These are the examples provided for [[/users/frank26080115/libraries/LPC1700CMSIS_Lib/]] Note, the entire "program" is not compilable!
DAC/Speaker/dac_speaker.c
- Committer:
- frank26080115
- Date:
- 2011-03-20
- Revision:
- 0:bf7b9fba3924
File content as of revision 0:bf7b9fba3924:
/***********************************************************************//** * @file dac_speaker.c * @purpose This example used to test DAC peripheral through speaker * @version 2.0 * @date 21. May. 2010 * @author NXP MCU SW Application Team *--------------------------------------------------------------------- * Software that is described herein is for illustrative purposes only * which provides customers with programming information regarding the * products. This software is supplied "AS IS" without any warranties. * NXP Semiconductors assumes no responsibility or liability for the * use of the software, conveys no license or title under any patent, * copyright, or mask work right to the product. NXP Semiconductors * reserves the right to make changes in the software without * notification. NXP Semiconductors also make no representation or * warranty that such application will be suitable for the specified * use without further testing or modification. **********************************************************************/ #include "lpc17xx_dac.h" #include "lpc17xx_libcfg.h" #include "lpc17xx_pinsel.h" #include "debug_frmwrk.h" /* Example group ----------------------------------------------------------- */ /** @defgroup DAC_Speaker Speaker * @ingroup DAC_Examples * @{ */ /*-------------------------MAIN FUNCTION------------------------------*/ /*********************************************************************//** * @brief c_entry: Main DAC program body * @param[in] None * @return int **********************************************************************/ int c_entry(void) { PINSEL_CFG_Type PinCfg; uint32_t time; float rate =0; /* * Init DAC pin connect * AOUT on P0.26 */ PinCfg.Funcnum = 2; PinCfg.OpenDrain = 0; PinCfg.Pinmode = 0; PinCfg.Pinnum = 26; PinCfg.Portnum = 0; PINSEL_ConfigPin(&PinCfg); /* init DAC structure to default * Maximum current is 700 uA * First value to AOUT is 0 */ DAC_Init(LPC_DAC); // main loop while (1) { for(time = 1; time < 0x3FF; time++) { DAC_UpdateValue ( LPC_DAC,(uint32_t)(time*rate)); } rate += 0.001; if(rate >= 1) { rate = 0; } } return 1; } /* With ARM and GHS toolsets, the entry point is main() - this will allow the linker to generate wrapper code to setup stacks, allocate heap area, and initialize and copy code and data segments. For GNU toolsets, the entry point is through __start() in the crt0_gnu.asm file, and that startup code will setup stacks and data */ int main(void) { return c_entry(); } #ifdef DEBUG /******************************************************************************* * @brief Reports the name of the source file and the source line number * where the CHECK_PARAM error has occurred. * @param[in] file Pointer to the source file name * @param[in] line assert_param error line source number * @return None *******************************************************************************/ void check_failed(uint8_t *file, uint32_t line) { /* User can add his own implementation to report the file name and line number, ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ /* Infinite loop */ while(1); } #endif /* * @} */