Diff: TARGET_NUCLEO_F103RB/stm32f1xx_hal_can_ex.h

Revision:

97:4298809c7c9e

Parent:

96:487b796308b0

--- a/TARGET_NUCLEO_F103RB/stm32f1xx_hal_can_ex.h	Tue Mar 17 14:27:45 2015 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,147 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f1xx_hal_can_ex.h
-  * @author  MCD Application Team
-  * @version V1.0.0
-  * @date    15-December-2014
-  * @brief   Header file of CAN HAL Extension module.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F1xx_HAL_CAN_EX_H
-#define __STM32F1xx_HAL_CAN_EX_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#if defined(STM32F103x6) || defined(STM32F103xB) || defined(STM32F103xE) || \
-    defined(STM32F103xG) || defined(STM32F105xC) || defined(STM32F107xC)
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f1xx_hal_def.h"
-
-/** @addtogroup STM32F1xx_HAL_Driver
-  * @{
-  */
-
-/** @defgroup CANEx CANEx
-  * @{
-  */ 
-
-/* Exported types ------------------------------------------------------------*/
-      
-/** 
-  * @brief  CAN filter configuration structure definition
-  */
-/* CAN filter banks differences over STM32F1 devices:                         */
-/* - STM32F1 Connectivity line: 28 filter banks shared between CAN1 and CAN2  */
-/* - Other STM32F10x devices:   14 filter banks                               */
-
-typedef struct
-{
-  uint32_t FilterIdHigh;          /*!< Specifies the filter identification number (MSBs for a 32-bit
-                                       configuration, first one for a 16-bit configuration).
-                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ 
-                                              
-  uint32_t FilterIdLow;           /*!< Specifies the filter identification number (LSBs for a 32-bit
-                                       configuration, second one for a 16-bit configuration).
-                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ 
-
-  uint32_t FilterMaskIdHigh;      /*!< Specifies the filter mask number or identification number,
-                                       according to the mode (MSBs for a 32-bit configuration,
-                                       first one for a 16-bit configuration).
-                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ 
-
-  uint32_t FilterMaskIdLow;       /*!< Specifies the filter mask number or identification number,
-                                       according to the mode (LSBs for a 32-bit configuration,
-                                       second one for a 16-bit configuration).
-                                       This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ 
-
-  uint32_t FilterFIFOAssignment;  /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter.
-                                       This parameter can be a value of @ref CAN_filter_FIFO */
-#if defined(STM32F105xC) || defined(STM32F107xC)
-  uint32_t FilterNumber;          /*!< Specifies the filter which will be initialized. 
-                                       This parameter must be a number between Min_Data = 0 and Max_Data = 27. */
-#else
-  uint32_t FilterNumber;          /*!< Specifies the filter which will be initialized. 
-                                       This parameter must be a number between Min_Data = 0 and Max_Data = 13. */
-#endif /* STM32F105xC || STM32F107xC */
-  uint32_t FilterMode;            /*!< Specifies the filter mode to be initialized.
-                                       This parameter can be a value of @ref CAN_filter_mode */
-
-  uint32_t FilterScale;           /*!< Specifies the filter scale.
-                                       This parameter can be a value of @ref CAN_filter_scale */
-
-  uint32_t FilterActivation;      /*!< Enable or disable the filter.
-                                       This parameter can be set to ENABLE or DISABLE. */
-                                       
-  uint32_t BankNumber;            /*!< Select the start slave bank filter
-                                       This parameter must be a number between Min_Data = 0 and Max_Data = 28. */ 
-  
-}CAN_FilterConfTypeDef;
-
-/* Exported constants --------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-
-/** @defgroup CANEx_Private_Macros CAN Extended Private Macros
-  * @{
-  */
-#if defined(STM32F105xC) || defined(STM32F107xC)
-#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27)
-#else
-#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 13)
-#endif /* STM32F105xC || STM32F107xC */
-
-/**
-  * @}
-  */
-
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */
-
-#endif /* STM32F103x6) || STM32F103xB || STM32F103xE || */
-       /* STM32F103xG) || STM32F105xC || STM32F107xC    */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F1xx_HAL_CAN_EX_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/