149:156823d33999 | 728 | while (1); |
<> | 149:156823d33999 | 729 | } |
<> | 149:156823d33999 | 730 | #endif |
<> | 149:156823d33999 | 731 | obj->i2c.slaveaddr_state = NoData; |
<> | 149:156823d33999 | 732 | i2c_fsm_reset(obj, I2C_CTL_SI_Msk | I2C_CTL_AA_Msk); |
<> | 149:156823d33999 | 733 | } |
<> | 149:156823d33999 | 734 | else { |
<> | 149:156823d33999 | 735 | uint32_t i2c_ctl = I2C_CTL_SI_Msk | I2C_CTL_AA_Msk; |
<> | 149:156823d33999 | 736 | if ((obj->i2c.tran_end - obj->i2c.tran_pos) == 1 && |
<> | 149:156823d33999 | 737 | obj->i2c.tran_ctrl & TRANCTRL_NAKLASTDATA) { |
<> | 149:156823d33999 | 738 | // Last data |
<> | 149:156823d33999 | 739 | i2c_ctl &= ~I2C_CTL_AA_Msk; |
<> | 149:156823d33999 | 740 | } |
<> | 149:156823d33999 | 741 | I2C_SET_CONTROL_REG(i2c_base, i2c_ctl); |
<> | 149:156823d33999 | 742 | } |
<> | 149:156823d33999 | 743 | } |
<> | 149:156823d33999 | 744 | else { |
<> | 149:156823d33999 | 745 | obj->i2c.tran_ctrl &= ~TRANCTRL_STARTED; |
<> | 149:156823d33999 | 746 | i2c_disable_int(obj); |
<> | 149:156823d33999 | 747 | break; |
<> | 149:156823d33999 | 748 | } |
<> | 149:156823d33999 | 749 | } |
<> | 149:156823d33999 | 750 | else { |
<> | 149:156823d33999 | 751 | i2c_disable_int(obj); |
<> | 149:156823d33999 | 752 | } |
<> | 149:156823d33999 | 753 | break; |
<> | 149:156823d33999 | 754 | //case 0xA0: // Slave Receive Repeat Start or Stop |
<> | 149:156823d33999 | 755 | |
<> | 149:156823d33999 | 756 | // GC mode |
<> | 149:156823d33999 | 757 | //case 0xA0: // GC mode Repeat Start or Stop |
<> | 149:156823d33999 | 758 | case 0x90: // GC mode Data ACK |
<> | 149:156823d33999 | 759 | case 0x98: // GC mode Data NACK |
<> | 149:156823d33999 | 760 | case 0x70: // GC mode Address ACK |
<> | 149:156823d33999 | 761 | case 0x78: // GC mode Arbitration Lost |
<> | 149:156823d33999 | 762 | obj->i2c.slaveaddr_state = WriteAddressed; |
<> | 149:156823d33999 | 763 | if ((obj->i2c.tran_ctrl & TRANCTRL_STARTED) && obj->i2c.tran_pos) { |
<> | 149:156823d33999 | 764 | if (obj->i2c.tran_pos < obj->i2c.tran_end) { |
<> | 149:156823d33999 | 765 | if (status == 0x90 || status == 0x98) { |
<> | 149:156823d33999 | 766 | *obj->i2c.tran_pos ++ = I2C_GET_DATA(i2c_base); |
<> | 149:156823d33999 | 767 | } |
<> | 149:156823d33999 | 768 | |
<> | 149:156823d33999 | 769 | if (status == 0x98) { |
<> | 149:156823d33999 | 770 | #if NU_I2C_DEBUG |
<> | 149:156823d33999 | 771 | if (obj->i2c.tran_pos != obj->i2c.tran_end) { |
<> | 149:156823d33999 | 772 | MY_I2C = obj->i2c; |
<> | 149:156823d33999 | 773 | while (1); |
<> | 149:156823d33999 | 774 | } |
<> | 149:156823d33999 | 775 | #endif |
<> | 149:156823d33999 | 776 | obj->i2c.slaveaddr_state = NoData; |
<> | 149:156823d33999 | 777 | i2c_fsm_reset(obj, I2C_CTL_SI_Msk | I2C_CTL_AA_Msk); |
<> | 149:156823d33999 | 778 | } |
<> | 149:156823d33999 | 779 | else { |
<> | 149:156823d33999 | 780 | uint32_t i2c_ctl = I2C_CTL_SI_Msk | I2C_CTL_AA_Msk; |
<> | 149:156823d33999 | 781 | if ((obj->i2c.tran_end - obj->i2c.tran_pos) == 1 && |
<> | 149:156823d33999 | 782 | obj->i2c.tran_ctrl & TRANCTRL_NAKLASTDATA) { |
<> | 149:156823d33999 | 783 | // Last data |
<> | 149:156823d33999 | 784 | i2c_ctl &= ~I2C_CTL_AA_Msk; |
<> | 149:156823d33999 | 785 | } |
<> | 149:156823d33999 | 786 | I2C_SET_CONTROL_REG(i2c_base, i2c_ctl); |
<> | 149:156823d33999 | 787 | } |
<> | 149:156823d33999 | 788 | } |
<> | 149:156823d33999 | 789 | else { |
<> | 149:156823d33999 | 790 | obj->i2c.tran_ctrl &= ~TRANCTRL_STARTED; |
<> | 149:156823d33999 | 791 | i2c_disable_int(obj); |
<> | 149:156823d33999 | 792 | break; |
<> | 149:156823d33999 | 793 | } |
<> | 149:156823d33999 | 794 | } |
<> | 149:156823d33999 | 795 | else { |
<> | 149:156823d33999 | 796 | i2c_disable_int(obj); |
<> | 149:156823d33999 | 797 | } |
<> | 149:156823d33999 | 798 | break; |
<> | 149:156823d33999 | 799 | |
<> | 149:156823d33999 | 800 | case 0xF8: // Bus Released |
<> | 149:156823d33999 | 801 | break; |
<> | 149:156823d33999 | 802 | |
<> | 149:156823d33999 | 803 | default: |
<> | 149:156823d33999 | 804 | i2c_fsm_reset(obj, I2C_CTL_SI_Msk | I2C_CTL_AA_Msk); |
<> | 149:156823d33999 | 805 | } |
<> | 149:156823d33999 | 806 | } |
<> | 149:156823d33999 | 807 | |
<> | 149:156823d33999 | 808 | static void i2c_fsm_reset(i2c_t *obj, uint32_t i2c_ctl) |
<> | 149:156823d33999 | 809 | { |
<> | 149:156823d33999 | 810 | I2C_T *i2c_base = (I2C_T *) NU_MODBASE(obj->i2c.i2c); |
<> | 149:156823d33999 | 811 | |
<> | 149:156823d33999 | 812 | obj->i2c.stop = 0; |
<> | 149:156823d33999 | 813 | |
<> | 149:156823d33999 | 814 | obj->i2c.tran_ctrl = 0; |
<> | 149:156823d33999 | 815 | |
<> | 149:156823d33999 | 816 | I2C_SET_CONTROL_REG(i2c_base, i2c_ctl); |
<> | 149:156823d33999 | 817 | obj->i2c.slaveaddr_state = NoData; |
<> | 149:156823d33999 | 818 | } |
<> | 149:156823d33999 | 819 | |
<> | 153:fa9ff456f731 | 820 | static void i2c_fsm_tranfini(i2c_t *obj, int lastdatanaked) |
<> | 153:fa9ff456f731 | 821 | { |
<> | 153:fa9ff456f731 | 822 | if (lastdatanaked) { |
<> | 153:fa9ff456f731 | 823 | obj->i2c.tran_ctrl |= TRANCTRL_LASTDATANAKED; |
<> | 153:fa9ff456f731 | 824 | } |
<> | 153:fa9ff456f731 | 825 | |
<> | 153:fa9ff456f731 | 826 | obj->i2c.tran_ctrl &= ~TRANCTRL_STARTED; |
<> | 153:fa9ff456f731 | 827 | i2c_disable_int(obj); |
<> | 153:fa9ff456f731 | 828 | } |
<> | 153:fa9ff456f731 | 829 | |
<> | 149:156823d33999 | 830 | #if DEVICE_I2C_ASYNCH |
<> | 149:156823d33999 | 831 | |
<> | 149:156823d33999 | 832 | void i2c_transfer_asynch(i2c_t *obj, const void *tx, size_t tx_length, void *rx, size_t rx_length, uint32_t address, uint32_t stop, uint32_t handler, uint32_t event, DMAUsage hint) |
<> | 149:156823d33999 | 833 | { |
<> | 149:156823d33999 | 834 | // NOTE: M451 I2C only supports 7-bit slave address. The mbed I2C address passed in is shifted left by 1 bit (7-bit addr << 1). |
<> | 149:156823d33999 | 835 | MBED_ASSERT((address & 0xFFFFFF00) == 0); |
<> | 149:156823d33999 | 836 | |
<> | 149:156823d33999 | 837 | // NOTE: First transmit and then receive. |
<> | 149:156823d33999 | 838 | |
<> | 149:156823d33999 | 839 | (void) hint; |
<> | 149:156823d33999 | 840 | obj->i2c.dma_usage = DMA_USAGE_NEVER; |
<> | 149:156823d33999 | 841 | obj->i2c.stop = stop; |
<> | 149:156823d33999 | 842 | obj->i2c.address = address; |
<> | 149:156823d33999 | 843 | obj->i2c.event = event; |
<> | 149:156823d33999 | 844 | i2c_buffer_set(obj, tx, tx_length, rx, rx_length); |
<> | 149:156823d33999 | 845 | |
<> | 149:156823d33999 | 846 | //I2C_T *i2c_base = (I2C_T *) NU_MODBASE(obj->i2c.i2c); |
<> | 149:156823d33999 | 847 | |
<> | 149:156823d33999 | 848 | i2c_enable_vector_interrupt(obj, handler, 1); |
<> | 149:156823d33999 | 849 | i2c_start(obj); |
<> | 149:156823d33999 | 850 | } |
<> | 149:156823d33999 | 851 | |
<> | 149:156823d33999 | 852 | uint32_t i2c_irq_handler_asynch(i2c_t *obj) |
<> | 149:156823d33999 | 853 | { |
<> | 149:156823d33999 | 854 | int event = 0; |
<> | 149:156823d33999 | 855 | |
<> | 149:156823d33999 | 856 | I2C_T *i2c_base = (I2C_T *) NU_MODBASE(obj->i2c.i2c); |
<> | 149:156823d33999 | 857 | uint32_t status = I2C_GET_STATUS(i2c_base); |
<> | 149:156823d33999 | 858 | switch (status) { |
<> | 149:156823d33999 | 859 | case 0x08: // Start |
<> | 149:156823d33999 | 860 | case 0x10: {// Master Repeat Start |
<> | 149:156823d33999 | 861 | if (obj->tx_buff.buffer && obj->tx_buff.pos < obj->tx_buff.length) { |
<> | 149:156823d33999 | 862 | I2C_SET_DATA(i2c_base, (i2c_addr2data(obj->i2c.address, 0))); |
<> | 149:156823d33999 | 863 | I2C_SET_CONTROL_REG(i2c_base, I2C_CTL_SI_Msk); |
<> | 149:156823d33999 | 864 | } |
<> | 149:156823d33999 | 865 | else if (obj->rx_buff.buffer && obj->rx_buff.pos < obj->rx_buff.length) { |
<> | 149:156823d33999 | 866 | I2C_SET_DATA(i2c_base, (i2c_addr2data(obj->i2c.address, 1))); |
<> | 149:156823d33999 | 867 | I2C_SET_CONTROL_REG(i2c_base, I2C_CTL_SI_Msk); |
<> | 149:156823d33999 | 868 | } |
<> | 149:156823d33999 | 869 | else { |
<> | 149:156823d33999 | 870 | event = I2C_EVENT_TRANSFER_COMPLETE; |
<> | 149:156823d33999 | 871 | if (obj->i2c.stop) { |
<> | 149:156823d33999 | 872 | I2C_SET_CONTROL_REG(i2c_base, I2C_CTL_STO_Msk | I2C_CTL_SI_Msk); |
<> | 149:156823d33999 | 873 | } |
<> | 149:156823d33999 | 874 | } |
<> | 149:156823d33999 | 875 | break; |
<> | 149:156823d33999 | 876 | } |
<> | 149:156823d33999 | 877 | |
<> | 149:156823d33999 | 878 | case 0x18: // Master Transmit Address ACK |
<> | 149:156823d33999 | 879 | case 0x28: // Master Transmit Data ACK |
<> | 149:156823d33999 | 880 | if (obj->tx_buff.buffer && obj->tx_buff.pos < obj->tx_buff.length) { |
<> | 149:156823d33999 | 881 | uint8_t *tx = (uint8_t *)obj->tx_buff.buffer; |
<> | 149:156823d33999 | 882 | I2C_SET_DATA(i2c_base, tx[obj->tx_buff.pos ++]); |
<> | 149:156823d33999 | 883 | I2C_SET_CONTROL_REG(i2c_base, I2C_CTL_SI_Msk); |
<> | 149:156823d33999 | 884 | } |
<> | 149:156823d33999 | 885 | else if (obj->rx_buff.buffer && obj->rx_buff.pos < obj->rx_buff.length) { |
<> | 149:156823d33999 | 886 | I2C_SET_CONTROL_REG(i2c_base, I2C_CTL_STA_Msk | I2C_CTL_SI_Msk); |
<> | 149:156823d33999 | 887 | } |
<> | 149:156823d33999 | 888 | else { |
<> | 149:156823d33999 | 889 | event = I2C_EVENT_TRANSFER_COMPLETE; |
<> | 149:156823d33999 | 890 | if (obj->i2c.stop) { |
<> | 149:156823d33999 | 891 | I2C_SET_CONTROL_REG(i2c_base, I2C_CTL_STO_Msk | I2C_CTL_SI_Msk); |
<> | 149:156823d33999 | 892 | } |
<> | 149:156823d33999 | 893 | } |
<> | 149:156823d33999 | 894 | break; |
<> | 149:156823d33999 | 895 | |
<> | 149:156823d33999 | 896 | case 0x20: // Master Transmit Address NACK |
<> | 149:156823d33999 | 897 | event = I2C_EVENT_ERROR_NO_SLAVE; |
<> | 149:156823d33999 | 898 | if (obj->i2c.stop) { |
<> | 149:156823d33999 | 899 | I2C_SET_CONTROL_REG(i2c_base, I2C_CTL_STO_Msk | I2C_CTL_SI_Msk); |
<> | 149:156823d33999 | 900 | } |
<> | 149:156823d33999 | 901 | break; |
<> | 149:156823d33999 | 902 | |
<> | 149:156823d33999 | 903 | case 0x30: // Master Transmit Data NACK |
<> | 149:156823d33999 | 904 | if (obj->tx_buff.buffer && obj->tx_buff.pos < obj->tx_buff.length) { |
<> | 149:156823d33999 | 905 | event = I2C_EVENT_TRANSFER_EARLY_NACK; |
<> | 149:156823d33999 | 906 | I2C_SET_CONTROL_REG(i2c_base, I2C_CTL_STO_Msk | I2C_CTL_SI_Msk); |
<> | 149:156823d33999 | 907 | } |
<> | 149:156823d33999 | 908 | else if (obj->rx_buff.buffer && obj->rx_buff.pos < obj->rx_buff.length) { |
<> | 149:156823d33999 | 909 | I2C_SET_CONTROL_REG(i2c_base, I2C_CTL_STA_Msk | I2C_CTL_SI_Msk); |
<> | 149:156823d33999 | 910 | } |
<> | 149:156823d33999 | 911 | else { |
<> | 149:156823d33999 | 912 | event = I2C_EVENT_TRANSFER_COMPLETE; |
<> | 149:156823d33999 | 913 | if (obj->i2c.stop) { |
<> | 149:156823d33999 | 914 | I2C_SET_CONTROL_REG(i2c_base, I2C_CTL_STO_Msk | I2C_CTL_SI_Msk); |
<> | 149:156823d33999 | 915 | } |
<> | 149:156823d33999 | 916 | } |
<> | 149:156823d33999 | 917 | break; |
<> | 149:156823d33999 | 918 | |
<> | 149:156823d33999 | 919 | case 0x38: // Master Arbitration Lost |
<> | 149:156823d33999 | 920 | I2C_SET_CONTROL_REG(i2c_base, I2C_CTL_SI_Msk); // Enter not addressed SLV mode |
<> | 149:156823d33999 | 921 | event = I2C_EVENT_ERROR; |
<> | 149:156823d33999 | 922 | break; |
<> | 149:156823d33999 | 923 | |
<> | 149:156823d33999 | 924 | case 0x50: // Master Receive Data ACK |
<> | 149:156823d33999 | 925 | if (obj->rx_buff.buffer && obj->rx_buff.pos < obj->rx_buff.length) { |
<> | 149:156823d33999 | 926 | uint8_t *rx = (uint8_t *) obj->rx_buff.buffer; |
<> | 149:156823d33999 | 927 | rx[obj->rx_buff.pos ++] = I2C_GET_DATA(((I2C_T *) NU_MODBASE(obj->i2c.i2c))); |
<> | 149:156823d33999 | 928 | } |
<> | 149:156823d33999 | 929 | case 0x40: // Master Receive Address ACK |
<> | 149:156823d33999 | 930 | I2C_SET_CONTROL_REG(i2c_base, I2C_CTL_SI_Msk | ((obj->rx_buff.pos != obj->rx_buff.length - 1) ? I2C_CTL_AA_Msk : 0)); |
<> | 149:156823d33999 | 931 | break; |
<> | 149:156823d33999 | 932 | |
<> | 149:156823d33999 | 933 | case 0x48: // Master Receive Address NACK |
<> | 149:156823d33999 | 934 | event = I2C_EVENT_ERROR_NO_SLAVE; |
<> | 149:156823d33999 | 935 | if (obj->i2c.stop) { |
<> | 149:156823d33999 | 936 | I2C_SET_CONTROL_REG(i2c_base, I2C_CTL_STO_Msk | I2C_CTL_SI_Msk); |
<> | 149:156823d33999 | 937 | } |
<> | 149:156823d33999 | 938 | break; |
<> | 149:156823d33999 | 939 | |
<> | 149:156823d33999 | 940 | case 0x58: // Master Receive Data NACK |
<> | 149:156823d33999 | 941 | if (obj->rx_buff.buffer && obj->rx_buff.pos < obj->rx_buff.length) { |
<> | 149:156823d33999 | 942 | uint8_t *rx = (uint8_t *) obj->rx_buff.buffer; |
<> | 149:156823d33999 | 943 | rx[obj->rx_buff.pos ++] = I2C_GET_DATA(((I2C_T *) NU_MODBASE(obj->i2c.i2c))); |
<> | 149:156823d33999 | 944 | } |
<> | 149:156823d33999 | 945 | I2C_SET_CONTROL_REG(i2c_base, I2C_CTL_STA_Msk | I2C_CTL_SI_Msk); |
<> | 149:156823d33999 | 946 | break; |
<> | 149:156823d33999 | 947 | |
<> | 149:156823d33999 | 948 | case 0x00: // Bus error |
<> | 149:156823d33999 | 949 | event = I2C_EVENT_ERROR; |
<> | 149:156823d33999 | 950 | i2c_reset(obj); |
<> | 149:156823d33999 | 951 | break; |
<> | 149:156823d33999 | 952 | |
<> | 149:156823d33999 | 953 | default: |
<> | 149:156823d33999 | 954 | event = I2C_EVENT_ERROR; |
<> | 149:156823d33999 | 955 | if (obj->i2c.stop) { |
<> | 149:156823d33999 | 956 | I2C_SET_CONTROL_REG(i2c_base, I2C_CTL_STO_Msk | I2C_CTL_SI_Msk); |
<> | 149:156823d33999 | 957 | } |
<> | 149:156823d33999 | 958 | } |
<> | 149:156823d33999 | 959 | |
<> | 149:156823d33999 | 960 | if (event) { |
<> | 149:156823d33999 | 961 | i2c_rollback_vector_interrupt(obj); |
<> | 149:156823d33999 | 962 | } |
<> | 149:156823d33999 | 963 | |
<> | 149:156823d33999 | 964 | return (event & obj->i2c.event); |
<> | 149:156823d33999 | 965 | } |
<> | 149:156823d33999 | 966 | |
<> | 149:156823d33999 | 967 | uint8_t i2c_active(i2c_t *obj) |
<> | 149:156823d33999 | 968 | { |
<> | 149:156823d33999 | 969 | const struct nu_modinit_s *modinit = get_modinit(obj->i2c.i2c, i2c_modinit_tab); |
<> | 149:156823d33999 | 970 | MBED_ASSERT(modinit != NULL); |
<> | 149:156823d33999 | 971 | MBED_ASSERT(modinit->modname == obj->i2c.i2c); |
<> | 149:156823d33999 | 972 | |
<> | 149:156823d33999 | 973 | // Vector will be changed for async transfer. Use it to judge if async transfer is on-going. |
<> | 149:156823d33999 | 974 | uint32_t vec = NVIC_GetVector(modinit->irq_n); |
<> | 149:156823d33999 | 975 | struct nu_i2c_var *var = (struct nu_i2c_var *) modinit->var; |
<> | 149:156823d33999 | 976 | return (vec && vec != (uint32_t) var->vec); |
<> | 149:156823d33999 | 977 | } |
<> | 149:156823d33999 | 978 | |
<> | 149:156823d33999 | 979 | void i2c_abort_asynch(i2c_t *obj) |
<> | 149:156823d33999 | 980 | { |
<> | 149:156823d33999 | 981 | i2c_rollback_vector_interrupt(obj); |
<> | 149:156823d33999 | 982 | i2c_stop(obj); |
<> | 149:156823d33999 | 983 | } |
<> | 149:156823d33999 | 984 | |
<> | 149:156823d33999 | 985 | static void i2c_buffer_set(i2c_t *obj, const void *tx, size_t tx_length, void *rx, size_t rx_length) |
<> | 149:156823d33999 | 986 | { |
<> | 149:156823d33999 | 987 | obj->tx_buff.buffer = (void *) tx; |
<> | 149:156823d33999 | 988 | obj->tx_buff.length = tx_length; |
<> | 149:156823d33999 | 989 | obj->tx_buff.pos = 0; |
<> | 149:156823d33999 | 990 | obj->rx_buff.buffer = rx; |
<> | 149:156823d33999 | 991 | obj->rx_buff.length = rx_length; |
<> | 149:156823d33999 | 992 | obj->rx_buff.pos = 0; |
<> | 149:156823d33999 | 993 | } |
<> | 149:156823d33999 | 994 | |
<> | 149:156823d33999 | 995 | static void i2c_enable_vector_interrupt(i2c_t *obj, uint32_t handler, int enable) |
<> | 149:156823d33999 | 996 | { |
<> | 149:156823d33999 | 997 | const struct nu_modinit_s *modinit = get_modinit(obj->i2c.i2c, i2c_modinit_tab); |
<> | 149:156823d33999 | 998 | MBED_ASSERT(modinit != NULL); |
<> | 149:156823d33999 | 999 | MBED_ASSERT(modinit->modname == obj->i2c.i2c); |
<> | 149:156823d33999 | 1000 | |
<> | 149:156823d33999 | 1001 | if (enable) { |
<> | 149:156823d33999 | 1002 | NVIC_SetVector(modinit->irq_n, handler); |
<> | 149:156823d33999 | 1003 | i2c_enable_int(obj); |
<> | 149:156823d33999 | 1004 | } |
<> | 149:156823d33999 | 1005 | else { |
<> | 149:156823d33999 | 1006 | i2c_disable_int(obj); |
<> | 149:156823d33999 | 1007 | } |
<> | 149:156823d33999 | 1008 | |
<> | 149:156823d33999 | 1009 | } |
<> | 149:156823d33999 | 1010 | |
<> | 149:156823d33999 | 1011 | static void i2c_rollback_vector_interrupt(i2c_t *obj) |
<> | 149:156823d33999 | 1012 | { |
<> | 149:156823d33999 | 1013 | const struct nu_modinit_s *modinit = get_modinit(obj->i2c.i2c, i2c_modinit_tab); |
<> | 149:156823d33999 | 1014 | MBED_ASSERT(modinit != NULL); |
<> | 149:156823d33999 | 1015 | MBED_ASSERT(modinit->modname == obj->i2c.i2c); |
<> | 149:156823d33999 | 1016 | |
<> | 149:156823d33999 | 1017 | struct nu_i2c_var *var = (struct nu_i2c_var *) modinit->var; |
<> | 149:156823d33999 | 1018 | i2c_enable_vector_interrupt(obj, (uint32_t) var->vec, 1); |
<> | 149:156823d33999 | 1019 | } |
<> | 149:156823d33999 | 1020 | |
<> | 149:156823d33999 | 1021 | #endif |
<> | 149:156823d33999 | 1022 | |
<> | 149:156823d33999 | 1023 | #endif |