Filippo Casamassima
my fork
Fork of
mbed
by 
mbed official
TARGET_NUCLEO_F030R8/stm32f0xx_hal_spi.h
- Committer:
- Kojto
- Date:
- 2014-10-28
- Revision:
- 90:cb3d968589d8
- Child:
- 93:e188a91d3eaa
File content as of revision 90:cb3d968589d8:
/**
******************************************************************************
* @file stm32f0xx_hal_spi.h
* @author MCD Application Team
* @version V1.1.0
* @date 03-Oct-2014
* @brief Header file of SPI HAL module.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F0xx_HAL_SPI_H
#define __STM32F0xx_HAL_SPI_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f0xx_hal_def.h"
/** @addtogroup STM32F0xx_HAL_Driver
* @{
*/
/** @addtogroup SPI
* @{
*/
/* Exported types ------------------------------------------------------------*/
/** @defgroup SPI_Exported_Types SPI Exported Types
* @{
*/
/**
* @brief SPI Configuration Structure definition
*/
typedef struct
{
uint32_t Mode; /*!< Specifies the SPI operating mode.
This parameter can be a value of @ref SPI_mode */
uint32_t Direction; /*!< Specifies the SPI bidirectional mode state.
This parameter can be a value of @ref SPI_Direction */
uint32_t DataSize; /*!< Specifies the SPI data size.
This parameter can be a value of @ref SPI_data_size */
uint32_t CLKPolarity; /*!< Specifies the serial clock steady state.
This parameter can be a value of @ref SPI_Clock_Polarity */
uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture.
This parameter can be a value of @ref SPI_Clock_Phase */
uint32_t NSS; /*!< Specifies whether the NSS signal is managed by
hardware (NSS pin) or by software using the SSI bit.
This parameter can be a value of @ref SPI_Slave_Select_management */
uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be
used to configure the transmit and receive SCK clock.
This parameter can be a value of @ref SPI_BaudRate_Prescaler
@note The communication clock is derived from the master
clock. The slave clock does not need to be set. */
uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
This parameter can be a value of @ref SPI_MSB_LSB_transmission */
uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not .
This parameter can be a value of @ref SPI_TI_mode */
uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not.
This parameter can be a value of @ref SPI_CRC_Calculation */
uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation.
This parameter must be a number between Min_Data = 0 and Max_Data = 65535 */
uint32_t CRCLength; /*!< Specifies the CRC Length used for the CRC calculation.
CRC Length is only used with Data8 and Data16, not other data size
This parameter must 0 or 1 or 2*/
uint32_t NSSPMode; /*!< Specifies whether the NSSP signal is enabled or not .
This mode is activated by the NSSP bit in the SPIx_CR2 register and
it takes effect only if the SPI interface is configured as Motorola SPI
master (FRF=0) with capture on the first edge (SPIx_CR1 CPHA = 0,
CPOL setting is ignored).. */
} SPI_InitTypeDef;
/**
* @brief HAL State structures definition
*/
typedef enum
{
HAL_SPI_STATE_RESET = 0x00, /*!< Peripheral not Initialized */
HAL_SPI_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
HAL_SPI_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
HAL_SPI_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */
HAL_SPI_STATE_BUSY_RX = 0x04, /*!< Data Reception process is ongoing */
HAL_SPI_STATE_BUSY_TX_RX = 0x05, /*!< Data Transmission and Reception process is ongoing */
HAL_SPI_STATE_TIMEOUT = 0x06, /*!< Timeout state */
HAL_SPI_STATE_ERROR = 0x07 /*!< Data Transmission and Reception process is ongoing */
}HAL_SPI_StateTypeDef;
/**
* @brief HAL SPI Error Code structure definition
*/
typedef enum
{
HAL_SPI_ERROR_NONE = 0x00, /*!< No error */
HAL_SPI_ERROR_MODF = 0x01, /*!< MODF error */
HAL_SPI_ERROR_CRC = 0x02, /*!< CRC error */
HAL_SPI_ERROR_OVR = 0x04, /*!< OVR error */
HAL_SPI_ERROR_FRE = 0x08, /*!< FRE error */
HAL_SPI_ERROR_DMA = 0x10, /*!< DMA transfer error */
HAL_SPI_ERROR_FLAG = 0x20, /*!< Error on BSY/TXE/FTLVL/FRLVL Flag */
HAL_SPI_ERROR_UNKNOW = 0x40, /*!< Unknow Error error */
}HAL_SPI_ErrorTypeDef;
/**
* @brief SPI handle Structure definition
*/
typedef struct __SPI_HandleTypeDef
{
SPI_TypeDef *Instance; /* SPI registers base address */
SPI_InitTypeDef Init; /* SPI communication parameters */
uint8_t *pTxBuffPtr; /* Pointer to SPI Tx transfer Buffer */
uint16_t TxXferSize; /* SPI Tx Transfer size */
uint16_t TxXferCount; /* SPI Tx Transfer Counter */
uint8_t *pRxBuffPtr; /* Pointer to SPI Rx transfer Buffer */
uint16_t RxXferSize; /* SPI Rx Transfer size */
uint16_t RxXferCount; /* SPI Rx Transfer Counter */
uint32_t CRCSize; /* SPI CRC size used for the transfer */
void (*RxISR)(struct __SPI_HandleTypeDef *hspi); /* function pointer on Rx IRQ handler */
void (*TxISR)(struct __SPI_HandleTypeDef *hspi); /* function pointer on Tx IRQ handler */
DMA_HandleTypeDef *hdmatx; /* SPI Tx DMA Handle parameters */
DMA_HandleTypeDef *hdmarx; /* SPI Rx DMA Handle parameters */
HAL_LockTypeDef Lock; /* Locking object */
HAL_SPI_StateTypeDef State; /* SPI communication state */
HAL_SPI_ErrorTypeDef ErrorCode; /* SPI Error code */
}SPI_HandleTypeDef;
/**
* @}
*/
/* Exported constants --------------------------------------------------------*/
/** @defgroup SPI_Exported_Constants SPI Exported Constants
* @{
*/
/** @defgroup SPI_mode SPI mode
* @{
*/
#define SPI_MODE_SLAVE ((uint32_t)0x00000000)
#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI)
#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \
((MODE) == SPI_MODE_MASTER))
/**
* @}
*/
/** @defgroup SPI_Direction SPI Direction
* @{
*/
#define SPI_DIRECTION_2LINES ((uint32_t)0x00000000)
#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY
#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE
#define IS_SPI_DIRECTION(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \
((MODE) == SPI_DIRECTION_2LINES_RXONLY) ||\
((MODE) == SPI_DIRECTION_1LINE))
#define IS_SPI_DIRECTION_2LINES(MODE) ((MODE) == SPI_DIRECTION_2LINES)
#define IS_SPI_DIRECTION_2LINES_OR_1LINE(MODE) (((MODE) == SPI_DIRECTION_2LINES)|| \
((MODE) == SPI_DIRECTION_1LINE))
/**
* @}
*/
/** @defgroup SPI_data_size SPI data size
* @{
*/
#define SPI_DATASIZE_4BIT ((uint16_t)0x0300)
#define SPI_DATASIZE_5BIT ((uint16_t)0x0400)
#define SPI_DATASIZE_6BIT ((uint16_t)0x0500)
#define SPI_DATASIZE_7BIT ((uint16_t)0x0600)
#define SPI_DATASIZE_8BIT ((uint16_t)0x0700)
#define SPI_DATASIZE_9BIT ((uint16_t)0x0800)
#define SPI_DATASIZE_10BIT ((uint16_t)0x0900)
#define SPI_DATASIZE_11BIT ((uint16_t)0x0A00)
#define SPI_DATASIZE_12BIT ((uint16_t)0x0B00)
#define SPI_DATASIZE_13BIT ((uint16_t)0x0C00)
#define SPI_DATASIZE_14BIT ((uint16_t)0x0D00)
#define SPI_DATASIZE_15BIT ((uint16_t)0x0E00)
#define SPI_DATASIZE_16BIT ((uint16_t)0x0F00)
#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \
((DATASIZE) == SPI_DATASIZE_15BIT) || \
((DATASIZE) == SPI_DATASIZE_14BIT) || \
((DATASIZE) == SPI_DATASIZE_13BIT) || \
((DATASIZE) == SPI_DATASIZE_12BIT) || \
((DATASIZE) == SPI_DATASIZE_11BIT) || \
((DATASIZE) == SPI_DATASIZE_10BIT) || \
((DATASIZE) == SPI_DATASIZE_9BIT) || \
((DATASIZE) == SPI_DATASIZE_8BIT) || \
((DATASIZE) == SPI_DATASIZE_7BIT) || \
((DATASIZE) == SPI_DATASIZE_6BIT) || \
((DATASIZE) == SPI_DATASIZE_5BIT) || \
((DATASIZE) == SPI_DATASIZE_4BIT))
/**
* @}
*/
/** @defgroup SPI_Clock_Polarity SPI Clock Polarity
* @{
*/
#define SPI_POLARITY_LOW ((uint32_t)0x00000000)
#define SPI_POLARITY_HIGH SPI_CR1_CPOL
#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \
((CPOL) == SPI_POLARITY_HIGH))
/**
* @}
*/
/** @defgroup SPI_Clock_Phase SPI Clock Phase
* @{
*/
#define SPI_PHASE_1EDGE ((uint32_t)0x00000000)
#define SPI_PHASE_2EDGE SPI_CR1_CPHA
#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \
((CPHA) == SPI_PHASE_2EDGE))
/**
* @}
*/
/** @defgroup SPI_Slave_Select_management SPI Slave Select management
* @{
*/
#define SPI_NSS_SOFT SPI_CR1_SSM
#define SPI_NSS_HARD_INPUT ((uint32_t)0x00000000)
#define SPI_NSS_HARD_OUTPUT ((uint32_t)0x00040000)
#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT) || \
((NSS) == SPI_NSS_HARD_INPUT) || \
((NSS) == SPI_NSS_HARD_OUTPUT))
/**
* @}
*/
/** @defgroup SPI_NSS_pulse_management SPI NSS pulse management
* @{
*/
#define SPI_NSS_PULSE_ENABLED SPI_CR2_NSSP
#define SPI_NSS_PULSE_DISABLED ((uint32_t)0x00000000)
#define IS_SPI_NSSP(NSSP) (((NSSP) == SPI_NSS_PULSE_ENABLED) || \
((NSSP) == SPI_NSS_PULSE_DISABLED))
/**
* @}
*/
/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler
* @{
*/
#define SPI_BAUDRATEPRESCALER_2 ((uint32_t)0x00000000)
#define SPI_BAUDRATEPRESCALER_4 ((uint32_t)0x00000008)
#define SPI_BAUDRATEPRESCALER_8 ((uint32_t)0x00000010)
#define SPI_BAUDRATEPRESCALER_16 ((uint32_t)0x00000018)
#define SPI_BAUDRATEPRESCALER_32 ((uint32_t)0x00000020)
#define SPI_BAUDRATEPRESCALER_64 ((uint32_t)0x00000028)
#define SPI_BAUDRATEPRESCALER_128 ((uint32_t)0x00000030)
#define SPI_BAUDRATEPRESCALER_256 ((uint32_t)0x00000038)
#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BAUDRATEPRESCALER_2) || \
((PRESCALER) == SPI_BAUDRATEPRESCALER_4) || \
((PRESCALER) == SPI_BAUDRATEPRESCALER_8) || \
((PRESCALER) == SPI_BAUDRATEPRESCALER_16) || \
((PRESCALER) == SPI_BAUDRATEPRESCALER_32) || \
((PRESCALER) == SPI_BAUDRATEPRESCALER_64) || \
((PRESCALER) == SPI_BAUDRATEPRESCALER_128) || \
((PRESCALER) == SPI_BAUDRATEPRESCALER_256))
/**
* @}
*/
/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB transmission
* @{
*/
#define SPI_FIRSTBIT_MSB ((uint32_t)0x00000000)
#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST
#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \
((BIT) == SPI_FIRSTBIT_LSB))
/**
* @}
*/
/** @defgroup SPI_TI_mode SPI TI mode
* @{
*/
#define SPI_TIMODE_DISABLED ((uint32_t)0x00000000)
#define SPI_TIMODE_ENABLED SPI_CR2_FRF
#define IS_SPI_TIMODE(MODE) (((MODE) == SPI_TIMODE_DISABLED) || \
((MODE) == SPI_TIMODE_ENABLED))
/**
* @}
*/
/** @defgroup SPI_CRC_Calculation SPI CRC Calculation
* @{
*/
#define SPI_CRCCALCULATION_DISABLED ((uint32_t)0x00000000)
#define SPI_CRCCALCULATION_ENABLED SPI_CR1_CRCEN
#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLED) || \
((CALCULATION) == SPI_CRCCALCULATION_ENABLED))
/**
* @}
*/
/** @defgroup SPI_CRC_length SPI CRC length
* @{
* This parameter can be one of the following values:
* SPI_CRC_LENGTH_DATASIZE: aligned with the data size
* SPI_CRC_LENGTH_8BIT : CRC 8bit
* SPI_CRC_LENGTH_16BIT : CRC 16bit
*/
#define SPI_CRC_LENGTH_DATASIZE 0
#define SPI_CRC_LENGTH_8BIT 1
#define SPI_CRC_LENGTH_16BIT 2
#define IS_SPI_CRC_LENGTH(LENGTH) (((LENGTH) == SPI_CRC_LENGTH_DATASIZE) ||\
((LENGTH) == SPI_CRC_LENGTH_8BIT) || \
((LENGTH) == SPI_CRC_LENGTH_16BIT))
/**
* @}
*/
/** @defgroup SPI_FIFO_reception_threshold SPI FIFO reception threshold
* @{
* This parameter can be one of the following values:
* SPI_RxFIFOThreshold_HF: RXNE event is generated if the FIFO
* level is greater or equal to 1/2(16-bits).
* SPI_RxFIFOThreshold_QF: RXNE event is generated if the FIFO
* level is greater or equal to 1/4(8 bits).
*/
#define SPI_RXFIFO_THRESHOLD SPI_CR2_FRXTH
#define SPI_RXFIFO_THRESHOLD_QF SPI_CR2_FRXTH
#define SPI_RXFIFO_THRESHOLD_HF ((uint32_t)0x0)
/**
* @}
*/
/** @defgroup SPI_Interrupt_configuration_definition SPI Interrupt configuration definition
* @brief SPI Interrupt definition
* Elements values convention: 0xXXXXXXXX
* - XXXXXXXX : Interrupt control mask
* @{
*/
#define SPI_IT_TXE SPI_CR2_TXEIE
#define SPI_IT_RXNE SPI_CR2_RXNEIE
#define SPI_IT_ERR SPI_CR2_ERRIE
/**
* @}
*/
/** @defgroup SPI_Flag_definition SPI Flag definition
* @brief Flag definition
* Elements values convention: 0xXXXXYYYY
* - XXXX : Flag register Index
* - YYYY : Flag mask
* @{
*/
#define SPI_FLAG_RXNE SPI_SR_RXNE /* SPI status flag: Rx buffer not empty flag */
#define SPI_FLAG_TXE SPI_SR_TXE /* SPI status flag: Tx buffer empty flag */
#define SPI_FLAG_BSY SPI_SR_BSY /* SPI status flag: Busy flag */
#define SPI_FLAG_CRCERR SPI_SR_CRCERR /* SPI Error flag: CRC error flag */
#define SPI_FLAG_MODF SPI_SR_MODF /* SPI Error flag: Mode fault flag */
#define SPI_FLAG_OVR SPI_SR_OVR /* SPI Error flag: Overrun flag */
#define SPI_FLAG_FRE SPI_SR_FRE /* SPI Error flag: TI mode frame format error flag */
#define SPI_FLAG_FTLVL SPI_SR_FTLVL /* SPI fifo transmission level */
#define SPI_FLAG_FRLVL SPI_SR_FRLVL /* SPI fifo reception level */
/**
* @}
*/
/** @defgroup SPI_transmission_fifo_status_level SPI transmission fifo status level
* @{
*/
#define SPI_FTLVL_EMPTY ((uint16_t)0x0000)
#define SPI_FTLVL_QUARTER_FULL ((uint16_t)0x0800)
#define SPI_FTLVL_HALF_FULL ((uint16_t)0x1000)
#define SPI_FTLVL_FULL ((uint16_t)0x1800)
/**
* @}
*/
/** @defgroup SPI_reception_fifo_status_level SPI reception fifo status level
* @{
*/
#define SPI_FRLVL_EMPTY ((uint16_t)0x0000)
#define SPI_FRLVL_QUARTER_FULL ((uint16_t)0x0200)
#define SPI_FRLVL_HALF_FULL ((uint16_t)0x0400)
#define SPI_FRLVL_FULL ((uint16_t)0x0600)
/**
* @}
*/
/**
* @}
*/
/* Exported macros ------------------------------------------------------------*/
/** @defgroup SPI_Exported_Macros SPI Exported Macros
* @{
*/
/** @brief Reset SPI handle state
* @param __HANDLE__: SPI handle.
* @retval None
*/
#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
/** @brief Enables or disables the specified SPI interrupts.
* @param __HANDLE__: specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @param __INTERRUPT__: specifies the interrupt source to enable or disable.
* This parameter can be one of the following values:
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
* @arg SPI_IT_ERR: Error interrupt enable
* @retval None
*/
#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__))
#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (uint16_t)(~(__INTERRUPT__)))
/** @brief Checks if the specified SPI interrupt source is enabled or disabled.
* @param __HANDLE__: specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @param __INTERRUPT__: specifies the SPI interrupt source to check.
* This parameter can be one of the following values:
* @arg SPI_IT_TXE: Tx buffer empty interrupt enable
* @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
* @arg SPI_IT_ERR: Error interrupt enable
* @retval The new state of __IT__ (TRUE or FALSE).
*/
#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
/** @brief Checks whether the specified SPI flag is set or not.
* @param __HANDLE__: specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @param __FLAG__: specifies the flag to check.
* This parameter can be one of the following values:
* @arg SPI_FLAG_RXNE: Receive buffer not empty flag
* @arg SPI_FLAG_TXE: Transmit buffer empty flag
* @arg SPI_FLAG_CRCERR: CRC error flag
* @arg SPI_FLAG_MODF: Mode fault flag
* @arg SPI_FLAG_OVR: Overrun flag
* @arg SPI_FLAG_BSY: Busy flag
* @arg SPI_FLAG_FRE: Frame format error flag
* @retval The new state of __FLAG__ (TRUE or FALSE).
*/
#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
/** @brief Clears the SPI CRCERR pending flag.
* @param __HANDLE__: specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = (uint16_t)(~SPI_FLAG_CRCERR))
/** @brief Clears the SPI MODF pending flag.
* @param __HANDLE__: specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
*
* @retval None
*/
#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR;\
(__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_SPE);}while(0)
/** @brief Clears the SPI OVR pending flag.
* @param __HANDLE__: specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
*
* @retval None
*/
#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) do{(__HANDLE__)->Instance->DR;\
(__HANDLE__)->Instance->SR;}while(0)
/** @brief Clears the SPI FRE pending flag.
* @param __HANDLE__: specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
*
* @retval None
*/
#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR)
/** @brief Enables the SPI.
* @param __HANDLE__: specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define __HAL_SPI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_SPE)
/** @brief Disables the SPI.
* @param __HANDLE__: specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_SPE))
/** @brief Sets the SPI transmit-only mode.
* @param __HANDLE__: specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define __HAL_SPI_1LINE_TX(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_BIDIOE)
/** @brief Sets the SPI receive-only mode.
* @param __HANDLE__: specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define __HAL_SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_BIDIOE))
/** @brief Resets the CRC calculation of the SPI.
* @param __HANDLE__: specifies the SPI Handle.
* This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
* @retval None
*/
#define __HAL_SPI_RESET_CRC(__HANDLE__) do{(__HANDLE__)->Instance->CR1 &= (uint16_t)(~SPI_CR1_CRCEN);\
(__HANDLE__)->Instance->CR1 |= SPI_CR1_CRCEN;}while(0)
#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) (((POLYNOMIAL) >= 0x1) && ((POLYNOMIAL) <= 0xFFFF))
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/** @addtogroup SPI_Exported_Functions
* @{
*/
/** @addtogroup SPI_Exported_Functions_Group1
* @{
*/
/* Initialization and de-initialization functions ****************************/
HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi);
HAL_StatusTypeDef HAL_SPI_InitExtended(SPI_HandleTypeDef *hspi);
HAL_StatusTypeDef HAL_SPI_DeInit (SPI_HandleTypeDef *hspi);
void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi);
void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi);
/**
* @}
*/
/** @addtogroup SPI_Exported_Functions_Group2
* @{
*/
/* IO operation functions *****************************************************/
HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
/**
* @}
*/
/** @addtogroup SPI_Exported_Functions_Group3
* @{
*/
/* Peripheral State and Error functions ***************************************/
HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F0xx_HAL_SPI_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/