Diff: TARGET_NUCLEO_F070RB/stm32f0xx_hal_flash.h

Revision:

97:4298809c7c9e

Parent:

96:487b796308b0

--- a/TARGET_NUCLEO_F070RB/stm32f0xx_hal_flash.h	Tue Mar 17 14:27:45 2015 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,515 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    stm32f0xx_hal_flash.h
-  * @author  MCD Application Team
-  * @version V1.2.0
-  * @date    11-December-2014
-  * @brief   Header file of Flash HAL module.
-  ******************************************************************************
-  * @attention
-  *
-  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
-  *
-  * Redistribution and use in source and binary forms, with or without modification,
-  * are permitted provided that the following conditions are met:
-  *   1. Redistributions of source code must retain the above copyright notice,
-  *      this list of conditions and the following disclaimer.
-  *   2. Redistributions in binary form must reproduce the above copyright notice,
-  *      this list of conditions and the following disclaimer in the documentation
-  *      and/or other materials provided with the distribution.
-  *   3. Neither the name of STMicroelectronics nor the names of its contributors
-  *      may be used to endorse or promote products derived from this software
-  *      without specific prior written permission.
-  *
-  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-  *
-  ******************************************************************************  
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F0xx_HAL_FLASH_H
-#define __STM32F0xx_HAL_FLASH_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f0xx_hal_def.h"
-
-/** @addtogroup STM32F0xx_HAL_Driver
-  * @{
-  */
-
-/** @addtogroup FLASH
-  * @{
-  */ 
-
-/* Exported types ------------------------------------------------------------*/ 
-
-/** @defgroup FLASH_Exported_Types FLASH Exported Types
-  * @{
-  */  
-
-/**
-  * @brief  FLASH Erase structure definition
-  */
-typedef struct
-{
-  uint32_t TypeErase;   /*!< TypeErase: Mass erase or page erase.
-                             This parameter can be a value of @ref FLASH_Type_Erase */
-
-  uint32_t PageAddress; /*!< PageAdress: Initial FLASH page address to erase when mass erase is disabled
-                             This parameter must be a value of @ref FLASHEx_Address */
-  
-  uint32_t NbPages;     /*!< NbPages: Number of pagess to be erased.
-                             This parameter must be a value between 1 and (max number of pages - value of initial page)*/           
-                                                          
-} FLASH_EraseInitTypeDef;
-
-/**
-  * @brief  FLASH Options bytes program structure definition
-  */
-typedef struct
-{
-  uint32_t OptionType;  /*!< OptionType: Option byte to be configured.
-                             This parameter can be a value of @ref FLASH_OB_Type */
-
-  uint32_t WRPState;    /*!< WRPState: Write protection activation or deactivation.
-                             This parameter can be a value of @ref FLASH_OB_WRP_State */
-
-  uint32_t WRPPage;     /*!< WRPSector: specifies the page(s) to be write protected
-                             This parameter can be a value of @ref FLASHEx_OB_Write_Protection */
-
-  uint8_t RDPLevel;     /*!< RDPLevel: Set the read protection level..
-                             This parameter can be a value of @ref FLASH_OB_Read_Protection */
-
-  uint8_t USERConfig;   /*!< USERConfig: Program the FLASH User Option Byte: 
-                             IWDG / STOP / STDBY / BOOT1 / VDDA_ANALOG / SRAM_PARITY
-                             This parameter can be a combination of @ref FLASH_OB_Watchdog, @ref FLASH_OB_nRST_STOP,
-                             @ref FLASH_OB_nRST_STDBY, @ref FLASH_OB_BOOT1, @ref FLASH_OB_VDDA_Analog_Monitoring and
-                             @ref FLASH_OB_RAM_Parity_Check_Enable */
-
-  uint32_t DATAAddress; /*!< DATAAddress: Address of the option byte DATA to be prgrammed
-                             This parameter can be a value of @ref FLASH_OB_Data_Address */
-  
-  uint8_t DATAData;     /*!< DATAData: Data to be stored in the option byte DATA
-                             This parameter can have any value */
-  
-} FLASH_OBProgramInitTypeDef;
-
-/**
-  * @brief  FLASH Procedure structure definition
-  */
-typedef enum 
-{
-  FLASH_PROC_NONE              = 0, 
-  FLASH_PROC_PAGEERASE         = 1,
-  FLASH_PROC_MASSERASE         = 2,
-  FLASH_PROC_PROGRAMHALFWORD   = 3,
-  FLASH_PROC_PROGRAMWORD       = 4,
-  FLASH_PROC_PROGRAMDOUBLEWORD = 5
-} FLASH_ProcedureTypeDef;
-
-/** 
-  * @brief  FLASH handle Structure definition  
-  */
-typedef struct
-{
-  __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*!< Internal variable to indicate which procedure is ongoing or not in IT context */
-  
-  __IO uint32_t               DataRemaining;    /*!< Internal variable to save the remaining pages to erase or half-word to program in IT context */
-  
-  __IO uint32_t               Address;          /*!< Internal variable to save address selected for program or erase */
-  
-  __IO uint64_t               Data;             /*!< Internal variable to save data to be programmed */
-
-  HAL_LockTypeDef             Lock;             /*!< FLASH locking object                */
-
-  __IO uint32_t               ErrorCode;        /*!< FLASH error code                    
-                                                     This parameter can be a value of @ref FLASH_Error  */
-
-} FLASH_ProcessTypeDef;
-
-/**
-  * @}
-  */
-
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup FLASH_Exported_Constants FLASH Exported Constants
-  * @{
-  */  
-
-/** @defgroup FLASH_Error FLASH Error
-  * @{
-  */ 
-#define FLASH_ERROR_NONE      ((uint32_t)0x00000000)
-#define FLASH_ERROR_PG        ((uint32_t)0x00000001)
-#define FLASH_ERROR_WRP       ((uint32_t)0x00000002)
-/**
-  * @}
-  */
-
-/** @defgroup FLASH_Type_Erase FLASH Type Erase
-  * @{
-  */ 
-#define TYPEERASE_PAGES     ((uint32_t)0x00)  /*!<Pages erase only*/
-#define TYPEERASE_MASSERASE ((uint32_t)0x01)  /*!<Flash mass erase activation*/
-
-#define IS_TYPEERASE(VALUE) (((VALUE) == TYPEERASE_PAGES) || \
-                             ((VALUE) == TYPEERASE_MASSERASE))  
-/**
-  * @}
-  */
-
-/** @defgroup FLASH_Type_Program FLASH Type Program
-  * @{
-  */ 
-#define TYPEPROGRAM_HALFWORD   ((uint32_t)0x01)  /*!<Program a half-word (16-bit) at a specified address.*/
-#define TYPEPROGRAM_WORD       ((uint32_t)0x02)  /*!<Program a word (32-bit) at a specified address.*/
-#define TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03)  /*!<Program a double word (64-bit) at a specified address*/
-
-#define IS_TYPEPROGRAM(VALUE)  (((VALUE) == TYPEPROGRAM_HALFWORD) || \
-                                ((VALUE) == TYPEPROGRAM_WORD)     || \
-                                ((VALUE) == TYPEPROGRAM_DOUBLEWORD))  
-/**
-  * @}
-  */
-
-/** @defgroup FLASH_OB_WRP_State FLASH WRP State
-  * @{
-  */ 
-#define WRPSTATE_DISABLE   ((uint32_t)0x00)  /*!<Disable the write protection of the desired pages*/
-#define WRPSTATE_ENABLE    ((uint32_t)0x01)  /*!<Enable the write protection of the desired pagess*/
-
-#define IS_WRPSTATE(VALUE) (((VALUE) == WRPSTATE_DISABLE) || \
-                            ((VALUE) == WRPSTATE_ENABLE))  
-/**
-  * @}
-  */
-
-/** @defgroup FLASH_OB_Type FLASH Option Bytes Type
-  * @{
-  */
-#define OPTIONBYTE_WRP       ((uint32_t)0x01)  /*!<WRP option byte configuration*/
-#define OPTIONBYTE_RDP       ((uint32_t)0x02)  /*!<RDP option byte configuration*/
-#define OPTIONBYTE_USER      ((uint32_t)0x04)  /*!<USER option byte configuration*/
-#define OPTIONBYTE_DATA      ((uint32_t)0x08)  /*!<DATA option byte configuration*/
-
-#define IS_OPTIONBYTE(VALUE) ((VALUE) <= (OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_DATA))
-/**
-  * @}
-  */
-
-/** @defgroup FLASH_Latency FLASH Latency
-  * @{
-  */ 
-#define FLASH_LATENCY_0            ((uint32_t)0x00000000)    /*!< FLASH Zero Latency cycle */
-#define FLASH_LATENCY_1            FLASH_ACR_LATENCY         /*!< FLASH One Latency cycle */
-
-#define IS_FLASH_LATENCY(LATENCY)  (((LATENCY) == FLASH_LATENCY_0) || \
-                                    ((LATENCY) == FLASH_LATENCY_1))
-/**
-  * @}
-  */ 
-  
-/** @defgroup FLASH_OB_Data_Address FLASH OB Data Address
-  * @{
-  */  
-#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == 0x1FFFF804) || ((ADDRESS) == 0x1FFFF806)) 
-/**
-  * @}
-  */
-
-/** @defgroup FLASH_OB_Read_Protection FLASH OB Read Protection
-  * @{
-  */
-#define OB_RDP_LEVEL_0             ((uint8_t)0xAA)
-#define OB_RDP_LEVEL_1             ((uint8_t)0xBB)
-#define OB_RDP_LEVEL_2             ((uint8_t)0xCC) /*!< Warning: When enabling read protection level 2 
-                                                      it's no more possible to go back to level 1 or 0 */
-#define IS_OB_RDP_LEVEL(LEVEL)     (((LEVEL) == OB_RDP_LEVEL_0)   ||\
-                                    ((LEVEL) == OB_RDP_LEVEL_1))/*||\
-                                    ((LEVEL) == OB_RDP_LEVEL_2))*/
-/**
-  * @}
-  */ 
-  
-/** @defgroup FLASH_OB_Watchdog FLASH OB Watchdog
-  * @{
-  */ 
-#define OB_WDG_SW                 ((uint8_t)0x01)  /*!< Software WDG selected */
-#define OB_WDG_HW                 ((uint8_t)0x00)  /*!< Hardware WDG selected */
-#define IS_OB_WDG_SOURCE(SOURCE)  (((SOURCE) == OB_WDG_SW) || ((SOURCE) == OB_WDG_HW))
-/**
-  * @}
-  */ 
-  
-/** @defgroup FLASH_OB_nRST_STOP FLASH OB nRST STOP
-  * @{
-  */ 
-#define OB_STOP_NO_RST             ((uint8_t)0x02) /*!< No reset generated when entering in STOP */
-#define OB_STOP_RST                ((uint8_t)0x00) /*!< Reset generated when entering in STOP */
-#define IS_OB_STOP_SOURCE(SOURCE)  (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST))
-/**
-  * @}
-  */ 
-
-/** @defgroup FLASH_OB_nRST_STDBY FLASH OB nRST STDBY 
-  * @{
-  */ 
-#define OB_STDBY_NO_RST            ((uint8_t)0x04) /*!< No reset generated when entering in STANDBY */
-#define OB_STDBY_RST               ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */
-#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST))
-/**
-  * @}
-  */    
-
-/** @defgroup FLASH_OB_BOOT1 FLASH OB BOOT1
-  * @{
-  */
-#define OB_BOOT1_RESET             ((uint8_t)0x00) /*!< BOOT1 Reset */
-#define OB_BOOT1_SET               ((uint8_t)0x10) /*!< BOOT1 Set */
-#define IS_OB_BOOT1(BOOT1)         (((BOOT1) == OB_BOOT1_RESET) || ((BOOT1) == OB_BOOT1_SET))
-/**
-  * @}
-  */  
-
-/** @defgroup FLASH_OB_VDDA_Analog_Monitoring FLASH OB VDDA Analog Monitoring
-  * @{
-  */
-#define OB_VDDA_ANALOG_ON          ((uint8_t)0x20) /*!< Analog monitoring on VDDA Power source ON */
-#define OB_VDDA_ANALOG_OFF         ((uint8_t)0x00) /*!< Analog monitoring on VDDA Power source OFF */
-#define IS_OB_VDDA_ANALOG(ANALOG)  (((ANALOG) == OB_VDDA_ANALOG_ON) || ((ANALOG) == OB_VDDA_ANALOG_OFF))
-/**
-  * @}
-  */ 
-
-/** @defgroup FLASH_OB_RAM_Parity_Check_Enable FLASH OB RAM Parity Check Enable
-  * @{
-  */
-#define OB_RAM_PARITY_CHECK_SET    ((uint8_t)0x00) /*!< RAM parity check enable set */
-#define OB_RAM_PARITY_CHECK_RESET  ((uint8_t)0x40) /*!< RAM parity check enable reset */
-#define IS_OB_SRAM_PARITY(PARITY)  (((PARITY) == OB_RAM_PARITY_CHECK_SET) || ((PARITY) == OB_RAM_PARITY_CHECK_RESET))
-/**
-  * @}
-  */ 
-
-/** @defgroup FLASH_Flag_definition FLASH Flag definition
-  * @{
-  */ 
-#define FLASH_FLAG_BSY             FLASH_SR_BSY            /*!< FLASH Busy flag                           */ 
-#define FLASH_FLAG_PGERR           FLASH_SR_PGERR          /*!< FLASH Programming error flag    */
-#define FLASH_FLAG_WRPERR          FLASH_SR_WRPERR         /*!< FLASH Write protected error flag          */
-#define FLASH_FLAG_EOP             FLASH_SR_EOP            /*!< FLASH End of Operation flag               */
-/**
-  * @}
-  */
-  
-/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition
-  * @{
-  */ 
-#define FLASH_IT_EOP               FLASH_CR_EOPIE          /*!< End of FLASH Operation Interrupt source */
-#define FLASH_IT_ERR               FLASH_CR_ERRIE  /*!< Error Interrupt source */
-/**
-  * @}
-  */  
-
-/** @defgroup FLASH_Timeout_definition  FLASH Timeout definition
-  * @brief FLASH Timeout definition
-  * @{
-  */ 
-#define HAL_FLASH_TIMEOUT_VALUE   ((uint32_t)50000)/* 50 s */
-/**
-  * @}
-  */  
-
-/**
-  * @}
-  */  
-  
-/* Exported macro ------------------------------------------------------------*/
-
-/** @defgroup FLASH_Exported_Macros FLASH Exported Macros
- *  @brief macros to control FLASH features 
- *  @{
- */
-
-/** @defgroup FLASH_Latency FLASH Latency
- *  @brief macros to handle FLASH Latency
- * @{
- */ 
-  
-/**
-  * @brief  Set the FLASH Latency.
-  * @param  __LATENCY__: FLASH Latency                   
-  *         The value of this parameter depend on device used within the same series
-  * @retval None
-  */ 
-#define __HAL_FLASH_SET_LATENCY(__LATENCY__)    (FLASH->ACR = (FLASH->ACR&(~FLASH_ACR_LATENCY)) | (__LATENCY__))
-/**
-  * @}
-  */
-
-/** @defgroup FLASH_Prefetch FLASH Prefetch
- *  @brief macros to handle FLASH Prefetch buffer
- * @{
- */   
-/**
-  * @brief  Enable the FLASH prefetch buffer.
-  * @retval None
-  */ 
-#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE()    (FLASH->ACR |= FLASH_ACR_PRFTBE)
-
-/**
-  * @brief  Disable the FLASH prefetch buffer.
-  * @retval None
-  */
-#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE()   (FLASH->ACR &= (~FLASH_ACR_PRFTBE))
-
-/**
-  * @}
-  */
-
-/** @defgroup FLASH_Interrupt FLASH Interrupt
- *  @brief macros to handle FLASH interrupts
- * @{
- */ 
-
-/**
-  * @brief  Enable the specified FLASH interrupt.
-  * @param  __INTERRUPT__ : FLASH interrupt 
-  *         This parameter can be any combination of the following values:
-  *     @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
-  *     @arg FLASH_IT_ERR: Error Interrupt    
-  * @retval none
-  */  
-#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__)  (FLASH->CR |= (__INTERRUPT__))
-
-/**
-  * @brief  Disable the specified FLASH interrupt.
-  * @param  __INTERRUPT__ : FLASH interrupt 
-  *         This parameter can be any combination of the following values:
-  *     @arg FLASH_IT_EOP: End of FLASH Operation Interrupt
-  *     @arg FLASH_IT_ERR: Error Interrupt    
-  * @retval none
-  */  
-#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__)  (FLASH->CR &= ~(uint32_t)(__INTERRUPT__))
-
-/**
-  * @brief  Get the specified FLASH flag status. 
-  * @param  __FLAG__: specifies the FLASH flag to check.
-  *          This parameter can be one of the following values:
-  *            @arg FLASH_FLAG_EOP   : FLASH End of Operation flag 
-  *            @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag 
-  *            @arg FLASH_FLAG_PGERR : FLASH Programming error flag
-  *            @arg FLASH_FLAG_BSY   : FLASH Busy flag
-  * @retval The new state of __FLAG__ (SET or RESET).
-  */
-#define __HAL_FLASH_GET_FLAG(__FLAG__)          ((FLASH->SR & (__FLAG__)) == (__FLAG__))
-
-/**
-  * @brief  Clear the specified FLASH flag.
-  * @param  __FLAG__: specifies the FLASH flags to clear.
-  *          This parameter can be any combination of the following values:
-  *            @arg FLASH_FLAG_EOP   : FLASH End of Operation flag 
-  *            @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag 
-  *            @arg FLASH_FLAG_PGERR : FLASH Programming error flag 
-  * @retval none
-  */
-#define __HAL_FLASH_CLEAR_FLAG(__FLAG__)        (FLASH->SR = (__FLAG__))
-
-/**
-  * @}
-  */ 
-
-/**
-  * @}
-  */ 
-  
-/* Include FLASH HAL Extension module */
-#include "stm32f0xx_hal_flash_ex.h"  
-
-/* Exported functions --------------------------------------------------------*/
-
-/** @addtogroup FLASH_Exported_Functions
-  * @{
-  */  
-
-/** @addtogroup FLASH_Exported_Functions_Group1 
- *  @brief   Data transfers functions
- * @{
- */
-  
-/* IO operation functions *****************************************************/
-HAL_StatusTypeDef  HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
-HAL_StatusTypeDef  HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data);
-
-/* FLASH IRQ handler method */
-void               HAL_FLASH_IRQHandler(void);
-/* Callbacks in non blocking modes */ 
-void               HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue);
-void               HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue);
-
-/**
-  * @}
-  */  
-
-/** @addtogroup FLASH_Exported_Functions_Group2 
- *  @brief   management functions 
- * @{
- */
-   
-/* FLASH Memory Programming functions *****************************************/   
-HAL_StatusTypeDef  HAL_FLASH_Unlock(void);
-HAL_StatusTypeDef  HAL_FLASH_Lock(void);
-
-/* Option Bytes Programming functions *****************************************/
-HAL_StatusTypeDef  HAL_FLASH_OB_Unlock(void);
-HAL_StatusTypeDef  HAL_FLASH_OB_Lock(void);
-HAL_StatusTypeDef  HAL_FLASH_OB_Launch(void);
-
-/**
-  * @}
-  */
-
-/** @addtogroup FLASH_Exported_Functions_Group3 
- * @{
- */
-/* Peripheral State and Error functions ***************************************/
-uint32_t HAL_FLASH_GetError(void);
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-/**
-  * @}
-  */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F0xx_HAL_FLASH_H */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-