Filippo Casamassima
my fork
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F072RB/stm32f0xx_hal_rcc.h
- Revision:
- 92:4fc01daae5a5
- Parent:
- 85:024bf7f99721
- Child:
- 93:e188a91d3eaa
--- a/TARGET_NUCLEO_F072RB/stm32f0xx_hal_rcc.h Wed Oct 29 11:02:04 2014 +0000
+++ b/TARGET_NUCLEO_F072RB/stm32f0xx_hal_rcc.h Thu Nov 27 13:33:22 2014 +0000
@@ -2,8 +2,8 @@
******************************************************************************
* @file stm32f0xx_hal_rcc.h
* @author MCD Application Team
- * @version V1.0.0
- * @date 28-May-2014
+ * @version V1.1.0
+ * @date 03-Oct-2014
* @brief Header file of RCC HAL module.
******************************************************************************
* @attention
@@ -56,6 +56,10 @@
/* Exported types ------------------------------------------------------------*/
+/** @defgroup RCC_Exported_Types RCC Exported Types
+ * @{
+ */
+
/**
* @brief RCC PLL configuration structure definition
*/
@@ -130,11 +134,19 @@
}RCC_ClkInitTypeDef;
+/**
+ * @}
+ */
+
/* Exported constants --------------------------------------------------------*/
-/** @defgroup RCC_Exported_Constants
+/** @defgroup RCC_Exported_Constants RCC Exported Constants
* @{
*/
+/** @defgroup RCC_BitAddress_AliasRegion RCC BitAddress AliasRegion
+ * @brief RCC registers bit address in the alias region
+ * @{
+ */
#define RCC_OFFSET (RCC_BASE - PERIPH_BASE)
/* --- CR Register ---*/
#define RCC_CR_OFFSET (RCC_OFFSET + 0x00)
@@ -164,16 +176,26 @@
/* BDCR register byte 0 (Bits[7:0] base address */
#define RCC_BDCR_BYTE0_ADDRESS (PERIPH_BASE + RCC_BDCR_OFFSET)
+#define RCC_CFGR_PLLMUL_BITNUMBER 18
+#define RCC_CFGR2_PREDIV_BITNUMBER 0
+
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Timeout RCC Timeout
+ * @{
+ */
/* LSE state change timeout */
#define LSE_TIMEOUT_VALUE ((uint32_t)5000) /* 5 s */
/* Disable Backup domain write protection state change timeout */
#define DBP_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
-
-#define RCC_CFGR_PLLMUL_BITNUMBER 18
-#define RCC_CFGR2_PREDIV_BITNUMBER 0
-
-/** @defgroup RCC_Oscillator_Type
+/**
+ * @}
+ */
+
+/** @defgroup RCC_Oscillator_Type RCC Oscillator Type
* @{
*/
#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000)
@@ -195,7 +217,7 @@
* @}
*/
-/** @defgroup RCC_HSE_Config
+/** @defgroup RCC_HSE_Config RCC HSE Config
* @{
*/
#define RCC_HSE_OFF ((uint8_t)0x00)
@@ -208,7 +230,7 @@
* @}
*/
-/** @defgroup RCC_LSE_Config
+/** @defgroup RCC_LSE_Config RCC_LSE_Config
* @{
*/
#define RCC_LSE_OFF ((uint8_t)0x00)
@@ -221,7 +243,7 @@
* @}
*/
-/** @defgroup RCC_HSI_Config
+/** @defgroup RCC_HSI_Config RCC HSI Config
* @{
*/
#define RCC_HSI_OFF ((uint8_t)0x00)
@@ -234,7 +256,7 @@
* @}
*/
-/** @defgroup RCC_HSI14_Config
+/** @defgroup RCC_HSI14_Config RCC HSI14 Config
* @{
*/
#define RCC_HSI14_OFF ((uint32_t)0x00)
@@ -248,7 +270,7 @@
* @}
*/
-/** @defgroup RCC_LSI_Config
+/** @defgroup RCC_LSI_Config RCC LSI Config
* @{
*/
#define RCC_LSI_OFF ((uint8_t)0x00)
@@ -259,7 +281,7 @@
* @}
*/
-/** @defgroup RCC_PLL_Config
+/** @defgroup RCC_PLL_Config RCC PLL Config
* @{
*/
#define RCC_PLL_NONE ((uint8_t)0x00)
@@ -271,7 +293,7 @@
* @}
*/
-/** @defgroup RCC_PLL_Prediv_Factor
+/** @defgroup RCC_PLL_Prediv_Factor RCC PLL Prediv Factor
* @{
*/
#define RCC_PREDIV_DIV1 RCC_CFGR2_PREDIV_DIV1
@@ -303,7 +325,7 @@
* @}
*/
-/** @defgroup RCC_PLL_Multiplication_Factor
+/** @defgroup RCC_PLL_Multiplication_Factor RCC PLL Multiplication Factor
* @{
*/
#define RCC_PLL_MUL2 RCC_CFGR_PLLMUL2
@@ -334,7 +356,7 @@
* @}
*/
-/** @defgroup RCC_PLL_Clock_Source
+/** @defgroup RCC_PLL_Clock_Source RCC PLL Clock Source
* @{
*/
#define RCC_PLLSOURCE_HSE RCC_CFGR_PLLSRC_HSE_PREDIV
@@ -342,7 +364,7 @@
* @}
*/
-/** @defgroup RCC_System_Clock_Type
+/** @defgroup RCC_System_Clock_Type RCC System Clock Type
* @{
*/
#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001)
@@ -356,7 +378,7 @@
* @}
*/
-/** @defgroup RCC_System_Clock_Source
+/** @defgroup RCC_System_Clock_Source RCC System Clock Source
* @{
*/
#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI
@@ -366,7 +388,7 @@
* @}
*/
-/** @defgroup RCC_System_Clock_Source_Status
+/** @defgroup RCC_System_Clock_Source_Status RCC System Clock Source Status
* @{
*/
#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI
@@ -376,7 +398,7 @@
* @}
*/
-/** @defgroup RCC_AHB_Clock_Source
+/** @defgroup RCC_AHB_Clock_Source RCC AHB Clock Source
* @{
*/
#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1
@@ -398,7 +420,7 @@
* @}
*/
-/** @defgroup RCC_APB1_Clock_Source
+/** @defgroup RCC_APB1_Clock_Source RCC APB1 Clock Source
* @{
*/
#define RCC_HCLK_DIV1 RCC_CFGR_PPRE_DIV1
@@ -414,7 +436,7 @@
* @}
*/
-/** @defgroup RCC_RTC_Clock_Source
+/** @defgroup RCC_RTC_Clock_Source RCC RTC Clock Source
* @{
*/
#define RCC_RTCCLKSOURCE_NONE RCC_BDCR_RTCSEL_NOCLOCK
@@ -430,8 +452,7 @@
* @}
*/
-
-/** @defgroup RCC_USART1_Clock_Source
+/** @defgroup RCC_USART1_Clock_Source RCC USART1 Clock Source
* @{
*/
#define RCC_USART1CLKSOURCE_PCLK1 RCC_CFGR3_USART1SW_PCLK
@@ -447,7 +468,7 @@
* @}
*/
-/** @defgroup RCC_I2C1_Clock_Source
+/** @defgroup RCC_I2C1_Clock_Source RCC I2C1 Clock Source
* @{
*/
#define RCC_I2C1CLKSOURCE_HSI RCC_CFGR3_I2C1SW_HSI
@@ -459,7 +480,7 @@
* @}
*/
-/** @defgroup RCC_MCOx_Index
+/** @defgroup RCC_MCOx_Index RCC MCOx Index
* @{
*/
#define RCC_MCO ((uint32_t)0x00000000)
@@ -469,7 +490,7 @@
* @}
*/
-/** @defgroup RCC_MCO_Clock_Source
+/** @defgroup RCC_MCO_Clock_Source RCC MCO Clock Source
* @{
*/
#define RCC_MCOSOURCE_NONE RCC_CFGR_MCO_NOCLOCK
@@ -484,7 +505,7 @@
* @}
*/
-/** @defgroup RCC_Interrupt
+/** @defgroup RCC_Interrupt RCC Interrupt
* @{
*/
#define RCC_IT_LSIRDY ((uint8_t)0x01)
@@ -498,7 +519,7 @@
* @}
*/
-/** @defgroup RCC_Flag
+/** @defgroup RCC_Flag RCC Flag
* Elements values convention: 0XXYYYYYb
* - YYYYY : Flag position in the register
* - XX : Register index
@@ -558,8 +579,19 @@
* @}
*/
+/** @defgroup RCC_Calibration_values RCC Calibration values
+ * @{
+ */
#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F)
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_Timeout
+ * @{
+ */
+
#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT
#define HSI_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
#define LSI_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */
@@ -572,15 +604,23 @@
/**
* @}
*/
+
+/**
+ * @}
+ */
+
/* Exported macro ------------------------------------------------------------*/
-/** @defgroup RCC_Exported_Macros
+
+/** @defgroup RCC_Exported_Macros RCC Exported Macros
* @{
*/
-/** @brief Enable or disable the AHB peripheral clock.
+/** @defgroup RCC_AHB_Clock_Enable_Disable RCC AHB Clock Enable Disable
+ * @brief Enable or disable the AHB peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
+ * @{
*/
#define __GPIOA_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOAEN))
#define __GPIOB_CLK_ENABLE() (RCC->AHBENR |= (RCC_AHBENR_GPIOBEN))
@@ -599,11 +639,16 @@
#define __DMA1_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_DMA1EN))
#define __SRAM_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_SRAMEN))
#define __FLITF_CLK_DISABLE() (RCC->AHBENR &= ~(RCC_AHBENR_FLITFEN))
+/**
+ * @}
+ */
-/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
+/** @defgroup RCC_APB1_Clock_Enable_Disable RCC APB1 Clock Enable Disable
+ * @brief Enable or disable the Low Speed APB (APB1) peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
+ * @{
*/
#define __TIM3_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM3EN))
#define __TIM14_CLK_ENABLE() (RCC->APB1ENR |= (RCC_APB1ENR_TIM14EN))
@@ -616,11 +661,16 @@
#define __WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN))
#define __I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN))
#define __PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN))
-
-/** @brief Enable or disable the High Speed APB (APB2) peripheral clock.
+/**
+ * @}
+ */
+
+/** @defgroup RCC_APB2_Clock_Enable_Disable RCC APB2 Clock Enable Disable
+ * @brief Enable or disable the High Speed APB (APB2) peripheral clock.
* @note After reset, the peripheral clock (used for registers read/write access)
* is disabled and the application software has to enable this clock before
* using it.
+ * @{
*/
#define __SYSCFG_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_SYSCFGEN))
#define __ADC1_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_ADC1EN))
@@ -639,9 +689,14 @@
#define __TIM17_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM17EN))
#define __USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
#define __DBGMCU_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_DBGMCUEN))
+/**
+ * @}
+ */
-/** @brief Force or release AHB peripheral reset.
- */
+/** @defgroup RCC_AHB_Force_Release_Reset RCC AHB Force Release Reset
+ * @brief Force or release AHB peripheral reset.
+ * @{
+ */
#define __AHB_FORCE_RESET() (RCC->AHBRSTR = 0xFFFFFFFF)
#define __GPIOA_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOARST))
#define __GPIOB_FORCE_RESET() (RCC->AHBRSTR |= (RCC_AHBRSTR_GPIOBRST))
@@ -653,9 +708,14 @@
#define __GPIOB_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOBRST))
#define __GPIOC_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOCRST))
#define __GPIOF_RELEASE_RESET() (RCC->AHBRSTR &= ~(RCC_AHBRSTR_GPIOFRST))
+/**
+ * @}
+ */
-/** @brief Force or release APB1 peripheral reset.
- */
+/** @defgroup RCC_APB1_Force_Release_Reset RCC APB1 Force Release Reset
+ * @brief Force or release APB1 peripheral reset.
+ * @{
+ */
#define __APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFF)
#define __TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST))
#define __TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST))
@@ -669,9 +729,14 @@
#define __WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST))
#define __I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST))
#define __PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST))
+/**
+ * @}
+ */
-/** @brief Force or release APB2 peripheral reset.
- */
+/** @defgroup RCC_APB2_Force_Release_Reset RCC APB2 Force Release Reset
+ * @brief Force or release APB2 peripheral reset.
+ * @{
+ */
#define __APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFF)
#define __SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST))
#define __ADC1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADC1RST))
@@ -691,7 +756,14 @@
#define __TIM16_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM16RST))
#define __TIM17_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM17RST))
#define __DBGMCU_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_DBGMCURST))
+/**
+ * @}
+ */
+/** @defgroup RCC_HSI_Configuration RCC HSI Configuration
+ * @{
+ */
+
/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI).
* @note The HSI is stopped by hardware when entering STOP and STANDBY modes.
* It is used (enabled by hardware) as system clock source after startup
@@ -705,22 +777,28 @@
* system clock source.
* @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator
* clock cycles.
- */
+ */
#define __HAL_RCC_HSI_ENABLE() SET_BIT(RCC->CR, RCC_CR_HSION)
#define __HAL_RCC_HSI_DISABLE() CLEAR_BIT(RCC->CR, RCC_CR_HSION)
-
/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value.
* @note The calibration is used to compensate for the variations in voltage
* and temperature that influence the frequency of the internal HSI RC.
* @param __HSICalibrationValue__: specifies the calibration trimming value
* (default is RCC_HSICALIBRATION_DEFAULT).
* This parameter must be a number between 0 and 0x1F.
- */
+ */
#define RCC_CR_HSITRIM_BitNumber 3
#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) \
MODIFY_REG(RCC->CR, RCC_CR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << RCC_CR_HSITRIM_BitNumber)
+/**
+ * @}
+ */
+/** @defgroup RCC_LSI_Configuration RCC LSI Configuration
+ * @{
+ */
+
/** @brief Macro to enable or disable the Internal Low Speed oscillator (LSI).
* @note After enabling the LSI, the application software should wait on
* LSIRDY flag to be set indicating that LSI clock is stable and can
@@ -728,10 +806,17 @@
* @note LSI can not be disabled if the IWDG is running.
* @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator
* clock cycles.
- */
+ */
#define __HAL_RCC_LSI_ENABLE() SET_BIT(RCC->CSR, RCC_CSR_LSION)
#define __HAL_RCC_LSI_DISABLE() CLEAR_BIT(RCC->CSR, RCC_CSR_LSION)
+/**
+ * @}
+ */
+/** @defgroup RCC_HSE_Configuration RCC HSE Configuration
+ * @{
+ */
+
/**
* @brief Macro to configure the External High Speed oscillator (HSE).
* @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application
@@ -763,7 +848,13 @@
*/
#define __HAL_RCC_HSE_PREDIV_CONFIG(__HSEPredivValue__) \
MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (uint32_t)(__HSEPredivValue__))
+/**
+ * @}
+ */
+/** @defgroup RCC_LSE_Configuration RCC LSE Configuration
+ * @{
+ */
/**
* @brief Macro to configure the External Low Speed oscillator (LSE).
* @note As the LSE is in the Backup domain and write access is denied to
@@ -782,7 +873,14 @@
*/
#define __HAL_RCC_LSE_CONFIG(__STATE__) \
MODIFY_REG(RCC->BDCR, RCC_BDCR_LSEON|RCC_BDCR_LSEBYP, (uint32_t)(__STATE__))
+/**
+ * @}
+ */
+/** @defgroup RCC_HSI14_Configuration RCC_HSI14_Configuration
+ * @{
+ */
+
/** @brief Macros to enable or disable the Internal 14Mhz High Speed oscillator (HSI14).
* @note The HSI14 is stopped by hardware when entering STOP and STANDBY modes.
* @note HSI14 can not be stopped if it is used as system clock source. In this case,
@@ -800,8 +898,7 @@
*/
#define __HAL_RCC_HSI14ADC_ENABLE() CLEAR_BIT(RCC->CR2, RCC_CR2_HSI14DIS)
#define __HAL_RCC_HSI14ADC_DISABLE() SET_BIT(RCC->CR2, RCC_CR2_HSI14DIS)
-
-
+
/** @brief Macro to adjust the Internal 14Mhz High Speed oscillator (HSI) calibration value.
* @note The calibration is used to compensate for the variations in voltage
* and temperature that influence the frequency of the internal HSI14 RC.
@@ -812,7 +909,14 @@
#define RCC_CR2_HSI14TRIM_BitNumber 3
#define __HAL_RCC_HSI14_CALIBRATIONVALUE_ADJUST(__HSI14CalibrationValue__) \
MODIFY_REG(RCC->CR2, RCC_CR2_HSI14TRIM, (uint32_t)(__HSI14CalibrationValue__) << RCC_CR2_HSI14TRIM_BitNumber)
+/**
+ * @}
+ */
+/** @defgroup RCC_USARTx_Clock_Config RCC USARTx Clock Config
+ * @{
+ */
+
/** @brief Macro to configure the USART1 clock (USART1CLK).
* @param __USART1CLKSource__: specifies the USART1 clock source.
* This parameter can be one of the following values:
@@ -832,7 +936,14 @@
* @arg RCC_USART1CLKSOURCE_LSE: LSE selected as USART1 clock
*/
#define __HAL_RCC_GET_USART1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART1SW)))
+/**
+ * @}
+ */
+/** @defgroup RCC_I2Cx_Clock_Config RCC I2Cx Clock Config
+ * @{
+ */
+
/** @brief Macro to configure the I2C1 clock (I2C1CLK).
* @param __I2C1CLKSource__: specifies the I2C1 clock source.
* This parameter can be one of the following values:
@@ -848,7 +959,13 @@
* @arg RCC_I2C1CLKSOURCE_SYSCLK: System Clock selected as I2C1 clock
*/
#define __HAL_RCC_GET_I2C1_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_I2C1SW)))
+/**
+ * @}
+ */
+/** @addtogroup RCC_USARTx_Clock_Config RCC USARTx Clock Config
+ * @{
+ */
/** @brief Macro to configure the USART2 clock (USART2CLK).
* @param __USART2CLKSource__: specifies the USART2 clock source.
* This parameter can be one of the following values:
@@ -868,7 +985,13 @@
* @arg RCC_USART2CLKSOURCE_LSE: LSE selected as USART2 clock
*/
#define __HAL_RCC_GET_USART2_SOURCE() ((uint32_t)(READ_BIT(RCC->CFGR3, RCC_CFGR3_USART2SW)))
+/**
+ * @}
+ */
+/** @defgroup RCC_RTC_Clock_Configuration RCC RTC Clock Configuration
+ * @{
+ */
/** @brief Macros to enable or disable the the RTC clock.
* @note These macros must be used only after the RTC clock source was selected.
*/
@@ -908,7 +1031,14 @@
* @arg RCC_RTCCLKSOURCE_HSE_DIV32: HSE clock divided by 32 selected as RTC clock
*/
#define __HAL_RCC_GET_RTC_SOURCE() ((uint32_t)(READ_BIT(RCC->BDCR, RCC_BDCR_RTCSEL)))
+/**
+ * @}
+ */
+/** @defgroup RCC_Force_Release_Backup RCC Force Release Backup
+ * @{
+ */
+
/** @brief Macro to force or release the Backup domain reset.
* @note These macros reset the RTC peripheral (including the backup registers)
* and the RTC clock source selection in RCC_CSR register.
@@ -916,7 +1046,14 @@
*/
#define __HAL_RCC_BACKUPRESET_FORCE() SET_BIT(RCC->BDCR, RCC_BDCR_BDRST)
#define __HAL_RCC_BACKUPRESET_RELEASE() CLEAR_BIT(RCC->BDCR, RCC_BDCR_BDRST)
+/**
+ * @}
+ */
+/** @defgroup RCC_PLL_Configuration RCC PLL Configuration
+ * @{
+ */
+
/** @brief Macro to enable or disable the PLL.
* @note After enabling the PLL, the application software should wait on
* PLLRDY flag to be set indicating that PLL clock is stable and can
@@ -945,8 +1082,14 @@
MODIFY_REG(RCC->CFGR2, RCC_CFGR2_PREDIV, (__PREDIV__)); \
MODIFY_REG(RCC->CFGR, RCC_CFGR_PLLMUL | RCC_CFGR_PLLSRC, (uint32_t)((__PLLMUL__)|(__RCC_PLLSource__))); \
} while(0)
-
+/**
+ * @}
+ */
+/** @defgroup RCC_Get_Clock_source RCC Get Clock source
+ * @{
+ */
+
/** @brief Macro to get the clock source used as system clock.
* @retval The clock source used as system clock.
* The returned value can be one of the following value:
@@ -963,12 +1106,11 @@
* - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source.
*/
#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(READ_BIT(RCC->CFGR, RCC_CFGR_PLLSRC)))
-
/**
* @}
- */
+ */
-/** @defgroup RCC_Flags_Interrupts_Management
+/** @defgroup RCC_Flags_Interrupts_Management RCC Flags Interrupts Management
* @brief macros to manage the specified RCC Flags and interrupts.
* @{
*/
@@ -1067,16 +1209,36 @@
* @}
*/
+/**
+ * @}
+ */
+
/* Include RCC HAL Extension module */
#include "stm32f0xx_hal_rcc_ex.h"
/* Exported functions --------------------------------------------------------*/
+/** @addtogroup RCC_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup RCC_Exported_Functions_Group1
+ * @{
+ */
+
/* Initialization and de-initialization functions ***************************/
void HAL_RCC_DeInit(void);
HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct);
HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency);
+/**
+ * @}
+ */
+
+/** @addtogroup RCC_Exported_Functions_Group2
+ * @{
+ */
+
/* Peripheral Control functions *********************************************/
void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv);
void HAL_RCC_EnableCSS(void);
@@ -1101,6 +1263,14 @@
* @}
*/
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
#ifdef __cplusplus
}
#endif
@@ -1108,3 +1278,4 @@
#endif /* __STM32F0xx_HAL_RCC_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+