Filippo Casamassima
my fork
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_L053R8/stm32l0xx_hal.h
- Revision:
- 84:0b3ab51c8877
- Child:
- 92:4fc01daae5a5
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_L053R8/stm32l0xx_hal.h Mon May 19 18:14:09 2014 +0100
@@ -0,0 +1,235 @@
+/**
+ ******************************************************************************
+ * @file stm32l0xx_hal.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 22-April-2014
+ * @brief This file contains all the functions prototypes for the HAL
+ * module driver.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L0xx_HAL_H
+#define __STM32L0xx_HAL_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l0xx_hal_conf.h"
+
+/** @addtogroup STM32L0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup HAL
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup HAL_Exported_Constants
+ * @{
+ */
+
+/** @defgroup DBGMCU_Low_Power_Config
+ * @{
+ */
+#define DBGMCU_SLEEP DBGMCU_CR_DBG_SLEEP
+#define DBGMCU_STOP DBGMCU_CR_DBG_STOP
+#define DBGMCU_STANDBY DBGMCU_CR_DBG_STANDBY
+#define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0xFFFFFFF8) == 0x00) && ((PERIPH) != 0x00))
+
+/**
+ * @}
+ */
+
+
+/** @defgroup SYSCFG_I2C_FastModePlus_Config
+ * @{
+ */
+#define SYSCFG_I2CFastModePlus_PB6 SYSCFG_CFGR2_I2C_PB6_FMP /* Enable Fast Mode Plus on PB6 */
+#define SYSCFG_I2CFastModePlus_PB7 SYSCFG_CFGR2_I2C_PB7_FMP /* Enable Fast Mode Plus on PB7 */
+#define SYSCFG_I2CFastModePlus_PB8 SYSCFG_CFGR2_I2C_PB8_FMP /* Enable Fast Mode Plus on PB8 */
+#define SYSCFG_I2CFastModePlus_PB9 SYSCFG_CFGR2_I2C_PB9_FMP /* Enable Fast Mode Plus on PB9 */
+#define SYSCFG_I2CFastModePlus_I2C1 SYSCFG_CFGR2_I2C1_FMP /*!< Enable Fast Mode Plus on I2C1 pins */
+#define SYSCFG_I2CFastModePlus_I2C2 SYSCFG_CFGR2_I2C2_FMP /*!< Enable Fast Mode Plus on I2C2 pins */
+
+#define IS_SYSCFG_I2C_FMP(PIN) (((PIN) == SYSCFG_I2CFastModePlus_PB6) || \
+ ((PIN) == SYSCFG_I2CFastModePlus_PB7) || \
+ ((PIN) == SYSCFG_I2CFastModePlus_PB8) || \
+ ((PIN) == SYSCFG_I2CFastModePlus_PB9) || \
+ ((PIN) == SYSCFG_I2CFastModePlus_I2C1) || \
+ ((PIN) == SYSCFG_I2CFastModePlus_I2C2))
+
+/**
+ * @}
+ */
+
+/** @defgroup SYSCFG_VREFINT_OUT_SELECT
+ * @{
+ */
+#define SYSCFG_VREFINT_OUT_NONE ((uint32_t)0x00000000) /* no pad connected */
+#define SYSCFG_VREFINT_OUT_PB0 SYSCFG_CFGR3_VREF_OUT_0 /* Selects PBO as output for the Vrefint */
+#define SYSCFG_VREFINT_OUT_PB1 SYSCFG_CFGR3_VREF_OUT_1 /* Selects PB1 as output for the Vrefint */
+#define SYSCFG_VREFINT_OUT_PB0_PB1 SYSCFG_CFGR3_VREF_OUT /* Selects PBO and PB1 as output for the Vrefint */
+
+#define IS_SYSCFG_VREFINT_OUT_SELECT(OUTPUT) (((OUTPUT) == SYSCFG_VREFINT_OUT_PB0) || \
+ ((OUTPUT) == SYSCFG_VREFINT_OUT_PB1) || \
+ ((OUTPUT) == SYSCFG_VREFINT_OUT_PB0_PB1))
+
+/**
+ * @}
+ */
+
+/** @defgroup SYSCFG_flags_definition
+ * @{
+ */
+
+#define SYSCFG_FLAG_RC48 SYSCFG_CFGR3_REF_HSI48_RDYF
+#define SYSCFG_FLAG_SENSOR_ADC SYSCFG_CFGR3_SENSOR_ADC_RDYF
+#define SYSCFG_FLAG_VREF_ADC SYSCFG_VREFINT_ADC_RDYF
+#define SYSCFG_FLAG_VREF_COMP SYSCFG_CFGR3_VREFINT_COMP_RDYF
+#define SYSCFG_FLAG_VREF_READY SYSCFG_CFGR3_VREFINT_RDYF
+
+#define IS_SYSCFG_FLAG(FLAG) (((FLAG) == SYSCFG_FLAG_RC48) || \
+ ((FLAG) == SYSCFG_FLAG_SENSOR_ADC) || \
+ ((FLAG) == SYSCFG_FLAG_VREF_ADC) || \
+ ((FLAG) == SYSCFG_FLAG_VREF_COMP) || \
+ ((FLAG) == SYSCFG_FLAG_VREF_READY))
+
+/**
+ * @}
+ */
+/* Exported macro ------------------------------------------------------------*/
+
+/** @brief Freeze/Unfreeze Peripherals in Debug mode
+ */
+#define __HAL_FREEZE_TIM2_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_FREEZE_TIM6_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_FREEZE_RTC_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_FREEZE_WWDG_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_FREEZE_IWDG_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_STOP))
+#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_STOP))
+#define __HAL_FREEZE_LPTIMER_DBGMCU() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_LPTIMER_STOP))
+#define __HAL_FREEZE_TIM22_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM22_STOP))
+#define __HAL_FREEZE_TIM21_DBGMCU() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM21_STOP))
+
+#define __HAL_UNFREEZE_TIM2_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP))
+#define __HAL_UNFREEZE_TIM6_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP))
+#define __HAL_UNFREEZE_RTC_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP))
+#define __HAL_UNFREEZE_WWDG_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP))
+#define __HAL_UNFREEZE_IWDG_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP))
+#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_STOP))
+#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_STOP))
+#define __HAL_UNFREEZE_LPTIMER_DBGMCU() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_LPTIMER_STOP))
+#define __HAL_UNFREEZE_TIM22_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM22_STOP))
+#define __HAL_UNFREEZE_TIM21_DBGMCU() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM21_STOP))
+
+/** @brief Main Flash memory mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_FLASH (SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE))
+
+/** @brief System Flash memory mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_SYSTEMFLASH do {SYSCFG->MEMRMP &= ~(SYSCFG_CFGR1_MEM_MODE);\
+ SYSCFG->MEMRMP |= SYSCFG_CFGR1_MEM_MODE_0;\
+ }while(0);
+
+/** @brief Embedded SRAM mapped at 0x00000000
+ */
+#define __HAL_REMAPMEMORY_SRAM do {SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_MEM_MODE);\
+ SYSCFG->CFGR1 |= (SYSCFG_CFGR1_MEM_MODE_0 | SYSCFG_CFGR1_MEM_MODE_1);\
+ }while(0);
+
+/** @brief Check whether the specified SYSCFG flag is set or not.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * SYSCFG_FLAG_PE: SRAM parity error flag.
+ * @arg SYSCFG_FLAG_RC48
+ * @arg SYSCFG_FLAG_SENSOR_ADC
+ * @arg SYSCFG_FLAG_VREF_ADC
+ * @arg SYSCFG_FLAG_VREF_COMP
+ * @arg SYSCFG_FLAG_VREF_READY
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SYSCFG_GET_FLAG(__FLAG__) (((SYSCFG->CFGR3) & (__FLAG__)) == (__FLAG__))
+
+/**
+ * @}
+ */
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions ******************************/
+HAL_StatusTypeDef HAL_Init(void);
+HAL_StatusTypeDef HAL_DeInit(void);
+void HAL_MspInit(void);
+void HAL_MspDeInit(void);
+HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority);
+
+/* Peripheral Control functions ************************************************/
+void HAL_IncTick(void);
+void HAL_Delay(__IO uint32_t Delay);
+uint32_t HAL_GetTick(void);
+void HAL_SuspendTick(void);
+void HAL_ResumeTick(void);
+uint32_t HAL_GetHalVersion(void);
+uint32_t HAL_GetREVID(void);
+uint32_t HAL_GetDEVID(void);
+
+void HAL_DBG_LowPowerConfig(uint32_t Periph, FunctionalState NewState);
+uint32_t HAL_GetBootMode(void);
+void HAL_I2CFastModePlusConfig(uint32_t SYSCFG_I2CFastModePlus, FunctionalState NewState);
+void HAL_VREFINT_Cmd(FunctionalState NewState);
+void HAL_VREFINT_OutputSelect(uint32_t SYSCFG_Vrefint_OUTPUT);
+void HAL_ADC_EnableBuffer_Cmd(FunctionalState NewState);
+void HAL_ADC_EnableBufferSensor_Cmd(FunctionalState NewState);
+void HAL_COMP_EnableBuffer_Cmd(FunctionalState NewState);
+void HAL_RC48_EnableBuffer_Cmd(FunctionalState NewState);
+void HAL_Lock_Cmd(FunctionalState NewState);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L0xx_HAL_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/