Filippo Casamassima
my fork
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F072RB/stm32f0xx_hal_smartcard.h
- Revision:
- 85:024bf7f99721
- Child:
- 92:4fc01daae5a5
diff -r 0b3ab51c8877 -r 024bf7f99721 TARGET_NUCLEO_F072RB/stm32f0xx_hal_smartcard.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_smartcard.h Wed Jun 11 15:14:05 2014 +0100
@@ -0,0 +1,783 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_smartcard.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 28-May-2014
+ * @brief Header file of SMARTCARD HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_SMARTCARD_H
+#define __STM32F0xx_HAL_SMARTCARD_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if !defined(STM32F030x4) && !defined(STM32F030x6) && !defined(STM32F030x8)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SMARTCARD
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/**
+ * @brief SMARTCARD Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< Configures the SmartCard communication baud rate.
+ The baud rate register is computed using the following formula:
+ Baud Rate Register = ((PCLKx) / ((hsmartcard->Init.BaudRate))) */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter @ref SMARTCARD_Word_Length can only be set to 9 (8 data + 1 parity bits). */
+
+ uint32_t StopBits; /*!< Specifies the number of stop bits @ref SMARTCARD_Stop_Bits.
+ Only 1.5 stop bits are authorized in SmartCard mode. */
+
+ uint16_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref SMARTCARD_Parity
+ @note The parity is enabled by default (PCE is forced to 1).
+ Since the WordLength is forced to 8 bits + parity, M is
+ forced to 1 and the parity bit is the 9th bit. */
+
+ uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref SMARTCARD_Mode */
+
+ uint16_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
+ This parameter can be a value of @ref SMARTCARD_Clock_Polarity */
+
+ uint16_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
+ This parameter can be a value of @ref SMARTCARD_Clock_Phase */
+
+ uint16_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
+ data bit (MSB) has to be output on the SCLK pin in synchronous mode.
+ This parameter can be a value of @ref SMARTCARD_Last_Bit */
+
+ uint16_t OneBitSampling; /*!< Specifies wether a single sample or three samples' majority vote is selected.
+ Selecting the single sample method increases the receiver tolerance to clock
+ deviations. This parameter can be a value of @ref SMARTCARD_OneBit_Sampling. */
+
+ uint8_t Prescaler; /*!< Specifies the SmartCard Prescaler */
+
+ uint8_t GuardTime; /*!< Specifies the SmartCard Guard Time */
+
+ uint16_t NACKEnable; /*!< Specifies whether the SmartCard NACK transmission is enabled
+ in case of parity error.
+ This parameter can be a value of @ref SMARTCARD_NACK_Enable */
+
+ uint32_t TimeOutEnable; /*!< Specifies whether the receiver timeout is enabled.
+ This parameter can be a value of @ref SMARTCARD_Timeout_Enable*/
+
+ uint32_t TimeOutValue; /*!< Specifies the receiver time out value in number of baud blocks:
+ it is used to implement the Character Wait Time (CWT) and
+ Block Wait Time (BWT). It is coded over 24 bits. */
+
+ uint8_t BlockLength; /*!< Specifies the SmartCard Block Length in T=1 Reception mode.
+ This parameter can be any value from 0x0 to 0xFF */
+
+ uint8_t AutoRetryCount; /*!< Specifies the SmartCard auto-retry count (number of retries in
+ receive and transmit mode). When set to 0, retransmission is
+ disabled. Otherwise, its maximum value is 7 (before signalling
+ an error) */
+
+}SMARTCARD_InitTypeDef;
+
+/**
+ * @brief SMARTCARD advanced features initalization structure definition
+ */
+typedef struct
+{
+ uint32_t AdvFeatureInit; /*!< Specifies which advanced SMARTCARD features is initialized. Several
+ advanced features may be initialized at the same time. This parameter
+ can be a value of @ref SMARTCARD_Advanced_Features_Initialization_Type */
+
+ uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
+ This parameter can be a value of @ref SMARTCARD_Tx_Inv */
+
+ uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted.
+ This parameter can be a value of @ref SMARTCARD_Rx_Inv */
+
+ uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic
+ vs negative/inverted logic).
+ This parameter can be a value of @ref SMARTCARD_Data_Inv */
+
+ uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped.
+ This parameter can be a value of @ref SMARTCARD_Rx_Tx_Swap */
+
+ uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled.
+ This parameter can be a value of @ref SMARTCARD_Overrun_Disable */
+
+ uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error.
+ This parameter can be a value of @ref SMARTCARD_DMA_Disable_on_Rx_Error */
+
+ uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
+ This parameter can be a value of @ref SMARTCARD_MSB_First */
+}SMARTCARD_AdvFeatureInitTypeDef;
+
+/**
+ * @brief HAL State structures definition
+ */
+typedef enum
+{
+ HAL_SMARTCARD_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
+ HAL_SMARTCARD_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_SMARTCARD_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SMARTCARD_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_SMARTCARD_STATE_ERROR = 0x04 /*!< Error */
+}HAL_SMARTCARD_StateTypeDef;
+
+/**
+ * @brief HAL SMARTCARD Error Code structure definition
+ */
+typedef enum
+{
+ HAL_SMARTCARD_ERROR_NONE = 0x00, /*!< No error */
+ HAL_SMARTCARD_ERROR_PE = 0x01, /*!< Parity error */
+ HAL_SMARTCARD_ERROR_NE = 0x02, /*!< Noise error */
+ HAL_SMARTCARD_ERROR_FE = 0x04, /*!< frame error */
+ HAL_SMARTCARD_ERROR_ORE = 0x08, /*!< Overrun error */
+ HAL_SMARTCARD_ERROR_DMA = 0x10, /*!< DMA transfer error */
+ HAL_SMARTCARD_ERROR_RTO = 0x20 /*!< Receiver TimeOut error */
+}HAL_SMARTCARD_ErrorTypeDef;
+
+/**
+ * @brief SMARTCARD clock sources
+ */
+typedef enum
+{
+ SMARTCARD_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */
+ SMARTCARD_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */
+ SMARTCARD_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
+ SMARTCARD_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */
+ SMARTCARD_CLOCKSOURCE_UNDEFINED = 0x10 /*!< undefined clock source */
+}SMARTCARD_ClockSourceTypeDef;
+
+/**
+ * @brief SMARTCARD handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* USART registers base address */
+
+ SMARTCARD_InitTypeDef Init; /* SmartCard communication parameters */
+
+ SMARTCARD_AdvFeatureInitTypeDef AdvancedInit; /* SmartCard advanced features initialization parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to SmartCard Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* SmartCard Tx Transfer size */
+
+ uint16_t TxXferCount; /* SmartCard Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to SmartCard Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* SmartCard Rx Transfer size */
+
+ uint16_t RxXferCount; /* SmartCard Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /* SmartCard Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* SmartCard Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ HAL_SMARTCARD_StateTypeDef State; /* SmartCard communication state */
+
+ HAL_SMARTCARD_ErrorTypeDef ErrorCode; /* SmartCard Error code */
+
+}SMARTCARD_HandleTypeDef;
+
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Constants
+ * @{
+ */
+
+/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length
+ * @{
+ */
+#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
+#define IS_SMARTCARD_WORD_LENGTH(LENGTH) ((LENGTH) == SMARTCARD_WORDLENGTH_9B)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Stop Bits
+ * @{
+ */
+#define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP))
+#define IS_SMARTCARD_STOPBITS(STOPBITS) ((STOPBITS) == SMARTCARD_STOPBITS_1_5)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Parity SMARTCARD Parity
+ * @{
+ */
+#define SMARTCARD_PARITY_EVEN ((uint16_t)USART_CR1_PCE)
+#define SMARTCARD_PARITY_ODD ((uint16_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_SMARTCARD_PARITY(PARITY) (((PARITY) == SMARTCARD_PARITY_EVEN) || \
+ ((PARITY) == SMARTCARD_PARITY_ODD))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Mode SMARTCARD Transfer Mode
+ * @{
+ */
+#define SMARTCARD_MODE_RX ((uint16_t)USART_CR1_RE)
+#define SMARTCARD_MODE_TX ((uint16_t)USART_CR1_TE)
+#define SMARTCARD_MODE_TX_RX ((uint16_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_SMARTCARD_MODE(MODE) ((((MODE) & (uint16_t)0xFFF3) == 0x00) && ((MODE) != (uint16_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity
+ * @{
+ */
+#define SMARTCARD_POLARITY_LOW ((uint16_t)0x0000)
+#define SMARTCARD_POLARITY_HIGH ((uint16_t)USART_CR2_CPOL)
+#define IS_SMARTCARD_POLARITY(CPOL) (((CPOL) == SMARTCARD_POLARITY_LOW) || ((CPOL) == SMARTCARD_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase
+ * @{
+ */
+#define SMARTCARD_PHASE_1EDGE ((uint16_t)0x0000)
+#define SMARTCARD_PHASE_2EDGE ((uint16_t)USART_CR2_CPHA)
+#define IS_SMARTCARD_PHASE(CPHA) (((CPHA) == SMARTCARD_PHASE_1EDGE) || ((CPHA) == SMARTCARD_PHASE_2EDGE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit
+ * @{
+ */
+#define SMARTCARD_LASTBIT_DISABLED ((uint16_t)0x0000)
+#define SMARTCARD_LASTBIT_ENABLED ((uint16_t)USART_CR2_LBCL)
+#define IS_SMARTCARD_LASTBIT(LASTBIT) (((LASTBIT) == SMARTCARD_LASTBIT_DISABLED) || \
+ ((LASTBIT) == SMARTCARD_LASTBIT_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_OneBit_Sampling SMARTCARD One Bit Sampling Method
+ * @{
+ */
+#define SMARTCARD_ONEBIT_SAMPLING_DISABLED ((uint16_t)0x0000)
+#define SMARTCARD_ONEBIT_SAMPLING_ENABLED ((uint16_t)USART_CR3_ONEBIT)
+#define IS_SMARTCARD_ONEBIT_SAMPLING(ONEBIT) (((ONEBIT) == SMARTCARD_ONEBIT_SAMPLING_DISABLED) || \
+ ((ONEBIT) == SMARTCARD_ONEBIT_SAMPLING_ENABLED))
+/**
+ * @}
+ */
+
+
+/** @defgroup SMARTCARD_NACK_Enable SMARTCARD NACK Enable
+ * @{
+ */
+#define SMARTCARD_NACK_ENABLED ((uint16_t)USART_CR3_NACK)
+#define SMARTCARD_NACK_DISABLED ((uint16_t)0x0000)
+#define IS_SMARTCARD_NACK(NACK) (((NACK) == SMARTCARD_NACK_ENABLED) || \
+ ((NACK) == SMARTCARD_NACK_DISABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Timeout_Enable SMARTCARD Timeout Enable
+ * @{
+ */
+#define SMARTCARD_TIMEOUT_DISABLED ((uint32_t)0x00000000)
+#define SMARTCARD_TIMEOUT_ENABLED ((uint32_t)USART_CR2_RTOEN)
+#define IS_SMARTCARD_TIMEOUT(TIMEOUT) (((TIMEOUT) == SMARTCARD_TIMEOUT_DISABLED) || \
+ ((TIMEOUT) == SMARTCARD_TIMEOUT_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Advanced_Features_Initialization_Type SMARTCARD advanced feature initialization type
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_NO_INIT ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_TXINVERT_INIT ((uint32_t)0x00000001)
+#define SMARTCARD_ADVFEATURE_RXINVERT_INIT ((uint32_t)0x00000002)
+#define SMARTCARD_ADVFEATURE_DATAINVERT_INIT ((uint32_t)0x00000004)
+#define SMARTCARD_ADVFEATURE_SWAP_INIT ((uint32_t)0x00000008)
+#define SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT ((uint32_t)0x00000010)
+#define SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT ((uint32_t)0x00000020)
+#define SMARTCARD_ADVFEATURE_MSBFIRST_INIT ((uint32_t)0x00000080)
+#define IS_SMARTCARD_ADVFEATURE_INIT(INIT) ((INIT) <= (SMARTCARD_ADVFEATURE_NO_INIT | \
+ SMARTCARD_ADVFEATURE_TXINVERT_INIT | \
+ SMARTCARD_ADVFEATURE_RXINVERT_INIT | \
+ SMARTCARD_ADVFEATURE_DATAINVERT_INIT | \
+ SMARTCARD_ADVFEATURE_SWAP_INIT | \
+ SMARTCARD_ADVFEATURE_RXOVERRUNDISABLE_INIT | \
+ SMARTCARD_ADVFEATURE_DMADISABLEONERROR_INIT | \
+ SMARTCARD_ADVFEATURE_MSBFIRST_INIT))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Tx_Inv SMARTCARD advanced feature TX pin active level inversion
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_TXINV_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV)
+#define IS_SMARTCARD_ADVFEATURE_TXINV(TXINV) (((TXINV) == SMARTCARD_ADVFEATURE_TXINV_DISABLE) || \
+ ((TXINV) == SMARTCARD_ADVFEATURE_TXINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Rx_Inv SMARTCARD advanced feature RX pin active level inversion
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_RXINV_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV)
+#define IS_SMARTCARD_ADVFEATURE_RXINV(RXINV) (((RXINV) == SMARTCARD_ADVFEATURE_RXINV_DISABLE) || \
+ ((RXINV) == SMARTCARD_ADVFEATURE_RXINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Data_Inv SMARTCARD advanced feature Binary Data inversion
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_DATAINV_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV)
+#define IS_SMARTCARD_ADVFEATURE_DATAINV(DATAINV) (((DATAINV) == SMARTCARD_ADVFEATURE_DATAINV_DISABLE) || \
+ ((DATAINV) == SMARTCARD_ADVFEATURE_DATAINV_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Rx_Tx_Swap SMARTCARD advanced feature RX TX pins swap
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_SWAP_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP)
+#define IS_SMARTCARD_ADVFEATURE_SWAP(SWAP) (((SWAP) == SMARTCARD_ADVFEATURE_SWAP_DISABLE) || \
+ ((SWAP) == SMARTCARD_ADVFEATURE_SWAP_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Overrun_Disable SMARTCARD advanced feature Overrun Disable
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_OVERRUN_ENABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS)
+#define IS_SMARTCARD_OVERRUN(OVERRUN) (((OVERRUN) == SMARTCARD_ADVFEATURE_OVERRUN_ENABLE) || \
+ ((OVERRUN) == SMARTCARD_ADVFEATURE_OVERRUN_DISABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_DMA_Disable_on_Rx_Error SMARTCARD advanced feature DMA Disable on Rx Error
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE)
+#define IS_SMARTCARD_ADVFEATURE_DMAONRXERROR(DMA) (((DMA) == SMARTCARD_ADVFEATURE_DMA_ENABLEONRXERROR) || \
+ ((DMA) == SMARTCARD_ADVFEATURE_DMA_DISABLEONRXERROR))
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_MSB_First SMARTCARD advanced feature MSB first
+ * @{
+ */
+#define SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE ((uint32_t)0x00000000)
+#define SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST)
+#define IS_SMARTCARD_ADVFEATURE_MSBFIRST(MSBFIRST) (((MSBFIRST) == SMARTCARD_ADVFEATURE_MSBFIRST_DISABLE) || \
+ ((MSBFIRST) == SMARTCARD_ADVFEATURE_MSBFIRST_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup SmartCard_Flags SMARTCARD Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the ISR register
+ * @{
+ */
+#define SMARTCARD_FLAG_REACK ((uint32_t)0x00400000)
+#define SMARTCARD_FLAG_TEACK ((uint32_t)0x00200000)
+#define SMARTCARD_FLAG_BUSY ((uint32_t)0x00010000)
+#define SMARTCARD_FLAG_EOBF ((uint32_t)0x00001000)
+#define SMARTCARD_FLAG_RTOF ((uint32_t)0x00000800)
+#define SMARTCARD_FLAG_TXE ((uint32_t)0x00000080)
+#define SMARTCARD_FLAG_TC ((uint32_t)0x00000040)
+#define SMARTCARD_FLAG_RXNE ((uint32_t)0x00000020)
+#define SMARTCARD_FLAG_ORE ((uint32_t)0x00000008)
+#define SMARTCARD_FLAG_NE ((uint32_t)0x00000004)
+#define SMARTCARD_FLAG_FE ((uint32_t)0x00000002)
+#define SMARTCARD_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Interrupt_definition SMARTCARD Interrupts Definition
+ * Elements values convention: 0000ZZZZ0XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ * @{
+ */
+
+#define SMARTCARD_IT_PE ((uint16_t)0x0028)
+#define SMARTCARD_IT_TXE ((uint16_t)0x0727)
+#define SMARTCARD_IT_TC ((uint16_t)0x0626)
+#define SMARTCARD_IT_RXNE ((uint16_t)0x0525)
+
+#define SMARTCARD_IT_ERR ((uint16_t)0x0060)
+#define SMARTCARD_IT_ORE ((uint16_t)0x0300)
+#define SMARTCARD_IT_NE ((uint16_t)0x0200)
+#define SMARTCARD_IT_FE ((uint16_t)0x0100)
+
+#define SMARTCARD_IT_EOB ((uint16_t)0x0C3B)
+#define SMARTCARD_IT_RTO ((uint16_t)0x0B3A)
+/**
+ * @}
+ */
+
+
+/** @defgroup SMARTCARD_IT_CLEAR_Flags SMARTCARD Interruption Clear Flags
+ * @{
+ */
+#define SMARTCARD_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
+#define SMARTCARD_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
+#define SMARTCARD_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
+#define SMARTCARD_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
+#define SMARTCARD_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
+#define SMARTCARD_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */
+#define SMARTCARD_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Request_Parameters SMARTCARD Request Parameters
+ * @{
+ */
+#define SMARTCARD_RXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
+#define SMARTCARD_TXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
+#define IS_SMARTCARD_REQUEST_PARAMETER(PARAM) (((PARAM) == SMARTCARD_RXDATA_FLUSH_REQUEST) || \
+ ((PARAM) == SMARTCARD_TXDATA_FLUSH_REQUEST))
+/**
+ * @}
+ */
+
+
+/** @defgroup SMARTCARD_CR3_SCARCNT_LSB_POS SMARTCARD auto retry counter LSB position in CR3 register
+ * @{
+ */
+#define SMARTCARD_CR3_SCARCNT_LSB_POS ((uint32_t) 17)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_GTPR_GT_LSB_POS SMARTCARD guard time value LSB position in GTPR register
+ * @{
+ */
+#define SMARTCARD_GTPR_GT_LSB_POS ((uint32_t) 8)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_RTOR_BLEN_LSB_POS SMARTCARD block length LSB position in RTOR register
+ * @{
+ */
+#define SMARTCARD_RTOR_BLEN_LSB_POS ((uint32_t) 24)
+/**
+ * @}
+ */
+
+/** @defgroup SMARTCARD_Interruption_Mask SMARTCARD interruptions flag mask
+ * @{
+ */
+#define SMARTCARD_IT_MASK ((uint16_t)0x001F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup SMARTCARD_Exported_Macros
+ * @{
+ */
+
+/** @brief Reset SMARTCARD handle state
+ * @param __HANDLE__: SMARTCARD handle.
+ * @retval None
+ */
+#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMARTCARD_STATE_RESET)
+
+/** @brief Checks whether the specified Smartcard flag is set or not.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_FLAG_REACK: Receive enable ackowledge flag
+ * @arg SMARTCARD_FLAG_TEACK: Transmit enable ackowledge flag
+ * @arg SMARTCARD_FLAG_BUSY: Busy flag
+ * @arg SMARTCARD_FLAG_EOBF: End of block flag
+ * @arg SMARTCARD_FLAG_RTOF: Receiver timeout flag
+ * @arg SMARTCARD_FLAG_TXE: Transmit data register empty flag
+ * @arg SMARTCARD_FLAG_TC: Transmission Complete flag
+ * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag
+ * @arg SMARTCARD_FLAG_ORE: OverRun Error flag
+ * @arg SMARTCARD_FLAG_NE: Noise Error flag
+ * @arg SMARTCARD_FLAG_FE: Framing Error flag
+ * @arg SMARTCARD_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+
+/** @brief Enables the specified SmartCard interrupt.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __INTERRUPT__: specifies the SMARTCARD interrupt to enable.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+ * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
+
+/** @brief Disables the specified SmartCard interrupt.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __INTERRUPT__: specifies the SMARTCARD interrupt to disable.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+ * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & SMARTCARD_IT_MASK))))
+
+
+/** @brief Checks whether the specified SmartCard interrupt has occurred or not.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __IT__: specifies the SMARTCARD interrupt to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+ * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_ORE: OverRun Error interrupt
+ * @arg SMARTCARD_IT_NE: Noise Error interrupt
+ * @arg SMARTCARD_IT_FE: Framing Error interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
+
+/** @brief Checks whether the specified SmartCard interrupt interrupt source is enabled.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __IT__: specifies the SMARTCARD interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_IT_EOBF: End Of Block interrupt
+ * @arg SMARTCARD_IT_RTOF: Receive TimeOut interrupt
+ * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt
+ * @arg SMARTCARD_IT_TC: Transmission complete interrupt
+ * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt
+ * @arg SMARTCARD_IT_ORE: OverRun Error interrupt
+ * @arg SMARTCARD_IT_NE: Noise Error interrupt
+ * @arg SMARTCARD_IT_FE: Framing Error interrupt
+ * @arg SMARTCARD_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1 : \
+ (((((uint8_t)(__IT__)) >> 5U) == 2)? (__HANDLE__)->Instance->CR2 : \
+ (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & SMARTCARD_IT_MASK)))
+
+
+/** @brief Clears the specified SMARTCARD ISR flag, in setting the proper ICR register flag.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg USART_CLEAR_PEF: Parity Error Clear Flag
+ * @arg USART_CLEAR_FEF: Framing Error Clear Flag
+ * @arg USART_CLEAR_NEF: Noise detected Clear Flag
+ * @arg USART_CLEAR_OREF: OverRun Error Clear Flag
+ * @arg USART_CLEAR_TCF: Transmission Complete Clear Flag
+ * @arg USART_CLEAR_RTOF: Receiver Time Out Clear Flag
+ * @arg USART_CLEAR_EOBF: End Of Block Clear Flag
+ * @retval None
+ */
+#define __HAL_SMARTCARD_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR |= (uint32_t)(__IT_CLEAR__))
+
+/** @brief Set a specific SMARTCARD request flag.
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be USARTx where x: 1, 2 or 3 to select the USART peripheral.
+ * @param __REQ__: specifies the request flag to set
+ * This parameter can be one of the following values:
+ * @arg SMARTCARD_RXDATA_FLUSH_REQUEST: Receive Data flush Request
+ * @arg SMARTCARD_TXDATA_FLUSH_REQUEST: Transmit data flush Request
+ *
+ * @retval None
+ */
+#define __HAL_SMARTCARD_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
+
+/** @brief Enable the USART associated to the SMARTCARD Handle
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3 to select the USART peripheral
+ * @retval None
+ */
+#define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable the USART associated to the SMARTCARD Handle
+ * @param __HANDLE__: specifies the SMARTCARD Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3 to select the USART peripheral
+ * @retval None
+ */
+#define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/** @brief Check the Baud rate range. The maximum Baud Rate is derived from the
+ * maximum clock on F0 (i.e. 48 MHz) divided by the oversampling used
+ * on the SMARTCARD (i.e. 16)
+ * @param __BAUDRATE__: Baud rate set by the configuration function.
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_SMARTCARD_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 4500001)
+
+/** @brief Check the block length range. The maximum SMARTCARD block length is 0xFF.
+ * @param __LENGTH__: block length.
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_SMARTCARD_BLOCKLENGTH(__LENGTH__) ((__LENGTH__) <= 0xFF)
+
+/** @brief Check the receiver timeout value. The maximum SMARTCARD receiver timeout
+ * value is 0xFFFFFF.
+ * @param __TIMEOUTVALUE__: receiver timeout value.
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_SMARTCARD_TIMEOUT_VALUE(__TIMEOUTVALUE__) ((__TIMEOUTVALUE__) <= 0xFFFFFF)
+
+/** @brief Check the SMARTCARD autoretry counter value. The maximum number of
+ * retransmissions is 0x7.
+ * @param __COUNT__: number of retransmissions
+ * @retval Test result (TRUE or FALSE)
+ */
+#define IS_SMARTCARD_AUTORETRY_COUNT(__COUNT__) ((__COUNT__) <= 0x7)
+
+/**
+ * @}
+ */
+
+/* Include SMARTCARD HAL Extension module */
+#include "stm32f0xx_hal_smartcard_ex.h"
+
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsmartcard);
+HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsmartcard);
+
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t *pData, uint16_t Size);
+void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsmartcard);
+void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsmartcard);
+
+/* Peripheral Control functions ***********************************************/
+void SMARTCARD_AdvFeatureConfig(SMARTCARD_HandleTypeDef *hsmartcard);
+
+/* Peripheral State and Error functions ***************************************/
+HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsmartcard);
+uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsmartcard);
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* !defined(STM32F030x4) && !defined(STM32F030x6) && !defined(STM32F030x8) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_SMARTCARD_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/