Filippo Casamassima
my fork
Fork of
mbed
by 
mbed official
TARGET_NUCLEO_F302R8/stm32f3xx_hal_sdadc.h
- Committer:
- Kojto
- Date:
- 2014-10-28
- Revision:
- 90:cb3d968589d8
File content as of revision 90:cb3d968589d8:
/**
******************************************************************************
* @file stm32f3xx_hal_sdadc.h
* @author MCD Application Team
* @version V1.1.0
* @date 12-Sept-2014
* @brief This file contains all the functions prototypes for the SDADC
* firmware library.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F3xx_SDADC_H
#define __STM32F3xx_SDADC_H
#ifdef __cplusplus
extern "C" {
#endif
#if defined(STM32F373xC) || defined(STM32F378xx)
/* Includes ------------------------------------------------------------------*/
#include "stm32f3xx_hal_def.h"
/** @addtogroup STM32F3xx_HAL_Driver
* @{
*/
/** @addtogroup SDADC
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup SDADC_Exported_Types SDADC Exported Types
* @{
*/
/**
* @brief HAL SDADC States definition
*/
typedef enum
{
HAL_SDADC_STATE_RESET = 0x00, /*!< SDADC not initialized */
HAL_SDADC_STATE_READY = 0x01, /*!< SDADC initialized and ready for use */
HAL_SDADC_STATE_CALIB = 0x02, /*!< SDADC calibration in progress */
HAL_SDADC_STATE_REG = 0x03, /*!< SDADC regular conversion in progress */
HAL_SDADC_STATE_INJ = 0x04, /*!< SDADC injected conversion in progress */
HAL_SDADC_STATE_REG_INJ = 0x05, /*!< SDADC regular and injected conversions in progress */
HAL_SDADC_STATE_ERROR = 0xFF, /*!< SDADC state error */
}HAL_SDADC_StateTypeDef;
/**
* @brief SDADC Init Structure definition
*/
typedef struct
{
uint32_t IdleLowPowerMode; /*!< Specifies if SDADC can enter in power down or standby when idle.
This parameter can be a value of @ref SDADC_Idle_Low_Power_Mode */
uint32_t FastConversionMode; /*!< Specifies if Fast conversion mode is enabled or not.
This parameter can be a value of @ref SDADC_Fast_Conv_Mode */
uint32_t SlowClockMode; /*!< Specifies if slow clock mode is enabled or not.
This parameter can be a value of @ref SDADC_Slow_Clock_Mode */
uint32_t ReferenceVoltage; /*!< Specifies the reference voltage.
This parameter can be a value of @ref SDADC_Reference_Voltage */
}SDADC_InitTypeDef;
/**
* @brief SDADC handle Structure definition
*/
typedef struct
{
SDADC_TypeDef *Instance; /*!< SDADC registers base address */
SDADC_InitTypeDef Init; /*!< SDADC init parameters */
DMA_HandleTypeDef *hdma; /*!< SDADC DMA Handle parameters */
uint32_t RegularContMode; /*!< Regular conversion continuous mode */
uint32_t InjectedContMode; /*!< Injected conversion continuous mode */
uint32_t InjectedChannelsNbr; /*!< Number of channels in injected sequence */
uint32_t InjConvRemaining; /*!< Injected conversion remaining */
uint32_t RegularTrigger; /*!< Current trigger used for regular conversion */
uint32_t InjectedTrigger; /*!< Current trigger used for injected conversion */
uint32_t ExtTriggerEdge; /*!< Rising, falling or both edges selected */
uint32_t RegularMultimode; /*!< current type of regular multimode */
uint32_t InjectedMultimode; /*!< Current type of injected multimode */
HAL_SDADC_StateTypeDef State; /*!< SDADC state */
uint32_t ErrorCode; /*!< SDADC Error code */
}SDADC_HandleTypeDef;
/**
* @brief SDADC Configuration Register Parameter Structure
*/
typedef struct
{
uint32_t InputMode; /*!< Specifies the input mode (single ended, differential...)
This parameter can be any value of @ref SDADC_InputMode */
uint32_t Gain; /*!< Specifies the gain setting.
This parameter can be any value of @ref SDADC_Gain */
uint32_t CommonMode; /*!< Specifies the common mode setting (VSSA, VDDA, VDDA/2).
This parameter can be any value of @ref SDADC_CommonMode */
uint32_t Offset; /*!< Specifies the 12-bit offset value.
This parameter can be any value lower or equal to 0x00000FFF */
}SDADC_ConfParamTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup SDADC_Exported_Constants SDADC Exported Constants
* @{
*/
/** @defgroup SDADC_Idle_Low_Power_Mode SDADC Idle Low Power Mode
* @{
*/
#define SDADC_LOWPOWER_NONE ((uint32_t)0x00000000)
#define SDADC_LOWPOWER_POWERDOWN SDADC_CR1_PDI
#define SDADC_LOWPOWER_STANDBY SDADC_CR1_SBI
#define IS_SDADC_LOWPOWER_MODE(LOWPOWER) (((LOWPOWER) == SDADC_LOWPOWER_NONE) || \
((LOWPOWER) == SDADC_LOWPOWER_POWERDOWN) || \
((LOWPOWER) == SDADC_LOWPOWER_STANDBY))
/**
* @}
*/
/** @defgroup SDADC_Fast_Conv_Mode SDADC Fast Conversion Mode
* @{
*/
#define SDADC_FAST_CONV_DISABLE ((uint32_t)0x00000000)
#define SDADC_FAST_CONV_ENABLE SDADC_CR2_FAST
#define IS_SDADC_FAST_CONV_MODE(FAST) (((FAST) == SDADC_FAST_CONV_DISABLE) || \
((FAST) == SDADC_FAST_CONV_ENABLE))
/**
* @}
*/
/** @defgroup SDADC_Slow_Clock_Mode SDADC Slow Clock Mode
* @{
*/
#define SDADC_SLOW_CLOCK_DISABLE ((uint32_t)0x00000000)
#define SDADC_SLOW_CLOCK_ENABLE SDADC_CR1_SLOWCK
#define IS_SDADC_SLOW_CLOCK_MODE(MODE) (((MODE) == SDADC_SLOW_CLOCK_DISABLE) || \
((MODE) == SDADC_SLOW_CLOCK_ENABLE))
/**
* @}
*/
/** @defgroup SDADC_Reference_Voltage SDADC Reference Voltage
* @{
*/
#define SDADC_VREF_EXT ((uint32_t)0x00000000) /*!< The reference voltage is forced externally using VREF pin */
#define SDADC_VREF_VREFINT1 SDADC_CR1_REFV_0 /*!< The reference voltage is forced internally to 1.22V VREFINT */
#define SDADC_VREF_VREFINT2 SDADC_CR1_REFV_1 /*!< The reference voltage is forced internally to 1.8V VREFINT */
#define SDADC_VREF_VDDA SDADC_CR1_REFV /*!< The reference voltage is forced internally to VDDA */
#define IS_SDADC_VREF(VREF) (((VREF) == SDADC_VREF_EXT) || \
((VREF) == SDADC_VREF_VREFINT1) || \
((VREF) == SDADC_VREF_VREFINT2) || \
((VREF) == SDADC_VREF_VDDA))
/**
* @}
*/
/** @defgroup SDADC_ConfIndex SDADC Configuration Index
* @{
*/
#define SDADC_CONF_INDEX_0 ((uint32_t)0x00000000) /*!< Configuration 0 Register selected */
#define SDADC_CONF_INDEX_1 ((uint32_t)0x00000001) /*!< Configuration 1 Register selected */
#define SDADC_CONF_INDEX_2 ((uint32_t)0x00000002) /*!< Configuration 2 Register selected */
#define IS_SDADC_CONF_INDEX(CONF) (((CONF) == SDADC_CONF_INDEX_0) || \
((CONF) == SDADC_CONF_INDEX_1) || \
((CONF) == SDADC_CONF_INDEX_2))
/**
* @}
*/
/** @defgroup SDADC_InputMode SDADC Input Mode
* @{
*/
#define SDADC_INPUT_MODE_DIFF ((uint32_t)0x00000000) /*!< Conversions are executed in differential mode */
#define SDADC_INPUT_MODE_SE_OFFSET SDADC_CONF0R_SE0_0 /*!< Conversions are executed in single ended offset mode */
#define SDADC_INPUT_MODE_SE_ZERO_REFERENCE SDADC_CONF0R_SE0 /*!< Conversions are executed in single ended zero-volt reference mode */
#define IS_SDADC_INPUT_MODE(MODE) (((MODE) == SDADC_INPUT_MODE_DIFF) || \
((MODE) == SDADC_INPUT_MODE_SE_OFFSET) || \
((MODE) == SDADC_INPUT_MODE_SE_ZERO_REFERENCE))
/**
* @}
*/
/** @defgroup SDADC_Gain SDADC Gain
* @{
*/
#define SDADC_GAIN_1 ((uint32_t)0x00000000) /*!< Gain equal to 1 */
#define SDADC_GAIN_2 SDADC_CONF0R_GAIN0_0 /*!< Gain equal to 2 */
#define SDADC_GAIN_4 SDADC_CONF0R_GAIN0_1 /*!< Gain equal to 4 */
#define SDADC_GAIN_8 ((uint32_t)0x00300000) /*!< Gain equal to 8 */
#define SDADC_GAIN_16 SDADC_CONF0R_GAIN0_2 /*!< Gain equal to 16 */
#define SDADC_GAIN_32 ((uint32_t)0x00500000) /*!< Gain equal to 32 */
#define SDADC_GAIN_1_2 SDADC_CONF0R_GAIN0 /*!< Gain equal to 1/2 */
#define IS_SDADC_GAIN(GAIN) (((GAIN) == SDADC_GAIN_1) || \
((GAIN) == SDADC_GAIN_2) || \
((GAIN) == SDADC_GAIN_4) || \
((GAIN) == SDADC_GAIN_8) || \
((GAIN) == SDADC_GAIN_16) || \
((GAIN) == SDADC_GAIN_32) || \
((GAIN) == SDADC_GAIN_1_2))
/**
* @}
*/
/** @defgroup SDADC_CommonMode SDADC Common Mode
* @{
*/
#define SDADC_COMMON_MODE_VSSA ((uint32_t)0x00000000) /*!< Select SDADC VSSA as common mode */
#define SDADC_COMMON_MODE_VDDA_2 SDADC_CONF0R_COMMON0_0 /*!< Select SDADC VDDA/2 as common mode */
#define SDADC_COMMON_MODE_VDDA SDADC_CONF0R_COMMON0_1 /*!< Select SDADC VDDA as common mode */
#define IS_SDADC_COMMON_MODE(MODE) (((MODE) == SDADC_COMMON_MODE_VSSA) || \
((MODE) == SDADC_COMMON_MODE_VDDA_2) || \
((MODE) == SDADC_COMMON_MODE_VDDA))
/**
* @}
*/
/** @defgroup SDADC_Offset SDADC Offset
* @{
*/
#define IS_SDADC_OFFSET_VALUE(VALUE) ((VALUE) <= 0x00000FFF)
/**
* @}
*/
/** @defgroup SDADC_Channel_Selection SDADC Channel Selection
* @{
*/
/* SDADC Channels ------------------------------------------------------------*/
/* The SDADC channels are defined as follows:
- in 16-bit LSB the channel mask is set
- in 16-bit MSB the channel number is set
e.g. for channel 5 definition:
- the channel mask is 0x00000020 (bit 5 is set)
- the channel number 5 is 0x00050000
--> Consequently, channel 5 definition is 0x00000020 | 0x00050000 = 0x00050020 */
#define SDADC_CHANNEL_0 ((uint32_t)0x00000001)
#define SDADC_CHANNEL_1 ((uint32_t)0x00010002)
#define SDADC_CHANNEL_2 ((uint32_t)0x00020004)
#define SDADC_CHANNEL_3 ((uint32_t)0x00030008)
#define SDADC_CHANNEL_4 ((uint32_t)0x00040010)
#define SDADC_CHANNEL_5 ((uint32_t)0x00050020)
#define SDADC_CHANNEL_6 ((uint32_t)0x00060040)
#define SDADC_CHANNEL_7 ((uint32_t)0x00070080)
#define SDADC_CHANNEL_8 ((uint32_t)0x00080100)
/* Just one channel of the 9 channels can be selected for regular conversion */
#define IS_SDADC_REGULAR_CHANNEL(CHANNEL) (((CHANNEL) == SDADC_CHANNEL_0) || \
((CHANNEL) == SDADC_CHANNEL_1) || \
((CHANNEL) == SDADC_CHANNEL_2) || \
((CHANNEL) == SDADC_CHANNEL_3) || \
((CHANNEL) == SDADC_CHANNEL_4) || \
((CHANNEL) == SDADC_CHANNEL_5) || \
((CHANNEL) == SDADC_CHANNEL_6) || \
((CHANNEL) == SDADC_CHANNEL_7) || \
((CHANNEL) == SDADC_CHANNEL_8))
/* Any or all of the 9 channels can be selected for injected conversion */
#define IS_SDADC_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) != 0) && ((CHANNEL) <= 0x000F01FF))
/**
* @}
*/
/** @defgroup SDADC_CalibrationSequence SDADC Calibration Sequence
* @{
*/
#define SDADC_CALIBRATION_SEQ_1 ((uint32_t)0x00000000) /*!< One calibration sequence to calculate offset of conf0 (OFFSET0[11:0]) */
#define SDADC_CALIBRATION_SEQ_2 SDADC_CR2_CALIBCNT_0 /*!< Two calibration sequences to calculate offset of conf0 and conf1 (OFFSET0[11:0] and OFFSET1[11:0]) */
#define SDADC_CALIBRATION_SEQ_3 SDADC_CR2_CALIBCNT_1 /*!< Three calibration sequences to calculate offset of conf0, conf1 and conf2 (OFFSET0[11:0], OFFSET1[11:0], and OFFSET2[11:0]) */
#define IS_SDADC_CALIB_SEQUENCE(SEQUENCE) (((SEQUENCE) == SDADC_CALIBRATION_SEQ_1) || \
((SEQUENCE) == SDADC_CALIBRATION_SEQ_2) || \
((SEQUENCE) == SDADC_CALIBRATION_SEQ_3))
/**
* @}
*/
/** @defgroup SDADC_ContinuousMode SDADC Continuous Mode
* @{
*/
#define SDADC_CONTINUOUS_CONV_OFF ((uint32_t)0x00000000) /*!< Conversion are not continuous */
#define SDADC_CONTINUOUS_CONV_ON ((uint32_t)0x00000001) /*!< Conversion are continuous */
#define IS_SDADC_CONTINUOUS_MODE(MODE) (((MODE) == SDADC_CONTINUOUS_CONV_OFF) || \
((MODE) == SDADC_CONTINUOUS_CONV_ON))
/**
* @}
*/
/** @defgroup SDADC_Trigger SDADC Trigger
* @{
*/
#define SDADC_SOFTWARE_TRIGGER ((uint32_t)0x00000000) /*!< Software trigger */
#define SDADC_SYNCHRONOUS_TRIGGER ((uint32_t)0x00000001) /*!< Synchronous with SDADC1 (only for SDADC2 and SDADC3) */
#define SDADC_EXTERNAL_TRIGGER ((uint32_t)0x00000002) /*!< External trigger */
#define IS_SDADC_REGULAR_TRIGGER(TRIGGER) (((TRIGGER) == SDADC_SOFTWARE_TRIGGER) || \
((TRIGGER) == SDADC_SYNCHRONOUS_TRIGGER))
#define IS_SDADC_INJECTED_TRIGGER(TRIGGER) (((TRIGGER) == SDADC_SOFTWARE_TRIGGER) || \
((TRIGGER) == SDADC_SYNCHRONOUS_TRIGGER) || \
((TRIGGER) == SDADC_EXTERNAL_TRIGGER))
/**
* @}
*/
/** @defgroup SDADC_InjectedExtTrigger SDADC Injected External Trigger
* @{
*/
#define SDADC_EXT_TRIG_TIM13_CC1 ((uint32_t)0x00000000) /*!< Trigger source for SDADC1 */
#define SDADC_EXT_TRIG_TIM14_CC1 ((uint32_t)0x00000100) /*!< Trigger source for SDADC1 */
#define SDADC_EXT_TRIG_TIM16_CC1 ((uint32_t)0x00000000) /*!< Trigger source for SDADC3 */
#define SDADC_EXT_TRIG_TIM17_CC1 ((uint32_t)0x00000000) /*!< Trigger source for SDADC2 */
#define SDADC_EXT_TRIG_TIM12_CC1 ((uint32_t)0x00000100) /*!< Trigger source for SDADC2 */
#define SDADC_EXT_TRIG_TIM12_CC2 ((uint32_t)0x00000100) /*!< Trigger source for SDADC3 */
#define SDADC_EXT_TRIG_TIM15_CC2 ((uint32_t)0x00000200) /*!< Trigger source for SDADC1 */
#define SDADC_EXT_TRIG_TIM2_CC3 ((uint32_t)0x00000200) /*!< Trigger source for SDADC2 */
#define SDADC_EXT_TRIG_TIM2_CC4 ((uint32_t)0x00000200) /*!< Trigger source for SDADC3 */
#define SDADC_EXT_TRIG_TIM3_CC1 ((uint32_t)0x00000300) /*!< Trigger source for SDADC1 */
#define SDADC_EXT_TRIG_TIM3_CC2 ((uint32_t)0x00000300) /*!< Trigger source for SDADC2 */
#define SDADC_EXT_TRIG_TIM3_CC3 ((uint32_t)0x00000300) /*!< Trigger source for SDADC3 */
#define SDADC_EXT_TRIG_TIM4_CC1 ((uint32_t)0x00000400) /*!< Trigger source for SDADC1 */
#define SDADC_EXT_TRIG_TIM4_CC2 ((uint32_t)0x00000400) /*!< Trigger source for SDADC2 */
#define SDADC_EXT_TRIG_TIM4_CC3 ((uint32_t)0x00000400) /*!< Trigger source for SDADC3 */
#define SDADC_EXT_TRIG_TIM19_CC2 ((uint32_t)0x00000500) /*!< Trigger source for SDADC1 */
#define SDADC_EXT_TRIG_TIM19_CC3 ((uint32_t)0x00000500) /*!< Trigger source for SDADC2 */
#define SDADC_EXT_TRIG_TIM19_CC4 ((uint32_t)0x00000500) /*!< Trigger source for SDADC3 */
#define SDADC_EXT_TRIG_EXTI11 ((uint32_t)0x00000700) /*!< Trigger source for SDADC1, SDADC2 and SDADC3 */
#define SDADC_EXT_TRIG_EXTI15 ((uint32_t)0x00000600) /*!< Trigger source for SDADC1, SDADC2 and SDADC3 */
#define IS_SDADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == SDADC_EXT_TRIG_TIM13_CC1) || \
((INJTRIG) == SDADC_EXT_TRIG_TIM14_CC1) || \
((INJTRIG) == SDADC_EXT_TRIG_TIM16_CC1) || \
((INJTRIG) == SDADC_EXT_TRIG_TIM17_CC1) || \
((INJTRIG) == SDADC_EXT_TRIG_TIM12_CC1) || \
((INJTRIG) == SDADC_EXT_TRIG_TIM12_CC2) || \
((INJTRIG) == SDADC_EXT_TRIG_TIM15_CC2) || \
((INJTRIG) == SDADC_EXT_TRIG_TIM2_CC3) || \
((INJTRIG) == SDADC_EXT_TRIG_TIM2_CC4) || \
((INJTRIG) == SDADC_EXT_TRIG_TIM3_CC1) || \
((INJTRIG) == SDADC_EXT_TRIG_TIM3_CC2) || \
((INJTRIG) == SDADC_EXT_TRIG_TIM3_CC3) || \
((INJTRIG) == SDADC_EXT_TRIG_TIM4_CC1) || \
((INJTRIG) == SDADC_EXT_TRIG_TIM4_CC2) || \
((INJTRIG) == SDADC_EXT_TRIG_TIM4_CC3) || \
((INJTRIG) == SDADC_EXT_TRIG_TIM19_CC2) || \
((INJTRIG) == SDADC_EXT_TRIG_TIM19_CC3) || \
((INJTRIG) == SDADC_EXT_TRIG_TIM19_CC4) || \
((INJTRIG) == SDADC_EXT_TRIG_EXTI11) || \
((INJTRIG) == SDADC_EXT_TRIG_EXTI15))
/**
* @}
*/
/** @defgroup SDADC_ExtTriggerEdge SDADC External Trigger Edge
* @{
*/
#define SDADC_EXT_TRIG_RISING_EDGE SDADC_CR2_JEXTEN_0 /*!< External rising edge */
#define SDADC_EXT_TRIG_FALLING_EDGE SDADC_CR2_JEXTEN_1 /*!< External falling edge */
#define SDADC_EXT_TRIG_BOTH_EDGES SDADC_CR2_JEXTEN /*!< External rising and falling edges */
#define IS_SDADC_EXT_TRIG_EDGE(TRIGGER) (((TRIGGER) == SDADC_EXT_TRIG_RISING_EDGE) || \
((TRIGGER) == SDADC_EXT_TRIG_FALLING_EDGE) || \
((TRIGGER) == SDADC_EXT_TRIG_BOTH_EDGES))
/**
* @}
*/
/** @defgroup SDADC_InjectedDelay SDADC Injected Conversion Delay
* @{
*/
#define SDADC_INJECTED_DELAY_NONE ((uint32_t)0x00000000) /*!< No delay on injected conversion */
#define SDADC_INJECTED_DELAY SDADC_CR2_JDS /*!< Delay on injected conversion */
#define IS_SDADC_INJECTED_DELAY(DELAY) (((DELAY) == SDADC_INJECTED_DELAY_NONE) || \
((DELAY) == SDADC_INJECTED_DELAY))
/**
* @}
*/
/** @defgroup SDADC_MultimodeType SDADC Multimode Type
* @{
*/
#define SDADC_MULTIMODE_SDADC1_SDADC2 ((uint32_t)0x00000000) /*!< Get conversion values for SDADC1 and SDADC2 */
#define SDADC_MULTIMODE_SDADC1_SDADC3 ((uint32_t)0x00000001) /*!< Get conversion values for SDADC1 and SDADC3 */
#define IS_SDADC_MULTIMODE_TYPE(TYPE) (((TYPE) == SDADC_MULTIMODE_SDADC1_SDADC2) || \
((TYPE) == SDADC_MULTIMODE_SDADC1_SDADC3))
/**
* @}
*/
/** @defgroup SDADC_ErrorCode SDADC Error Code
* @{
*/
#define SDADC_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
#define SDADC_ERROR_REGULAR_OVERRUN ((uint32_t)0x00000001) /*!< Overrun occurs during regular conversion */
#define SDADC_ERROR_INJECTED_OVERRUN ((uint32_t)0x00000002) /*!< Overrun occurs during injected conversion */
#define SDADC_ERROR_DMA ((uint32_t)0x00000003) /*!< DMA error occurs */
/**
* @}
*/
/**
* @}
*/
/* Exported macros -----------------------------------------------------------*/
/** @defgroup SDADC_Exported_Macros SDADC Exported Macros
* @{
*/
/** @brief Reset SDADC handle state
* @param __HANDLE__: SDADC handle.
* @retval None
*/
#define __HAL_SDADC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SDADC_STATE_RESET)
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup SDADC_Exported_Functions SDADC Exported Functions
* @{
*/
/** @addtogroup SDADC_Exported_Functions_Group1 Initialization and de-initialization functions
* @{
*/
/* Initialization and de-initialization functions *****************************/
HAL_StatusTypeDef HAL_SDADC_Init(SDADC_HandleTypeDef *hsdadc);
HAL_StatusTypeDef HAL_SDADC_DeInit(SDADC_HandleTypeDef *hsdadc);
void HAL_SDADC_MspInit(SDADC_HandleTypeDef* hsdadc);
void HAL_SDADC_MspDeInit(SDADC_HandleTypeDef* hsdadc);
/**
* @}
*/
/** @addtogroup SDADC_Exported_Functions_Group2 peripheral control functions
* @{
*/
/* Peripheral Control functions ***********************************************/
HAL_StatusTypeDef HAL_SDADC_PrepareChannelConfig(SDADC_HandleTypeDef *hsdadc,
uint32_t ConfIndex,
SDADC_ConfParamTypeDef* ConfParamStruct);
HAL_StatusTypeDef HAL_SDADC_AssociateChannelConfig(SDADC_HandleTypeDef *hsdadc,
uint32_t Channel,
uint32_t ConfIndex);
HAL_StatusTypeDef HAL_SDADC_ConfigChannel(SDADC_HandleTypeDef *hsdadc,
uint32_t Channel,
uint32_t ContinuousMode);
HAL_StatusTypeDef HAL_SDADC_InjectedConfigChannel(SDADC_HandleTypeDef *hsdadc,
uint32_t Channel,
uint32_t ContinuousMode);
HAL_StatusTypeDef HAL_SDADC_SelectInjectedExtTrigger(SDADC_HandleTypeDef *hsdadc,
uint32_t InjectedExtTrigger,
uint32_t ExtTriggerEdge);
HAL_StatusTypeDef HAL_SDADC_SelectInjectedDelay(SDADC_HandleTypeDef *hsdadc,
uint32_t InjectedDelay);
HAL_StatusTypeDef HAL_SDADC_SelectRegularTrigger(SDADC_HandleTypeDef *hsdadc, uint32_t Trigger);
HAL_StatusTypeDef HAL_SDADC_SelectInjectedTrigger(SDADC_HandleTypeDef *hsdadc, uint32_t Trigger);
HAL_StatusTypeDef HAL_SDADC_MultiModeConfigChannel(SDADC_HandleTypeDef* hsdadc, uint32_t MultimodeType);
HAL_StatusTypeDef HAL_SDADC_InjectedMultiModeConfigChannel(SDADC_HandleTypeDef* hsdadc, uint32_t MultimodeType);
/**
* @}
*/
/** @addtogroup SDADC_Exported_Functions_Group3 Input and Output operation functions
* @{
*/
/* IO operation functions *****************************************************/
HAL_StatusTypeDef HAL_SDADC_CalibrationStart(SDADC_HandleTypeDef *hsdadc, uint32_t CalibrationSequence);
HAL_StatusTypeDef HAL_SDADC_CalibrationStart_IT(SDADC_HandleTypeDef *hsdadc, uint32_t CalibrationSequence);
HAL_StatusTypeDef HAL_SDADC_Start(SDADC_HandleTypeDef *hsdadc);
HAL_StatusTypeDef HAL_SDADC_Start_IT(SDADC_HandleTypeDef *hsdadc);
HAL_StatusTypeDef HAL_SDADC_Start_DMA(SDADC_HandleTypeDef *hsdadc, uint32_t *pData, uint32_t Length);
HAL_StatusTypeDef HAL_SDADC_Stop(SDADC_HandleTypeDef *hsdadc);
HAL_StatusTypeDef HAL_SDADC_Stop_IT(SDADC_HandleTypeDef *hsdadc);
HAL_StatusTypeDef HAL_SDADC_Stop_DMA(SDADC_HandleTypeDef *hsdadc);
HAL_StatusTypeDef HAL_SDADC_InjectedStart(SDADC_HandleTypeDef *hsdadc);
HAL_StatusTypeDef HAL_SDADC_InjectedStart_IT(SDADC_HandleTypeDef *hsdadc);
HAL_StatusTypeDef HAL_SDADC_InjectedStart_DMA(SDADC_HandleTypeDef *hsdadc, uint32_t *pData, uint32_t Length);
HAL_StatusTypeDef HAL_SDADC_InjectedStop(SDADC_HandleTypeDef *hsdadc);
HAL_StatusTypeDef HAL_SDADC_InjectedStop_IT(SDADC_HandleTypeDef *hsdadc);
HAL_StatusTypeDef HAL_SDADC_InjectedStop_DMA(SDADC_HandleTypeDef *hsdadc);
HAL_StatusTypeDef HAL_SDADC_MultiModeStart_DMA(SDADC_HandleTypeDef* hsdadc, uint32_t* pData, uint32_t Length);
HAL_StatusTypeDef HAL_SDADC_MultiModeStop_DMA(SDADC_HandleTypeDef* hsdadc);
HAL_StatusTypeDef HAL_SDADC_InjectedMultiModeStart_DMA(SDADC_HandleTypeDef* hsdadc, uint32_t* pData, uint32_t Length);
HAL_StatusTypeDef HAL_SDADC_InjectedMultiModeStop_DMA(SDADC_HandleTypeDef* hsdadc);
uint32_t HAL_SDADC_GetValue(SDADC_HandleTypeDef *hsdadc);
uint32_t HAL_SDADC_InjectedGetValue(SDADC_HandleTypeDef *hsdadc, uint32_t* Channel);
uint32_t HAL_SDADC_MultiModeGetValue(SDADC_HandleTypeDef* hsdadc);
uint32_t HAL_SDADC_InjectedMultiModeGetValue(SDADC_HandleTypeDef* hsdadc);
void HAL_SDADC_IRQHandler(SDADC_HandleTypeDef* hsdadc);
HAL_StatusTypeDef HAL_SDADC_PollForCalibEvent(SDADC_HandleTypeDef* hsdadc, uint32_t Timeout);
HAL_StatusTypeDef HAL_SDADC_PollForConversion(SDADC_HandleTypeDef* hsdadc, uint32_t Timeout);
HAL_StatusTypeDef HAL_SDADC_PollForInjectedConversion(SDADC_HandleTypeDef* hsdadc, uint32_t Timeout);
void HAL_SDADC_CalibrationCpltCallback(SDADC_HandleTypeDef* hsdadc);
void HAL_SDADC_ConvHalfCpltCallback(SDADC_HandleTypeDef* hsdadc);
void HAL_SDADC_ConvCpltCallback(SDADC_HandleTypeDef* hsdadc);
void HAL_SDADC_InjectedConvHalfCpltCallback(SDADC_HandleTypeDef* hsdadc);
void HAL_SDADC_InjectedConvCpltCallback(SDADC_HandleTypeDef* hsdadc);
void HAL_SDADC_ErrorCallback(SDADC_HandleTypeDef* hsdadc);
/**
* @}
*/
/** @defgroup SDADC_Exported_Functions_Group4 Peripheral State functions
* @{
*/
/* Peripheral State and Error functions ***************************************/
HAL_SDADC_StateTypeDef HAL_SDADC_GetState(SDADC_HandleTypeDef* hsdadc);
uint32_t HAL_SDADC_GetError(SDADC_HandleTypeDef* hsdadc);
/* Private functions ---------------------------------------------------------*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#endif /* defined(STM32F373xC) || defined(STM32F378xx) */
#ifdef __cplusplus
}
#endif
#endif /*__STM32F3xx_SDADC_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/