Diff: TARGET_MTS_MDOT_F405RG/stm32f4xx_hal_pwr.h

Revision:

97:4298809c7c9e

Parent:

96:487b796308b0

diff -r 487b796308b0 -r 4298809c7c9e TARGET_MTS_MDOT_F405RG/stm32f4xx_hal_pwr.h
--- a/TARGET_MTS_MDOT_F405RG/stm32f4xx_hal_pwr.h	Tue Mar 17 14:27:45 2015 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,337 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f4xx_hal_pwr.h
-  * @author  MCD Application Team
-  * @version V1.1.0
-  * @date    19-June-2014
-  * @brief   Header file of PWR HAL module.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F4xx_HAL_PWR_H
-#define __STM32F4xx_HAL_PWR_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal_def.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
-  * @{
-  */
-
-/** @addtogroup PWR
-  * @{
-  */ 
-
-/* Exported types ------------------------------------------------------------*/
-/**
-  * @brief  PWR PVD configuration structure definition
-  */
-typedef struct
-{
-  uint32_t PVDLevel;   /*!< PVDLevel: Specifies the PVD detection level.
-                            This parameter can be a value of @ref PWR_PVD_detection_level */
-
-  uint32_t Mode;      /*!< Mode: Specifies the operating mode for the selected pins.
-                           This parameter can be a value of @ref PWR_PVD_Mode */
-}PWR_PVDTypeDef;
-
-/* Exported constants --------------------------------------------------------*/
-/* ------------- PWR registers bit address in the alias region ---------------*/
-#define PWR_OFFSET      (PWR_BASE - PERIPH_BASE)
-
-/* --- CR Register ---*/
-/* Alias word address of DBP bit */
-#define CR_OFFSET       (PWR_OFFSET + 0x00)
-#define DBP_BitNumber   0x08
-#define CR_DBP_BB       (PERIPH_BB_BASE + (CR_OFFSET * 32) + (DBP_BitNumber * 4))
-
-/* Alias word address of PVDE bit */
-#define PVDE_BitNumber  0x04
-#define CR_PVDE_BB      (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PVDE_BitNumber * 4))
-
-/* Alias word address of PMODE bit */
-#define PMODE_BitNumber 0x0E
-#define CR_PMODE_BB     (PERIPH_BB_BASE + (CR_OFFSET * 32) + (PMODE_BitNumber * 4))
-
-/* --- CSR Register ---*/
-/* Alias word address of EWUP bit */
-#define CSR_OFFSET      (PWR_OFFSET + 0x04)
-#define EWUP_BitNumber  0x08
-#define CSR_EWUP_BB     (PERIPH_BB_BASE + (CSR_OFFSET * 32) + (EWUP_BitNumber * 4))
-   
-/** @defgroup PWR_Exported_Constants
-  * @{
-  */
- 
-/** @defgroup PWR_WakeUp_Pins
-  * @{
-  */
-
-#define PWR_WAKEUP_PIN1                 PWR_CSR_EWUP
-#define IS_PWR_WAKEUP_PIN(PIN) ((PIN) == PWR_WAKEUP_PIN1)
-/**
-  * @}
-  */
-
-/** @defgroup PWR_PVD_detection_level 
-  * @{
-  */ 
-#define PWR_PVDLEVEL_0                  PWR_CR_PLS_LEV0
-#define PWR_PVDLEVEL_1                  PWR_CR_PLS_LEV1
-#define PWR_PVDLEVEL_2                  PWR_CR_PLS_LEV2
-#define PWR_PVDLEVEL_3                  PWR_CR_PLS_LEV3
-#define PWR_PVDLEVEL_4                  PWR_CR_PLS_LEV4
-#define PWR_PVDLEVEL_5                  PWR_CR_PLS_LEV5
-#define PWR_PVDLEVEL_6                  PWR_CR_PLS_LEV6
-#define PWR_PVDLEVEL_7                  PWR_CR_PLS_LEV7
-#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \
-                                 ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \
-                                 ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \
-                                 ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7))
-/**
-  * @}
-  */   
- 
-/** @defgroup PWR_PVD_Mode 
-  * @{
-  */
-#define  PWR_MODE_EVT                  ((uint32_t)0x00000000)   /*!< No Interrupt */
-#define  PWR_MODE_IT_RISING            ((uint32_t)0x00000001)   /*!< External Interrupt Mode with Rising edge trigger detection */
-#define  PWR_MODE_IT_FALLING           ((uint32_t)0x00000002)   /*!< External Interrupt Mode with Falling edge trigger detection */
-#define  PWR_MODE_IT_RISING_FALLING    ((uint32_t)0x00000003)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection */
-#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_MODE_EVT) || ((MODE) == PWR_MODE_IT_RISING)|| \
-                               ((MODE) == PWR_MODE_IT_FALLING) || ((MODE) == PWR_MODE_IT_RISING_FALLING))
-/**
-  * @}
-  */ 
-
-/** @defgroup PWR_Regulator_state_in_STOP_mode 
-  * @{
-  */
-#define PWR_MAINREGULATOR_ON                        ((uint32_t)0x00000000)
-#define PWR_LOWPOWERREGULATOR_ON                    PWR_CR_LPDS
-
-#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
-                                     ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
-/**
-  * @}
-  */
-    
-/** @defgroup PWR_SLEEP_mode_entry 
-  * @{
-  */
-#define PWR_SLEEPENTRY_WFI              ((uint8_t)0x01)
-#define PWR_SLEEPENTRY_WFE              ((uint8_t)0x02)
-#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
-/**
-  * @}
-  */
-
-/** @defgroup PWR_STOP_mode_entry 
-  * @{
-  */
-#define PWR_STOPENTRY_WFI               ((uint8_t)0x01)
-#define PWR_STOPENTRY_WFE               ((uint8_t)0x02)
-#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
-/**
-  * @}
-  */
-
-/** @defgroup PWR_Regulator_Voltage_Scale 
-  * @{
-  */
-#define PWR_REGULATOR_VOLTAGE_SCALE1    ((uint32_t)0x0000C000)
-#define PWR_REGULATOR_VOLTAGE_SCALE2    ((uint32_t)0x00008000)
-#define PWR_REGULATOR_VOLTAGE_SCALE3    ((uint32_t)0x00004000)
-#define IS_PWR_REGULATOR_VOLTAGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \
-                                           ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \
-                                           ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3))
-/**
-  * @}
-  */
-
-/** @defgroup PWR_Flag 
-  * @{
-  */
-#define PWR_FLAG_WU                     PWR_CSR_WUF
-#define PWR_FLAG_SB                     PWR_CSR_SBF
-#define PWR_FLAG_PVDO                   PWR_CSR_PVDO
-#define PWR_FLAG_BRR                    PWR_CSR_BRR
-#define PWR_FLAG_VOSRDY                 PWR_CSR_VOSRDY
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */ 
-  
-/* Exported macro ------------------------------------------------------------*/
-
-/** @brief  macros configure the main internal regulator output voltage.
-  * @param  __REGULATOR__: specifies the regulator output voltage to achieve
-  *         a tradeoff between performance and power consumption when the device does
-  *         not operate at the maximum frequency (refer to the datasheets for more details).
-  *          This parameter can be one of the following values:
-  *            @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
-  *            @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
-  *            @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
-  * @retval None
-  */
-#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) (MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)))
-
-/** @brief  Check PWR flag is set or not.
-  * @param  __FLAG__: specifies the flag to check.
-  *           This parameter can be one of the following values:
-  *            @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event 
-  *                  was received from the WKUP pin or from the RTC alarm (Alarm A 
-  *                  or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
-  *                  An additional wakeup event is detected if the WKUP pin is enabled 
-  *                  (by setting the EWUP bit) when the WKUP pin level is already high.  
-  *            @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
-  *                  resumed from StandBy mode.    
-  *            @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled 
-  *                  by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode 
-  *                  For this reason, this bit is equal to 0 after Standby or reset
-  *                  until the PVDE bit is set.
-  *            @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset 
-  *                  when the device wakes up from Standby mode or by a system reset 
-  *                  or power reset.  
-  *            @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage 
-  *                 scaling output selection is ready.
-  * @retval The new state of __FLAG__ (TRUE or FALSE).
-  */
-#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
-
-/** @brief  Clear the PWR's pending flags.
-  * @param  __FLAG__: specifies the flag to clear.
-  *          This parameter can be one of the following values:
-  *            @arg PWR_FLAG_WU: Wake Up flag
-  *            @arg PWR_FLAG_SB: StandBy flag
-  */
-#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |=  (__FLAG__) << 2)
-
-#define PWR_EXTI_LINE_PVD  ((uint32_t)0x00010000)  /*!< External interrupt line 16 Connected to the PVD EXTI Line */
-/**
-  * @brief Enable the PVD Exti Line.
-  * @param  __EXTILINE__: specifies the PVD Exti sources to be enabled.
-  * This parameter can be:
-  *   @arg PWR_EXTI_LINE_PVD     
-  * @retval None.
-  */
-#define __HAL_PVD_EXTI_ENABLE_IT(__EXTILINE__)   (EXTI->IMR |= (__EXTILINE__))
-
-/**
-  * @brief Disable the PVD EXTI Line.
-  * @param  __EXTILINE__: specifies the PVD EXTI sources to be disabled.
-  * This parameter can be:
-  *  @arg PWR_EXTI_LINE_PVD    
-  * @retval None.
-  */
-#define __HAL_PVD_EXTI_DISABLE_IT(__EXTILINE__)  (EXTI->IMR &= ~(__EXTILINE__))
-
-/**
-  * @brief checks whether the specified PVD Exti interrupt flag is set or not.
-  * @param  __EXTILINE__: specifies the PVD Exti sources to be cleared.
-  * This parameter can be:
-  *   @arg PWR_EXTI_LINE_PVD  
-  * @retval EXTI PVD Line Status.
-  */
-#define __HAL_PVD_EXTI_GET_FLAG(__EXTILINE__)  (EXTI->PR & (__EXTILINE__))
-
-/**
-  * @brief Clear the PVD Exti flag.
-  * @param  __EXTILINE__: specifies the PVD Exti sources to be cleared.
-  * This parameter can be:
-  *   @arg PWR_EXTI_LINE_PVD  
-  * @retval None.
-  */
-#define __HAL_PVD_EXTI_CLEAR_FLAG(__EXTILINE__)  (EXTI->PR = (__EXTILINE__))
-
-/**
-  * @brief  Generates a Software interrupt on selected EXTI line.
-  * @param  __EXTILINE__: specifies the PVD EXTI sources to be disabled.
-  * This parameter can be:
-  *  @arg PWR_EXTI_LINE_PVD
-  * @retval None
-  */
-#define __HAL_PVD_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
-
-/* Include PWR HAL Extension module */
-#include "stm32f4xx_hal_pwr_ex.h"
-
-/* Exported functions --------------------------------------------------------*/
-
-/* Initialization and de-initialization functions *****************************/
-void HAL_PWR_DeInit(void);
-void HAL_PWR_EnableBkUpAccess(void);
-void HAL_PWR_DisableBkUpAccess(void);
-
-/* Peripheral Control functions  **********************************************/
-/* PVD configuration */
-void HAL_PWR_PVDConfig(PWR_PVDTypeDef *sConfigPVD);
-void HAL_PWR_EnablePVD(void);
-void HAL_PWR_DisablePVD(void);
-
-/* WakeUp pins configuration */
-void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
-void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
-
-/* Low Power modes entry */
-void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
-void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
-void HAL_PWR_EnterSTANDBYMode(void);
-
-void HAL_PWR_PVD_IRQHandler(void);
-void HAL_PWR_PVDCallback(void);
-
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */
-  
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* __STM32F4xx_HAL_PWR_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/