my fork
Fork of mbed by
TARGET_NUCLEO_F302R8/stm32f3xx_hal_pcd_ex.h
- Committer:
- Kojto
- Date:
- 2014-10-28
- Revision:
- 90:cb3d968589d8
File content as of revision 90:cb3d968589d8:
/** ****************************************************************************** * @file stm32f3xx_hal_pcd_ex.h * @author MCD Application Team * @version V1.1.0 * @date 12-Sept-2014 * @brief Header file of PCD HAL Extended module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F3xx_HAL_PCD_EX_H #define __STM32F3xx_HAL_PCD_EX_H #ifdef __cplusplus extern "C" { #endif #if defined(STM32F302xE) || defined(STM32F303xE) || \ defined(STM32F302xC) || defined(STM32F303xC) || \ defined(STM32F302x8) || \ defined(STM32F373xC) /* Includes ------------------------------------------------------------------*/ #include "stm32f3xx_hal_def.h" /** @addtogroup STM32F3xx_HAL_Driver * @{ */ /** @addtogroup PCDEx * @{ */ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ /* Exported macros -----------------------------------------------------------*/ /** @defgroup PCDEx_Exported_Macros PCD Extended Exported Macros * @{ */ /** * @brief Gets address in an endpoint register. * @param USBx: USB peripheral instance register address. * @param bEpNum: Endpoint Number. * @retval None */ #if defined(STM32F302xC) || defined(STM32F303xC) || \ defined(STM32F373xC) #define PCD_EP_TX_ADDRESS(USBx, bEpNum) ((uint32_t *)((USBx->BTABLE+bEpNum*8)*2+ ((uint32_t)USBx + 0x400))) #define PCD_EP_TX_CNT(USBx, bEpNum) ((uint32_t *)((USBx->BTABLE+bEpNum*8+2)*2+ ((uint32_t)USBx + 0x400))) #define PCD_EP_RX_ADDRESS(USBx, bEpNum) ((uint32_t *)((USBx->BTABLE+bEpNum*8+4)*2+ ((uint32_t)USBx + 0x400))) #define PCD_EP_RX_CNT(USBx, bEpNum) ((uint32_t *)((USBx->BTABLE+bEpNum*8+6)*2+ ((uint32_t)USBx + 0x400))) #define PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount) {\ uint32_t *pdwReg = PCD_EP_RX_CNT(USBx, bEpNum); \ PCD_SET_EP_CNT_RX_REG(pdwReg, wCount);\ } #endif /* STM32F302xC || STM32F303xC || */ /* STM32F373xC */ #if defined(STM32F302xE) || defined(STM32F303xE) || \ defined(STM32F302x8) #define PCD_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t *)((USBx->BTABLE+bEpNum*8)+ ((uint32_t)USBx + 0x400))) #define PCD_EP_TX_CNT(USBx, bEpNum) ((uint16_t *)((USBx->BTABLE+bEpNum*8+2)+ ((uint32_t)USBx + 0x400))) #define PCD_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t *)((USBx->BTABLE+bEpNum*8+4)+ ((uint32_t)USBx + 0x400))) #define PCD_EP_RX_CNT(USBx, bEpNum) ((uint16_t *)((USBx->BTABLE+bEpNum*8+6)+ ((uint32_t)USBx + 0x400))) #define PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount) {\ uint16_t *pdwReg = PCD_EP_RX_CNT(USBx, bEpNum); \ PCD_SET_EP_CNT_RX_REG(pdwReg, wCount);\ } #endif /* STM32F302xE || STM32F303xE || */ /* STM32F302x8 */ /** * @} */ /* Exported functions --------------------------------------------------------*/ /** @addtogroup PCDEx_Exported_Functions PCD Extended Exported Functions * @{ */ /** @addtogroup PCDEx_Exported_Functions_Group1 Extended Initialization and de-initialization functions * @brief Initialization and Configuration functions * @{ */ HAL_StatusTypeDef HAL_PCDEx_PMAConfig(PCD_HandleTypeDef *hpcd, uint16_t ep_addr, uint16_t ep_kind, uint32_t pmaadress); __weak void HAL_PCDEx_SetConnectionState(PCD_HandleTypeDef *hpcd, uint8_t state); /** * @} */ /** * @} */ /** * @} */ /** * @} */ #endif /* STM32F302xE || STM32F303xE || */ /* STM32F302xC || STM32F303xC || */ /* STM32F302x8 || */ /* STM32F373xC */ #ifdef __cplusplus } #endif #endif /* __STM32F3xx_HAL_PCD_EX_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/