my fork
Fork of mbed by
TARGET_NUCLEO_F072RB/stm32f0xx_hal_pwr_ex.h
- Committer:
- bogdanm
- Date:
- 2014-06-11
- Revision:
- 85:024bf7f99721
- Child:
- 92:4fc01daae5a5
File content as of revision 85:024bf7f99721:
/** ****************************************************************************** * @file stm32f0xx_hal_pwr_ex.h * @author MCD Application Team * @version V1.0.0 * @date 28-May-2014 * @brief Header file of PWR HAL Extension module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32F0xx_HAL_PWR_EX_H #define __STM32F0xx_HAL_PWR_EX_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32f0xx_hal_def.h" /** @addtogroup STM32F0xx_HAL_Driver * @{ */ /** @addtogroup PWREx * @{ */ /* Exported types ------------------------------------------------------------*/ #if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ defined (STM32F071xB) || defined (STM32F072xB) /** * @brief PWR PVD configuration structure definition */ typedef struct { uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level This parameter can be a value of @ref PWREx_PVD_detection_level */ uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. This parameter can be a value of @ref PWREx_PVD_Mode */ }PWR_PVDTypeDef; #endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ /* defined (STM32F071xB) || defined (STM32F072xB) */ /* Exported constants --------------------------------------------------------*/ /** @defgroup PWREx_Exported_Constants * @{ */ /** @defgroup PWREx_WakeUp_Pins * @{ */ #if defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) #define PWR_WAKEUP_PIN1 ((uint32_t)0x00) #define PWR_WAKEUP_PIN2 ((uint32_t)0x01) #define PWR_WAKEUP_PIN3 ((uint32_t)0x02) #define PWR_WAKEUP_PIN4 ((uint32_t)0x03) #define PWR_WAKEUP_PIN5 ((uint32_t)0x04) #define PWR_WAKEUP_PIN6 ((uint32_t)0x05) #define PWR_WAKEUP_PIN7 ((uint32_t)0x06) #define PWR_WAKEUP_PIN8 ((uint32_t)0x07) #define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \ ((PIN) == PWR_WAKEUP_PIN2) || \ ((PIN) == PWR_WAKEUP_PIN3) || \ ((PIN) == PWR_WAKEUP_PIN4) || \ ((PIN) == PWR_WAKEUP_PIN5) || \ ((PIN) == PWR_WAKEUP_PIN6) || \ ((PIN) == PWR_WAKEUP_PIN7) || \ ((PIN) == PWR_WAKEUP_PIN8)) #else #define PWR_WAKEUP_PIN1 ((uint32_t)0x00) #define PWR_WAKEUP_PIN2 ((uint32_t)0x01) #define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || \ ((PIN) == PWR_WAKEUP_PIN2)) #endif /* defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) */ /** * @} */ #if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ defined (STM32F071xB) || defined (STM32F072xB) #define PWR_EXTI_LINE_PVD ((uint32_t)0x00010000) /*!< External interrupt line 16 Connected to the PVD EXTI Line */ /** @defgroup PWREx_PVD_detection_level * @{ */ #define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0 #define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1 #define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2 #define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3 #define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4 #define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5 #define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6 #define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7 #define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) /** * @} */ /** @defgroup PWREx_PVD_Mode * @{ */ #define PWR_MODE_EVT ((uint32_t)0x00000000) /*!< No Interrupt */ #define PWR_MODE_IT_RISING ((uint32_t)0x00000001) /*!< External Interrupt Mode with Rising edge trigger detection */ #define PWR_MODE_IT_FALLING ((uint32_t)0x00000002) /*!< External Interrupt Mode with Falling edge trigger detection */ #define PWR_MODE_IT_RISING_FALLING ((uint32_t)0x00000003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ #define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_MODE_EVT) || ((MODE) == PWR_MODE_IT_RISING)|| \ ((MODE) == PWR_MODE_IT_FALLING) || ((MODE) == PWR_MODE_IT_RISING_FALLING)) /** * @} */ #endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ /* defined (STM32F071xB) || defined (STM32F072xB) */ /** @defgroup PWREx_Flag * @{ */ #if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ defined (STM32F071xB) || defined (STM32F072xB) #define PWR_FLAG_WU PWR_CSR_WUF #define PWR_FLAG_SB PWR_CSR_SBF #define PWR_FLAG_PVDO PWR_CSR_PVDO #define PWR_FLAG_VREFINTRDY PWR_CSR_VREFINTRDYF #define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB) || \ ((FLAG) == PWR_FLAG_PVDO) || ((FLAG) == PWR_FLAG_VREFINTRDY)) #else #define PWR_FLAG_WU PWR_CSR_WUF #define PWR_FLAG_SB PWR_CSR_SBF #define IS_PWR_GET_FLAG(FLAG) (((FLAG) == PWR_FLAG_WU) || ((FLAG) == PWR_FLAG_SB)) #endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ /* defined (STM32F071xB) || defined (STM32F072xB) */ /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /** @defgroup PWREx_Exported_Macros * @{ */ #if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ defined (STM32F071xB) || defined (STM32F072xB) /** * @brief Enable the PVD Exti Line. * @param __EXTILINE__: specifies the PVD EXTI sources to be enabled. * This parameter can be: * @arg PWR_EXTI_LINE_PVD * @retval None. */ #define __HAL_PVD_EXTI_ENABLE_IT(__EXTILINE__) (EXTI->IMR |= (__EXTILINE__)) /** * @brief Disable the PVD EXTI Line. * @param __EXTILINE__: specifies the PVD EXTI sources to be disabled. * This parameter can be: * @arg PWR_EXTI_LINE_PVD * @retval None. */ #define __HAL_PVD_EXTI_DISABLE_IT(__EXTILINE__) (EXTI->IMR &= ~(__EXTILINE__)) /** * @brief Generate a Software interrupt on selected EXTI line. * @param __EXTILINE__: specifies the PVD EXTI sources to be disabled. * This parameter can be: * @arg PWR_EXTI_LINE_PVD * @retval None */ #define __HAL_PVD_EXTI_GENERATE_SWIT(__EXTILINE__) (EXTI->SWIER |= (__EXTILINE__)) /** * @brief Check whether the specified PVD EXTI interrupt flag is set or not. * @param __EXTILINE__: specifies the PVD EXTI sources to be cleared. * This parameter can be: * @arg PWR_EXTI_LINE_PVD * @retval EXTI PVD Line Status. */ #define __HAL_PVD_EXTI_GET_FLAG(__EXTILINE__) (EXTI->PR & (__EXTILINE__)) /** * @brief Clear the PVD EXTI flag. * @param __EXTILINE__: specifies the PVD EXTI sources to be cleared. * This parameter can be: * @arg PWR_EXTI_LINE_PVD * @retval None. */ #define __HAL_PVD_EXTI_CLEAR_FLAG(__EXTILINE__) (EXTI->PR = (__EXTILINE__)) #endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ /* defined (STM32F071xB) || defined (STM32F072xB) */ /** * @} */ /* Exported functions --------------------------------------------------------*/ /* I/O operation functions ***************************************************/ #if defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || \ defined (STM32F071xB) || defined (STM32F072xB) void HAL_PWR_PVD_IRQHandler(void); void HAL_PWR_PVDCallback(void); /* Peripheral Control functions **********************************************/ void HAL_PWR_PVDConfig(PWR_PVDTypeDef *sConfigPVD); void HAL_PWR_EnablePVD(void); void HAL_PWR_DisablePVD(void); #endif /* defined (STM32F031x6) || defined (STM32F042x6) || defined (STM32F051x8) || */ /* defined (STM32F071xB) || defined (STM32F072xB) */ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32F0xx_HAL_PWR_EX_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/