Diff: TARGET_NUCLEO_F303RE/stm32f3xx_hal_i2s_ex.h

Revision:

97:4298809c7c9e

Parent:

96:487b796308b0

--- a/TARGET_NUCLEO_F303RE/stm32f3xx_hal_i2s_ex.h	Tue Mar 17 14:27:45 2015 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,225 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f3xx_hal_i2s_ex.h
-  * @author  MCD Application Team
-  * @version V1.1.0
-  * @date    12-Sept-2014
-  * @brief   Header file of I2S HAL Extended module.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F3xx_HAL_I2S_EX_H
-#define __STM32F3xx_HAL_I2S_EX_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
-    defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx) || \
-    defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
-    defined(STM32F373xC) || defined(STM32F378xx)
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f3xx_hal_def.h"  
-
-/** @addtogroup STM32F3xx_HAL_Driver
-  * @{
-  */
-
-/** @addtogroup I2SEx I2S Extended HAL module driver
-  * @{
-  */ 
-
-/* Exported types ------------------------------------------------------------*/ 
-/* Exported constants --------------------------------------------------------*/  
-/* Exported macros ------------------------------------------------------------*/ 
-/** @defgroup I2SEx_Exported_Macros I2S Extended Exported Macros
-  * @{
-  */
-#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
-    defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
-#define I2SxEXT(__INSTANCE__) ((__INSTANCE__) == (SPI2)? (SPI_TypeDef *)(I2S2ext_BASE): (SPI_TypeDef *)(I2S3ext_BASE))
-
-/** @brief  Enable or disable the specified I2SExt peripheral.
-  * @param  __HANDLE__: specifies the I2S Handle. 
-  * @retval None
-  */
-#define __HAL_I2SEXT_ENABLE(__HANDLE__) (I2SxEXT((__HANDLE__)->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE)
-#define __HAL_I2SEXT_DISABLE(__HANDLE__) (I2SxEXT((__HANDLE__)->Instance)->I2SCFGR &= ~SPI_I2SCFGR_I2SE)
-
-/** @brief  Enable or disable the specified I2SExt interrupts.
-  * @param  __HANDLE__: specifies the I2S Handle.
-  * @param  __INTERRUPT__: specifies the interrupt source to enable or disable.
-  *        This parameter can be one of the following values:
-  *            @arg I2S_IT_TXE: Tx buffer empty interrupt enable
-  *            @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
-  *            @arg I2S_IT_ERR: Error interrupt enable
-  * @retval None
-  */  
-#define __HAL_I2SEXT_ENABLE_IT(__HANDLE__, __INTERRUPT__) (I2SxEXT((__HANDLE__)->Instance)->CR2 |= (__INTERRUPT__))
-#define __HAL_I2SEXT_DISABLE_IT(__HANDLE__, __INTERRUPT__) (I2SxEXT((__HANDLE__)->Instance)->CR2 &= ~(__INTERRUPT__))
-
-/** @brief  Checks if the specified I2SExt interrupt source is enabled or disabled.
-  * @param  __HANDLE__: specifies the I2S Handle.
-  *         This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral.
-  * @param  __INTERRUPT__: specifies the I2S interrupt source to check.
-  *          This parameter can be one of the following values:
-  *            @arg I2S_IT_TXE: Tx buffer empty interrupt enable
-  *            @arg I2S_IT_RXNE: RX buffer not empty interrupt enable
-  *            @arg I2S_IT_ERR: Error interrupt enable
-  * @retval The new state of __IT__ (TRUE or FALSE).
-  */
-#define __HAL_I2SEXT_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((I2SxEXT((__HANDLE__)->Instance)->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
-
-/** @brief  Checks whether the specified I2SExt flag is set or not.
-  * @param  __HANDLE__: specifies the I2S Handle.
-  * @param  __FLAG__: specifies the flag to check.
-  *        This parameter can be one of the following values:
-  *            @arg I2S_FLAG_RXNE: Receive buffer not empty flag
-  *            @arg I2S_FLAG_TXE: Transmit buffer empty flag
-  *            @arg I2S_FLAG_UDR: Underrun flag
-  *            @arg I2S_FLAG_OVR: Overrun flag
-  *            @arg I2S_FLAG_FRE: Frame error flag
-  *            @arg I2S_FLAG_CHSIDE: Channel Side flag
-  *            @arg I2S_FLAG_BSY: Busy flag
-  * @retval The new state of __FLAG__ (TRUE or FALSE).
-  */
-#define __HAL_I2SEXT_GET_FLAG(__HANDLE__, __FLAG__) (((I2SxEXT((__HANDLE__)->Instance)->SR) & (__FLAG__)) == (__FLAG__))
-
-/** @brief Clears the I2SExt OVR pending flag.
-  * @param  __HANDLE__: specifies the I2S Handle.
-  * @retval None
-  */                                                                                                   
-#define __HAL_I2SEXT_CLEAR_OVRFLAG(__HANDLE__) do{(I2SxEXT((__HANDLE__)->Instance)->DR;\
-                                                  (I2SxEXT((__HANDLE__)->Instance)->SR;}while(0)
-/** @brief Clears the I2SExt UDR pending flag.
-  * @param  __HANDLE__: specifies the I2S Handle.
-  * @retval None
-  */                                                                                                   
-#define __HAL_I2SEXT_CLEAR_UDRFLAG(__HANDLE__)(I2SxEXT((__HANDLE__)->Instance)->SR)    
-#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
-       /* STM32F302xC || STM32F303xC || STM32F358xx */
- /**
-  * @}
-  */
-
-
-/* Exported functions --------------------------------------------------------*/
-/* Initialization/de-initialization functions  ********************************/
-/** @addtogroup I2SEx_Exported_Functions I2S Extended Exported Functions
-  * @{
-  */
-
-#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
-    defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
-/** @addtogroup I2SEx_Exported_Functions_Group1 Extended features functions 
-  * @{
-  */
-
-/* Extended features functions ************************************************/
- /* Blocking mode: Polling */
-HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size, uint32_t Timeout);
-/* Non-Blocking mode: Interrupt */
-HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size);
-/* Non-Blocking mode: DMA */
-HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size);
-/**
-  * @}
-  */
-#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
-       /* STM32F302xC || STM32F303xC || STM32F358xx */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/** @addtogroup I2S I2S HAL module driver
-  * @{
-  */ 
-
-/** @addtogroup I2S_Exported_Functions I2S Exported Functions
-  * @{
-  */
-#if defined(STM32F302xE) || defined(STM32F303xE) || defined(STM32F398xx) || \
-    defined(STM32F302xC) || defined(STM32F303xC) || defined(STM32F358xx)
-/** @addtogroup  I2S_Exported_Functions_Group2 Input and Output operation functions
-  * @{
-  */
-/* I2S IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */
-void HAL_I2S_FullDuplex_IRQHandler(I2S_HandleTypeDef *hi2s);
-void HAL_I2S_TxRxCpltCallback(I2S_HandleTypeDef *hi2s);
-/**
-  * @}
-  */
-#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
-       /* STM32F302xC || STM32F303xC || STM32F358xx */
-
-/** @addtogroup I2S_Exported_Functions_Group3 Peripheral State and Errors functions
-  * @{
-  */
-/* Peripheral Control and State functions  ************************************/
-HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s);
-HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s);
-HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s);
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */
-#endif /* STM32F302xE || STM32F303xE || STM32F398xx || */
-       /* STM32F302xC || STM32F303xC || STM32F358xx || */
-       /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
-       /* STM32F373xC || STM32F378xx                   */
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* __STM32F3xx_HAL_I2S_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/