These are the examples provided for [[/users/frank26080115/libraries/LPC1700CMSIS_Lib/]] Note, the entire "program" is not compilable!
WDT/INTERRUPT/abstract.h@0:bf7b9fba3924, 2011-03-20 (annotated)
- Committer:
- frank26080115
- Date:
- Sun Mar 20 05:38:56 2011 +0000
- Revision:
- 0:bf7b9fba3924
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
frank26080115 | 0:bf7b9fba3924 | 1 | ******************** (C) COPYRIGHT 2010 NXPSemiconductors ******************* |
frank26080115 | 0:bf7b9fba3924 | 2 | * @file WDT\INTERRUPT\abstract.txt |
frank26080115 | 0:bf7b9fba3924 | 3 | * @author NXP MCU SW Application Team |
frank26080115 | 0:bf7b9fba3924 | 4 | * @version 2.0 |
frank26080115 | 0:bf7b9fba3924 | 5 | * @date |
frank26080115 | 0:bf7b9fba3924 | 6 | * @brief Description of the WDT Interrupt example. |
frank26080115 | 0:bf7b9fba3924 | 7 | ****************************************************************************** |
frank26080115 | 0:bf7b9fba3924 | 8 | * Software that is described herein is for illustrative purposes only |
frank26080115 | 0:bf7b9fba3924 | 9 | * which provides customers with programming information regarding the |
frank26080115 | 0:bf7b9fba3924 | 10 | * products. This software is supplied "AS IS" without any warranties. |
frank26080115 | 0:bf7b9fba3924 | 11 | * NXP Semiconductors assumes no responsibility or liability for the |
frank26080115 | 0:bf7b9fba3924 | 12 | * use of the software, conveys no license or title under any patent, |
frank26080115 | 0:bf7b9fba3924 | 13 | * copyright, or mask work right to the product. NXP Semiconductors |
frank26080115 | 0:bf7b9fba3924 | 14 | * reserves the right to make changes in the software without |
frank26080115 | 0:bf7b9fba3924 | 15 | * notification. NXP Semiconductors also make no representation or |
frank26080115 | 0:bf7b9fba3924 | 16 | * warranty that such application will be suitable for the specified |
frank26080115 | 0:bf7b9fba3924 | 17 | * use without further testing or modification. |
frank26080115 | 0:bf7b9fba3924 | 18 | ****************************************************************************** |
frank26080115 | 0:bf7b9fba3924 | 19 | |
frank26080115 | 0:bf7b9fba3924 | 20 | @Example description: |
frank26080115 | 0:bf7b9fba3924 | 21 | Purpose: |
frank26080115 | 0:bf7b9fba3924 | 22 | This example describes how to use WDT to generate interrupt after a specific time. |
frank26080115 | 0:bf7b9fba3924 | 23 | Process: |
frank26080115 | 0:bf7b9fba3924 | 24 | In this example, WDT disables reset function, WDT just generates interrupt when the |
frank26080115 | 0:bf7b9fba3924 | 25 | Watchdog times out. |
frank26080115 | 0:bf7b9fba3924 | 26 | WDT setting: |
frank26080115 | 0:bf7b9fba3924 | 27 | - clock source: IRC (Internal RC oscillator) |
frank26080115 | 0:bf7b9fba3924 | 28 | - time-out = 5000000us = 5s |
frank26080115 | 0:bf7b9fba3924 | 29 | Before WDT interrupt, current value of Watchdog timer will be written continuously |
frank26080115 | 0:bf7b9fba3924 | 30 | into serial display (these value will be decreased from 5000000 to 0). After 5s, |
frank26080115 | 0:bf7b9fba3924 | 31 | the Watchdog timer times out, WDT interrupt sevice routine 'WDT_IRQHandler( )' will |
frank26080115 | 0:bf7b9fba3924 | 32 | be invoked to change 'wdt_flag'. The notice sentence will be display and LED begin blinky. |
frank26080115 | 0:bf7b9fba3924 | 33 | |
frank26080115 | 0:bf7b9fba3924 | 34 | Note that: dispaly data via UART will caused delay. |
frank26080115 | 0:bf7b9fba3924 | 35 | |
frank26080115 | 0:bf7b9fba3924 | 36 | @Directory contents: |
frank26080115 | 0:bf7b9fba3924 | 37 | \EWARM: includes EWARM (IAR) project and configuration files |
frank26080115 | 0:bf7b9fba3924 | 38 | \Keil: includes RVMDK (Keil)project and configuration files |
frank26080115 | 0:bf7b9fba3924 | 39 | |
frank26080115 | 0:bf7b9fba3924 | 40 | lpc17xx_libcfg.h: Library configuration file - include needed driver library for this example |
frank26080115 | 0:bf7b9fba3924 | 41 | makefile: Example's makefile (to build with GNU toolchain) |
frank26080115 | 0:bf7b9fba3924 | 42 | wdt_interrupt_test.c: Main program |
frank26080115 | 0:bf7b9fba3924 | 43 | |
frank26080115 | 0:bf7b9fba3924 | 44 | @How to run: |
frank26080115 | 0:bf7b9fba3924 | 45 | Hardware configuration: |
frank26080115 | 0:bf7b9fba3924 | 46 | This example was tested on: |
frank26080115 | 0:bf7b9fba3924 | 47 | Keil MCB1700 with LPC1768 vers.1 |
frank26080115 | 0:bf7b9fba3924 | 48 | These jumpers must be configured as following: |
frank26080115 | 0:bf7b9fba3924 | 49 | - VDDIO: ON |
frank26080115 | 0:bf7b9fba3924 | 50 | - VDDREGS: ON |
frank26080115 | 0:bf7b9fba3924 | 51 | - VBUS: ON |
frank26080115 | 0:bf7b9fba3924 | 52 | - LED: ON |
frank26080115 | 0:bf7b9fba3924 | 53 | - Remain jumpers: OFF |
frank26080115 | 0:bf7b9fba3924 | 54 | IAR LPC1768 KickStart vers.A |
frank26080115 | 0:bf7b9fba3924 | 55 | These jumpers must be configured as following: |
frank26080115 | 0:bf7b9fba3924 | 56 | - PWR_SEL: depend on power source |
frank26080115 | 0:bf7b9fba3924 | 57 | - DBG_EN : ON |
frank26080115 | 0:bf7b9fba3924 | 58 | - Remain jumpers: OFF |
frank26080115 | 0:bf7b9fba3924 | 59 | |
frank26080115 | 0:bf7b9fba3924 | 60 | Serial display configuration: (e.g: TeraTerm, Hyperterminal, Flash Magic...) |
frank26080115 | 0:bf7b9fba3924 | 61 | 115200bps |
frank26080115 | 0:bf7b9fba3924 | 62 | 8 data bit |
frank26080115 | 0:bf7b9fba3924 | 63 | No parity |
frank26080115 | 0:bf7b9fba3924 | 64 | 1 stop bit |
frank26080115 | 0:bf7b9fba3924 | 65 | No flow control |
frank26080115 | 0:bf7b9fba3924 | 66 | |
frank26080115 | 0:bf7b9fba3924 | 67 | Running mode: |
frank26080115 | 0:bf7b9fba3924 | 68 | RAM mode: This example can be run on RAM mode with debugger. |
frank26080115 | 0:bf7b9fba3924 | 69 | All files must be build to .elf file, this file will be loaded into RAM through a |
frank26080115 | 0:bf7b9fba3924 | 70 | debugger tool before running |
frank26080115 | 0:bf7b9fba3924 | 71 | ROM(FLASH)mode: This example can be run on ROM mode with debugger or standalone after burning. |
frank26080115 | 0:bf7b9fba3924 | 72 | All files in each example must be built to .hex file. This file will be burned into |
frank26080115 | 0:bf7b9fba3924 | 73 | ROM(Flash) memory through an external tool (i.e: Flash Magic...) befor running. |
frank26080115 | 0:bf7b9fba3924 | 74 | |
frank26080115 | 0:bf7b9fba3924 | 75 | Note: If want to burn hex file to board by using Flash Magic, these jumpers need |
frank26080115 | 0:bf7b9fba3924 | 76 | to be connected: |
frank26080115 | 0:bf7b9fba3924 | 77 | - MCB1700 with LPC1768 ver.1: |
frank26080115 | 0:bf7b9fba3924 | 78 | + RST: ON |
frank26080115 | 0:bf7b9fba3924 | 79 | + ISP: ON |
frank26080115 | 0:bf7b9fba3924 | 80 | - IAR LPC1768 KickStart vers.A: |
frank26080115 | 0:bf7b9fba3924 | 81 | + RST_E: ON |
frank26080115 | 0:bf7b9fba3924 | 82 | + ISP_E: ON |
frank26080115 | 0:bf7b9fba3924 | 83 | |
frank26080115 | 0:bf7b9fba3924 | 84 | (Please reference "LPC1000 Software Development Toolchain" - chapter 4 "Creating and working with |
frank26080115 | 0:bf7b9fba3924 | 85 | LPC1000CMSIS project" for more information) |
frank26080115 | 0:bf7b9fba3924 | 86 | |
frank26080115 | 0:bf7b9fba3924 | 87 | Step to run: |
frank26080115 | 0:bf7b9fba3924 | 88 | - Step 1: Choose correct working board by uncomment correct defined board in main.c file |
frank26080115 | 0:bf7b9fba3924 | 89 | + If using MCB1700 board, uncomment "#define MCB_LPC_1768" |
frank26080115 | 0:bf7b9fba3924 | 90 | + If using IAR-LPC1768-KS board, uncomment "#define MCB_LPC_1768" |
frank26080115 | 0:bf7b9fba3924 | 91 | (Should not uncomment both symbols at the same time) |
frank26080115 | 0:bf7b9fba3924 | 92 | - Step 2: Build example. |
frank26080115 | 0:bf7b9fba3924 | 93 | - Step 3: Burn hex file into board (if run on ROM mode) |
frank26080115 | 0:bf7b9fba3924 | 94 | - Step 4: Connect UART0 on this board to COM port on your computer |
frank26080115 | 0:bf7b9fba3924 | 95 | - Step 5: Configure hardware and serial display as above instruction |
frank26080115 | 0:bf7b9fba3924 | 96 | - Step 6: Run example and observe data on serial display |
frank26080115 | 0:bf7b9fba3924 | 97 | + Press '1' to start WDT operation |
frank26080115 | 0:bf7b9fba3924 | 98 | + See the current value of WDT displayed on screen |
frank26080115 | 0:bf7b9fba3924 | 99 | + After WDT interrupt, the notice sentence will be display and LED begin blink. |
frank26080115 | 0:bf7b9fba3924 | 100 | Note that: If using MCB1700 board, LED2.2 is available |
frank26080115 | 0:bf7b9fba3924 | 101 | If using IAR1768 board, LED1 is available |
frank26080115 | 0:bf7b9fba3924 | 102 | |
frank26080115 | 0:bf7b9fba3924 | 103 | (Pls see "LPC17xx Example Description" document - chapter "Examples > WDT > INTERRUPT" |
frank26080115 | 0:bf7b9fba3924 | 104 | for more details) |
frank26080115 | 0:bf7b9fba3924 | 105 | |
frank26080115 | 0:bf7b9fba3924 | 106 | @Tip: |
frank26080115 | 0:bf7b9fba3924 | 107 | - Open \EWARM\*.eww project file to run example on IAR |
frank26080115 | 0:bf7b9fba3924 | 108 | - Open \RVMDK\*.uvproj project file to run example on Keil |