Federico Ferrari / Mbed 2 deprecated BMS_OX_FMF

A public repository for BMS algorithms for a NUCLEO BOARD.

Dependencies:   mbed

Hi Everyone!

Welcome to this repository from Howey's Research Group at the University of Oxford.

The code published here incorporates BMS algorithms for diagnosis functions such as SOC, SOH and Power estimation on a Kokam 53Ah Li-ion battery. This code was designed to work with a NUCLEO F401-RE board and to be tested with a dSPACE HIL Simulator. A short guide on how the set up works is available at https://bitbucket.org/ff95/bms .

The code is made up of three key parts. "Headers" and "Source" folders and the "main.cpp" file. As the code was generated by converting a Simulink model ( available on the BitBucket page), the headers and source code files generated by the conversion are in the corresponding "Headers" and "Source" folders. The "main.cpp" file sets up the ADC, the USB data transmission and starts the estimation (once a character "y" has been received by the computer it is connected to). It also transmits the data from the estimation via USB. Explanation on how to set up the communication with the board is available at BitBucket webpage, from where a MATLAB file can be downloaded which allows real time communication.

For any questions you can contact the author at federicomariaferrari@gmail.com .

The Simulink and Matlab files, together with a short guide, are all available at: https://bitbucket.org/ff95/bms.

Thanks for trying this out!

Federico

source/Simulink/rtGetNaN.cpp

Committer:
fmferrari
Date:
2017-07-13
Revision:
23:447ef1071e49
Parent:
11:e39c490420d2

File content as of revision 23:447ef1071e49:

//
// Academic License - for use in teaching, academic research, and meeting
// course requirements at degree granting institutions only.  Not for
// government, commercial, or other organizational use.
//
// File: rtGetNaN.cpp
//
// Code generated for Simulink model 'EKF'.
//
// Model version                  : 1.38
// Simulink Coder version         : 8.11 (R2016b) 25-Aug-2016
// C/C++ source code generated on : Sun Dec 11 19:45:43 2016
//
// Target selection: ert.tlc
// Embedded hardware selection: STMicroelectronics->ST10/Super10
// Code generation objectives: Unspecified
// Validation result: Not run
//

//
//  Abstract:
//       Function to initialize non-finite, NaN
#include "rtGetNaN.h"
#define NumBitsPerChar                 8U

extern "C" {
  //
  // Initialize rtNaN needed by the generated code.
  // NaN is initialized as non-signaling. Assumes IEEE.
  //
  real_T rtGetNaN(void)
  {
    size_t bitsPerReal = sizeof(real_T) * (NumBitsPerChar);
    real_T nan = 0.0;
    if (bitsPerReal == 32U) {
      nan = rtGetNaNF();
    } else {
      union {
        LittleEndianIEEEDouble bitVal;
        real_T fltVal;
      } tmpVal;

      tmpVal.bitVal.words.wordH = 0xFFF80000U;
      tmpVal.bitVal.words.wordL = 0x00000000U;
      nan = tmpVal.fltVal;
    }

    return nan;
  }

  //
  // Initialize rtNaNF needed by the generated code.
  // NaN is initialized as non-signaling. Assumes IEEE.
  //
  real32_T rtGetNaNF(void)
  {
    IEEESingle nanF = { { 0 } };

    nanF.wordL.wordLuint = 0xFFC00000U;
    return nanF.wordL.wordLreal;
  }
}
//
// File trailer for generated code.
//
// [EOF]
//