Diff: TARGET_NUCLEO_F303RE/stm32f3xx_hal_crc.h

Revision:

97:4298809c7c9e

Parent:

96:487b796308b0

--- a/TARGET_NUCLEO_F303RE/stm32f3xx_hal_crc.h	Tue Mar 17 14:27:45 2015 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,347 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f3xx_hal_crc.h
-  * @author  MCD Application Team
-  * @version V1.1.0
-  * @date    12-Sept-2014
-  * @brief   Header file of CRC HAL module.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************  
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F3xx_HAL_CRC_H
-#define __STM32F3xx_HAL_CRC_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f3xx_hal_def.h"
-
-/** @addtogroup STM32F3xx_HAL_Driver
-  * @{
-  */
-
-/** @addtogroup CRC
-  * @{
-  */ 
-
-/* Exported types ------------------------------------------------------------*/ 
-/** @defgroup CRC_Exported_Types CRC Exported Types
-  * @{
-  */
-  
-/** 
-  * @brief  CRC HAL State Structure definition  
-  */ 
-typedef enum
-{                                            
-  HAL_CRC_STATE_RESET     = 0x00,  /*!< CRC not yet initialized or disabled */
-  HAL_CRC_STATE_READY     = 0x01,  /*!< CRC initialized and ready for use   */
-  HAL_CRC_STATE_BUSY      = 0x02,  /*!< CRC internal process is ongoing     */
-  HAL_CRC_STATE_TIMEOUT   = 0x03,  /*!< CRC timeout state                   */
-  HAL_CRC_STATE_ERROR     = 0x04   /*!< CRC error state                     */
-}HAL_CRC_StateTypeDef;
-
-
-/** 
-  * @brief CRC Init Structure definition  
-  */ 
-typedef struct
-{
-  uint8_t DefaultPolynomialUse;       /*!< This parameter is a value of @ref CRC_Default_Polynomial and indicates if default polynomial is used.  
-                                            If set to DEFAULT_POLYNOMIAL_ENABLE, resort to default 
-                                            X^32 + X^26 + X^23 + X^22 + X^16 + X^12 + X^11 + X^10 +X^8 + X^7 + X^5 + X^4 + X^2+ X +1. 
-                                            In that case, there is no need to set GeneratingPolynomial field.
-                                            If otherwise set to DEFAULT_POLYNOMIAL_DISABLE, GeneratingPolynomial and CRCLength fields must be set */
-
-  uint8_t DefaultInitValueUse;        /*!< This parameter is a value of @ref CRC_Default_InitValue_Use and indicates if default init value is used. 
-                                           If set to DEFAULT_INIT_VALUE_ENABLE, resort to default
-                                           0xFFFFFFFF value. In that case, there is no need to set InitValue field.   
-                                           If otherwise set to DEFAULT_INIT_VALUE_DISABLE,  InitValue field must be set */
-
-  uint32_t GeneratingPolynomial;      /*!< Set CRC generating polynomial. 7, 8, 16 or 32-bit long value for a polynomial degree
-                                           respectively equal to 7, 8, 16 or 32. This field is written in normal representation, 
-                                           e.g., for a polynomial of degree 7, X^7 + X^6 + X^5 + X^2 + 1 is written 0x65.
-                                           No need to specify it if DefaultPolynomialUse is set to DEFAULT_POLYNOMIAL_ENABLE   */                                                
-
-  uint32_t CRCLength;                 /*!< This parameter is a value of @ref CRC_Polynomial_Size_Definitions and indicates CRC length.
-                                           Value can be either one of
-                                           CRC_POLYLENGTH_32B                  (32-bit CRC)
-                                           CRC_POLYLENGTH_16B                  (16-bit CRC)
-                                           CRC_POLYLENGTH_8B                   (8-bit CRC)
-                                           CRC_POLYLENGTH_7B                   (7-bit CRC) */
-                                              
-  uint32_t InitValue;                 /*!< Init value to initiate CRC computation. No need to specify it if DefaultInitValueUse 
-                                           is set to DEFAULT_INIT_VALUE_ENABLE   */                                                
-  
-  uint32_t InputDataInversionMode;    /*!< This parameter is a value of @ref CRCEx_Input_Data_Inversion and specifies input data inversion mode. 
-                                           Can be either one of the following values 
-                                           CRC_INPUTDATA_INVERSION_NONE      no input data inversion
-                                           CRC_INPUTDATA_INVERSION_BYTE      byte-wise inversion, 0x1A2B3C4D becomes 0x58D43CB2
-                                           CRC_INPUTDATA_INVERSION_HALFWORD  halfword-wise inversion, 0x1A2B3C4D becomes 0xD458B23C
-                                           CRC_INPUTDATA_INVERSION_WORD      word-wise inversion, 0x1A2B3C4D becomes 0xB23CD458 */  
-                                              
-  uint32_t OutputDataInversionMode;   /*!< This parameter is a value of @ref CRCEx_Output_Data_Inversion and specifies output data (i.e. CRC) inversion mode.
-                                            Can be either 
-                                            CRC_OUTPUTDATA_INVERSION_DISABLED   no CRC inversion, or 
-                                            CRC_OUTPUTDATA_INVERSION_ENABLED    CRC 0x11223344 is converted into 0x22CC4488 */                                           
-}CRC_InitTypeDef;
-
-
-/** 
-  * @brief  CRC Handle Structure definition  
-  */ 
-typedef struct
-{
-  CRC_TypeDef                 *Instance;   /*!< Register base address        */ 
-  
-  CRC_InitTypeDef             Init;        /*!< CRC configuration parameters */
-  
-  HAL_LockTypeDef             Lock;        /*!< CRC Locking object           */
-    
-  __IO HAL_CRC_StateTypeDef   State;       /*!< CRC communication state      */
-  
-  uint32_t InputDataFormat;                /*!< This parameter is a value of @ref CRC_Input_Buffer_Format and specifies input data format. 
-                                            Can be either 
-                                            CRC_INPUTDATA_FORMAT_BYTES       input data is a stream of bytes (8-bit data)
-                                            CRC_INPUTDATA_FORMAT_HALFWORDS   input data is a stream of half-words (16-bit data)
-                                            CRC_INPUTDATA_FORMAT_WORDS       input data is a stream of words (32-bits data)                                                                                        
-                                           Note that constant CRC_INPUT_FORMAT_UNDEFINED is defined but an initialization error
-                                           must occur if InputBufferFormat is not one of the three values listed above  */ 
-}CRC_HandleTypeDef;
-
-/**
-  * @}
-  */
-  
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup CRC_Exported_Constants CRC Exported Constants
-  * @{
-  */
-  
-/** @defgroup CRC_Default_Polynomial_Value    Default CRC generating polynomial
-  * @{
-  */
-#define DEFAULT_CRC32_POLY      0x04C11DB7
-
-/**
-  * @}
-  */
-
-/** @defgroup CRC_Default_InitValue    Default CRC computation initialization value
-  * @{
-  */
-#define DEFAULT_CRC_INITVALUE   0xFFFFFFFF
-
-/**
-  * @}
-  */
-
-/** @defgroup CRC_Default_Polynomial    Indicates whether or not default polynomial is used
-  * @{
-  */
-#define DEFAULT_POLYNOMIAL_ENABLE       ((uint8_t)0x00)
-#define DEFAULT_POLYNOMIAL_DISABLE      ((uint8_t)0x01)
-
-#define IS_DEFAULT_POLYNOMIAL(DEFAULT) (((DEFAULT) == DEFAULT_POLYNOMIAL_ENABLE) || \
-                                        ((DEFAULT) == DEFAULT_POLYNOMIAL_DISABLE))
-
-/**
-  * @}
-  */
- 
-/** @defgroup CRC_Default_InitValue_Use    Indicates whether or not default init value is used
-  * @{
-  */                                      
-#define DEFAULT_INIT_VALUE_ENABLE      ((uint8_t)0x00)
-#define DEFAULT_INIT_VALUE_DISABLE     ((uint8_t)0x01)
-
-#define IS_DEFAULT_INIT_VALUE(VALUE)  (((VALUE) == DEFAULT_INIT_VALUE_ENABLE) || \
-                                       ((VALUE) == DEFAULT_INIT_VALUE_DISABLE))                                     
-
-/**
-  * @}
-  */
-
-/** @defgroup CRC_Polynomial_Sizes Polynomial sizes to configure the IP
-  * @{
-  */
-#define CRC_POLYLENGTH_32B                  ((uint32_t)0x00000000)
-#define CRC_POLYLENGTH_16B                  ((uint32_t)CRC_CR_POLYSIZE_0)
-#define CRC_POLYLENGTH_8B                   ((uint32_t)CRC_CR_POLYSIZE_1)
-#define CRC_POLYLENGTH_7B                   ((uint32_t)CRC_CR_POLYSIZE)
-#define IS_CRC_POL_LENGTH(LENGTH)     (((LENGTH) == CRC_POLYLENGTH_32B) || \
-                                       ((LENGTH) == CRC_POLYLENGTH_16B) || \
-                                       ((LENGTH) == CRC_POLYLENGTH_8B)  || \
-                                       ((LENGTH) == CRC_POLYLENGTH_7B))  
-/**
-  * @}
-  */
-
-/** @defgroup CRC_Polynomial_Size_Definitions CRC polynomial possible sizes actual definitions
-  * @{
-  */
-#define HAL_CRC_LENGTH_32B     32
-#define HAL_CRC_LENGTH_16B     16
-#define HAL_CRC_LENGTH_8B       8
-#define HAL_CRC_LENGTH_7B       7
-
-/**
-  * @}
-  */  
-
-/** @defgroup CRC_Input_Buffer_Format Input Buffer Format
-  * @{
-  */
-/* WARNING: CRC_INPUT_FORMAT_UNDEFINED is created for reference purposes but
- * an error is triggered in HAL_CRC_Init() if InputDataFormat field is set 
- * to CRC_INPUT_FORMAT_UNDEFINED: the format MUST be defined by the user for 
- * the CRC APIs to provide a correct result */   
-#define CRC_INPUTDATA_FORMAT_UNDEFINED             ((uint32_t)0x00000000)
-#define CRC_INPUTDATA_FORMAT_BYTES                 ((uint32_t)0x00000001)
-#define CRC_INPUTDATA_FORMAT_HALFWORDS             ((uint32_t)0x00000002)
-#define CRC_INPUTDATA_FORMAT_WORDS                 ((uint32_t)0x00000003)
-
-#define IS_CRC_INPUTDATA_FORMAT(FORMAT)           (((FORMAT) == CRC_INPUTDATA_FORMAT_BYTES) || \
-                                                   ((FORMAT) == CRC_INPUTDATA_FORMAT_HALFWORDS) || \
-                                                   ((FORMAT) == CRC_INPUTDATA_FORMAT_WORDS))                                                  
-/**                                               
-  * @}
-  */   
-
-/**
-  * @}
-  */
-  
-/* Exported macros -----------------------------------------------------------*/
-
-/** @defgroup CRC_Exported_Macros CRC Exported Macros
-  * @{
-  */
-
-/** @brief Reset CRC handle state
-  * @param  __HANDLE__: CRC handle.
-  * @retval None
-  */
-#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET)
-
-/**
-  * @brief  Reset CRC Data Register.
-  * @param  __HANDLE__: CRC handle
-  * @retval None.
-  */
-#define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET)
-
-/**
-  * @brief  Set CRC INIT non-default value
-  * @param  __HANDLE__    : CRC handle
-  * @param  __INIT__      : 32-bit initial value  
-  * @retval None.
-  */
-#define __HAL_CRC_INITIALCRCVALUE_CONFIG(__HANDLE__, __INIT__) ((__HANDLE__)->Instance->INIT = (__INIT__))    
-
-/**
-  * @}
-  */
-
-
-/* Include CRC HAL Extended module */
-#include "stm32f3xx_hal_crc_ex.h"
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup CRC_Exported_Functions CRC Exported Functions
-  * @{
-  */
-  
-/** @addtogroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions
- *  @brief    Initialization and Configuration functions. 
- * @{
- */
-/* Initialization and de-initialization functions  ****************************/
-HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc);
-HAL_StatusTypeDef HAL_CRC_DeInit (CRC_HandleTypeDef *hcrc);
-void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc);
-void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc);
-/**
-  * @}
-  */
-  
-/** @addtogroup CRC_Exported_Functions_Group2 Peripheral Control functions 
- *  @brief    management functions. 
- * @{
- */
-/* Peripheral Control functions ***********************************************/
-uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
-uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength);
-/**
-  * @}
-  */
-  
-/** @addtogroup CRC_Exported_Functions_Group3 Peripheral State functions 
- *  @brief    Peripheral State functions. 
- * @{
- */
-/* Peripheral State and Error functions ***************************************/
-HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc);
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-  /** @defgroup HAL_CRC_Alias_Exported_Functions CRC aliases for Exported Functions 
- * @{
- */
-/* Aliases for inter STM32 series compatibility */
-#define HAL_CRC_Input_Data_Reverse   HAL_CRCEx_Input_Data_Reverse
-#define HAL_CRC_Output_Data_Reverse  HAL_CRCEx_Output_Data_Reverse
-/**
-  * @}
-  */
-  
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F3xx_HAL_CRC_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/