M J / mbed-src

logi loader fork from jpiat

Fork of mbed-src by Jonathan Piat

targets/hal/TARGET_STM/TARGET_NZ32ST1L/pinmap.c@565:5ad6216dec17, 2015-06-09 (annotated)

Committer:
fragment
Date:
Tue Jun 09 21:25:28 2015 +0000
Revision:
565:5ad6216dec17
Parent:
545:5112d5ae6723 
updated header - disable rtc, correct osc freq.  Turn on led at startup

Who changed what in which revision?

UserRevisionLine numberNew contents of line
mbed_official 545:5112d5ae6723 1 /* mbed Microcontroller Library
mbed_official 545:5112d5ae6723 2 *******************************************************************************
mbed_official 545:5112d5ae6723 3 * Copyright (c) 2015, STMicroelectronics
mbed_official 545:5112d5ae6723 4 * All rights reserved.
mbed_official 545:5112d5ae6723 5 *
mbed_official 545:5112d5ae6723 6 * Redistribution and use in source and binary forms, with or without
mbed_official 545:5112d5ae6723 7 * modification, are permitted provided that the following conditions are met:
mbed_official 545:5112d5ae6723 8 *
mbed_official 545:5112d5ae6723 9 * 1. Redistributions of source code must retain the above copyright notice,
mbed_official 545:5112d5ae6723 10 * this list of conditions and the following disclaimer.
mbed_official 545:5112d5ae6723 11 * 2. Redistributions in binary form must reproduce the above copyright notice,
mbed_official 545:5112d5ae6723 12 * this list of conditions and the following disclaimer in the documentation
mbed_official 545:5112d5ae6723 13 * and/or other materials provided with the distribution.
mbed_official 545:5112d5ae6723 14 * 3. Neither the name of STMicroelectronics nor the names of its contributors
mbed_official 545:5112d5ae6723 15 * may be used to endorse or promote products derived from this software
mbed_official 545:5112d5ae6723 16 * without specific prior written permission.
mbed_official 545:5112d5ae6723 17 *
mbed_official 545:5112d5ae6723 18 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
mbed_official 545:5112d5ae6723 19 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
mbed_official 545:5112d5ae6723 20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
mbed_official 545:5112d5ae6723 21 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
mbed_official 545:5112d5ae6723 22 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
mbed_official 545:5112d5ae6723 23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
mbed_official 545:5112d5ae6723 24 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
mbed_official 545:5112d5ae6723 25 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
mbed_official 545:5112d5ae6723 26 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
mbed_official 545:5112d5ae6723 27 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
mbed_official 545:5112d5ae6723 28 *******************************************************************************
mbed_official 545:5112d5ae6723 29 */
mbed_official 545:5112d5ae6723 30 #include "mbed_assert.h"
mbed_official 545:5112d5ae6723 31 #include "pinmap.h"
mbed_official 545:5112d5ae6723 32 #include "PortNames.h"
mbed_official 545:5112d5ae6723 33 #include "mbed_error.h"
mbed_official 545:5112d5ae6723 34
mbed_official 545:5112d5ae6723 35 // GPIO mode look-up table
mbed_official 545:5112d5ae6723 36 static const uint32_t gpio_mode[13] = {
mbed_official 545:5112d5ae6723 37 0x00000000, // 0 = GPIO_MODE_INPUT
mbed_official 545:5112d5ae6723 38 0x00000001, // 1 = GPIO_MODE_OUTPUT_PP
mbed_official 545:5112d5ae6723 39 0x00000011, // 2 = GPIO_MODE_OUTPUT_OD
mbed_official 545:5112d5ae6723 40 0x00000002, // 3 = GPIO_MODE_AF_PP
mbed_official 545:5112d5ae6723 41 0x00000012, // 4 = GPIO_MODE_AF_OD
mbed_official 545:5112d5ae6723 42 0x00000003, // 5 = GPIO_MODE_ANALOG
mbed_official 545:5112d5ae6723 43 0x10110000, // 6 = GPIO_MODE_IT_RISING
mbed_official 545:5112d5ae6723 44 0x10210000, // 7 = GPIO_MODE_IT_FALLING
mbed_official 545:5112d5ae6723 45 0x10310000, // 8 = GPIO_MODE_IT_RISING_FALLING
mbed_official 545:5112d5ae6723 46 0x10120000, // 9 = GPIO_MODE_EVT_RISING
mbed_official 545:5112d5ae6723 47 0x10220000, // 10 = GPIO_MODE_EVT_FALLING
mbed_official 545:5112d5ae6723 48 0x10320000, // 11 = GPIO_MODE_EVT_RISING_FALLING
mbed_official 545:5112d5ae6723 49 0x10000000 // 12 = Reset IT and EVT (not in STM32Cube HAL)
mbed_official 545:5112d5ae6723 50 };
mbed_official 545:5112d5ae6723 51
mbed_official 545:5112d5ae6723 52 // Enable GPIO clock and return GPIO base address
mbed_official 545:5112d5ae6723 53 uint32_t Set_GPIO_Clock(uint32_t port_idx)
mbed_official 545:5112d5ae6723 54 {
mbed_official 545:5112d5ae6723 55 uint32_t gpio_add = 0;
mbed_official 545:5112d5ae6723 56 switch (port_idx) {
mbed_official 545:5112d5ae6723 57 case PortA:
mbed_official 545:5112d5ae6723 58 gpio_add = GPIOA_BASE;
mbed_official 545:5112d5ae6723 59 __GPIOA_CLK_ENABLE();
mbed_official 545:5112d5ae6723 60 break;
mbed_official 545:5112d5ae6723 61 case PortB:
mbed_official 545:5112d5ae6723 62 gpio_add = GPIOB_BASE;
mbed_official 545:5112d5ae6723 63 __GPIOB_CLK_ENABLE();
mbed_official 545:5112d5ae6723 64 break;
mbed_official 545:5112d5ae6723 65 case PortC:
mbed_official 545:5112d5ae6723 66 gpio_add = GPIOC_BASE;
mbed_official 545:5112d5ae6723 67 __GPIOC_CLK_ENABLE();
mbed_official 545:5112d5ae6723 68 break;
mbed_official 545:5112d5ae6723 69 case PortD:
mbed_official 545:5112d5ae6723 70 gpio_add = GPIOD_BASE;
mbed_official 545:5112d5ae6723 71 __GPIOD_CLK_ENABLE();
mbed_official 545:5112d5ae6723 72 break;
mbed_official 545:5112d5ae6723 73 case PortH:
mbed_official 545:5112d5ae6723 74 gpio_add = GPIOH_BASE;
mbed_official 545:5112d5ae6723 75 __GPIOH_CLK_ENABLE();
mbed_official 545:5112d5ae6723 76 break;
mbed_official 545:5112d5ae6723 77 default:
mbed_official 545:5112d5ae6723 78 error("Pinmap error: wrong port number.");
mbed_official 545:5112d5ae6723 79 break;
mbed_official 545:5112d5ae6723 80 }
mbed_official 545:5112d5ae6723 81 return gpio_add;
mbed_official 545:5112d5ae6723 82 }
mbed_official 545:5112d5ae6723 83
mbed_official 545:5112d5ae6723 84 /**
mbed_official 545:5112d5ae6723 85 * Configure pin (mode, speed, output type and pull-up/pull-down)
mbed_official 545:5112d5ae6723 86 */
mbed_official 545:5112d5ae6723 87 void pin_function(PinName pin, int data)
mbed_official 545:5112d5ae6723 88 {
mbed_official 545:5112d5ae6723 89 MBED_ASSERT(pin != (PinName)NC);
mbed_official 545:5112d5ae6723 90 // Get the pin informations
mbed_official 545:5112d5ae6723 91 uint32_t mode = STM_PIN_MODE(data);
mbed_official 545:5112d5ae6723 92 uint32_t pupd = STM_PIN_PUPD(data);
mbed_official 545:5112d5ae6723 93 uint32_t afnum = STM_PIN_AFNUM(data);
mbed_official 545:5112d5ae6723 94
mbed_official 545:5112d5ae6723 95 uint32_t port_index = STM_PORT(pin);
mbed_official 545:5112d5ae6723 96 uint32_t pin_index = STM_PIN(pin);
mbed_official 545:5112d5ae6723 97
mbed_official 545:5112d5ae6723 98 // Enable GPIO clock
mbed_official 545:5112d5ae6723 99 uint32_t gpio_add = Set_GPIO_Clock(port_index);
mbed_official 545:5112d5ae6723 100 GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
mbed_official 545:5112d5ae6723 101
mbed_official 545:5112d5ae6723 102 // Configure GPIO
mbed_official 545:5112d5ae6723 103 GPIO_InitTypeDef GPIO_InitStructure;
mbed_official 545:5112d5ae6723 104 GPIO_InitStructure.Pin = (uint32_t)(1 << pin_index);
mbed_official 545:5112d5ae6723 105 GPIO_InitStructure.Mode = gpio_mode[mode];
mbed_official 545:5112d5ae6723 106 GPIO_InitStructure.Pull = pupd;
mbed_official 545:5112d5ae6723 107 GPIO_InitStructure.Speed = GPIO_SPEED_HIGH;
mbed_official 545:5112d5ae6723 108 GPIO_InitStructure.Alternate = afnum;
mbed_official 545:5112d5ae6723 109 HAL_GPIO_Init(gpio, &GPIO_InitStructure);
mbed_official 545:5112d5ae6723 110
mbed_official 545:5112d5ae6723 111 // [TODO] Disconnect JTAG-DP + SW-DP signals.
mbed_official 545:5112d5ae6723 112 // Warning: Need to reconnect under reset
mbed_official 545:5112d5ae6723 113 //if ((pin == PA_13) || (pin == PA_14)) {
mbed_official 545:5112d5ae6723 114 //
mbed_official 545:5112d5ae6723 115 //}
mbed_official 545:5112d5ae6723 116 //if ((pin == PA_15) || (pin == PB_3) || (pin == PB_4)) {
mbed_official 545:5112d5ae6723 117 //
mbed_official 545:5112d5ae6723 118 //}
mbed_official 545:5112d5ae6723 119 }
mbed_official 545:5112d5ae6723 120
mbed_official 545:5112d5ae6723 121 /**
mbed_official 545:5112d5ae6723 122 * Configure pin pull-up/pull-down
mbed_official 545:5112d5ae6723 123 */
mbed_official 545:5112d5ae6723 124 void pin_mode(PinName pin, PinMode mode)
mbed_official 545:5112d5ae6723 125 {
mbed_official 545:5112d5ae6723 126 MBED_ASSERT(pin != (PinName)NC);
mbed_official 545:5112d5ae6723 127 uint32_t port_index = STM_PORT(pin);
mbed_official 545:5112d5ae6723 128 uint32_t pin_index = STM_PIN(pin);
mbed_official 545:5112d5ae6723 129
mbed_official 545:5112d5ae6723 130 // Enable GPIO clock
mbed_official 545:5112d5ae6723 131 uint32_t gpio_add = Set_GPIO_Clock(port_index);
mbed_official 545:5112d5ae6723 132 GPIO_TypeDef *gpio = (GPIO_TypeDef *)gpio_add;
mbed_official 545:5112d5ae6723 133
mbed_official 545:5112d5ae6723 134 // Configure pull-up/pull-down resistors
mbed_official 545:5112d5ae6723 135 uint32_t pupd = (uint32_t)mode;
mbed_official 545:5112d5ae6723 136 if (pupd > 2)
mbed_official 545:5112d5ae6723 137 {
mbed_official 545:5112d5ae6723 138 pupd = 0; // Open-drain = No pull-up/No pull-down
mbed_official 545:5112d5ae6723 139 }
mbed_official 545:5112d5ae6723 140 gpio->PUPDR &= (uint32_t)(~(GPIO_PUPDR_PUPDR0 << (pin_index * 2)));
mbed_official 545:5112d5ae6723 141 gpio->PUPDR |= (uint32_t)(pupd << (pin_index * 2));
mbed_official 545:5112d5ae6723 142
mbed_official 545:5112d5ae6723 143 }