Diff: sx1276/sx1276-hal.cpp

Revision:

6:e7f02929cd3d

Parent:

5:11ec8a6ba4f0

Child:

7:2b555111463f

diff -r 11ec8a6ba4f0 -r e7f02929cd3d sx1276/sx1276-hal.cpp
--- a/sx1276/sx1276-hal.cpp	Thu Aug 21 11:58:28 2014 +0000
+++ b/sx1276/sx1276-hal.cpp	Thu Sep 04 14:03:20 2014 +0000
@@ -33,11 +33,12 @@
     { MODEM_LORA, REG_LR_PAYLOADMAXLENGTH, 0x40 },  
 };
 
-SX1276MB1xAS::SX1276MB1xAS( void ( *txDone )( ), void ( *txTimeout ) ( ), void ( *rxDone ) ( uint8_t *payload, uint16_t size, int8_t rssi, int8_t snr ), void ( *rxTimeout ) ( ), void ( *rxError ) ( ),
+SX1276MB1xAS::SX1276MB1xAS( void ( *txDone )( ), void ( *txTimeout ) ( ), void ( *rxDone ) ( uint8_t *payload, uint16_t size, int8_t rssi, int8_t snr ), 
+                            void ( *rxTimeout ) ( ), void ( *rxError ) ( ), void ( *fhssChangeChannel ) ( uint8_t channelIndex ),
                             PinName mosi, PinName miso, PinName sclk, PinName nss, PinName reset,
                             PinName dio0, PinName dio1, PinName dio2, PinName dio3, PinName dio4, PinName dio5,
                             PinName antSwitch )
-                            : SX1276( txDone, txTimeout, rxDone, rxTimeout, rxError, mosi, miso, sclk, nss, reset, dio0, dio1, dio2, dio3, dio4, dio5),
+                            : SX1276( txDone, txTimeout, rxDone, rxTimeout, rxError, fhssChangeChannel, mosi, miso, sclk, nss, reset, dio0, dio1, dio2, dio3, dio4, dio5),
                             antSwitch( antSwitch ),
                         #if( defined ( TARGET_KL25Z ) ||  defined ( TARGET_LPC11U6X ) )
                             fake( A3 )
@@ -64,13 +65,14 @@
     this->settings.State = IDLE ;
 }
 
-SX1276MB1xAS::SX1276MB1xAS( void ( *txDone )( ), void ( *txTimeout ) ( ), void ( *rxDone ) ( uint8_t *payload, uint16_t size, int8_t rssi, int8_t snr ), void ( *rxTimeout ) ( ), void ( *rxError ) ( ) ) 
+SX1276MB1xAS::SX1276MB1xAS( void ( *txDone )( ), void ( *txTimeout ) ( ), void ( *rxDone ) ( uint8_t *payload, uint16_t size, int8_t rssi, int8_t snr ), 
+                            void ( *rxTimeout ) ( ), void ( *rxError ) ( ), void ( *fhssChangeChannel ) ( uint8_t channelIndex ) ) 
                         #if( defined ( TARGET_KL25Z ) ||  defined ( TARGET_LPC11U6X ) )
-                        :   SX1276( txDone, txTimeout, rxDone, rxTimeout, rxError, D11, D12, D13, D10, A0, D2, D3, D4, D5, D8, D9 ),
+                        :   SX1276( txDone, txTimeout, rxDone, rxTimeout, rxError, fhssChangeChannel, D11, D12, D13, D10, A0, D2, D3, D4, D5, D8, D9 ),
                             antSwitch( A4 ), 
                             fake( A3 )
                         #elif defined ( TARGET_NUCLEO_L152RE )
-                        :   SX1276( txDone, txTimeout, rxDone, rxTimeout, rxError, D11, D12, D13, D10, A0, D2, D3, D4, D5, A3, D9 ), // For NUCLEO L152RE dio4 is on port A3
+                        :   SX1276( txDone, txTimeout, rxDone, rxTimeout, rxError, fhssChangeChannel, D11, D12, D13, D10, A0, D2, D3, D4, D5, A3, D9 ), // For NUCLEO L152RE dio4 is on port A3
                             antSwitch( A4 ),
                             fake( D8 )
                         #else