Filippo Casamassima
my fork
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F072RB/stm32f0xx_hal_pcd.h
- Revision:
- 92:4fc01daae5a5
- Parent:
- 85:024bf7f99721
- Child:
- 93:e188a91d3eaa
diff -r 031413cf7a89 -r 4fc01daae5a5 TARGET_NUCLEO_F072RB/stm32f0xx_hal_pcd.h
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_pcd.h Wed Oct 29 11:02:04 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_pcd.h Thu Nov 27 13:33:22 2014 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_pcd.h
* @author MCD Application Team
- * @version V1.0.0
- * @date 28-May-2014
+ * @version V1.1.0
+ * @date 03-Oct-2014
* @brief Header file of PCD HAL module.
******************************************************************************
* @attention
@@ -57,8 +57,11 @@
*/
/* Exported types ------------------------------------------------------------*/
+/** @defgroup PCD_Exported_Types PCD Exported Types
+ * @{
+ */
- /**
+/**
* @brief PCD State structures definition
*/
typedef enum
@@ -168,22 +171,26 @@
PCD_TypeDef *Instance; /*!< Register base address */
PCD_InitTypeDef Init; /*!< PCD required parameters */
__IO uint8_t USB_Address; /*!< USB Address */
- PCD_EPTypeDef IN_ep[5]; /*!< IN endpoint parameters */
- PCD_EPTypeDef OUT_ep[5]; /*!< OUT endpoint parameters */
+ PCD_EPTypeDef IN_ep[8]; /*!< IN endpoint parameters */
+ PCD_EPTypeDef OUT_ep[8]; /*!< OUT endpoint parameters */
HAL_LockTypeDef Lock; /*!< PCD peripheral status */
__IO PCD_StateTypeDef State; /*!< PCD communication state */
uint32_t Setup[12]; /*!< Setup packet buffer */
void *pData; /*!< Pointer to upper stack Handler */
} PCD_HandleTypeDef;
+
+/**
+ * @}
+ */
#include "stm32f0xx_hal_pcd_ex.h"
/* Exported constants --------------------------------------------------------*/
-/** @defgroup PCD_Exported_Constants
+/** @defgroup PCD_Exported_Constants PCD Exported Constants
* @{
*/
-/** @defgroup USB_Core_Speed
+/** @defgroup USB_Core_Speed USB Core Speed
* @{
*/
#define PCD_SPEED_HIGH 0 /* Not Supported */
@@ -192,7 +199,7 @@
* @}
*/
-/** @defgroup USB_Core_PHY
+/** @defgroup USB_Core_PHY USB Core PHY
* @{
*/
#define PCD_PHY_EMBEDDED 2
@@ -200,7 +207,7 @@
* @}
*/
-/** @defgroup USB_EP0_MPS
+/** @defgroup USB_EP0_MPS USB EP0 MPS
* @{
*/
#define DEP0CTL_MPS_64 0
@@ -216,7 +223,7 @@
* @}
*/
-/** @defgroup USB_EP_Type
+/** @defgroup USB_EP_Type USB EP Type
* @{
*/
#define PCD_EP_TYPE_CTRL 0
@@ -227,6 +234,10 @@
* @}
*/
+/** @defgroup USB_ENDP USB ENDP
+ * @{
+ */
+
#define PCD_ENDP0 ((uint8_t)0)
#define PCD_ENDP1 ((uint8_t)1)
#define PCD_ENDP2 ((uint8_t)2)
@@ -240,32 +251,46 @@
#define PCD_SNG_BUF 0
#define PCD_DBL_BUF 1
-#define IS_PCD_ALL_INSTANCE IS_USB_ALL_INSTANCE
+#define IS_PCD_ALL_INSTANCE IS_USB_ALL_INSTANCE
/**
* @}
*/
-
+
+/**
+ * @}
+ */
+
/* Exported macros -----------------------------------------------------------*/
-/** @defgroup PCD_Interrupt_Clock
+/** @defgroup PCD_Exported_Macros PCD Exported Macros
* @brief macros to handle interrupts and specific clock configurations
- * @{
- */
+ * @{
+ */
#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->ISTR) & (__INTERRUPT__)) == (__INTERRUPT__))
-#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) &= ~(__INTERRUPT__))
+#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->ISTR) = ~(__INTERRUPT__))
#define USB_EXTI_LINE_WAKEUP ((uint32_t)0x00040000) /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
-#define __HAL_USB_EXTI_ENABLE_IT() EXTI->IMR |= USB_EXTI_LINE_WAKEUP
-#define __HAL_USB_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_EXTI_LINE_WAKEUP)
-
+#define __HAL_USB_EXTI_ENABLE_IT() EXTI->IMR |= USB_EXTI_LINE_WAKEUP
+#define __HAL_USB_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_EXTI_LINE_WAKEUP)
+#define __HAL_USB_EXTI_GENERATE_SWIT(__EXTILINE__) (EXTI->SWIER |= (__EXTILINE__))
+
+/**
+ * @}
+ */
+
/* Internal macros -----------------------------------------------------------*/
+/** @defgroup PCD_Private_Macros PCD Private Macros
+ * @brief macros to handle interrupts and specific clock configurations
+ * @{
+ */
+
/* SetENDPOINT */
-#define PCD_SET_ENDPOINT(USBx, bEpNum,wRegValue) (*(&USBx->EP0R + bEpNum * 2)= (uint16_t)wRegValue)
+#define PCD_SET_ENDPOINT(USBx, bEpNum,wRegValue) (*(&(USBx)->EP0R + (bEpNum) * 2)= (uint16_t)(wRegValue))
/* GetENDPOINT */
-#define PCD_GET_ENDPOINT(USBx, bEpNum) (*(&USBx->EP0R + bEpNum * 2))
+#define PCD_GET_ENDPOINT(USBx, bEpNum) (*(&(USBx)->EP0R + (bEpNum) * 2))
@@ -276,8 +301,8 @@
* @param wType: Endpoint Type.
* @retval None
*/
-#define PCD_SET_EPTYPE(USBx, bEpNum,wType) (PCD_SET_ENDPOINT(USBx, bEpNum,\
- ((PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EP_T_MASK) | wType )))
+#define PCD_SET_EPTYPE(USBx, bEpNum,wType) (PCD_SET_ENDPOINT((USBx), (bEpNum),\
+ ((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_MASK) | (wType) )))
/**
* @brief gets the type in the endpoint register(bits EP_TYPE[1:0])
@@ -285,7 +310,7 @@
* @param bEpNum: Endpoint Number.
* @retval Endpoint Type
*/
-#define PCD_GET_EPTYPE(USBx, bEpNum) (PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EP_T_FIELD)
+#define PCD_GET_EPTYPE(USBx, bEpNum) (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_T_FIELD)
/**
@@ -298,13 +323,13 @@
*/
#define PCD_FreeUserBuffer(USBx, bEpNum, bDir)\
{\
- if (bDir == PCD_EP_DBUF_OUT)\
+ if ((bDir) == PCD_EP_DBUF_OUT)\
{ /* OUT double buffered endpoint */\
- PCD_TX_DTOG(USBx, bEpNum);\
+ PCD_TX_DTOG((USBx), (bEpNum));\
}\
- else if (bDir == PCD_EP_DBUF_IN)\
+ else if ((bDir) == PCD_EP_DBUF_IN)\
{ /* IN double buffered endpoint */\
- PCD_RX_DTOG(USBx, bEpNum);\
+ PCD_RX_DTOG((USBx), (bEpNum));\
}\
}
@@ -317,9 +342,9 @@
*/
#define PCD_GET_DB_DIR(USBx, bEpNum)\
{\
- if ((uint16_t)(*PCD_EP_RX_CNT(USBx, bEpNum) & 0xFC00) != 0)\
+ if ((uint16_t)(*PCD_EP_RX_CNT((USBx), (bEpNum)) & 0xFC00) != 0)\
return(PCD_EP_DBUF_OUT);\
- else if (((uint16_t)(*PCD_EP_TX_CNT(USBx, bEpNum)) & 0x03FF) != 0)\
+ else if (((uint16_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x03FF) != 0)\
return(PCD_EP_DBUF_IN);\
else\
return(PCD_EP_DBUF_ERR);\
@@ -335,14 +360,14 @@
#define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) {\
register uint16_t _wRegVal; \
\
- _wRegVal = PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPTX_DTOGMASK;\
+ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_DTOGMASK;\
/* toggle first bit ? */ \
- if((USB_EPTX_DTOG1 & wState)!= 0) \
+ if((USB_EPTX_DTOG1 & (wState))!= 0) \
_wRegVal ^= USB_EPTX_DTOG1; \
/* toggle second bit ? */ \
- if((USB_EPTX_DTOG2 & wState)!= 0) \
+ if((USB_EPTX_DTOG2 & (wState))!= 0) \
_wRegVal ^= USB_EPTX_DTOG2; \
- PCD_SET_ENDPOINT(USBx, bEpNum, (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX)); \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX)); \
} /* PCD_SET_EP_TX_STATUS */
/**
@@ -355,14 +380,14 @@
#define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) {\
register uint16_t _wRegVal; \
\
- _wRegVal = PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPRX_DTOGMASK;\
+ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_DTOGMASK;\
/* toggle first bit ? */ \
- if((USB_EPRX_DTOG1 & wState)!= 0) \
+ if((USB_EPRX_DTOG1 & (wState))!= 0) \
_wRegVal ^= USB_EPRX_DTOG1; \
/* toggle second bit ? */ \
- if((USB_EPRX_DTOG2 & wState)!= 0) \
+ if((USB_EPRX_DTOG2 & (wState))!= 0) \
_wRegVal ^= USB_EPRX_DTOG2; \
- PCD_SET_ENDPOINT(USBx, bEpNum, (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX)); \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX)); \
} /* PCD_SET_EP_RX_STATUS */
/**
@@ -376,20 +401,20 @@
#define PCD_SET_EP_TXRX_STATUS(USBx,bEpNum,wStaterx,wStatetx) {\
register uint32_t _wRegVal; \
\
- _wRegVal = PCD_GET_ENDPOINT(USBx, bEpNum) & (USB_EPRX_DTOGMASK |USB_EPTX_STAT) ;\
+ _wRegVal = PCD_GET_ENDPOINT((USBx), (bEpNum)) & (USB_EPRX_DTOGMASK |USB_EPTX_STAT) ;\
/* toggle first bit ? */ \
- if((USB_EPRX_DTOG1 & wStaterx)!= 0) \
+ if((USB_EPRX_DTOG1 & ((wStaterx)))!= 0) \
_wRegVal ^= USB_EPRX_DTOG1; \
/* toggle second bit ? */ \
- if((USB_EPRX_DTOG2 & wStaterx)!= 0) \
+ if((USB_EPRX_DTOG2 & (wStaterx))!= 0) \
_wRegVal ^= USB_EPRX_DTOG2; \
/* toggle first bit ? */ \
- if((USB_EPTX_DTOG1 & wStatetx)!= 0) \
+ if((USB_EPTX_DTOG1 & (wStatetx))!= 0) \
_wRegVal ^= USB_EPTX_DTOG1; \
/* toggle second bit ? */ \
- if((USB_EPTX_DTOG2 & wStatetx)!= 0) \
+ if((USB_EPTX_DTOG2 & (wStatetx))!= 0) \
_wRegVal ^= USB_EPTX_DTOG2; \
- PCD_SET_ENDPOINT(USBx, bEpNum, _wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX); \
+ PCD_SET_ENDPOINT((USBx), (bEpNum), _wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX); \
} /* PCD_SET_EP_TXRX_STATUS */
/**
@@ -399,9 +424,9 @@
* @param bEpNum: Endpoint Number.
* @retval status
*/
-#define PCD_GET_EP_TX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPTX_STAT)
+#define PCD_GET_EP_TX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPTX_STAT)
-#define PCD_GET_EP_RX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPRX_STAT)
+#define PCD_GET_EP_RX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPRX_STAT)
/**
* @brief sets directly the VALID tx/rx-status into the endpoint register
@@ -409,9 +434,9 @@
* @param bEpNum: Endpoint Number.
* @retval None
*/
-#define PCD_SET_EP_TX_VALID(USBx, bEpNum) (PCD_SET_EP_TX_STATUS(USBx, bEpNum, USB_EP_TX_VALID))
+#define PCD_SET_EP_TX_VALID(USBx, bEpNum) (PCD_SET_EP_TX_STATUS((USBx), (bEpNum), USB_EP_TX_VALID))
-#define PCD_SET_EP_RX_VALID(USBx, bEpNum) (PCD_SET_EP_RX_STATUS(USBx, bEpNum, USB_EP_RX_VALID))
+#define PCD_SET_EP_RX_VALID(USBx, bEpNum) (PCD_SET_EP_RX_STATUS((USBx), (bEpNum), USB_EP_RX_VALID))
/**
* @brief checks stall condition in an endpoint.
@@ -419,9 +444,9 @@
* @param bEpNum: Endpoint Number.
* @retval TRUE = endpoint in stall condition.
*/
-#define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS(USBx, bEpNum) \
+#define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS((USBx), (bEpNum)) \
== USB_EP_TX_STALL)
-#define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS(USBx, bEpNum) \
+#define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS((USBx), (bEpNum)) \
== USB_EP_RX_STALL)
/**
@@ -430,10 +455,10 @@
* @param bEpNum: Endpoint Number.
* @retval None
*/
-#define PCD_SET_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT(USBx, bEpNum, \
- (USB_EP_CTR_RX|USB_EP_CTR_TX|((PCD_GET_ENDPOINT(USBx, bEpNum) | USB_EP_KIND) & USB_EPREG_MASK))))
-#define PCD_CLEAR_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT(USBx, bEpNum, \
- (USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPKIND_MASK))))
+#define PCD_SET_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
+ (USB_EP_CTR_RX|USB_EP_CTR_TX|((PCD_GET_ENDPOINT((USBx), (bEpNum)) | USB_EP_KIND) & USB_EPREG_MASK))))
+#define PCD_CLEAR_EP_KIND(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
+ (USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPKIND_MASK))))
/**
* @brief Sets/clears directly STATUS_OUT bit in the endpoint register.
@@ -441,8 +466,8 @@
* @param bEpNum: Endpoint Number.
* @retval None
*/
-#define PCD_SET_OUT_STATUS(USBx, bEpNum) PCD_SET_EP_KIND(USBx, bEpNum)
-#define PCD_CLEAR_OUT_STATUS(USBx, bEpNum) PCD_CLEAR_EP_KIND(USBx, bEpNum)
+#define PCD_SET_OUT_STATUS(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum))
+#define PCD_CLEAR_OUT_STATUS(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum))
/**
* @brief Sets/clears directly EP_KIND bit in the endpoint register.
@@ -450,8 +475,8 @@
* @param bEpNum: Endpoint Number.
* @retval None
*/
-#define PCD_SET_EP_DBUF(USBx, bEpNum) PCD_SET_EP_KIND(USBx, bEpNum)
-#define PCD_CLEAR_EP_DBUF(USBx, bEpNum) PCD_CLEAR_EP_KIND(USBx, bEpNum)
+#define PCD_SET_EP_DBUF(USBx, bEpNum) PCD_SET_EP_KIND((USBx), (bEpNum))
+#define PCD_CLEAR_EP_DBUF(USBx, bEpNum) PCD_CLEAR_EP_KIND((USBx), (bEpNum))
/**
* @brief Clears bit CTR_RX / CTR_TX in the endpoint register.
@@ -459,10 +484,10 @@
* @param bEpNum: Endpoint Number.
* @retval None
*/
-#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT(USBx, bEpNum,\
- PCD_GET_ENDPOINT(USBx, bEpNum) & 0x7FFF & USB_EPREG_MASK))
-#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT(USBx, bEpNum,\
- PCD_GET_ENDPOINT(USBx, bEpNum) & 0xFF7F & USB_EPREG_MASK))
+#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum),\
+ PCD_GET_ENDPOINT((USBx), (bEpNum)) & 0x7FFF & USB_EPREG_MASK))
+#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum),\
+ PCD_GET_ENDPOINT((USBx), (bEpNum)) & 0xFF7F & USB_EPREG_MASK))
/**
* @brief Toggles DTOG_RX / DTOG_TX bit in the endpoint register.
@@ -470,10 +495,10 @@
* @param bEpNum: Endpoint Number.
* @retval None
*/
-#define PCD_RX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT(USBx, bEpNum, \
- USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_RX | (PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPREG_MASK)))
-#define PCD_TX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT(USBx, bEpNum, \
- USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_TX | (PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPREG_MASK)))
+#define PCD_RX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
+ USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_RX | (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK)))
+#define PCD_TX_DTOG(USBx, bEpNum) (PCD_SET_ENDPOINT((USBx), (bEpNum), \
+ USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_TX | (PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK)))
/**
* @brief Clears DTOG_RX / DTOG_TX bit in the endpoint register.
@@ -481,10 +506,10 @@
* @param bEpNum: Endpoint Number.
* @retval None
*/
-#define PCD_CLEAR_RX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EP_DTOG_RX) != 0)\
- PCD_RX_DTOG(USBx, bEpNum)
-#define PCD_CLEAR_TX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EP_DTOG_TX) != 0)\
- PCD_TX_DTOG(USBx, bEpNum)
+#define PCD_CLEAR_RX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_DTOG_RX) != 0)\
+ PCD_RX_DTOG((USBx), (bEpNum))
+#define PCD_CLEAR_TX_DTOG(USBx, bEpNum) if((PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EP_DTOG_TX) != 0)\
+ PCD_TX_DTOG((USBx), (bEpNum))
/**
* @brief Sets address in an endpoint register.
@@ -493,8 +518,8 @@
* @param bAddr: Address.
* @retval None
*/
-#define PCD_SET_EP_ADDRESS(USBx, bEpNum,bAddr) PCD_SET_ENDPOINT(USBx, bEpNum,\
- USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPREG_MASK) | bAddr)
+#define PCD_SET_EP_ADDRESS(USBx, bEpNum,bAddr) PCD_SET_ENDPOINT((USBx), (bEpNum),\
+ USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPREG_MASK) | (bAddr))
/**
* @brief Gets address in an endpoint register.
@@ -502,12 +527,12 @@
* @param bEpNum: Endpoint Number.
* @retval None
*/
-#define PCD_GET_EP_ADDRESS(USBx, bEpNum) ((uint8_t)(PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPADDR_FIELD))
+#define PCD_GET_EP_ADDRESS(USBx, bEpNum) ((uint8_t)(PCD_GET_ENDPOINT((USBx), (bEpNum)) & USB_EPADDR_FIELD))
-#define PCD_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t *)((USBx->BTABLE+bEpNum*8)+ ((uint32_t)USBx + 0x400)))
-#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint16_t *)((USBx->BTABLE+bEpNum*8+2)+ ((uint32_t)USBx + 0x400)))
-#define PCD_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t *)((USBx->BTABLE+bEpNum*8+4)+ ((uint32_t)USBx + 0x400)))
-#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint16_t *)((USBx->BTABLE+bEpNum*8+6)+ ((uint32_t)USBx + 0x400)))
+#define PCD_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t *)(((USBx)->BTABLE+(bEpNum)*8)+ ((uint32_t)(USBx) + 0x400)))
+#define PCD_EP_TX_CNT(USBx, bEpNum) ((uint16_t *)(((USBx)->BTABLE+(bEpNum)*8+2)+ ((uint32_t)(USBx) + 0x400)))
+#define PCD_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t *)(((USBx)->BTABLE+(bEpNum)*8+4)+ ((uint32_t)(USBx) + 0x400)))
+#define PCD_EP_RX_CNT(USBx, bEpNum) ((uint16_t *)(((USBx)->BTABLE+(bEpNum)*8+6)+ ((uint32_t)(USBx) + 0x400)))
/**
* @brief sets address of the tx/rx buffer.
@@ -516,8 +541,8 @@
* @param wAddr: address to be set (must be word aligned).
* @retval None
*/
-#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_TX_ADDRESS(USBx, bEpNum) = ((wAddr >> 1) << 1))
-#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_RX_ADDRESS(USBx, bEpNum) = ((wAddr >> 1) << 1))
+#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_TX_ADDRESS((USBx), (bEpNum)) = (((wAddr) >> 1) << 1))
+#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_RX_ADDRESS((USBx), (bEpNum)) = (((wAddr) >> 1) << 1))
/**
* @brief Gets address of the tx/rx buffer.
@@ -525,8 +550,8 @@
* @param bEpNum: Endpoint Number.
* @retval address of the buffer.
*/
-#define PCD_GET_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_TX_ADDRESS(USBx, bEpNum))
-#define PCD_GET_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_RX_ADDRESS(USBx, bEpNum))
+#define PCD_GET_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_TX_ADDRESS((USBx), (bEpNum)))
+#define PCD_GET_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_RX_ADDRESS((USBx), (bEpNum)))
/**
* @brief Sets counter of rx buffer with no. of blocks.
@@ -536,28 +561,28 @@
* @retval None
*/
#define PCD_CALC_BLK32(dwReg,wCount,wNBlocks) {\
- wNBlocks = wCount >> 5;\
- if((wCount & 0x1f) == 0)\
- wNBlocks--;\
- *pdwReg = (uint16_t)((wNBlocks << 10) | 0x8000);\
+ (wNBlocks) = (wCount) >> 5;\
+ if(((wCount) & 0x1f) == 0)\
+ (wNBlocks)--;\
+ *pdwReg = (uint16_t)(((wNBlocks) << 10) | 0x8000);\
}/* PCD_CALC_BLK32 */
#define PCD_CALC_BLK2(dwReg,wCount,wNBlocks) {\
- wNBlocks = wCount >> 1;\
- if((wCount & 0x1) != 0)\
- wNBlocks++;\
- *pdwReg = (uint16_t)(wNBlocks << 10);\
+ (wNBlocks) = (wCount) >> 1;\
+ if(((wCount) & 0x1) != 0)\
+ (wNBlocks)++;\
+ *pdwReg = (uint16_t)((wNBlocks) << 10);\
}/* PCD_CALC_BLK2 */
#define PCD_SET_EP_CNT_RX_REG(dwReg,wCount) {\
uint16_t wNBlocks;\
- if(wCount > 62){PCD_CALC_BLK32(dwReg,wCount,wNBlocks);}\
- else {PCD_CALC_BLK2(dwReg,wCount,wNBlocks);}\
+ if((wCount) > 62){PCD_CALC_BLK32((dwReg),(wCount),wNBlocks);}\
+ else {PCD_CALC_BLK2((dwReg),(wCount),wNBlocks);}\
}/* PCD_SET_EP_CNT_RX_REG */
#define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum,wCount) {\
- uint16_t *pdwReg = PCD_EP_TX_CNT(USBx, bEpNum); \
- PCD_SET_EP_CNT_RX_REG(pdwReg, wCount);\
+ uint16_t *pdwReg = PCD_EP_TX_CNT((USBx), (bEpNum)); \
+ PCD_SET_EP_CNT_RX_REG(pdwReg, (wCount));\
}
/**
* @brief sets counter for the tx/rx buffer.
@@ -566,7 +591,7 @@
* @param wCount: Counter value.
* @retval None
*/
-#define PCD_SET_EP_TX_CNT(USBx, bEpNum,wCount) (*PCD_EP_TX_CNT(USBx, bEpNum) = wCount)
+#define PCD_SET_EP_TX_CNT(USBx, bEpNum,wCount) (*PCD_EP_TX_CNT((USBx), (bEpNum)) = (wCount))
#define PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount) {\
uint16_t *pdwReg = PCD_EP_RX_CNT(USBx, bEpNum); \
PCD_SET_EP_CNT_RX_REG(pdwReg, wCount);\
@@ -578,8 +603,8 @@
* @param bEpNum: Endpoint Number.
* @retval Counter value
*/
-#define PCD_GET_EP_TX_CNT(USBx, bEpNum)((uint16_t)(*PCD_EP_TX_CNT(USBx, bEpNum)) & 0x3ff)
-#define PCD_GET_EP_RX_CNT(USBx, bEpNum)((uint16_t)(*PCD_EP_RX_CNT(USBx, bEpNum)) & 0x3ff)
+#define PCD_GET_EP_TX_CNT(USBx, bEpNum)((uint16_t)(*PCD_EP_TX_CNT((USBx), (bEpNum))) & 0x3ff)
+#define PCD_GET_EP_RX_CNT(USBx, bEpNum)((uint16_t)(*PCD_EP_RX_CNT((USBx), (bEpNum))) & 0x3ff)
/**
* @brief Sets buffer 0/1 address in a double buffer endpoint.
@@ -588,8 +613,8 @@
* @param wBuf0Addr: buffer 0 address.
* @retval Counter value
*/
-#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum,wBuf0Addr) {PCD_SET_EP_TX_ADDRESS(USBx, bEpNum, wBuf0Addr);}
-#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum,wBuf1Addr) {PCD_SET_EP_RX_ADDRESS(USBx, bEpNum, wBuf1Addr);}
+#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum,wBuf0Addr) {PCD_SET_EP_TX_ADDRESS((USBx), (bEpNum), (wBuf0Addr));}
+#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum,wBuf1Addr) {PCD_SET_EP_RX_ADDRESS((USBx), (bEpNum), (wBuf1Addr));}
/**
* @brief Sets addresses in a double buffer endpoint.
@@ -600,8 +625,8 @@
* @retval None
*/
#define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum,wBuf0Addr,wBuf1Addr) { \
- PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum, wBuf0Addr);\
- PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum, wBuf1Addr);\
+ PCD_SET_EP_DBUF0_ADDR((USBx), (bEpNum), (wBuf0Addr));\
+ PCD_SET_EP_DBUF1_ADDR((USBx), (bEpNum), (wBuf1Addr));\
} /* PCD_SET_EP_DBUF_ADDR */
/**
@@ -610,8 +635,8 @@
* @param bEpNum: Endpoint Number.
* @retval None
*/
-#define PCD_GET_EP_DBUF0_ADDR(USBx, bEpNum) (PCD_GET_EP_TX_ADDRESS(USBx, bEpNum))
-#define PCD_GET_EP_DBUF1_ADDR(USBx, bEpNum) (PCD_GET_EP_RX_ADDRESS(USBx, bEpNum))
+#define PCD_GET_EP_DBUF0_ADDR(USBx, bEpNum) (PCD_GET_EP_TX_ADDRESS((USBx), (bEpNum)))
+#define PCD_GET_EP_DBUF1_ADDR(USBx, bEpNum) (PCD_GET_EP_RX_ADDRESS((USBx), (bEpNum)))
/**
* @brief Gets buffer 0/1 address of a double buffer endpoint.
@@ -623,26 +648,26 @@
* @retval None
*/
#define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount) { \
- if(bDir == PCD_EP_DBUF_OUT)\
+ if((bDir) == PCD_EP_DBUF_OUT)\
/* OUT endpoint */ \
- {PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum,wCount);} \
- else if(bDir == PCD_EP_DBUF_IN)\
+ {PCD_SET_EP_RX_DBUF0_CNT((USBx), (bEpNum),(wCount));} \
+ else if((bDir) == PCD_EP_DBUF_IN)\
/* IN endpoint */ \
- *PCD_EP_TX_CNT(USBx, bEpNum) = (uint32_t)wCount; \
+ *PCD_EP_TX_CNT((USBx), (bEpNum)) = (uint32_t)(wCount); \
} /* SetEPDblBuf0Count*/
#define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount) { \
- if(bDir == PCD_EP_DBUF_OUT)\
+ if((bDir) == PCD_EP_DBUF_OUT)\
/* OUT endpoint */ \
- {PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount);}\
- else if(bDir == PCD_EP_DBUF_IN)\
+ {PCD_SET_EP_RX_CNT((USBx), (bEpNum),(wCount));}\
+ else if((bDir) == PCD_EP_DBUF_IN)\
/* IN endpoint */\
- *PCD_EP_RX_CNT(USBx, bEpNum) = (uint32_t)wCount; \
+ *PCD_EP_RX_CNT((USBx), (bEpNum)) = (uint32_t)(wCount); \
} /* SetEPDblBuf1Count */
#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) {\
- PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount); \
- PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount); \
+ PCD_SET_EP_DBUF0_CNT((USBx), (bEpNum), (bDir), (wCount)); \
+ PCD_SET_EP_DBUF1_CNT((USBx), (bEpNum), (bDir), (wCount)); \
} /* PCD_SET_EP_DBUF_CNT */
/**
@@ -651,8 +676,8 @@
* @param bEpNum: Endpoint Number.
* @retval None
*/
-#define PCD_GET_EP_DBUF0_CNT(USBx, bEpNum) (PCD_GET_EP_TX_CNT(USBx, bEpNum))
-#define PCD_GET_EP_DBUF1_CNT(USBx, bEpNum) (PCD_GET_EP_RX_CNT(USBx, bEpNum))
+#define PCD_GET_EP_DBUF0_CNT(USBx, bEpNum) (PCD_GET_EP_TX_CNT((USBx), (bEpNum)))
+#define PCD_GET_EP_DBUF1_CNT(USBx, bEpNum) (PCD_GET_EP_RX_CNT((USBx), (bEpNum)))
/**
@@ -661,14 +686,28 @@
/* Exported functions --------------------------------------------------------*/
-/* Initialization/de-initialization functions **********************************/
+/** @addtogroup PCD_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup PCD_Exported_Functions_Group1
+ * @{
+ */
+/* Initialization and de-initialization functions **********************************/
HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_DeInit (PCD_HandleTypeDef *hpcd);
void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
-/* I/O operation functions *****************************************************/
- /* Non-Blocking mode: Interrupt */
+/**
+ * @}
+ */
+
+/** @addtogroup PCD_Exported_Functions_Group2
+ * @{
+ */
+/* IO operation functions *****************************************************/
+ /* Non Blocking mode: Interrupt */
HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
@@ -685,6 +724,13 @@
void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/** @addtogroup PCD_Exported_Functions_Group3
+ * @{
+ */
/* Peripheral Control functions ************************************************/
HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
@@ -699,8 +745,22 @@
HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
HAL_StatusTypeDef HAL_PCD_ActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
HAL_StatusTypeDef HAL_PCD_DeActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/** @addtogroup PCD_Exported_Functions_Group4
+ * @{
+ */
/* Peripheral State functions **************************************************/
PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
/**
* @}
@@ -720,3 +780,4 @@
#endif /* __STM32F0xx_HAL_PCD_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+