Diff: TARGET_NUCLEO_F303RE/stm32f3xx_hal_gpio.h

Revision:

97:4298809c7c9e

Parent:

96:487b796308b0

--- a/TARGET_NUCLEO_F303RE/stm32f3xx_hal_gpio.h	Tue Mar 17 14:27:45 2015 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,307 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f3xx_hal_gpio.h
-  * @author  MCD Application Team
-  * @version V1.1.0
-  * @date    12-Sept-2014
-  * @brief   Header file of GPIO HAL module.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************  
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F3xx_HAL_GPIO_H
-#define __STM32F3xx_HAL_GPIO_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f3xx_hal_def.h"
-
-/** @addtogroup STM32F3xx_HAL_Driver
-  * @{
-  */
-
-/** @addtogroup GPIO GPIO HAL module driver
-  * @{
-  */ 
-
-/* Exported types ------------------------------------------------------------*/ 
-/** @defgroup GPIO_Exported_Types GPIO Exported Types
-  * @{
-  */
-
-/** 
-  * @brief   GPIO Init structure definition  
-  */
-typedef struct
-{
-  uint32_t Pin;       /*!< Specifies the GPIO pins to be configured.
-                           This parameter can be any value of @ref GPIO_pins_define */
-
-  uint32_t Mode;      /*!< Specifies the operating mode for the selected pins.
-                           This parameter can be a value of @ref GPIO_mode_define */
-
-  uint32_t Pull;      /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
-                           This parameter can be a value of @ref GPIO_pull_define */
-
-  uint32_t Speed;     /*!< Specifies the speed for the selected pins.
-                           This parameter can be a value of @ref GPIO_speed_define */
-
-  uint32_t Alternate;  /*!< Peripheral to be connected to the selected pins 
-                            This parameter can be a value of @ref GPIOEx_Alternate_function_selection */
-}GPIO_InitTypeDef;
-
-/** 
-  * @brief  GPIO Bit SET and Bit RESET enumeration 
-  */
-typedef enum
-{
-  GPIO_PIN_RESET = 0,
-  GPIO_PIN_SET
-}GPIO_PinState;
-#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET))
-
-/**
-  * @}
-  */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup GPIO_Exported_Constants GPIO Exported Constants
-  * @{
-  */
-
-/** @defgroup GPIO_pins_define GPIO pins define
-  * @{
-  */
-#define GPIO_PIN_0                 ((uint16_t)0x0001)  /* Pin 0 selected    */
-#define GPIO_PIN_1                 ((uint16_t)0x0002)  /* Pin 1 selected    */
-#define GPIO_PIN_2                 ((uint16_t)0x0004)  /* Pin 2 selected    */
-#define GPIO_PIN_3                 ((uint16_t)0x0008)  /* Pin 3 selected    */
-#define GPIO_PIN_4                 ((uint16_t)0x0010)  /* Pin 4 selected    */
-#define GPIO_PIN_5                 ((uint16_t)0x0020)  /* Pin 5 selected    */
-#define GPIO_PIN_6                 ((uint16_t)0x0040)  /* Pin 6 selected    */
-#define GPIO_PIN_7                 ((uint16_t)0x0080)  /* Pin 7 selected    */
-#define GPIO_PIN_8                 ((uint16_t)0x0100)  /* Pin 8 selected    */
-#define GPIO_PIN_9                 ((uint16_t)0x0200)  /* Pin 9 selected    */
-#define GPIO_PIN_10                ((uint16_t)0x0400)  /* Pin 10 selected   */
-#define GPIO_PIN_11                ((uint16_t)0x0800)  /* Pin 11 selected   */
-#define GPIO_PIN_12                ((uint16_t)0x1000)  /* Pin 12 selected   */
-#define GPIO_PIN_13                ((uint16_t)0x2000)  /* Pin 13 selected   */
-#define GPIO_PIN_14                ((uint16_t)0x4000)  /* Pin 14 selected   */
-#define GPIO_PIN_15                ((uint16_t)0x8000)  /* Pin 15 selected   */
-#define GPIO_PIN_All               ((uint16_t)0xFFFF)  /* All pins selected */
-
-#define GPIO_PIN_MASK              ((uint32_t)0x0000FFFF) /* PIN mask for assert test */
-
-#define IS_GPIO_PIN(PIN)           (((PIN) & GPIO_PIN_MASK) != (uint32_t)0x00)
-/**
-  * @}
-  */
-
-/** @defgroup GPIO_mode_define GPIO mode define
-  * @brief GPIO Configuration Mode 
-  *        Elements values convention: 0xX0yz00YZ
-  *           - X  : GPIO mode or EXTI Mode
-  *           - y  : External IT or Event trigger detection 
-  *           - z  : IO configuration on External IT or Event
-  *           - Y  : Output type (Push Pull or Open Drain)
-  *           - Z  : IO Direction mode (Input, Output, Alternate or Analog)
-  * @{
-  */ 
-#define  GPIO_MODE_INPUT                        ((uint32_t)0x00000000)   /*!< Input Floating Mode                   */
-#define  GPIO_MODE_OUTPUT_PP                    ((uint32_t)0x00000001)   /*!< Output Push Pull Mode                 */
-#define  GPIO_MODE_OUTPUT_OD                    ((uint32_t)0x00000011)   /*!< Output Open Drain Mode                */
-#define  GPIO_MODE_AF_PP                        ((uint32_t)0x00000002)   /*!< Alternate Function Push Pull Mode     */
-#define  GPIO_MODE_AF_OD                        ((uint32_t)0x00000012)   /*!< Alternate Function Open Drain Mode    */
-
-#define  GPIO_MODE_ANALOG                       ((uint32_t)0x00000003)   /*!< Analog Mode  */
-    
-#define  GPIO_MODE_IT_RISING                    ((uint32_t)0x10110000)   /*!< External Interrupt Mode with Rising edge trigger detection          */
-#define  GPIO_MODE_IT_FALLING                   ((uint32_t)0x10210000)   /*!< External Interrupt Mode with Falling edge trigger detection         */
-#define  GPIO_MODE_IT_RISING_FALLING            ((uint32_t)0x10310000)   /*!< External Interrupt Mode with Rising/Falling edge trigger detection  */
-
-#define  GPIO_MODE_EVT_RISING                   ((uint32_t)0x10120000)   /*!< External Event Mode with Rising edge trigger detection               */
-#define  GPIO_MODE_EVT_FALLING                  ((uint32_t)0x10220000)   /*!< External Event Mode with Falling edge trigger detection              */
-#define  GPIO_MODE_EVT_RISING_FALLING           ((uint32_t)0x10320000)   /*!< External Event Mode with Rising/Falling edge trigger detection       */
-  
-#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT)              ||\
-                            ((MODE) == GPIO_MODE_OUTPUT_PP)          ||\
-                            ((MODE) == GPIO_MODE_OUTPUT_OD)          ||\
-                            ((MODE) == GPIO_MODE_AF_PP)              ||\
-                            ((MODE) == GPIO_MODE_AF_OD)              ||\
-                            ((MODE) == GPIO_MODE_IT_RISING)          ||\
-                            ((MODE) == GPIO_MODE_IT_FALLING)         ||\
-                            ((MODE) == GPIO_MODE_IT_RISING_FALLING)  ||\
-                            ((MODE) == GPIO_MODE_EVT_RISING)         ||\
-                            ((MODE) == GPIO_MODE_EVT_FALLING)        ||\
-                            ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\
-                            ((MODE) == GPIO_MODE_ANALOG))
-
-/**
-  * @}
-  */
-                                                         
-/** @defgroup GPIO_speed_define GPIO speed define
-  * @brief GPIO Output Maximum frequency
-  * @{
-  */  
-#define  GPIO_SPEED_LOW         ((uint32_t)0x00000000)  /*!< Low speed     */
-#define  GPIO_SPEED_MEDIUM      ((uint32_t)0x00000001)  /*!< Medium speed  */
-#define  GPIO_SPEED_HIGH        ((uint32_t)0x00000003)  /*!< High speed    */
-
-#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_LOW)  || ((SPEED) == GPIO_SPEED_MEDIUM) || \
-                              ((SPEED) == GPIO_SPEED_HIGH))
-/**
-  * @}
-  */
-
- /** @defgroup GPIO_pull_define GPIO pull define
-   * @brief GPIO Pull-Up or Pull-Down Activation
-   * @{
-   */  
-#define  GPIO_NOPULL        ((uint32_t)0x00000000)   /*!< No Pull-up or Pull-down activation  */
-#define  GPIO_PULLUP        ((uint32_t)0x00000001)   /*!< Pull-up activation                  */
-#define  GPIO_PULLDOWN      ((uint32_t)0x00000002)   /*!< Pull-down activation                */
-
-#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \
-                            ((PULL) == GPIO_PULLDOWN))
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/* Exported macros -----------------------------------------------------------*/
-/** @defgroup GPIO_Exported_Macros GPIO Exported Macros
-  * @{
-  */
-
-/**
-  * @brief  Checks whether the specified EXTI line flag is set or not.
-  * @param  __EXTI_LINE__: specifies the EXTI line flag to check.
-  *         This parameter can be GPIO_PIN_x where x can be(0..15)
-  * @retval The new state of __EXTI_LINE__ (SET or RESET).
-  */
-#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
-
-/**
-  * @brief  Clears the EXTI's line pending flags.
-  * @param  __EXTI_LINE__: specifies the EXTI lines flags to clear.
-  *         This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
-  * @retval None
-  */
-#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
-
-/**
-  * @brief  Checks whether the specified EXTI line is asserted or not.
-  * @param  __EXTI_LINE__: specifies the EXTI line to check.
-  *          This parameter can be GPIO_PIN_x where x can be(0..15)
-  * @retval The new state of __EXTI_LINE__ (SET or RESET).
-  */
-#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__))
-
-/**
-  * @brief  Clears the EXTI's line pending bits.
-  * @param  __EXTI_LINE__: specifies the EXTI lines to clear.
-  *          This parameter can be any combination of GPIO_PIN_x where x can be (0..15)
-  * @retval None
-  */
-#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__))
-
-/**
-  * @brief  Generates a Software interrupt on selected EXTI line.
-  * @param  __EXTI_LINE__: specifies the EXTI line to check.
-  *          This parameter can be GPIO_PIN_x where x can be(0..15)
-  * @retval None
-  */
-#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__))
-
-/**
-  * @}
-  */
-
-/* Include GPIO HAL Extended module */
-#include "stm32f3xx_hal_gpio_ex.h"
-
-/* Exported functions --------------------------------------------------------*/ 
-/** @addtogroup GPIO_Exported_Functions GPIO Exported Functions
-* @{
-*/
-
-/** @addtogroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions
-* @{
-*/
-/* Initialization and de-initialization functions *****************************/
-void              HAL_GPIO_Init(GPIO_TypeDef  *GPIOx, GPIO_InitTypeDef *GPIO_Init);
-void              HAL_GPIO_DeInit(GPIO_TypeDef  *GPIOx, uint32_t GPIO_Pin);
-
-/**
-  * @}
-  */
-
-/** @addtogroup GPIO_Exported_Functions_Group2 Input and Output operation functions
-* @{
-*/
-/* IO operation functions *****************************************************/
-GPIO_PinState     HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-void              HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState);
-void              HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
-void              HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin);
-void              HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin);
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F3xx_HAL_GPIO_H */
-
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/