Diff: TARGET_NUCLEO_F303RE/stm32f3xx_hal_pcd.h

Revision:

97:4298809c7c9e

Parent:

96:487b796308b0

--- a/TARGET_NUCLEO_F303RE/stm32f3xx_hal_pcd.h	Tue Mar 17 14:27:45 2015 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,798 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f3xx_hal_pcd.h
-  * @author  MCD Application Team
-  * @version V1.1.0
-  * @date    12-Sept-2014
-  * @brief   Header file of PCD HAL module.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F3xx_HAL_PCD_H
-#define __STM32F3xx_HAL_PCD_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#if defined(STM32F302xE) || defined(STM32F303xE) || \
-    defined(STM32F302xC) || defined(STM32F303xC) || \
-    defined(STM32F302x8)                         || \
-    defined(STM32F373xC)
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f3xx_hal_def.h"
-
-/** @addtogroup STM32F3xx_HAL_Driver
-  * @{
-  */
-
-/** @addtogroup PCD
-  * @{
-  */ 
-
-/* Exported types ------------------------------------------------------------*/ 
-/** @defgroup PCD_Exported_Types PCD Exported Types
-  * @{
-  */
-
-   /** 
-  * @brief  PCD State structures definition  
-  */  
-typedef enum 
-{
-  PCD_READY    = 0x00,
-  PCD_ERROR    = 0x01,
-  PCD_BUSY     = 0x02,
-  PCD_TIMEOUT  = 0x03
-} PCD_StateTypeDef;
-
-typedef enum
-{
-  /* double buffered endpoint direction */
-  PCD_EP_DBUF_OUT,
-  PCD_EP_DBUF_IN,
-  PCD_EP_DBUF_ERR,
-}PCD_EP_DBUF_DIR;
-
-/* endpoint buffer number */
-typedef enum 
-{
-  PCD_EP_NOBUF,
-  PCD_EP_BUF0,
-  PCD_EP_BUF1
-}PCD_EP_BUF_NUM;  
-
-/** 
-  * @brief  PCD Initialization Structure definition  
-  */
-typedef struct
-{
-  uint32_t dev_endpoints;        /*!< Device Endpoints number.
-                                      This parameter depends on the used USB core.   
-                                      This parameter must be a number between Min_Data = 1 and Max_Data = 15 */    
-
-  uint32_t speed;                /*!< USB Core speed.
-                                      This parameter can be any value of @ref USB_Core_Speed                 */        
-                             
-  uint32_t ep0_mps;              /*!< Set the Endpoint 0 Max Packet size. 
-                                      This parameter can be any value of @ref USB_EP0_MPS                    */              
-                       
-  uint32_t phy_itface;           /*!< Select the used PHY interface.
-                                      This parameter can be any value of @ref USB_Core_PHY                   */ 
-                                
-  uint32_t Sof_enable;           /*!< Enable or disable the output of the SOF signal.                        */  
-  
-  uint32_t low_power_enable;       /*!< Enable or disable Low Power mode                                      */ 
-  
-  uint32_t lpm_enable;             /*!< Enable or disable Battery charging.                                  */    
-
-  uint32_t battery_charging_enable; /*!< Enable or disable Battery charging.                                  */    
-                                
-}PCD_InitTypeDef;
-
-typedef struct
-{
-  uint8_t   num;            /*!< Endpoint number
-                                This parameter must be a number between Min_Data = 1 and Max_Data = 15    */ 
-                                
-  uint8_t   is_in;          /*!< Endpoint direction
-                                This parameter must be a number between Min_Data = 0 and Max_Data = 1     */ 
-  
-  uint8_t   is_stall;       /*!< Endpoint stall condition
-                                This parameter must be a number between Min_Data = 0 and Max_Data = 1     */ 
-  
-  uint8_t   type;           /*!< Endpoint type
-                                 This parameter can be any value of @ref USB_EP_Type                      */ 
-                                
-  uint16_t  pmaadress;      /*!< PMA Address
-                                 This parameter can be any value between Min_addr = 0 and Max_addr = 1K   */ 
-  
-  
-  uint16_t  pmaaddr0;       /*!< PMA Address0
-                                 This parameter can be any value between Min_addr = 0 and Max_addr = 1K   */   
-  
-  
-  uint16_t  pmaaddr1;        /*!< PMA Address1
-                                 This parameter can be any value between Min_addr = 0 and Max_addr = 1K   */   
-  
-  
-  uint8_t   doublebuffer;    /*!< Double buffer enable
-                                 This parameter can be 0 or 1                                             */    
-                                
-  uint32_t  maxpacket;      /*!< Endpoint Max packet size
-                                 This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */
-
-  uint8_t   *xfer_buff;     /*!< Pointer to transfer buffer                                               */
-                                
-  
-  uint32_t  xfer_len;       /*!< Current transfer length                                                  */
-  
-  uint32_t  xfer_count;     /*!< Partial transfer length in case of multi packet transfer                 */
-
-}PCD_EPTypeDef;
-
-typedef   USB_TypeDef PCD_TypeDef; 
-
-/** 
-  * @brief  PCD Handle Structure definition  
-  */ 
-typedef struct
-{
-  PCD_TypeDef             *Instance;   /*!< Register base address              */ 
-  PCD_InitTypeDef         Init;       /*!< PCD required parameters            */
-  __IO uint8_t            USB_Address; /*!< USB Address            */  
-  PCD_EPTypeDef           IN_ep[8];  /*!< IN endpoint parameters             */
-  PCD_EPTypeDef           OUT_ep[8]; /*!< OUT endpoint parameters            */ 
-  HAL_LockTypeDef         Lock;       /*!< PCD peripheral status              */
-  __IO PCD_StateTypeDef   State;      /*!< PCD communication state            */
-  uint32_t                Setup[12];  /*!< Setup packet buffer                */
-  void                    *pData;      /*!< Pointer to upper stack Handler     */    
-  
-} PCD_HandleTypeDef;
-
-/**
-  * @}
-  */ 
- 
-#include "stm32f3xx_hal_pcd_ex.h"    
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup PCD_Exported_Constants PCD Exported Constants
-  * @{
-  */
-
-/** @defgroup USB_Core_Speed USB Core Speed
-  * @{
-  */
-#define PCD_SPEED_HIGH               0 /* Not Supported */
-#define PCD_SPEED_FULL               2
-/**
-  * @}
-  */
-  
-/** @defgroup USB_Core_PHY USB Core PHY
-  * @{
-  */
-#define PCD_PHY_EMBEDDED             2
-/**
-  * @}
-  */
-
-/** @defgroup USB_EP0_MPS USB EP0 MPS
-  * @{
-  */
-#define DEP0CTL_MPS_64                         0
-#define DEP0CTL_MPS_32                         1
-#define DEP0CTL_MPS_16                         2
-#define DEP0CTL_MPS_8                          3
-
-#define PCD_EP0MPS_64                          DEP0CTL_MPS_64
-#define PCD_EP0MPS_32                          DEP0CTL_MPS_32
-#define PCD_EP0MPS_16                          DEP0CTL_MPS_16
-#define PCD_EP0MPS_08                          DEP0CTL_MPS_8 
-/**
-  * @}
-  */ 
-
-/** @defgroup USB_EP_Type USB EP Type
-  * @{
-  */
-#define PCD_EP_TYPE_CTRL                                 0
-#define PCD_EP_TYPE_ISOC                                 1
-#define PCD_EP_TYPE_BULK                                 2
-#define PCD_EP_TYPE_INTR                                 3
-/**
-  * @}
-  */ 
-
-/** @defgroup USB_ENDP USB ENDP
-  * @{
-  */
-
-#define PCD_ENDP0                             ((uint8_t)0)
-#define PCD_ENDP1                             ((uint8_t)1)
-#define PCD_ENDP2                             ((uint8_t)2)
-#define PCD_ENDP3                             ((uint8_t)3)
-#define PCD_ENDP4                             ((uint8_t)4)
-#define PCD_ENDP5                             ((uint8_t)5)
-#define PCD_ENDP6                             ((uint8_t)6)
-#define PCD_ENDP7                             ((uint8_t)7)
-
-/*  Endpoint Kind */
-#define PCD_SNG_BUF                                      0
-#define PCD_DBL_BUF                                      1
-
-#define IS_PCD_ALL_INSTANCE                              IS_USB_ALL_INSTANCE                          
-
-/**
-  * @}
-  */ 
-  
-/**
-  * @}
-  */   
-
-/* Exported macros -----------------------------------------------------------*/
-
-/** @defgroup PCD_Exported_Macros PCD Exported Macros
- *  @brief macros to handle interrupts and specific clock configurations
- * @{
- */
-#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__)      ((((__HANDLE__)->Instance->ISTR) & (__INTERRUPT__)) == (__INTERRUPT__))
-#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__)    (((__HANDLE__)->Instance->ISTR) = ~(__INTERRUPT__))
-
-#define  USB_EXTI_LINE_WAKEUP              ((uint32_t)0x00040000)  /*!< External interrupt line 18 Connected to the USB FS EXTI Line */
-
-#define __HAL_USB_EXTI_ENABLE_IT()                 EXTI->IMR |= USB_EXTI_LINE_WAKEUP
-#define __HAL_USB_EXTI_DISABLE_IT()                EXTI->IMR &= ~(USB_EXTI_LINE_WAKEUP)
-#define __HAL_USB_EXTI_GENERATE_SWIT(__EXTILINE__) (EXTI->SWIER |= (__EXTILINE__))
-
-#define __HAL_USB_EXTI_GET_FLAG()                  EXTI->PR & (USB_EXTI_LINE_WAKEUP)
-#define __HAL_USB_EXTI_CLEAR_FLAG()                EXTI->PR = USB_EXTI_LINE_WAKEUP
-
-#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER()   do {\
-                                                     EXTI->FTSR &= ~(USB_EXTI_LINE_WAKEUP);\
-                                                     EXTI->RTSR |= USB_EXTI_LINE_WAKEUP;\
-                                                   } while(0)
-
-#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER()  do {\
-                                                     EXTI->FTSR |= (USB_EXTI_LINE_WAKEUP);\
-                                                     EXTI->RTSR &= ~(USB_EXTI_LINE_WAKEUP);\
-                                                   } while(0)
-
-#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER() do {\
-                                                     EXTI->RTSR &= ~(USB_EXTI_LINE_WAKEUP);\
-                                                     EXTI->FTSR &= ~(USB_EXTI_LINE_WAKEUP);\
-                                                     EXTI->RTSR |= USB_EXTI_LINE_WAKEUP;\
-                                                     EXTI->FTSR |= USB_EXTI_LINE_WAKEUP;\
-                                                   } while(0)
-/**
-  * @}
-  */                                                      
-
-/* Internal macros -----------------------------------------------------------*/
-
-/** @defgroup PCD_Private_Macros PCD Private Macros
- *  @brief macros to handle interrupts and specific clock configurations
-  * @{
-  */
-
-/* SetENDPOINT */
-#define PCD_SET_ENDPOINT(USBx, bEpNum,wRegValue)  (*(&USBx->EP0R + bEpNum * 2)= (uint16_t)wRegValue)
-
-/* GetENDPOINT */
-#define PCD_GET_ENDPOINT(USBx, bEpNum)        (*(&USBx->EP0R + bEpNum * 2))
-
-
-
-/**
-  * @brief  sets the type in the endpoint register(bits EP_TYPE[1:0])
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @param  wType: Endpoint Type.
-  * @retval None
-  */
-#define PCD_SET_EPTYPE(USBx, bEpNum,wType) (PCD_SET_ENDPOINT(USBx, bEpNum,\
-                                  ((PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EP_T_MASK) | wType )))
-
-/**
-  * @brief  gets the type in the endpoint register(bits EP_TYPE[1:0])
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval Endpoint Type
-  */
-#define PCD_GET_EPTYPE(USBx, bEpNum) (PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EP_T_FIELD)
-
-
-/**
-  * @brief free buffer used from the application realizing it to the line
-          toggles bit SW_BUF in the double buffered endpoint register
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @param  bDir: Direction
-  * @retval None
-  */
-#define PCD_FreeUserBuffer(USBx, bEpNum, bDir)\
-{\
-  if (bDir == PCD_EP_DBUF_OUT)\
-  { /* OUT double buffered endpoint */\
-    PCD_TX_DTOG(USBx, bEpNum);\
-  }\
-  else if (bDir == PCD_EP_DBUF_IN)\
-  { /* IN double buffered endpoint */\
-    PCD_RX_DTOG(USBx, bEpNum);\
-  }\
-}
-
-/**
-  * @brief gets direction of the double buffered endpoint
-  * @param   USBx: USB peripheral instance register address.
-  * @param   bEpNum: Endpoint Number.
-  * @retval EP_DBUF_OUT, EP_DBUF_IN,
-  *         EP_DBUF_ERR if the endpoint counter not yet programmed.
-  */
-#define PCD_GET_DB_DIR(USBx, bEpNum)\
-{\
-  if ((uint16_t)(*PCD_EP_RX_CNT(USBx, bEpNum) & 0xFC00) != 0)\
-    return(PCD_EP_DBUF_OUT);\
-  else if (((uint16_t)(*PCD_EP_TX_CNT(USBx, bEpNum)) & 0x03FF) != 0)\
-    return(PCD_EP_DBUF_IN);\
-  else\
-    return(PCD_EP_DBUF_ERR);\
-}
-
-/**
-  * @brief  sets the status for tx transfer (bits STAT_TX[1:0]).
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @param  wState: new state
-  * @retval None
-  */
-#define PCD_SET_EP_TX_STATUS(USBx, bEpNum, wState) {\
-   register uint16_t _wRegVal;       \
-   \
-    _wRegVal = PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPTX_DTOGMASK;\
-   /* toggle first bit ? */     \
-   if((USB_EPTX_DTOG1 & wState)!= 0)      \
-     _wRegVal ^= USB_EPTX_DTOG1;        \
-   /* toggle second bit ?  */         \
-   if((USB_EPTX_DTOG2 & wState)!= 0)      \
-     _wRegVal ^= USB_EPTX_DTOG2;        \
-   PCD_SET_ENDPOINT(USBx, bEpNum, (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX));    \
-  } /* PCD_SET_EP_TX_STATUS */
-
-/**
-  * @brief  sets the status for rx transfer (bits STAT_TX[1:0])
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @param  wState: new state
-  * @retval None
-  */
-#define PCD_SET_EP_RX_STATUS(USBx, bEpNum,wState) {\
-    register uint16_t _wRegVal;   \
-    \
-    _wRegVal = PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPRX_DTOGMASK;\
-    /* toggle first bit ? */  \
-    if((USB_EPRX_DTOG1 & wState)!= 0) \
-      _wRegVal ^= USB_EPRX_DTOG1;  \
-    /* toggle second bit ? */  \
-    if((USB_EPRX_DTOG2 & wState)!= 0) \
-      _wRegVal ^= USB_EPRX_DTOG2;  \
-    PCD_SET_ENDPOINT(USBx, bEpNum, (_wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX)); \
-  } /* PCD_SET_EP_RX_STATUS */
-
-/**
-  * @brief  sets the status for rx & tx (bits STAT_TX[1:0] & STAT_RX[1:0])
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @param  wStaterx: new state.
-  * @param  wStatetx: new state.
-  * @retval None
-  */
-#define PCD_SET_EP_TXRX_STATUS(USBx,bEpNum,wStaterx,wStatetx) {\
-    register uint32_t _wRegVal;   \
-    \
-    _wRegVal = PCD_GET_ENDPOINT(USBx, bEpNum) & (USB_EPRX_DTOGMASK |USB_EPTX_STAT) ;\
-    /* toggle first bit ? */  \
-    if((USB_EPRX_DTOG1 & wStaterx)!= 0) \
-      _wRegVal ^= USB_EPRX_DTOG1;  \
-    /* toggle second bit ? */  \
-    if((USB_EPRX_DTOG2 & wStaterx)!= 0) \
-      _wRegVal ^= USB_EPRX_DTOG2;  \
-    /* toggle first bit ? */     \
-    if((USB_EPTX_DTOG1 & wStatetx)!= 0)      \
-      _wRegVal ^= USB_EPTX_DTOG1;        \
-    /* toggle second bit ?  */         \
-    if((USB_EPTX_DTOG2 & wStatetx)!= 0)      \
-      _wRegVal ^= USB_EPTX_DTOG2;        \
-    PCD_SET_ENDPOINT(USBx, bEpNum, _wRegVal | USB_EP_CTR_RX|USB_EP_CTR_TX);    \
-  } /* PCD_SET_EP_TXRX_STATUS */
-
-/**
-  * @brief  gets the status for tx/rx transfer (bits STAT_TX[1:0]
-  *         /STAT_RX[1:0])
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval status
-  */
-#define PCD_GET_EP_TX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPTX_STAT)
-
-#define PCD_GET_EP_RX_STATUS(USBx, bEpNum) ((uint16_t)PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPRX_STAT)
-
-/**
-  * @brief  sets directly the VALID tx/rx-status into the endpoint register
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval None
-  */
-#define PCD_SET_EP_TX_VALID(USBx, bEpNum)     (PCD_SET_EP_TX_STATUS(USBx, bEpNum, USB_EP_TX_VALID))
-
-#define PCD_SET_EP_RX_VALID(USBx, bEpNum)     (PCD_SET_EP_RX_STATUS(USBx, bEpNum, USB_EP_RX_VALID))
-
-/**
-  * @brief  checks stall condition in an endpoint.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval TRUE = endpoint in stall condition.
-  */
-#define PCD_GET_EP_TX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_TX_STATUS(USBx, bEpNum) \
-                                   == USB_EP_TX_STALL)
-#define PCD_GET_EP_RX_STALL_STATUS(USBx, bEpNum) (PCD_GET_EP_RX_STATUS(USBx, bEpNum) \
-                                   == USB_EP_RX_STALL)
-
-/**
-  * @brief  set & clear EP_KIND bit.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval None
-  */
-#define PCD_SET_EP_KIND(USBx, bEpNum)    (PCD_SET_ENDPOINT(USBx, bEpNum, \
-                                (USB_EP_CTR_RX|USB_EP_CTR_TX|((PCD_GET_ENDPOINT(USBx, bEpNum) | USB_EP_KIND) & USB_EPREG_MASK))))
-#define PCD_CLEAR_EP_KIND(USBx, bEpNum)  (PCD_SET_ENDPOINT(USBx, bEpNum, \
-                                (USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPKIND_MASK))))
-
-/**
-  * @brief  Sets/clears directly STATUS_OUT bit in the endpoint register.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval None
-  */
-#define PCD_SET_OUT_STATUS(USBx, bEpNum)    PCD_SET_EP_KIND(USBx, bEpNum)
-#define PCD_CLEAR_OUT_STATUS(USBx, bEpNum)  PCD_CLEAR_EP_KIND(USBx, bEpNum)
-
-/**
-  * @brief  Sets/clears directly EP_KIND bit in the endpoint register.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval None
-  */
-#define PCD_SET_EP_DBUF(USBx, bEpNum)   PCD_SET_EP_KIND(USBx, bEpNum)
-#define PCD_CLEAR_EP_DBUF(USBx, bEpNum) PCD_CLEAR_EP_KIND(USBx, bEpNum)
-
-/**
-  * @brief  Clears bit CTR_RX / CTR_TX in the endpoint register.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval None
-  */
-#define PCD_CLEAR_RX_EP_CTR(USBx, bEpNum)   (PCD_SET_ENDPOINT(USBx, bEpNum,\
-                                   PCD_GET_ENDPOINT(USBx, bEpNum) & 0x7FFF & USB_EPREG_MASK))
-#define PCD_CLEAR_TX_EP_CTR(USBx, bEpNum)   (PCD_SET_ENDPOINT(USBx, bEpNum,\
-                                   PCD_GET_ENDPOINT(USBx, bEpNum) & 0xFF7F & USB_EPREG_MASK))
-
-/**
-  * @brief  Toggles DTOG_RX / DTOG_TX bit in the endpoint register.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval None
-  */
-#define PCD_RX_DTOG(USBx, bEpNum)    (PCD_SET_ENDPOINT(USBx, bEpNum, \
-                                   USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_RX | (PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPREG_MASK)))
-#define PCD_TX_DTOG(USBx, bEpNum)    (PCD_SET_ENDPOINT(USBx, bEpNum, \
-                                   USB_EP_CTR_RX|USB_EP_CTR_TX|USB_EP_DTOG_TX | (PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPREG_MASK)))
-
-/**
-  * @brief  Clears DTOG_RX / DTOG_TX bit in the endpoint register.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval None
-  */
-#define PCD_CLEAR_RX_DTOG(USBx, bEpNum)  if((PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EP_DTOG_RX) != 0)\
-    PCD_RX_DTOG(USBx, bEpNum)
-#define PCD_CLEAR_TX_DTOG(USBx, bEpNum)  if((PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EP_DTOG_TX) != 0)\
-    PCD_TX_DTOG(USBx, bEpNum)
-      
-/**
-  * @brief  Sets address in an endpoint register.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @param  bAddr: Address.
-  * @retval None
-  */
-#define PCD_SET_EP_ADDRESS(USBx, bEpNum,bAddr) PCD_SET_ENDPOINT(USBx, bEpNum,\
-    USB_EP_CTR_RX|USB_EP_CTR_TX|(PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPREG_MASK) | bAddr)
-
-#define PCD_GET_EP_ADDRESS(USBx, bEpNum) ((uint8_t)(PCD_GET_ENDPOINT(USBx, bEpNum) & USB_EPADDR_FIELD))
-
-/**
-  * @brief  sets address of the tx/rx buffer.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @param  wAddr: address to be set (must be word aligned).
-  * @retval None
-  */
-#define PCD_SET_EP_TX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_TX_ADDRESS(USBx, bEpNum) = ((wAddr >> 1) << 1))
-#define PCD_SET_EP_RX_ADDRESS(USBx, bEpNum,wAddr) (*PCD_EP_RX_ADDRESS(USBx, bEpNum) = ((wAddr >> 1) << 1))
-
-/**
-  * @brief  Gets address of the tx/rx buffer.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval address of the buffer.
-  */
-#define PCD_GET_EP_TX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_TX_ADDRESS(USBx, bEpNum))
-#define PCD_GET_EP_RX_ADDRESS(USBx, bEpNum) ((uint16_t)*PCD_EP_RX_ADDRESS(USBx, bEpNum))
-
-/**
-  * @brief  Sets counter of rx buffer with no. of blocks.
-  * @param  dwReg: Register
-  * @param  wCount: Counter.
-  * @param  wNBlocks: no. of Blocks.
-  * @retval None
-  */
-#define PCD_CALC_BLK32(dwReg,wCount,wNBlocks) {\
-    wNBlocks = wCount >> 5;\
-    if((wCount & 0x1f) == 0)\
-      wNBlocks--;\
-    *pdwReg = (uint16_t)((wNBlocks << 10) | 0x8000);\
-  }/* PCD_CALC_BLK32 */
-
-#define PCD_CALC_BLK2(dwReg,wCount,wNBlocks) {\
-    wNBlocks = wCount >> 1;\
-    if((wCount & 0x1) != 0)\
-      wNBlocks++;\
-    *pdwReg = (uint16_t)(wNBlocks << 10);\
-  }/* PCD_CALC_BLK2 */
-
-#define PCD_SET_EP_CNT_RX_REG(dwReg,wCount)  {\
-    uint16_t wNBlocks;\
-    if(wCount > 62){PCD_CALC_BLK32(dwReg,wCount,wNBlocks);}\
-    else {PCD_CALC_BLK2(dwReg,wCount,wNBlocks);}\
-  }/* PCD_SET_EP_CNT_RX_REG */
-
-#define PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum,wCount) {\
-    uint16_t *pdwReg = PCD_EP_TX_CNT(USBx, bEpNum); \
-    PCD_SET_EP_CNT_RX_REG(pdwReg, wCount);\
-  }
-/**
-  * @brief  sets counter for the tx/rx buffer.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @param  wCount: Counter value.
-  * @retval None
-  */
-#define PCD_SET_EP_TX_CNT(USBx, bEpNum,wCount) (*PCD_EP_TX_CNT(USBx, bEpNum) = wCount)
-
-
-/**
-  * @brief  gets counter of the tx buffer.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval Counter value
-  */
-#define PCD_GET_EP_TX_CNT(USBx, bEpNum)((uint16_t)(*PCD_EP_TX_CNT(USBx, bEpNum)) & 0x3ff)
-#define PCD_GET_EP_RX_CNT(USBx, bEpNum)((uint16_t)(*PCD_EP_RX_CNT(USBx, bEpNum)) & 0x3ff)
-
-/**
-  * @brief  Sets buffer 0/1 address in a double buffer endpoint.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @param  wBuf0Addr: buffer 0 address.
-  * @retval Counter value
-  */
-#define PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum,wBuf0Addr) {PCD_SET_EP_TX_ADDRESS(USBx, bEpNum, wBuf0Addr);}
-#define PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum,wBuf1Addr) {PCD_SET_EP_RX_ADDRESS(USBx, bEpNum, wBuf1Addr);}
-
-/**
-  * @brief  Sets addresses in a double buffer endpoint.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @param  wBuf0Addr: buffer 0 address.
-  * @param  wBuf1Addr = buffer 1 address.
-  * @retval None
-  */
-#define PCD_SET_EP_DBUF_ADDR(USBx, bEpNum,wBuf0Addr,wBuf1Addr) { \
-    PCD_SET_EP_DBUF0_ADDR(USBx, bEpNum, wBuf0Addr);\
-    PCD_SET_EP_DBUF1_ADDR(USBx, bEpNum, wBuf1Addr);\
-  } /* PCD_SET_EP_DBUF_ADDR */
-
-/**
-  * @brief  Gets buffer 0/1 address of a double buffer endpoint.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval None
-  */
-#define PCD_GET_EP_DBUF0_ADDR(USBx, bEpNum) (PCD_GET_EP_TX_ADDRESS(USBx, bEpNum))
-#define PCD_GET_EP_DBUF1_ADDR(USBx, bEpNum) (PCD_GET_EP_RX_ADDRESS(USBx, bEpNum))
-
-/**
-  * @brief  Gets buffer 0/1 address of a double buffer endpoint.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @param  bDir: endpoint dir  EP_DBUF_OUT = OUT 
-  *         EP_DBUF_IN  = IN 
-  * @param  wCount: Counter value 
-  * @retval None
-  */
-#define PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount)  { \
-    if(bDir == PCD_EP_DBUF_OUT)\
-      /* OUT endpoint */ \
-    {PCD_SET_EP_RX_DBUF0_CNT(USBx, bEpNum,wCount);} \
-    else if(bDir == PCD_EP_DBUF_IN)\
-      /* IN endpoint */ \
-      *PCD_EP_TX_CNT(USBx, bEpNum) = (uint32_t)wCount;  \
-  } /* SetEPDblBuf0Count*/
-
-#define PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount)  { \
-    if(bDir == PCD_EP_DBUF_OUT)\
-      /* OUT endpoint */ \
-    {PCD_SET_EP_RX_CNT(USBx, bEpNum,wCount);}\
-    else if(bDir == PCD_EP_DBUF_IN)\
-      /* IN endpoint */\
-      *PCD_EP_RX_CNT(USBx, bEpNum) = (uint32_t)wCount; \
-  } /* SetEPDblBuf1Count */
-
-#define PCD_SET_EP_DBUF_CNT(USBx, bEpNum, bDir, wCount) {\
-    PCD_SET_EP_DBUF0_CNT(USBx, bEpNum, bDir, wCount); \
-    PCD_SET_EP_DBUF1_CNT(USBx, bEpNum, bDir, wCount); \
-  } /* PCD_SET_EP_DBUF_CNT  */
-
-/**
-  * @brief  Gets buffer 0/1 rx/tx counter for double buffering.
-  * @param  USBx: USB peripheral instance register address.
-  * @param  bEpNum: Endpoint Number.
-  * @retval None
-  */
-#define PCD_GET_EP_DBUF0_CNT(USBx, bEpNum) (PCD_GET_EP_TX_CNT(USBx, bEpNum))
-#define PCD_GET_EP_DBUF1_CNT(USBx, bEpNum) (PCD_GET_EP_RX_CNT(USBx, bEpNum))
-
-
-/**
-  * @}
-  */
-
-/* Exported functions --------------------------------------------------------*/
-
-/** @addtogroup PCD_Exported_Functions
-  * @{
-  */
-
-/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
-  * @{
-  */
-/* Initialization/de-initialization functions  **********************************/
-HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_DeInit (PCD_HandleTypeDef *hpcd);
-void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd);
-
-/**
-  * @}
-  */
-
-/** @addtogroup PCD_Exported_Functions_Group2 Input and Output operation functions
-  * @{
-  */
-/* I/O operation functions  *****************************************************/
- /* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd);
-
-void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
-void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
-void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
-void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum);
-void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd);
-void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd);
-
-/**
-  * @}
-  */
-
-/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions
-  * @{
-  */
-/* Peripheral Control functions  ************************************************/
-HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address);
-HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type);
-HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
-HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len);
-uint16_t          HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr);
-HAL_StatusTypeDef HAL_PCD_ActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
-HAL_StatusTypeDef HAL_PCD_DeActiveRemoteWakeup(PCD_HandleTypeDef *hpcd);
-/**
-  * @}
-  */
-
-/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions
-  * @{
-  */
-/* Peripheral State functions  **************************************************/
-PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd);
-/**
-  * @}
-  */
-
-/** @addtogroup PCDEx_Private_Functions PCD Extended Private Functions
-  * @{
-  */
-void PCD_WritePMA(USB_TypeDef  *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
-void PCD_ReadPMA(USB_TypeDef  *USBx, uint8_t *pbUsrBuf, uint16_t wPMABufAddr, uint16_t wNBytes);
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-#endif /* STM32F302xE || STM32F303xE || */
-       /* STM32F302xC || STM32F303xC || */
-       /* STM32F302x8                || */
-       /* STM32F373xC                   */
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* __STM32F3xx_HAL_PCD_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/