Frank 26080115
These are the examples provided for [[/users/frank26080115/libraries/LPC1700CMSIS_Lib/]] Note, the entire "program" is not compilable!
GPIO/GPIO_Interrupt/abstract.h@0:bf7b9fba3924, 2011-03-20 (annotated)
- Committer:
- frank26080115
- Date:
- Sun Mar 20 05:38:56 2011 +0000
- Revision:
- 0:bf7b9fba3924
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| frank26080115 | 0:bf7b9fba3924 | 1 | ******************** (C) COPYRIGHT 2010 NXPSemiconductors ******************* |
| frank26080115 | 0:bf7b9fba3924 | 2 | * @file GPIO\GPIO_Interrupt\abstract.txt |
| frank26080115 | 0:bf7b9fba3924 | 3 | * @author NXP MCU SW Application Team |
| frank26080115 | 0:bf7b9fba3924 | 4 | * @version 2.0 |
| frank26080115 | 0:bf7b9fba3924 | 5 | * @date |
| frank26080115 | 0:bf7b9fba3924 | 6 | * @brief Description of the GPIO Interrupt example. |
| frank26080115 | 0:bf7b9fba3924 | 7 | ****************************************************************************** |
| frank26080115 | 0:bf7b9fba3924 | 8 | * Software that is described herein is for illustrative purposes only |
| frank26080115 | 0:bf7b9fba3924 | 9 | * which provides customers with programming information regarding the |
| frank26080115 | 0:bf7b9fba3924 | 10 | * products. This software is supplied "AS IS" without any warranties. |
| frank26080115 | 0:bf7b9fba3924 | 11 | * NXP Semiconductors assumes no responsibility or liability for the |
| frank26080115 | 0:bf7b9fba3924 | 12 | * use of the software, conveys no license or title under any patent, |
| frank26080115 | 0:bf7b9fba3924 | 13 | * copyright, or mask work right to the product. NXP Semiconductors |
| frank26080115 | 0:bf7b9fba3924 | 14 | * reserves the right to make changes in the software without |
| frank26080115 | 0:bf7b9fba3924 | 15 | * notification. NXP Semiconductors also make no representation or |
| frank26080115 | 0:bf7b9fba3924 | 16 | * warranty that such application will be suitable for the specified |
| frank26080115 | 0:bf7b9fba3924 | 17 | * use without further testing or modification. |
| frank26080115 | 0:bf7b9fba3924 | 18 | ****************************************************************************** |
| frank26080115 | 0:bf7b9fba3924 | 19 | |
| frank26080115 | 0:bf7b9fba3924 | 20 | @Example description: |
| frank26080115 | 0:bf7b9fba3924 | 21 | Purpose: |
| frank26080115 | 0:bf7b9fba3924 | 22 | This example describes how to use GPIO interrupt function. |
| frank26080115 | 0:bf7b9fba3924 | 23 | Process: |
| frank26080115 | 0:bf7b9fba3924 | 24 | Different board have different layout, so we need to have different configuration |
| frank26080115 | 0:bf7b9fba3924 | 25 | - If using MCB1700 board: Interrupt is configured to use P0.25 pin (ACD potentiometter) |
| frank26080115 | 0:bf7b9fba3924 | 26 | - If using IAR-LPC1768-KS board: External interrupt is configured to use P0.23 pin (BUT1 button) |
| frank26080115 | 0:bf7b9fba3924 | 27 | |
| frank26080115 | 0:bf7b9fba3924 | 28 | Turn the ADC potentiometer according to clock direction until interrupt happen (If using MCB1700 board). |
| frank26080115 | 0:bf7b9fba3924 | 29 | Hit the BUT1 button (If using IAR-LPC1768-KS board)to make interrupt happen. |
| frank26080115 | 0:bf7b9fba3924 | 30 | |
| frank26080115 | 0:bf7b9fba3924 | 31 | @Directory contents: |
| frank26080115 | 0:bf7b9fba3924 | 32 | \EWARM: includes EWARM (IAR) project and configuration files |
| frank26080115 | 0:bf7b9fba3924 | 33 | \Keil: includes RVMDK (Keil)project and configuration files |
| frank26080115 | 0:bf7b9fba3924 | 34 | |
| frank26080115 | 0:bf7b9fba3924 | 35 | lpc17xx_libcfg.h: Library configuration file - include needed driver library for this example |
| frank26080115 | 0:bf7b9fba3924 | 36 | makefile: Example's makefile |
| frank26080115 | 0:bf7b9fba3924 | 37 | gpio_int.c: Main program |
| frank26080115 | 0:bf7b9fba3924 | 38 | |
| frank26080115 | 0:bf7b9fba3924 | 39 | @How to run: |
| frank26080115 | 0:bf7b9fba3924 | 40 | Hardware configuration: |
| frank26080115 | 0:bf7b9fba3924 | 41 | This example was tested on: |
| frank26080115 | 0:bf7b9fba3924 | 42 | Keil MCB1700 with LPC1768 vers.1 |
| frank26080115 | 0:bf7b9fba3924 | 43 | These jumpers must be configured as following: |
| frank26080115 | 0:bf7b9fba3924 | 44 | - VDDREGS: ON |
| frank26080115 | 0:bf7b9fba3924 | 45 | - VBUS: ON |
| frank26080115 | 0:bf7b9fba3924 | 46 | - LED: ON |
| frank26080115 | 0:bf7b9fba3924 | 47 | - INT0: ON |
| frank26080115 | 0:bf7b9fba3924 | 48 | - Remain jumpers: OFF |
| frank26080115 | 0:bf7b9fba3924 | 49 | IAR LPC1768 KickStart vers.A |
| frank26080115 | 0:bf7b9fba3924 | 50 | These jumpers must be configured as following: |
| frank26080115 | 0:bf7b9fba3924 | 51 | - PWR_SEL: depend on power source |
| frank26080115 | 0:bf7b9fba3924 | 52 | - DBG_EN : ON |
| frank26080115 | 0:bf7b9fba3924 | 53 | - ACC_IRQ/LED2: 2-3 (LED2) |
| frank26080115 | 0:bf7b9fba3924 | 54 | - Remain jumpers: OFF |
| frank26080115 | 0:bf7b9fba3924 | 55 | |
| frank26080115 | 0:bf7b9fba3924 | 56 | |
| frank26080115 | 0:bf7b9fba3924 | 57 | Running mode: |
| frank26080115 | 0:bf7b9fba3924 | 58 | This example can run on RAM/ROM mode. |
| frank26080115 | 0:bf7b9fba3924 | 59 | |
| frank26080115 | 0:bf7b9fba3924 | 60 | Note: If want to burn hex file to board by using Flash Magic, these jumpers need |
| frank26080115 | 0:bf7b9fba3924 | 61 | to be connected: |
| frank26080115 | 0:bf7b9fba3924 | 62 | - MCB1700 with LPC1768 ver.1: |
| frank26080115 | 0:bf7b9fba3924 | 63 | + RST: ON |
| frank26080115 | 0:bf7b9fba3924 | 64 | + ISP: ON |
| frank26080115 | 0:bf7b9fba3924 | 65 | - IAR LPC1768 KickStart vers.A: |
| frank26080115 | 0:bf7b9fba3924 | 66 | + RST_E: ON |
| frank26080115 | 0:bf7b9fba3924 | 67 | + ISP_E: ON |
| frank26080115 | 0:bf7b9fba3924 | 68 | |
| frank26080115 | 0:bf7b9fba3924 | 69 | (Please reference "LPC1000 Software Development Toolchain" - chapter 4 "Creating and working with |
| frank26080115 | 0:bf7b9fba3924 | 70 | LPC1000CMSIS project" for more information) |
| frank26080115 | 0:bf7b9fba3924 | 71 | |
| frank26080115 | 0:bf7b9fba3924 | 72 | Step to run: |
| frank26080115 | 0:bf7b9fba3924 | 73 | - Step 1: Choose correct working board: In gpio_int.c file |
| frank26080115 | 0:bf7b9fba3924 | 74 | + If using MCB1700 board, setting: |
| frank26080115 | 0:bf7b9fba3924 | 75 | #define MCB_LPC_1768 |
| frank26080115 | 0:bf7b9fba3924 | 76 | //#define IAR_LPC_1768 |
| frank26080115 | 0:bf7b9fba3924 | 77 | + If using IAR-LPC1768-KS board, setting: |
| frank26080115 | 0:bf7b9fba3924 | 78 | //#define MCB_LPC_1768 |
| frank26080115 | 0:bf7b9fba3924 | 79 | #define IAR_LPC_1768 |
| frank26080115 | 0:bf7b9fba3924 | 80 | (Should not enable/disable both symbols at the same time) |
| frank26080115 | 0:bf7b9fba3924 | 81 | - Step 2: Build example. |
| frank26080115 | 0:bf7b9fba3924 | 82 | - Step 3: Burn hex file into board (if run in ROM mode) |
| frank26080115 | 0:bf7b9fba3924 | 83 | - Step 4: Reset the board |
| frank26080115 | 0:bf7b9fba3924 | 84 | - Step 5: if using MCB1700: Turn ACD potentiometter until interrupt occurs, then we see LED P1.29 blinking 8 times. |
| frank26080115 | 0:bf7b9fba3924 | 85 | if using IAR-LPC1768-KS board: Press BUT1 button then LED2 will be blinking 8 times |
| frank26080115 | 0:bf7b9fba3924 | 86 | |
| frank26080115 | 0:bf7b9fba3924 | 87 | (Pls see "LPC17xx Example Description" document - chapter "Examples > GPIO > GPIO_Interrupt" |
| frank26080115 | 0:bf7b9fba3924 | 88 | for more details) |
| frank26080115 | 0:bf7b9fba3924 | 89 | |
| frank26080115 | 0:bf7b9fba3924 | 90 | @Tip: |
| frank26080115 | 0:bf7b9fba3924 | 91 | - Open \EWARM\*.eww project file to run example on IAR |
| frank26080115 | 0:bf7b9fba3924 | 92 | - Open \RVMDK\*.uvproj project file to run example on Keil |