Eric Fossum / Mbed 2 deprecated SprinklerTimer

I needed a device to time my sprinklers, because I had been forgetting to turn them off. So I made a very simple program to turn them off after 45 minutes. Future versions will have an array of outputs, so you can run sections with one button push. Hardware: Either board should work, I used the LPC1768. You will also need a solenoid to control the water, I am testing a 12V rainbird valve with a relay and 12V power supply.

Dependencies:   PinDetect mbed

Sprinkler Timer

I needed a device to time my sprinklers, because I had been forgetting to turn them off. So I made a very simple program to turn them off after some number of minutes.

Hardware

• Tested on the LPC1768
  • Either board should work
• You will also need some way of controlling the flow of water (like a solenoid valve and a relay). My test equipment:
  • 12V Rainbird valve (Rain Bird 3/4-Inch Sprinkler System Automatic In-Line Valve)
  • relay (SainSmart 2 channel relay)
  • 12V power supply (Replacement LCD Monitor Ac Adapter 12v 5a)
• Some Button for start/stop
• Some way of powering the board (maybe someone can help me power it from the 12v supply)

Connections

Button:

• One side to pin 5
• the other to Vout

Relay:

• Vcc to Vout
• Gnd to ground
• IN1 to pin 6

Directions/Use

• The button will start the sprinkler when it is off and vice versa.
• Once started if not interrupted, the sprinkler shall run for 25 minutes.

Future

Future versions will have an array of outputs, so you can run sections with one button push.