Diff: TARGET_NUCLEO_F070RB/stm32f0xx_hal_pwr.h

Revision:

97:4298809c7c9e

Parent:

96:487b796308b0

--- a/TARGET_NUCLEO_F070RB/stm32f0xx_hal_pwr.h	Tue Mar 17 14:27:45 2015 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,207 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f0xx_hal_pwr.h
-  * @author  MCD Application Team
-  * @version V1.2.0
-  * @date    11-December-2014
-  * @brief   Header file of PWR HAL module.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************  
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0xx_HAL_PWR_H
-#define __STM32F0xx_HAL_PWR_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal_def.h"
-
-/** @addtogroup STM32F0xx_HAL_Driver
-  * @{
-  */
-
-/** @addtogroup PWR PWR HAL module Driver 
-  * @{
-  */
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup PWR_Exported_Constants PWR Exported Constants
-  * @{
-  */ 
-
-/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in STOP mode
-  * @{
-  */
-#define PWR_MAINREGULATOR_ON                        ((uint32_t)0x00000000)
-#define PWR_LOWPOWERREGULATOR_ON                    PWR_CR_LPDS
-
-#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \
-                                     ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON))
-/**
-  * @}
-  */
-
-/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry
-  * @{
-  */
-#define PWR_SLEEPENTRY_WFI              ((uint8_t)0x01)
-#define PWR_SLEEPENTRY_WFE              ((uint8_t)0x02)
-#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE))
-/**
-  * @}
-  */
-
-/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry
-  * @{
-  */
-#define PWR_STOPENTRY_WFI               ((uint8_t)0x01)
-#define PWR_STOPENTRY_WFE               ((uint8_t)0x02)
-#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE))
-/**
-  * @}
-  */
-
-
-/**
-  * @}
-  */
-
-/* Exported macro ------------------------------------------------------------*/
-/** @defgroup PWR_Exported_Macro PWR Exported Macro
-  * @{
-  */
-
-/** @brief  Check PWR flag is set or not.
-  * @param  __FLAG__: specifies the flag to check.
-  *           This parameter can be one of the following values:
-  *            @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event
-  *                  was received from the WKUP pin or from the RTC alarm (Alarm A),
-  *                  RTC Tamper event, RTC TimeStamp event or RTC Wakeup.
-  *                  An additional wakeup event is detected if the WKUP pin is enabled
-  *                  (by setting the EWUP bit) when the WKUP pin level is already high.
-  *            @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was
-  *                  resumed from StandBy mode.
-  *            @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled
-  *                  by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode
-  *                  For this reason, this bit is equal to 0 after Standby or reset
-  *                  until the PVDE bit is set. 
-  *                  Warning: this Flag is not available on STM32F030x8 products
-  *            @arg PWR_FLAG_VREFINTRDY: This flag indicates that the internal reference
-  *                  voltage VREFINT is ready.
-  *                  Warning: this Flag is not available on STM32F030x8 products
-  * @retval The new state of __FLAG__ (TRUE or FALSE).
-  */
-#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__))
-
-/** @brief  Clear the PWR's pending flags.
-  * @param  __FLAG__: specifies the flag to clear.
-  *          This parameter can be one of the following values:
-  *            @arg PWR_FLAG_WU: Wake Up flag
-  *            @arg PWR_FLAG_SB: StandBy flag
-  */
-#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |=  (__FLAG__) << 2)
-
-
-/**
-  * @}
-  */
-
-/* Include PWR HAL Extension module */
-#include "stm32f0xx_hal_pwr_ex.h"
-
-/* Exported functions --------------------------------------------------------*/
-
-/** @addtogroup PWR_Exported_Functions PWR Exported Functions
-  * @{
-  */
-  
-/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions 
-  * @{
-  */
-
-/* Initialization and de-initialization functions *****************************/
-void HAL_PWR_DeInit(void);
-
-/**
-  * @}
-  */
-
-/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions 
-  * @{
-  */
-
-/* Peripheral Control functions  **********************************************/
-void HAL_PWR_EnableBkUpAccess(void);
-void HAL_PWR_DisableBkUpAccess(void);
-
-/* WakeUp pins configuration functions ****************************************/
-void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx);
-void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx);
-
-/* Low Power modes configuration functions ************************************/
-void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry);
-void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry);
-void HAL_PWR_EnterSTANDBYMode(void);
-
-void HAL_PWR_EnableSleepOnExit(void);
-void HAL_PWR_DisableSleepOnExit(void);
-void HAL_PWR_EnableSEVOnPend(void);
-void HAL_PWR_DisableSEVOnPend(void);
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-#ifdef __cplusplus
-}
-#endif
-
-
-#endif /* __STM32F0xx_HAL_PWR_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-