Filippo Casamassima
my fork
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F072RB/stm32f0xx_hal_irda.h
- Revision:
- 85:024bf7f99721
- Child:
- 92:4fc01daae5a5
diff -r 0b3ab51c8877 -r 024bf7f99721 TARGET_NUCLEO_F072RB/stm32f0xx_hal_irda.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_irda.h Wed Jun 11 15:14:05 2014 +0100
@@ -0,0 +1,581 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_irda.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 28-May-2014
+ * @brief Header file of IRDA HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_IRDA_H
+#define __STM32F0xx_HAL_IRDA_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8)
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup IRDA
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+/**
+ * @brief IRDA Init Structure definition
+ */
+typedef struct
+{
+ uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate.
+ The baud rate register is computed using the following formula:
+ Baud Rate Register = ((PCLKx) / ((hirda->Init.BaudRate))) */
+
+ uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
+ This parameter can be a value of @ref IRDAEx_Word_Length */
+
+ uint16_t Parity; /*!< Specifies the parity mode.
+ This parameter can be a value of @ref IRDA_Parity
+ @note When parity is enabled, the computed parity is inserted
+ at the MSB position of the transmitted data (9th bit when
+ the word length is set to 9 data bits; 8th bit when the
+ word length is set to 8 data bits). */
+
+ uint16_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled.
+ This parameter can be a value of @ref IRDA_Mode */
+
+ uint8_t Prescaler; /*!< Specifies the Prescaler value for dividing the UART/USART source clock
+ to achieve low-power frequency.
+ @note Prescaler value 0 is forbidden */
+
+ uint16_t PowerMode; /*!< Specifies the IRDA power mode.
+ This parameter can be a value of @ref IRDA_Low_Power */
+}IRDA_InitTypeDef;
+
+/**
+ * @brief HAL IRDA State structures definition
+ */
+typedef enum
+{
+ HAL_IRDA_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
+ HAL_IRDA_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_IRDA_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_IRDA_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_IRDA_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_IRDA_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_IRDA_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_IRDA_STATE_ERROR = 0x04 /*!< Error */
+}HAL_IRDA_StateTypeDef;
+
+/**
+ * @brief HAL IRDA Error Code structure definition
+ */
+typedef enum
+{
+ HAL_IRDA_ERROR_NONE = 0x00, /*!< No error */
+ HAL_IRDA_ERROR_PE = 0x01, /*!< Parity error */
+ HAL_IRDA_ERROR_NE = 0x02, /*!< Noise error */
+ HAL_IRDA_ERROR_FE = 0x04, /*!< frame error */
+ HAL_IRDA_ERROR_ORE = 0x08, /*!< Overrun error */
+ HAL_IRDA_ERROR_DMA = 0x10 /*!< DMA transfer error */
+}HAL_IRDA_ErrorTypeDef;
+
+/**
+ * @brief IRDA handle Structure definition
+ */
+typedef struct
+{
+ USART_TypeDef *Instance; /* USART registers base address */
+
+ IRDA_InitTypeDef Init; /* IRDA communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to IRDA Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* IRDA Tx Transfer size */
+
+ uint16_t TxXferCount; /* IRDA Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to IRDA Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* IRDA Rx Transfer size */
+
+ uint16_t RxXferCount; /* IRDA Rx Transfer Counter */
+
+ uint16_t Mask; /* USART RX RDR register mask */
+
+ DMA_HandleTypeDef *hdmatx; /* IRDA Tx DMA Handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* IRDA Rx DMA Handle parameters */
+
+ HAL_LockTypeDef Lock; /* Locking object */
+
+ HAL_IRDA_StateTypeDef State; /* IRDA communication state */
+
+ HAL_IRDA_ErrorTypeDef ErrorCode; /* IRDA Error code */
+
+}IRDA_HandleTypeDef;
+
+/**
+ * @brief IRDA Configuration enumeration values definition
+ */
+typedef enum
+{
+ IRDA_BAUDRATE = 0x00,
+ IRDA_PARITY = 0x01,
+ IRDA_WORDLENGTH = 0x02,
+ IRDA_MODE = 0x03,
+ IRDA_PRESCALER = 0x04,
+ IRDA_POWERMODE = 0x05
+}IRDA_ControlTypeDef;
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Constants IRDA Exported Constants
+ * @{
+ */
+
+/** @defgroup IRDA_Parity IRDA Parity
+ * @{
+ */
+#define IRDA_PARITY_NONE ((uint16_t)0x0000)
+#define IRDA_PARITY_EVEN ((uint16_t)USART_CR1_PCE)
+#define IRDA_PARITY_ODD ((uint16_t)(USART_CR1_PCE | USART_CR1_PS))
+#define IS_IRDA_PARITY(PARITY) (((PARITY) == IRDA_PARITY_NONE) || \
+ ((PARITY) == IRDA_PARITY_EVEN) || \
+ ((PARITY) == IRDA_PARITY_ODD))
+/**
+ * @}
+ */
+
+
+/** @defgroup IRDA_Transfer_Mode IRDA Transfer Mode
+ * @{
+ */
+#define IRDA_MODE_RX ((uint16_t)USART_CR1_RE)
+#define IRDA_MODE_TX ((uint16_t)USART_CR1_TE)
+#define IRDA_MODE_TX_RX ((uint16_t)(USART_CR1_TE |USART_CR1_RE))
+#define IS_IRDA_TX_RX_MODE(MODE) ((((MODE) & (~((uint16_t)(IRDA_MODE_TX_RX)))) == (uint16_t)0x00) && ((MODE) != (uint16_t)0x00))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Low_Power IRDA Low Power
+ * @{
+ */
+#define IRDA_POWERMODE_NORMAL ((uint16_t)0x0000)
+#define IRDA_POWERMODE_LOWPOWER ((uint16_t)USART_CR3_IRLP)
+#define IS_IRDA_POWERMODE(MODE) (((MODE) == IRDA_POWERMODE_LOWPOWER) || \
+ ((MODE) == IRDA_POWERMODE_NORMAL))
+/**
+ * @}
+ */
+
+ /** @defgroup IRDA_State IRDA State
+ * @{
+ */
+#define IRDA_STATE_DISABLE ((uint16_t)0x0000)
+#define IRDA_STATE_ENABLE ((uint16_t)USART_CR1_UE)
+#define IS_IRDA_STATE(STATE) (((STATE) == IRDA_STATE_DISABLE) || \
+ ((STATE) == IRDA_STATE_ENABLE))
+/**
+ * @}
+ */
+
+ /** @defgroup IRDA_Mode IRDA Mode
+ * @{
+ */
+#define IRDA_MODE_DISABLE ((uint16_t)0x0000)
+#define IRDA_MODE_ENABLE ((uint16_t)USART_CR3_IREN)
+#define IS_IRDA_MODE(STATE) (((STATE) == IRDA_MODE_DISABLE) || \
+ ((STATE) == IRDA_MODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_One_Bit IRDA One Bit Sampling
+ * @{
+ */
+#define IRDA_ONE_BIT_SAMPLE_DISABLED ((uint16_t)0x00000000)
+#define IRDA_ONE_BIT_SAMPLE_ENABLED ((uint16_t)USART_CR3_ONEBIT)
+#define IS_IRDA_ONEBIT_SAMPLE(ONEBIT) (((ONEBIT) == IRDA_ONE_BIT_SAMPLE_DISABLED) || \
+ ((ONEBIT) == IRDA_ONE_BIT_SAMPLE_ENABLED))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_DMA_Tx IRDA DMA Tx
+ * @{
+ */
+#define IRDA_DMA_TX_DISABLE ((uint16_t)0x00000000)
+#define IRDA_DMA_TX_ENABLE ((uint16_t)USART_CR3_DMAT)
+#define IS_IRDA_DMA_TX(DMATX) (((DMATX) == IRDA_DMA_TX_DISABLE) || \
+ ((DMATX) == IRDA_DMA_TX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_DMA_Rx IRDA DMA Rx
+ * @{
+ */
+#define IRDA_DMA_RX_DISABLE ((uint16_t)0x0000)
+#define IRDA_DMA_RX_ENABLE ((uint16_t)USART_CR3_DMAR)
+#define IS_IRDA_DMA_RX(DMARX) (((DMARX) == IRDA_DMA_RX_DISABLE) || \
+ ((DMARX) == IRDA_DMA_RX_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Flags IRDA Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the ISR register
+ * @{
+ */
+#define IRDA_FLAG_REACK ((uint32_t)0x00400000)
+#define IRDA_FLAG_TEACK ((uint32_t)0x00200000)
+#define IRDA_FLAG_BUSY ((uint32_t)0x00010000)
+#define IRDA_FLAG_ABRF ((uint32_t)0x00008000)
+#define IRDA_FLAG_ABRE ((uint32_t)0x00004000)
+#define IRDA_FLAG_TXE ((uint32_t)0x00000080)
+#define IRDA_FLAG_TC ((uint32_t)0x00000040)
+#define IRDA_FLAG_RXNE ((uint32_t)0x00000020)
+#define IRDA_FLAG_ORE ((uint32_t)0x00000008)
+#define IRDA_FLAG_NE ((uint32_t)0x00000004)
+#define IRDA_FLAG_FE ((uint32_t)0x00000002)
+#define IRDA_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Interrupt_definition IRDA Interrupts Definition
+ * Elements values convention: 0000ZZZZ0XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ * @{
+ */
+#define IRDA_IT_PE ((uint16_t)0x0028)
+#define IRDA_IT_TXE ((uint16_t)0x0727)
+#define IRDA_IT_TC ((uint16_t)0x0626)
+#define IRDA_IT_RXNE ((uint16_t)0x0525)
+#define IRDA_IT_IDLE ((uint16_t)0x0424)
+
+
+
+/** Elements values convention: 000000000XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ */
+#define IRDA_IT_ERR ((uint16_t)0x0060)
+
+/** Elements values convention: 0000ZZZZ00000000b
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ */
+#define IRDA_IT_ORE ((uint16_t)0x0300)
+#define IRDA_IT_NE ((uint16_t)0x0200)
+#define IRDA_IT_FE ((uint16_t)0x0100)
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_IT_CLEAR_Flags IRDA Interruption Clear Flags
+ * @{
+ */
+#define IRDA_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
+#define IRDA_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
+#define IRDA_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
+#define IRDA_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
+#define IRDA_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
+/**
+ * @}
+ */
+
+
+
+/** @defgroup IRDA_Request_Parameters IRDA Request Parameters
+ * @{
+ */
+#define IRDA_AUTOBAUD_REQUEST ((uint16_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */
+#define IRDA_RXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
+#define IRDA_TXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
+#define IS_IRDA_REQUEST_PARAMETER(PARAM) (((PARAM) == IRDA_AUTOBAUD_REQUEST) || \
+ ((PARAM) == IRDA_SENDBREAK_REQUEST) || \
+ ((PARAM) == IRDA_MUTE_MODE_REQUEST) || \
+ ((PARAM) == IRDA_RXDATA_FLUSH_REQUEST) || \
+ ((PARAM) == IRDA_TXDATA_FLUSH_REQUEST))
+/**
+ * @}
+ */
+
+/** @defgroup IRDA_Interruption_Mask IRDA interruptions flag mask
+ * @{
+ */
+#define IRDA_IT_MASK ((uint16_t)0x001F)
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported macros -----------------------------------------------------------*/
+/** @defgroup IRDA_Exported_Macros
+ * @{
+ */
+
+/** @brief Reset IRDA handle state
+ * @param __HANDLE__: IRDA handle.
+ * @retval None
+ */
+#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IRDA_STATE_RESET)
+
+/** @brief Checks whether the specified IRDA flag is set or not.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_FLAG_REACK: Receive enable ackowledge flag
+ * @arg IRDA_FLAG_TEACK: Transmit enable ackowledge flag
+ * @arg IRDA_FLAG_BUSY: Busy flag
+ * @arg IRDA_FLAG_ABRF: Auto Baud rate detection flag
+ * @arg IRDA_FLAG_ABRE: Auto Baud rate detection error flag
+ * @arg IRDA_FLAG_TXE: Transmit data register empty flag
+ * @arg IRDA_FLAG_TC: Transmission Complete flag
+ * @arg IRDA_FLAG_RXNE: Receive data register not empty flag
+ * @arg IRDA_FLAG_IDLE: Idle Line detection flag
+ * @arg IRDA_FLAG_ORE: OverRun Error flag
+ * @arg IRDA_FLAG_NE: Noise Error flag
+ * @arg IRDA_FLAG_FE: Framing Error flag
+ * @arg IRDA_FLAG_PE: Parity Error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
+
+
+/** @brief Enables the specified IRDA interrupt.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __INTERRUPT__: specifies the IRDA interrupt source to enable.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK))))
+
+/** @brief Disables the specified IRDA interrupt.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __INTERRUPT__: specifies the IRDA interrupt source to disable.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
+ * @retval None
+ */
+#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
+ ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))))
+
+
+/** @brief Checks whether the specified IRDA interrupt has occurred or not.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __IT__: specifies the IRDA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_ORE: OverRun Error interrupt
+ * @arg IRDA_IT_NE: Noise Error interrupt
+ * @arg IRDA_IT_FE: Framing Error interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1U << ((__IT__)>> 0x08)))
+
+/** @brief Checks whether the specified IRDA interrupt source is enabled.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __IT__: specifies the IRDA interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
+ * @arg IRDA_IT_TC: Transmission complete interrupt
+ * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
+ * @arg IRDA_IT_IDLE: Idle line detection interrupt
+ * @arg IRDA_IT_ORE: OverRun Error interrupt
+ * @arg IRDA_IT_NE: Noise Error interrupt
+ * @arg IRDA_IT_FE: Framing Error interrupt
+ * @arg IRDA_IT_PE: Parity Error interrupt
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5U) == 2)? \
+ (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & IRDA_IT_MASK)))
+
+
+/** @brief Clears the specified IRDA ISR flag, in setting the proper ICR register flag.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
+ * to clear the corresponding interrupt
+ * This parameter can be one of the following values:
+ * @arg IRDA_CLEAR_PEF: Parity Error Clear Flag
+ * @arg IRDA_CLEAR_FEF: Framing Error Clear Flag
+ * @arg IRDA_CLEAR_NEF: Noise detected Clear Flag
+ * @arg IRDA_CLEAR_OREF: OverRun Error Clear Flag
+ * @arg IRDA_CLEAR_TCF: Transmission Complete Clear Flag
+ * @retval None
+ */
+#define __HAL_IRDA_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR |= (uint32_t)(__IT_CLEAR__))
+
+
+/** @brief Set a specific IRDA request flag.
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @param __REQ__: specifies the request flag to set
+ * This parameter can be one of the following values:
+ * @arg IRDA_AUTOBAUD_REQUEST: Auto-Baud Rate Request
+ * @arg IRDA_RXDATA_FLUSH_REQUEST: Receive Data flush Request
+ * @arg IRDA_TXDATA_FLUSH_REQUEST: Transmit data flush Request
+ *
+ * @retval None
+ */
+#define __HAL_IRDA_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
+
+
+
+/** @brief Enable UART/USART associated to IRDA Handle
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @retval None
+ */
+#define __HAL_IRDA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
+
+/** @brief Disable UART/USART associated to IRDA Handle
+ * @param __HANDLE__: specifies the IRDA Handle.
+ * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
+ * UART peripheral
+ * @retval None
+ */
+#define __HAL_IRDA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
+
+/** @brief Ensure that IRDA Baud rate is less or equal to maximum value
+ * @param __BAUDRATE__: specifies the IRDA Baudrate set by the user.
+ * @retval True or False
+ */
+#define IS_IRDA_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 115201)
+
+/** @brief Ensure that IRDA prescaler value is strictly larger than 0
+ * @param __PRESCALER__: specifies the IRDA prescaler value set by the user.
+ * @retval True or False
+ */
+#define IS_IRDA_PRESCALER(__PRESCALER__) ((__PRESCALER__) > 0)
+
+/**
+ * @}
+ */
+
+/* Include IRDA HAL Extension module */
+#include "stm32f0xx_hal_irda_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda);
+HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda);
+
+
+/* IO operation functions *****************************************************/
+HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
+void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda);
+void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda);
+
+/* Peripheral State and Error functions ***************************************/
+HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda);
+uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_IRDA_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/