Filippo Casamassima
/
mbed
Important changes to repositories hosted on mbed.com
Mbed hosted mercurial repositories are deprecated and are due to be permanently deleted in July 2026.
To keep a copy of this software download the repository Zip archive or clone locally using Mercurial.
It is also possible to export all your personal repositories from the account settings page.
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F070RB/stm32f0xx_hal_usart.h
- Revision:
- 97:4298809c7c9e
- Parent:
- 96:487b796308b0
--- a/TARGET_NUCLEO_F070RB/stm32f0xx_hal_usart.h Tue Mar 17 14:27:45 2015 +0000
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,595 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f0xx_hal_usart.h
- * @author MCD Application Team
- * @version V1.2.0
- * @date 11-December-2014
- * @brief Header file of USART HAL module.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0xx_HAL_USART_H
-#define __STM32F0xx_HAL_USART_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal_def.h"
-
-/** @addtogroup STM32F0xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup USART
- * @{
- */
-
-/* Exported types ------------------------------------------------------------*/
-/** @defgroup USART_Exported_Types USART Exported Types
- * @{
- */
-
-
-/**
- * @brief USART Init Structure definition
- */
-typedef struct
-{
- uint32_t BaudRate; /*!< This member configures the Usart communication baud rate.
- The baud rate is computed using the following formula:
- Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate))) */
-
- uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
- This parameter can be a value of @ref USARTEx_Word_Length */
-
- uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
- This parameter can be a value of @ref USART_Stop_Bits */
-
- uint32_t Parity; /*!< Specifies the parity mode.
- This parameter can be a value of @ref USART_Parity
- @note When parity is enabled, the computed parity is inserted
- at the MSB position of the transmitted data (9th bit when
- the word length is set to 9 data bits; 8th bit when the
- word length is set to 8 data bits). */
-
- uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
- This parameter can be a value of @ref USART_Mode */
-
- uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock.
- This parameter can be a value of @ref USART_Clock_Polarity */
-
- uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made.
- This parameter can be a value of @ref USART_Clock_Phase */
-
- uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted
- data bit (MSB) has to be output on the SCLK pin in synchronous mode.
- This parameter can be a value of @ref USART_Last_Bit */
-}USART_InitTypeDef;
-
-/**
- * @brief HAL State structures definition
- */
-typedef enum
-{
- HAL_USART_STATE_RESET = 0x00, /*!< Peripheral is not initialized */
- HAL_USART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
- HAL_USART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
- HAL_USART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
- HAL_USART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
- HAL_USART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission Reception process is ongoing */
- HAL_USART_STATE_TIMEOUT = 0x03, /*!< Timeout state */
- HAL_USART_STATE_ERROR = 0x04 /*!< Error */
-}HAL_USART_StateTypeDef;
-
-/**
- * @brief USART clock sources definitions
- */
-typedef enum
-{
- USART_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */
- USART_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */
- USART_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */
- USART_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */
- USART_CLOCKSOURCE_UNDEFINED = 0x10 /*!< undefined clock source */
-}USART_ClockSourceTypeDef;
-
-/**
- * @brief USART handle Structure definition
- */
-typedef struct
-{
- USART_TypeDef *Instance; /*!< USART registers base address */
-
- USART_InitTypeDef Init; /*!< USART communication parameters */
-
- uint8_t *pTxBuffPtr; /*!< Pointer to USART Tx transfer Buffer */
-
- uint16_t TxXferSize; /*!< USART Tx Transfer size */
-
- uint16_t TxXferCount; /*!< USART Tx Transfer Counter */
-
- uint8_t *pRxBuffPtr; /*!< Pointer to USART Rx transfer Buffer */
-
- uint16_t RxXferSize; /*!< USART Rx Transfer size */
-
- uint16_t RxXferCount; /*!< USART Rx Transfer Counter */
-
- uint16_t Mask; /*!< USART Rx RDR register mask */
-
- DMA_HandleTypeDef *hdmatx; /*!< USART Tx DMA Handle parameters */
-
- DMA_HandleTypeDef *hdmarx; /*!< USART Rx DMA Handle parameters */
-
- HAL_LockTypeDef Lock; /*!< Locking object */
-
- HAL_USART_StateTypeDef State; /*!< USART communication state */
-
- __IO uint32_t ErrorCode; /*!< USART Error code
- This parameter can be a value of @ref USART_Error */
-
-}USART_HandleTypeDef;
-
-/**
- * @}
- */
-
-/* Exported constants --------------------------------------------------------*/
-/** @defgroup USART_Exported_Constants USART Exported constants
- * @{
- */
-
-/** @defgroup USART_Error USART Error
- * @{
- */
-#define HAL_USART_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
-#define HAL_USART_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */
-#define HAL_USART_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */
-#define HAL_USART_ERROR_FE ((uint32_t)0x00000004) /*!< frame error */
-#define HAL_USART_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */
-#define HAL_USART_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */
-/**
- * @}
- */
-
-/** @defgroup USART_Stop_Bits USART Number of Stop Bits
- * @{
- */
-#define USART_STOPBITS_1 ((uint32_t)0x0000)
-#define USART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
-#define USART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1))
-#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_STOPBITS_1) || \
- ((STOPBITS) == USART_STOPBITS_1_5) || \
- ((STOPBITS) == USART_STOPBITS_2))
-/**
- * @}
- */
-
-/** @defgroup USART_Parity USART Parity
- * @{
- */
-#define USART_PARITY_NONE ((uint32_t)0x0000)
-#define USART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
-#define USART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS))
-#define IS_USART_PARITY(PARITY) (((PARITY) == USART_PARITY_NONE) || \
- ((PARITY) == USART_PARITY_EVEN) || \
- ((PARITY) == USART_PARITY_ODD))
-/**
- * @}
- */
-
-/** @defgroup USART_Mode USART Mode
- * @{
- */
-#define USART_MODE_RX ((uint32_t)USART_CR1_RE)
-#define USART_MODE_TX ((uint32_t)USART_CR1_TE)
-#define USART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE))
-#define IS_USART_MODE(MODE) ((((MODE) & (uint32_t)0xFFFFFFF3) == 0x00) && ((MODE) != (uint32_t)0x00))
-/**
- * @}
- */
-
-/** @defgroup USART_Clock USART Clock
- * @{
- */
-#define USART_CLOCK_DISABLED ((uint32_t)0x0000)
-#define USART_CLOCK_ENABLED ((uint32_t)USART_CR2_CLKEN)
-#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_CLOCK_DISABLED) || \
- ((CLOCK) == USART_CLOCK_ENABLED))
-/**
- * @}
- */
-
-/** @defgroup USART_Clock_Polarity USART Clock Polarity
- * @{
- */
-#define USART_POLARITY_LOW ((uint32_t)0x0000)
-#define USART_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL)
-#define IS_USART_POLARITY(CPOL) (((CPOL) == USART_POLARITY_LOW) || ((CPOL) == USART_POLARITY_HIGH))
-/**
- * @}
- */
-
-/** @defgroup USART_Clock_Phase USART Clock Phase
- * @{
- */
-#define USART_PHASE_1EDGE ((uint32_t)0x0000)
-#define USART_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA)
-#define IS_USART_PHASE(CPHA) (((CPHA) == USART_PHASE_1EDGE) || ((CPHA) == USART_PHASE_2EDGE))
-/**
- * @}
- */
-
-/** @defgroup USART_Last_Bit USART Last Bit
- * @{
- */
-#define USART_LASTBIT_DISABLE ((uint32_t)0x0000)
-#define USART_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL)
-#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LASTBIT_DISABLE) || \
- ((LASTBIT) == USART_LASTBIT_ENABLE))
-/**
- * @}
- */
-
-
-/** @defgroup USART_Flags USART Flags
- * Elements values convention: 0xXXXX
- * - 0xXXXX : Flag mask in the ISR register
- * @{
- */
-#define USART_FLAG_REACK ((uint32_t)0x00400000)
-#define USART_FLAG_TEACK ((uint32_t)0x00200000)
-#define USART_FLAG_BUSY ((uint32_t)0x00010000)
-#define USART_FLAG_CTS ((uint32_t)0x00000400)
-#define USART_FLAG_CTSIF ((uint32_t)0x00000200)
-#define USART_FLAG_LBDF ((uint32_t)0x00000100)
-#define USART_FLAG_TXE ((uint32_t)0x00000080)
-#define USART_FLAG_TC ((uint32_t)0x00000040)
-#define USART_FLAG_RXNE ((uint32_t)0x00000020)
-#define USART_FLAG_IDLE ((uint32_t)0x00000010)
-#define USART_FLAG_ORE ((uint32_t)0x00000008)
-#define USART_FLAG_NE ((uint32_t)0x00000004)
-#define USART_FLAG_FE ((uint32_t)0x00000002)
-#define USART_FLAG_PE ((uint32_t)0x00000001)
-/**
- * @}
- */
-
-/** @defgroup USART_Interrupt_definition USART Interrupts Definition
- * Elements values convention: 0000ZZZZ0XXYYYYYb
- * - YYYYY : Interrupt source position in the XX register (5bits)
- * - XX : Interrupt source register (2bits)
- * - 01: CR1 register
- * - 10: CR2 register
- * - 11: CR3 register
- * - ZZZZ : Flag position in the ISR register(4bits)
- * @{
- */
-
-#define USART_IT_PE ((uint16_t)0x0028)
-#define USART_IT_TXE ((uint16_t)0x0727)
-#define USART_IT_TC ((uint16_t)0x0626)
-#define USART_IT_RXNE ((uint16_t)0x0525)
-#define USART_IT_IDLE ((uint16_t)0x0424)
-#define USART_IT_ERR ((uint16_t)0x0060)
-
-#define USART_IT_ORE ((uint16_t)0x0300)
-#define USART_IT_NE ((uint16_t)0x0200)
-#define USART_IT_FE ((uint16_t)0x0100)
-/**
- * @}
- */
-
-/** @defgroup USART_IT_CLEAR_Flags USART Interruption Clear Flags
- * @{
- */
-#define USART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
-#define USART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
-#define USART_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
-#define USART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
-#define USART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */
-#define USART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
-#define USART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */
-/**
- * @}
- */
-
-/** @defgroup USART_Request_Parameters USART Request Parameters
- * @{
- */
-#define USART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
-#define USART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
-#define IS_USART_REQUEST_PARAMETER(PARAM) (((PARAM) == USART_RXDATA_FLUSH_REQUEST) || \
- ((PARAM) == USART_TXDATA_FLUSH_REQUEST))
-/**
- * @}
- */
-
-/** @defgroup USART_Interruption_Mask USART interruptions flag mask
- * @{
- */
-#define USART_IT_MASK ((uint16_t)0x001F)
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup USART_Exported_Macros USART Exported Macros
- * @{
- */
-
-
-/** @brief Reset USART handle state
- * @param __HANDLE__: USART handle.
- * @retval None
- */
-#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET)
-
-/** @brief Checks whether the specified USART flag is set or not.
- * @param __HANDLE__: specifies the USART Handle
- * @param __FLAG__: specifies the flag to check.
- * This parameter can be one of the following values:
- * @arg USART_FLAG_REACK: Receive enable ackowledge flag
- * @arg USART_FLAG_TEACK: Transmit enable ackowledge flag
- * @arg USART_FLAG_BUSY: Busy flag
- * @arg USART_FLAG_CTS: CTS Change flag
- * @arg USART_FLAG_TXE: Transmit data register empty flag
- * @arg USART_FLAG_TC: Transmission Complete flag
- * @arg USART_FLAG_RXNE: Receive data register not empty flag
- * @arg USART_FLAG_IDLE: Idle Line detection flag
- * @arg USART_FLAG_ORE: OverRun Error flag
- * @arg USART_FLAG_NE: Noise Error flag
- * @arg USART_FLAG_FE: Framing Error flag
- * @arg USART_FLAG_PE: Parity Error flag
- * @retval The new state of __FLAG__ (TRUE or FALSE).
- */
-#define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
-
-
-/** @brief Enables the specified USART interrupt.
- * @param __HANDLE__: specifies the USART Handle
- * @param __INTERRUPT__: specifies the USART interrupt source to enable.
- * This parameter can be one of the following values:
- * @arg USART_IT_TXE: Transmit Data Register empty interrupt
- * @arg USART_IT_TC: Transmission complete interrupt
- * @arg USART_IT_RXNE: Receive Data register not empty interrupt
- * @arg USART_IT_IDLE: Idle line detection interrupt
- * @arg USART_IT_PE: Parity Error interrupt
- * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
- * @retval None
- */
-#define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
- ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
- ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & USART_IT_MASK))))
-
-/** @brief Disables the specified USART interrupt.
- * @param __HANDLE__: specifies the USART Handle.
- * @param __INTERRUPT__: specifies the USART interrupt source to disable.
- * This parameter can be one of the following values:
- * @arg USART_IT_TXE: Transmit Data Register empty interrupt
- * @arg USART_IT_TC: Transmission complete interrupt
- * @arg USART_IT_RXNE: Receive Data register not empty interrupt
- * @arg USART_IT_IDLE: Idle line detection interrupt
- * @arg USART_IT_PE: Parity Error interrupt
- * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
- * @retval None
- */
-#define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
- ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))): \
- ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & USART_IT_MASK))))
-
-
-/** @brief Checks whether the specified USART interrupt has occurred or not.
- * @param __HANDLE__: specifies the USART Handle
- * @param __IT__: specifies the USART interrupt source to check.
- * This parameter can be one of the following values:
- * @arg USART_IT_TXE: Transmit Data Register empty interrupt
- * @arg USART_IT_TC: Transmission complete interrupt
- * @arg USART_IT_RXNE: Receive Data register not empty interrupt
- * @arg USART_IT_IDLE: Idle line detection interrupt
- * @arg USART_IT_ORE: OverRun Error interrupt
- * @arg USART_IT_NE: Noise Error interrupt
- * @arg USART_IT_FE: Framing Error interrupt
- * @arg USART_IT_PE: Parity Error interrupt
- * @retval The new state of __IT__ (TRUE or FALSE).
- */
-#define __HAL_USART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
-
-/** @brief Checks whether the specified USART interrupt source is enabled.
- * @param __HANDLE__: specifies the USART Handle.
- * @param __IT__: specifies the USART interrupt source to check.
- * This parameter can be one of the following values:
- * @arg USART_IT_TXE: Transmit Data Register empty interrupt
- * @arg USART_IT_TC: Transmission complete interrupt
- * @arg USART_IT_RXNE: Receive Data register not empty interrupt
- * @arg USART_IT_IDLE: Idle line detection interrupt
- * @arg USART_IT_ORE: OverRun Error interrupt
- * @arg USART_IT_NE: Noise Error interrupt
- * @arg USART_IT_FE: Framing Error interrupt
- * @arg USART_IT_PE: Parity Error interrupt
- * @retval The new state of __IT__ (TRUE or FALSE).
- */
-#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5) == 2)? \
- (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << \
- (((uint16_t)(__IT__)) & USART_IT_MASK)))
-
-
-/** @brief Clears the specified USART ISR flag, in setting the proper ICR register flag.
- * @param __HANDLE__: specifies the USART Handle.
- * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
- * to clear the corresponding interrupt
- * This parameter can be one of the following values:
- * @arg USART_CLEAR_PEF: Parity Error Clear Flag
- * @arg USART_CLEAR_FEF: Framing Error Clear Flag
- * @arg USART_CLEAR_NEF: Noise detected Clear Flag
- * @arg USART_CLEAR_OREF: OverRun Error Clear Flag
- * @arg USART_CLEAR_IDLEF: IDLE line detected Clear Flag
- * @arg USART_CLEAR_TCF: Transmission Complete Clear Flag
- * @arg USART_CLEAR_CTSF: CTS Interrupt Clear Flag
- * @retval None
- */
-#define __HAL_USART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
-
-/** @brief Set a specific USART request flag.
- * @param __HANDLE__: specifies the USART Handle.
- * @param __REQ__: specifies the request flag to set
- * This parameter can be one of the following values:
- * @arg USART_RXDATA_FLUSH_REQUEST: Receive Data flush Request
- * @arg USART_TXDATA_FLUSH_REQUEST: Transmit data flush Request
- *
- * @retval None
- */
-#define __HAL_USART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__))
-
-/** @brief Enable USART
- * @param __HANDLE__: specifies the USART Handle.
- * @retval None
- */
-#define __HAL_USART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE)
-
-/** @brief Disable USART
- * @param __HANDLE__: specifies the USART Handle.
- * @retval None
- */
-#define __HAL_USART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
-
-/**
- * @}
- */
-
-/* Private macros --------------------------------------------------------*/
-/** @defgroup USART_Private_Macros USART Private Macros
- * @{
- */
-
-/** @brief Check USART Baud rate
- * @param BAUDRATE: Baudrate specified by the user
- * The maximum Baud Rate is derived from the maximum clock on F0 (i.e. 48 MHz)
- * divided by the smallest oversampling used on the USART (i.e. 8)
- * @retval Test result (TRUE or FALSE)
- */
-#define IS_USART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 9000001)
-/**
- * @}
- */
-
-/* Include USART HAL Extension module */
-#include "stm32f0xx_hal_usart_ex.h"
-
-/* Exported functions --------------------------------------------------------*/
-
-/** @addtogroup USART_Exported_Functions USART Exported Functions
- * @{
- */
-
-/** @addtogroup USART_Exported_Functions_Group1 Initialization and de-initialization functions
- * @{
- */
-
-/* Initialization and de-initialization functions ******************************/
-HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart);
-HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart);
-void HAL_USART_MspInit(USART_HandleTypeDef *husart);
-void HAL_USART_MspDeInit(USART_HandleTypeDef *husart);
-HAL_StatusTypeDef HAL_USART_CheckIdleState(USART_HandleTypeDef *husart);
-
-/**
- * @}
- */
-
-/** @addtogroup USART_Exported_Functions_Group2 IO operation functions
- * @{
- */
-
-/* IO operation functions *******************************************************/
-HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
-HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
-HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
-HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
-HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size);
-HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size);
-HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
-HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart);
-HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart);
-HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart);
-void HAL_USART_IRQHandler(USART_HandleTypeDef *husart);
-void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart);
-void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart);
-void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart);
-void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart);
-void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart);
-void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart);
-
-/**
- * @}
- */
-
-/* Peripheral Control functions ***********************************************/
-
-/** @addtogroup USART_Exported_Functions_Group3 Peripheral State and Errors functions
- * @{
- */
-
-/* Peripheral State and Error functions ***************************************/
-HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart);
-uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart);
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F0xx_HAL_USART_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-