Filippo Casamassima
/
mbed
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F303RE/stm32f3xx_hal_irda.h
- Revision:
- 97:4298809c7c9e
- Parent:
- 96:487b796308b0
--- a/TARGET_NUCLEO_F303RE/stm32f3xx_hal_irda.h Tue Mar 17 14:27:45 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,626 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f3xx_hal_irda.h
- * @author MCD Application Team
- * @version V1.1.0
- * @date 12-Sept-2014
- * @brief Header file of IRDA HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F3xx_HAL_IRDA_H
-#define __STM32F3xx_HAL_IRDA_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f3xx_hal_def.h"
-
-/** @addtogroup STM32F3xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup IRDA IRDA HAL module driver
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup IRDA_Exported_Types IRDA Exported Types
- * @{
- */
-
-/**
- * @brief IRDA Init Structure definition
- */
-typedef struct
-{
- uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate.
- The baud rate register is computed using the following formula:
- Baud Rate Register = ((PCLKx) / ((hirda->Init.BaudRate))) */
-
- uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
- This parameter can be a value of @ref IRDAEx_Word_Length */
-
- uint16_t Parity; /*!< Specifies the parity mode.
- This parameter can be a value of @ref IRDA_Parity
- @note When parity is enabled, the computed parity is inserted
- at the MSB position of the transmitted data (9th bit when
- the word length is set to 9 data bits; 8th bit when the
- word length is set to 8 data bits). */
-
- uint16_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
- This parameter can be a value of @ref IRDA_Mode */
-
- uint8_t Prescaler; /*!< Specifies the Prescaler value for dividing the UART/USART source clock
- to achieve low-power frequency.
- @note Prescaler value 0 is forbidden */
-
- uint16_t PowerMode; /*!< Specifies the IRDA power mode.
- This parameter can be a value of @ref IRDA_Low_Power */
-}IRDA_InitTypeDef;
-
-/**
- * @brief HAL IRDA State structures definition
- */
-typedef enum
-{
- HAL_IRDA_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
- HAL_IRDA_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
- HAL_IRDA_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
- HAL_IRDA_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
- HAL_IRDA_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
- HAL_IRDA_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
- HAL_IRDA_STATE_TIMEOUT = 0x03, /*!< Timeout state */
- HAL_IRDA_STATE_ERROR = 0x04 /*!< Error */
-}HAL_IRDA_StateTypeDef;
-
-/**
- * @brief HAL IRDA Error Code structure definition
- */
-typedef enum
-{
- HAL_IRDA_ERROR_NONE = 0x00, /*!< No error */
- HAL_IRDA_ERROR_PE = 0x01, /*!< Parity error */
- HAL_IRDA_ERROR_NE = 0x02, /*!< Noise error */
- HAL_IRDA_ERROR_FE = 0x04, /*!< frame error */
- HAL_IRDA_ERROR_ORE = 0x08, /*!< Overrun error */
- HAL_IRDA_ERROR_DMA = 0x10 /*!< DMA transfer error */
-}HAL_IRDA_ErrorTypeDef;
-
-/**
- * @brief IRDA clock sources definition
- */
-typedef enum
-{
- IRDA_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */
- IRDA_CLOCKSOURCE_PCLK2 = 0x01, /*!< PCLK2 clock source */
- IRDA_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */
- IRDA_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
- IRDA_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */
- IRDA_CLOCKSOURCE_UNDEFINED = 0x10 /*!< Undefined clock source */
-}IRDA_ClockSourceTypeDef;
-
-/**
- * @brief IRDA handle Structure definition
- */
-typedef struct
-{
- USART_TypeDef *Instance; /* USART registers base address */
-
- IRDA_InitTypeDef Init; /* IRDA communication parameters */
-
- uint8_t *pTxBuffPtr; /* Pointer to IRDA Tx transfer Buffer */
-
- uint16_t TxXferSize; /* IRDA Tx Transfer size */
-
- uint16_t TxXferCount; /* IRDA Tx Transfer Counter */
-
- uint8_t *pRxBuffPtr; /* Pointer to IRDA Rx transfer Buffer */
-
- uint16_t RxXferSize; /* IRDA Rx Transfer size */
-
- uint16_t RxXferCount; /* IRDA Rx Transfer Counter */
-
- uint16_t Mask; /* USART RX RDR register mask */
-
- DMA_HandleTypeDef *hdmatx; /* IRDA Tx DMA Handle parameters */
-
- DMA_HandleTypeDef *hdmarx; /* IRDA Rx DMA Handle parameters */
-
- HAL_LockTypeDef Lock; /* Locking object */
-
- HAL_IRDA_StateTypeDef State; /* IRDA communication state */
-
- HAL_IRDA_ErrorTypeDef ErrorCode; /* IRDA Error code */
-
-}IRDA_HandleTypeDef;
-
-/**
- * @brief IRDA Configuration enumeration values definition
- */
-typedef enum
-{
- IRDA_BAUDRATE = 0x00,
- IRDA_PARITY = 0x01,
- IRDA_WORDLENGTH = 0x02,
- IRDA_MODE = 0x03,
- IRDA_PRESCALER = 0x04,
- IRDA_POWERMODE = 0x05
-}IRDA_ControlTypeDef;
-
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup IRDA_Exported_Constants IRDA Exported Constants
- * @{
- */
-
-/** @defgroup IRDA_Parity IRDA Parity
- * @{
- */
-#define IRDA_PARITY_NONE ((uint16_t)0x0000)
-#define IRDA_PARITY_EVEN ((uint16_t)USART_CR1_PCE)
-#define IRDA_PARITY_ODD ((uint16_t)(USART_CR1_PCE | USART_CR1_PS))
-#define IS_IRDA_PARITY(PARITY) (((PARITY) == IRDA_PARITY_NONE) || \
- ((PARITY) == IRDA_PARITY_EVEN) || \
- ((PARITY) == IRDA_PARITY_ODD))
-/**
- * @}
- */
-
-
-/** @defgroup IRDA_Transfer_Mode IRDA Transfer Mode
- * @{
- */
-#define IRDA_MODE_RX ((uint16_t)USART_CR1_RE)
-#define IRDA_MODE_TX ((uint16_t)USART_CR1_TE)
-#define IRDA_MODE_TX_RX ((uint16_t)(USART_CR1_TE |USART_CR1_RE))
-#define IS_IRDA_TX_RX_MODE(MODE) ((((MODE) & (~((uint16_t)(IRDA_MODE_TX_RX)))) == (uint16_t)0x00) && ((MODE) != (uint16_t)0x00))
-/**
- * @}
- */
-
-/** @defgroup IRDA_Low_Power IRDA Low Power
- * @{
- */
-#define IRDA_POWERMODE_NORMAL ((uint16_t)0x0000)
-#define IRDA_POWERMODE_LOWPOWER ((uint16_t)USART_CR3_IRLP)
-#define IS_IRDA_POWERMODE(MODE) (((MODE) == IRDA_POWERMODE_LOWPOWER) || \
- ((MODE) == IRDA_POWERMODE_NORMAL))
-/**
- * @}
- */
-
- /** @defgroup IRDA_State IRDA State
- * @{
- */
-#define IRDA_STATE_DISABLE ((uint16_t)0x0000)
-#define IRDA_STATE_ENABLE ((uint16_t)USART_CR1_UE)
-#define IS_IRDA_STATE(STATE) (((STATE) == IRDA_STATE_DISABLE) || \
- ((STATE) == IRDA_STATE_ENABLE))
-/**
- * @}
- */
-
- /** @defgroup IRDA_Mode IRDA Mode
- * @{
- */
-#define IRDA_MODE_DISABLE ((uint16_t)0x0000)
-#define IRDA_MODE_ENABLE ((uint16_t)USART_CR3_IREN)
-#define IS_IRDA_MODE(STATE) (((STATE) == IRDA_MODE_DISABLE) || \
- ((STATE) == IRDA_MODE_ENABLE))
-/**
- * @}
- */
-
-/** @defgroup IRDA_One_Bit IRDA One Bit Sampling
- * @{
- */
-#define IRDA_ONE_BIT_SAMPLE_DISABLED ((uint16_t)0x00000000)
-#define IRDA_ONE_BIT_SAMPLE_ENABLED ((uint16_t)USART_CR3_ONEBIT)
-#define IS_IRDA_ONEBIT_SAMPLE(ONEBIT) (((ONEBIT) == IRDA_ONE_BIT_SAMPLE_DISABLED) || \
- ((ONEBIT) == IRDA_ONE_BIT_SAMPLE_ENABLED))
-/**
- * @}
- */
-
-/** @defgroup IRDA_DMA_Tx IRDA DMA Tx
- * @{
- */
-#define IRDA_DMA_TX_DISABLE ((uint16_t)0x00000000)
-#define IRDA_DMA_TX_ENABLE ((uint16_t)USART_CR3_DMAT)
-#define IS_IRDA_DMA_TX(DMATX) (((DMATX) == IRDA_DMA_TX_DISABLE) || \
- ((DMATX) == IRDA_DMA_TX_ENABLE))
-/**
- * @}
- */
-
-/** @defgroup IRDA_DMA_Rx IRDA DMA Rx
- * @{
- */
-#define IRDA_DMA_RX_DISABLE ((uint16_t)0x0000)
-#define IRDA_DMA_RX_ENABLE ((uint16_t)USART_CR3_DMAR)
-#define IS_IRDA_DMA_RX(DMARX) (((DMARX) == IRDA_DMA_RX_DISABLE) || \
- ((DMARX) == IRDA_DMA_RX_ENABLE))
-/**
- * @}
- */
-
-/** @defgroup IRDA_Flags IRDA Flags
- * Elements values convention: 0xXXXX
- * - 0xXXXX : Flag mask in the ISR register
- * @{
- */
-#define IRDA_FLAG_REACK ((uint32_t)0x00400000)
-#define IRDA_FLAG_TEACK ((uint32_t)0x00200000)
-#define IRDA_FLAG_BUSY ((uint32_t)0x00010000)
-#define IRDA_FLAG_ABRF ((uint32_t)0x00008000)
-#define IRDA_FLAG_ABRE ((uint32_t)0x00004000)
-#define IRDA_FLAG_TXE ((uint32_t)0x00000080)
-#define IRDA_FLAG_TC ((uint32_t)0x00000040)
-#define IRDA_FLAG_RXNE ((uint32_t)0x00000020)
-#define IRDA_FLAG_ORE ((uint32_t)0x00000008)
-#define IRDA_FLAG_NE ((uint32_t)0x00000004)
-#define IRDA_FLAG_FE ((uint32_t)0x00000002)
-#define IRDA_FLAG_PE ((uint32_t)0x00000001)
-/**
- * @}
- */
-
-/** @defgroup IRDA_Interrupt_definition IRDA Interrupts Definition
- * Elements values convention: 0000ZZZZ0XXYYYYYb
- * - YYYYY : Interrupt source position in the XX register (5bits)
- * - XX : Interrupt source register (2bits)
- * - 01: CR1 register
- * - 10: CR2 register
- * - 11: CR3 register
- * - ZZZZ : Flag position in the ISR register(4bits)
- * @{
- */
-#define IRDA_IT_PE ((uint16_t)0x0028)
-#define IRDA_IT_TXE ((uint16_t)0x0727)
-#define IRDA_IT_TC ((uint16_t)0x0626)
-#define IRDA_IT_RXNE ((uint16_t)0x0525)
-#define IRDA_IT_IDLE ((uint16_t)0x0424)
-
-
-
-/** Elements values convention: 000000000XXYYYYYb
- * - YYYYY : Interrupt source position in the XX register (5bits)
- * - XX : Interrupt source register (2bits)
- * - 01: CR1 register
- * - 10: CR2 register
- * - 11: CR3 register
- */
-#define IRDA_IT_ERR ((uint16_t)0x0060)
-
-/** Elements values convention: 0000ZZZZ00000000b
- * - ZZZZ : Flag position in the ISR register(4bits)
- */
-#define IRDA_IT_ORE ((uint16_t)0x0300)
-#define IRDA_IT_NE ((uint16_t)0x0200)
-#define IRDA_IT_FE ((uint16_t)0x0100)
-/**
- * @}
- */
-
-/** @defgroup IRDA_IT_CLEAR_Flags IRDA Interruption Clear Flags
- * @{
- */
-#define IRDA_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
-#define IRDA_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
-#define IRDA_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
-#define IRDA_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
-#define IRDA_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
-/**
- * @}
- */
-
-
-
-/** @defgroup IRDA_Request_Parameters IRDA Request Parameters
- * @{
- */
-#define IRDA_AUTOBAUD_REQUEST ((uint16_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */
-#define IRDA_RXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
-#define IRDA_TXDATA_FLUSH_REQUEST ((uint16_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
-#define IS_IRDA_REQUEST_PARAMETER(PARAM) (((PARAM) == IRDA_AUTOBAUD_REQUEST) || \
- ((PARAM) == IRDA_SENDBREAK_REQUEST) || \
- ((PARAM) == IRDA_MUTE_MODE_REQUEST) || \
- ((PARAM) == IRDA_RXDATA_FLUSH_REQUEST) || \
- ((PARAM) == IRDA_TXDATA_FLUSH_REQUEST))
-/**
- * @}
- */
-
-/** @defgroup IRDA_Interruption_Mask IRDA interruptions flag mask
- * @{
- */
-#define IRDA_IT_MASK ((uint16_t)0x001F)
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macros -----------------------------------------------------------*/
-/** @defgroup IRDA_Exported_Macros IRDA Exported Macros
- * @{
- */
-
-/** @brief Reset IRDA handle state
- * @param __HANDLE__: IRDA handle.
- * @retval None
- */
-#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IRDA_STATE_RESET)
-
-/** @brief Checks whether the specified IRDA flag is set or not.
- * @param __HANDLE__: specifies the IRDA Handle.
- * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
- * UART peripheral
- * @param __FLAG__: specifies the flag to check.
- * This parameter can be one of the following values:
- * @arg IRDA_FLAG_REACK: Receive enable ackowledge flag
- * @arg IRDA_FLAG_TEACK: Transmit enable ackowledge flag
- * @arg IRDA_FLAG_BUSY: Busy flag
- * @arg IRDA_FLAG_ABRF: Auto Baud rate detection flag
- * @arg IRDA_FLAG_ABRE: Auto Baud rate detection error flag
- * @arg IRDA_FLAG_TXE: Transmit data register empty flag
- * @arg IRDA_FLAG_TC: Transmission Complete flag
- * @arg IRDA_FLAG_RXNE: Receive data register not empty flag
- * @arg IRDA_FLAG_IDLE: Idle Line detection flag
- * @arg IRDA_FLAG_ORE: OverRun Error flag
- * @arg IRDA_FLAG_NE: Noise Error flag
- * @arg IRDA_FLAG_FE: Framing Error flag
- * @arg IRDA_FLAG_PE: Parity Error flag
- * @retval The new state of __FLAG__ (TRUE or FALSE).
- */
-#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
-
-/** @brief Enables the specified IRDA interrupt.
- * @param __HANDLE__: specifies the IRDA Handle.
- * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
- * UART peripheral
- * @param __INTERRUPT__: specifies the IRDA interrupt source to enable.
- * This parameter can be one of the following values:
- * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
- * @arg IRDA_IT_TC: Transmission complete interrupt
- * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
- * @arg IRDA_IT_IDLE: Idle line detection interrupt
- * @arg IRDA_IT_PE: Parity Error interrupt
- * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
- * @retval None
- */
-#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
- ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
- ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & IRDA_IT_MASK))))
-
-/** @brief Disables the specified IRDA interrupt.
- * @param __HANDLE__: specifies the IRDA Handle.
- * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
- * UART peripheral
- * @param __INTERRUPT__: specifies the IRDA interrupt source to disable.
- * This parameter can be one of the following values:
- * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
- * @arg IRDA_IT_TC: Transmission complete interrupt
- * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
- * @arg IRDA_IT_IDLE: Idle line detection interrupt
- * @arg IRDA_IT_PE: Parity Error interrupt
- * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
- * @retval None
- */
-#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
- ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))): \
- ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & IRDA_IT_MASK))))
-
-
-/** @brief Checks whether the specified IRDA interrupt has occurred or not.
- * @param __HANDLE__: specifies the IRDA Handle.
- * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
- * UART peripheral
- * @param __IT__: specifies the IRDA interrupt source to check.
- * This parameter can be one of the following values:
- * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
- * @arg IRDA_IT_TC: Transmission complete interrupt
- * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
- * @arg IRDA_IT_IDLE: Idle line detection interrupt
- * @arg IRDA_IT_ORE: OverRun Error interrupt
- * @arg IRDA_IT_NE: Noise Error interrupt
- * @arg IRDA_IT_FE: Framing Error interrupt
- * @arg IRDA_IT_PE: Parity Error interrupt
- * @retval The new state of __IT__ (TRUE or FALSE).
- */
-#define __HAL_IRDA_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1U << ((__IT__)>> 0x08)))
-
-/** @brief Checks whether the specified IRDA interrupt source is enabled.
- * @param __HANDLE__: specifies the IRDA Handle.
- * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
- * UART peripheral
- * @param __IT__: specifies the IRDA interrupt source to check.
- * This parameter can be one of the following values:
- * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt
- * @arg IRDA_IT_TC: Transmission complete interrupt
- * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt
- * @arg IRDA_IT_IDLE: Idle line detection interrupt
- * @arg IRDA_IT_ORE: OverRun Error interrupt
- * @arg IRDA_IT_NE: Noise Error interrupt
- * @arg IRDA_IT_FE: Framing Error interrupt
- * @arg IRDA_IT_PE: Parity Error interrupt
- * @retval The new state of __IT__ (TRUE or FALSE).
- */
-#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5U) == 2)? \
- (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & IRDA_IT_MASK)))
-
-
-/** @brief Clears the specified IRDA ISR flag, in setting the proper ICR register flag.
- * @param __HANDLE__: specifies the IRDA Handle.
- * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
- * UART peripheral
- * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
- * to clear the corresponding interrupt
- * This parameter can be one of the following values:
- * @arg IRDA_CLEAR_PEF: Parity Error Clear Flag
- * @arg IRDA_CLEAR_FEF: Framing Error Clear Flag
- * @arg IRDA_CLEAR_NEF: Noise detected Clear Flag
- * @arg IRDA_CLEAR_OREF: OverRun Error Clear Flag
- * @arg IRDA_CLEAR_TCF: Transmission Complete Clear Flag
- * @retval None
- */
-#define __HAL_IRDA_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
-
-
-/** @brief Set a specific IRDA request flag.
- * @param __HANDLE__: specifies the IRDA Handle.
- * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
- * UART peripheral
- * @param __REQ__: specifies the request flag to set
- * This parameter can be one of the following values:
- * @arg IRDA_AUTOBAUD_REQUEST: Auto-Baud Rate Request
- * @arg IRDA_RXDATA_FLUSH_REQUEST: Receive Data flush Request
- * @arg IRDA_TXDATA_FLUSH_REQUEST: Transmit data flush Request
- *
- * @retval None
- */
-#define __HAL_IRDA_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
-
-
-
-/** @brief Enable UART/USART associated to IRDA Handle
- * @param __HANDLE__: specifies the IRDA Handle.
- * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
- * UART peripheral
- * @retval None
- */
-#define __HAL_IRDA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
-
-/** @brief Disable UART/USART associated to IRDA Handle
- * @param __HANDLE__: specifies the IRDA Handle.
- * The Handle Instance can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
- * UART peripheral
- * @retval None
- */
-#define __HAL_IRDA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
-
-/** @brief Ensure that IRDA Baud rate is less or equal to maximum value
- * @param __BAUDRATE__: specifies the IRDA Baudrate set by the user.
- * @retval True or False
- */
-#define IS_IRDA_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 115201)
-
-/** @brief Ensure that IRDA prescaler value is strictly larger than 0
- * @param __PRESCALER__: specifies the IRDA prescaler value set by the user.
- * @retval True or False
- */
-#define IS_IRDA_PRESCALER(__PRESCALER__) ((__PRESCALER__) > 0)
-
-/**
- * @}
- */
-
-/* Include IRDA HAL Extended module */
-#include "stm32f3xx_hal_irda_ex.h"
-
-/* Exported functions --------------------------------------------------------*/
-
-/** @addtogroup IRDA_Exported_Functions IRDA Exported Functions
- * @{
- */
-
-/** @addtogroup IRDA_Exported_Functions_Group1 Initialization and de-initialization functions
- * @{
- */
-
-/* Initialization and de-initialization functions ****************************/
-HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda);
-HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda);
-void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda);
-void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda);
-
-/**
- * @}
- */
-
-/** @addtogroup IRDA_Exported_Functions_Group2 Input and Output operation functions
- * @{
- */
-
-/* IO operation functions *****************************************************/
-HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
-HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size);
-void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda);
-void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda);
-void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda);
-void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda);
-
-/**
- * @}
- */
-
-/** @addtogroup IRDA_Exported_Functions_Group3 Peripheral State and Errors functions
- * @{
- */
-
-/* Peripheral State and Error functions ***************************************/
-HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda);
-uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda);
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F3xx_HAL_IRDA_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/