Diff: TARGET_HRM1017/TOOLCHAIN_IAR/nRF51822_QFAA.icf

Revision:

97:4298809c7c9e

Parent:

96:487b796308b0

diff -r 487b796308b0 -r 4298809c7c9e TARGET_HRM1017/TOOLCHAIN_IAR/nRF51822_QFAA.icf
--- a/TARGET_HRM1017/TOOLCHAIN_IAR/nRF51822_QFAA.icf	Tue Mar 17 14:27:45 2015 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,43 +0,0 @@
-/*###ICF### Section handled by ICF editor, don't touch! ****/
-/*-Editor annotation file-*/
-/* IcfEditorFile="$TOOLKIT_DIR$\config\ide\IcfEditor\cortex_v1_0.xml" */
-/*-Specials-*/
-define symbol __ICFEDIT_intvec_start__ = 0x00016000;
-/*-Memory Regions-*/
-define symbol __ICFEDIT_region_ROM_start__ = 0x000160c0;
-define symbol __ICFEDIT_region_ROM_end__   = 0x0003FFFF;
-define symbol __ICFEDIT_region_RAM_start__ = 0x20002000;
-define symbol __ICFEDIT_region_RAM_end__   = 0x20003FFF;
-/*-Sizes-*/
-define symbol __ICFEDIT_size_cstack__ = 0x400;
-define symbol __ICFEDIT_size_heap__   = 0x900;
-/**** End of ICF editor section. ###ICF###*/
-
-define symbol __code_start_soft_device__ = 0x0;
-
-define memory mem with size = 4G;
-define region ROM_region   = mem:[from __ICFEDIT_region_ROM_start__   to __ICFEDIT_region_ROM_end__];
-define region RAM_region   = mem:[from __ICFEDIT_region_RAM_start__   to __ICFEDIT_region_RAM_end__];
-
-define block CSTACK    with alignment = 8, size = __ICFEDIT_size_cstack__   { };
-define block HEAP      with alignment = 8, size = __ICFEDIT_size_heap__     { };
-
-initialize by copy { readwrite };
-do not initialize  { section .noinit };
-
-keep { section .intvec };
-place at address mem:__ICFEDIT_intvec_start__ { readonly section .intvec };
-place in ROM_region   { readonly };
-place in RAM_region   { readwrite,
-                        block CSTACK,
-                        block HEAP };
-                        
-/*This is used for mbed applications build inside the Embedded workbench
-Applications build with the python scritps use a hex merge so need to merge it
-inside the linker. The linker can only use binary files so the hex merge is not possible
-through the linker. That is why a binary is used instead of a hex image for the embedded project.
-*/
-if(isdefinedsymbol(SOFT_DEVICE_BIN)) 
-{
-  place at address mem:__code_start_soft_device__ { section .noinit_softdevice };
-}
\ No newline at end of file