my fork

Dependents:   Nucleo_blueNRG

Fork of mbed by mbed official

Revision:
86:04dd9b1680ae
Child:
92:4fc01daae5a5
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F334R8/stm32f3xx_hal_tim_ex.h	Wed Jul 02 13:22:23 2014 +0100
@@ -0,0 +1,947 @@
+/**
+  ******************************************************************************
+  * @file    stm32f3xx_hal_tim_ex.h
+  * @author  MCD Application Team
+  * @version V1.0.1
+  * @date    18-June-2014
+  * @brief   Header file of TIM HAL Extension module.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F3xx_HAL_TIM_EX_H
+#define __STM32F3xx_HAL_TIM_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f3xx_hal_def.h"
+
+/** @addtogroup STM32F3xx_HAL_Driver
+  * @{
+  */
+
+/** @addtogroup TIMEx
+  * @{
+  */ 
+
+/* Exported types ------------------------------------------------------------*/ 
+
+/** 
+  * @brief  TIM Hall sensor Configuration Structure definition  
+  */
+
+typedef struct
+{
+                                  
+  uint32_t IC1Polarity;            /*!< Specifies the active edge of the input signal.
+                                        This parameter can be a value of @ref TIM_Input_Capture_Polarity */
+                                                                   
+  uint32_t IC1Prescaler;        /*!< Specifies the Input Capture Prescaler.
+                                     This parameter can be a value of @ref TIM_Input_Capture_Prescaler */
+                                  
+  uint32_t IC1Filter;           /*!< Specifies the input capture filter.
+                                     This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */  
+  uint32_t Commutation_Delay;  /*!< Specifies the pulse value to be loaded into the Capture Compare Register. 
+                                    This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */                              
+} TIM_HallSensor_InitTypeDef;
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** 
+  * @brief  TIM Master configuration Structure definition  
+  * @note   STM32F373xC and STM32F378xx: timer instances provide a single TRGO
+  *         output
+  */ 
+typedef struct {
+  uint32_t  MasterOutputTrigger;   /*!< Trigger output (TRGO) selection 
+                                      This parameter can be a value of @ref TIM_Master_Mode_Selection */ 
+  uint32_t  MasterSlaveMode;       /*!< Master/slave mode selection 
+                                      This parameter can be a value of @ref TIM_Master_Slave_Mode */
+}TIM_MasterConfigTypeDef;
+
+/** 
+  * @brief  TIM Break and Dead time configuration Structure definition  
+  * @note   STM32F373xC and STM32F378xx: single break input with configurable polarity.
+  */ 
+typedef struct
+{
+  uint32_t OffStateRunMode;	      /*!< TIM off state in run mode
+                                         This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+  uint32_t OffStateIDLEMode;	      /*!< TIM off state in IDLE mode
+                                         This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+  uint32_t LockLevel;	 	      /*!< TIM Lock level
+                                         This parameter can be a value of @ref TIM_Lock_level */                             
+  uint32_t DeadTime;	 	      /*!< TIM dead Time 
+                                         This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+  uint32_t BreakState;	 	      /*!< TIM Break State 
+                                         This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+  uint32_t BreakPolarity;             /*!< TIM Break input polarity 
+                                         This parameter can be a value of @ref TIM_Break_Polarity */
+  uint32_t AutomaticOutput;           /*!< TIM Automatic Output Enable state 
+                                         This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */           
+} TIM_BreakDeadTimeConfigTypeDef;
+
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) ||                        \
+    defined(STM32F302xC) || defined(STM32F303xC) ||defined(STM32F358xx) || \
+    defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+/** 
+  * @brief  TIM Break input(s) and Dead time configuration Structure definition  
+  * @note   2 break inputs can be configured (BKIN and BKIN2) with configurable 
+  *        filter and polarity.
+  */ 
+typedef struct
+{
+  uint32_t OffStateRunMode;	      /*!< TIM off state in run mode
+                                         This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */
+  uint32_t OffStateIDLEMode;	      /*!< TIM off state in IDLE mode
+                                         This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */
+  uint32_t LockLevel;	 	      /*!< TIM Lock level
+                                         This parameter can be a value of @ref TIM_Lock_level */                             
+  uint32_t DeadTime;	 	      /*!< TIM dead Time 
+                                         This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */
+  uint32_t BreakState;	 	      /*!< TIM Break State 
+                                         This parameter can be a value of @ref TIM_Break_Input_enable_disable */
+  uint32_t BreakPolarity;             /*!< TIM Break input polarity 
+                                         This parameter can be a value of @ref TIM_Break_Polarity */
+  uint32_t BreakFilter;               /*!< Specifies the brek input filter.
+                                         This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */  
+  uint32_t Break2State;	 	      /*!< TIM Break2 State 
+                                         This parameter can be a value of @ref TIMEx_Break2_Input_enable_disable */
+  uint32_t Break2Polarity;            /*!< TIM Break2 input polarity 
+                                         This parameter can be a value of @ref TIMEx_Break2_Polarity */
+  uint32_t Break2Filter;              /*!< TIM break2 input filter.
+                                         This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */  
+  uint32_t AutomaticOutput;           /*!< TIM Automatic Output Enable state 
+                                         This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */           
+} TIM_BreakDeadTimeConfigTypeDef;
+
+/** 
+  * @brief  TIM Master configuration Structure definition  
+  * @note   Advanced timers provide TRGO2 internal line which is redirected
+  *         to the ADC 
+  */ 
+typedef struct {
+  uint32_t  MasterOutputTrigger;   /*!< Trigger output (TRGO) selection 
+                                      This parameter can be a value of @ref TIM_Master_Mode_Selection */ 
+  uint32_t  MasterOutputTrigger2;  /*!< Trigger output2 (TRGO2) selection 
+                                      This parameter can be a value of @ref TIMEx_Master_Mode_Selection_2 */
+  uint32_t  MasterSlaveMode;       /*!< Master/slave mode selection 
+                                      This parameter can be a value of @ref TIM_Master_Slave_Mode */
+}TIM_MasterConfigTypeDef;
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx ||                */
+       /* STM32F302xC || STM32F303xC || STM32F358xx || */
+       /* STM32F303x8 || STM32F334x8 || STM32F328xx                   */
+
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup TIMEx_Exported_Constants
+  * @{
+  */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup TIMEx_Channel
+  * @{
+  */
+#define TIM_CHANNEL_1                      ((uint32_t)0x0000)
+#define TIM_CHANNEL_2                      ((uint32_t)0x0004)
+#define TIM_CHANNEL_3                      ((uint32_t)0x0008)
+#define TIM_CHANNEL_4                      ((uint32_t)0x000C)
+#define TIM_CHANNEL_ALL                    ((uint32_t)0x0018)
+                                 
+#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+                                  ((CHANNEL) == TIM_CHANNEL_2) || \
+                                  ((CHANNEL) == TIM_CHANNEL_3) || \
+                                  ((CHANNEL) == TIM_CHANNEL_4) || \
+                                  ((CHANNEL) == TIM_CHANNEL_ALL))
+                                 
+#define IS_TIM_PWMI_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+                                       ((CHANNEL) == TIM_CHANNEL_2))
+                                      
+#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+                                      ((CHANNEL) == TIM_CHANNEL_2))                                       
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+                                                ((CHANNEL) == TIM_CHANNEL_2) || \
+                                                ((CHANNEL) == TIM_CHANNEL_3))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIMEx_Output_Compare_and_PWM_modes
+  * @{
+  */
+
+#define TIM_OCMODE_TIMING                   ((uint32_t)0x0000)
+#define TIM_OCMODE_ACTIVE                   ((uint32_t)TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_INACTIVE                 ((uint32_t)TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_TOGGLE                   ((uint32_t)TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_PWM1                     ((uint32_t)TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_PWM2                     ((uint32_t)TIM_CCMR1_OC1M)
+#define TIM_OCMODE_FORCED_ACTIVE            ((uint32_t)TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_FORCED_INACTIVE          ((uint32_t)TIM_CCMR1_OC1M_2)
+
+#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \
+	                       ((MODE) == TIM_OCMODE_PWM2))
+
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING)           || \
+                              ((MODE) == TIM_OCMODE_ACTIVE)           || \
+                              ((MODE) == TIM_OCMODE_INACTIVE)         || \
+                              ((MODE) == TIM_OCMODE_TOGGLE)           || \
+                              ((MODE) == TIM_OCMODE_FORCED_ACTIVE)    || \
+                              ((MODE) == TIM_OCMODE_FORCED_INACTIVE))
+/**
+  * @}
+  */
+
+/** @defgroup TIMEx_ClearInput_Source
+  * @{
+  */
+#define TIM_CLEARINPUTSOURCE_ETR           ((uint32_t)0x0001) 
+#define TIM_CLEARINPUTSOURCE_NONE          ((uint32_t)0x0000)
+
+#define IS_TIM_CLEARINPUT_SOURCE(SOURCE)  (((SOURCE) == TIM_CLEARINPUTSOURCE_NONE) || \
+                                           ((SOURCE) == TIM_CLEARINPUTSOURCE_ETR)) 
+/**
+  * @}
+  */
+
+/** @defgroup TIMEx_Slave_Mode
+  * @{
+  */
+
+#define TIM_SLAVEMODE_DISABLE              ((uint32_t)0x0000)
+#define TIM_SLAVEMODE_RESET                ((uint16_t)0x0004)
+#define TIM_SLAVEMODE_GATED                ((uint16_t)0x0005)
+#define TIM_SLAVEMODE_TRIGGER              ((uint16_t)0x0006)
+#define TIM_SLAVEMODE_EXTERNAL1            ((uint16_t)0x0007)
+
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \
+                                 ((MODE) == TIM_SLAVEMODE_RESET) || \
+                                 ((MODE) == TIM_SLAVEMODE_GATED) || \
+                                 ((MODE) == TIM_SLAVEMODE_TRIGGER) || \
+                                 ((MODE) == TIM_SLAVEMODE_EXTERNAL1))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIMEx_Event_Source
+  * @{
+  */
+
+#define TIM_EventSource_Update              TIM_EGR_UG     /*!< Reinitialize the counter and generates an update of the registers */
+#define TIM_EventSource_CC1                 TIM_EGR_CC1G   /*!< A capture/compare event is generated on channel 1 */
+#define TIM_EventSource_CC2                 TIM_EGR_CC2G   /*!< A capture/compare event is generated on channel 2 */
+#define TIM_EventSource_CC3                 TIM_EGR_CC3G   /*!< A capture/compare event is generated on channel 3 */
+#define TIM_EventSource_CC4                 TIM_EGR_CC4G   /*!< A capture/compare event is generated on channel 4 */
+#define TIM_EventSource_COM                 TIM_EGR_COMG   /*!< A commutation event is generated */
+#define TIM_EventSource_Trigger             TIM_EGR_TG     /*!< A trigger event is generated */
+#define TIM_EventSource_Break               TIM_EGR_BG     /*!< A break event is generated */
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFF00) == 0x00000000) && ((SOURCE) != 0x00000000))                                          
+  
+/**
+  * @}
+  */ 
+
+/** @defgroup TIMEx_DMA_Base_address
+  * @{
+  */
+
+#define TIM_DMABase_CR1                    (0x00000000)
+#define TIM_DMABase_CR2                    (0x00000001)
+#define TIM_DMABase_SMCR                   (0x00000002)
+#define TIM_DMABase_DIER                   (0x00000003)
+#define TIM_DMABase_SR                     (0x00000004)
+#define TIM_DMABase_EGR                    (0x00000005)
+#define TIM_DMABase_CCMR1                  (0x00000006)
+#define TIM_DMABase_CCMR2                  (0x00000007)
+#define TIM_DMABase_CCER                   (0x00000008)
+#define TIM_DMABase_CNT                    (0x00000009)
+#define TIM_DMABase_PSC                    (0x0000000A)
+#define TIM_DMABase_ARR                    (0x0000000B)
+#define TIM_DMABase_RCR                    (0x0000000C)
+#define TIM_DMABase_CCR1                   (0x0000000D)
+#define TIM_DMABase_CCR2                   (0x0000000E)
+#define TIM_DMABase_CCR3                   (0x0000000F)
+#define TIM_DMABase_CCR4                   (0x00000010)
+#define TIM_DMABase_BDTR                   (0x00000011)
+#define TIM_DMABase_DCR                    (0x00000012)
+#define TIM_DMABase_OR                     (0x00000013)
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1) || \
+                               ((BASE) == TIM_DMABase_CR2) || \
+                               ((BASE) == TIM_DMABase_SMCR) || \
+                               ((BASE) == TIM_DMABase_DIER) || \
+                               ((BASE) == TIM_DMABase_SR) || \
+                               ((BASE) == TIM_DMABase_EGR) || \
+                               ((BASE) == TIM_DMABase_CCMR1) || \
+                               ((BASE) == TIM_DMABase_CCMR2) || \
+                               ((BASE) == TIM_DMABase_CCER) || \
+                               ((BASE) == TIM_DMABase_CNT) || \
+                               ((BASE) == TIM_DMABase_PSC) || \
+                               ((BASE) == TIM_DMABase_ARR) || \
+                               ((BASE) == TIM_DMABase_RCR) || \
+                               ((BASE) == TIM_DMABase_CCR1) || \
+                               ((BASE) == TIM_DMABase_CCR2) || \
+                               ((BASE) == TIM_DMABase_CCR3) || \
+                               ((BASE) == TIM_DMABase_CCR4) || \
+                               ((BASE) == TIM_DMABase_BDTR) || \
+                               ((BASE) == TIM_DMABase_DCR) || \
+                               ((BASE) == TIM_DMABase_OR))                     
+/**
+  * @}
+  */ 
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) ||                        \
+    defined(STM32F302xC) || defined(STM32F303xC) ||defined(STM32F358xx) || \
+    defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+/** @defgroup TIMEx_Channel
+  * @{
+  */
+
+#define TIM_CHANNEL_1                      ((uint32_t)0x0000)
+#define TIM_CHANNEL_2                      ((uint32_t)0x0004)
+#define TIM_CHANNEL_3                      ((uint32_t)0x0008)
+#define TIM_CHANNEL_4                      ((uint32_t)0x000C)
+#define TIM_CHANNEL_5                      ((uint32_t)0x0010)
+#define TIM_CHANNEL_6                      ((uint32_t)0x0014)
+#define TIM_CHANNEL_ALL                    ((uint32_t)0x003C)
+                                 
+#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+                                  ((CHANNEL) == TIM_CHANNEL_2) || \
+                                  ((CHANNEL) == TIM_CHANNEL_3) || \
+                                  ((CHANNEL) == TIM_CHANNEL_4) || \
+                                  ((CHANNEL) == TIM_CHANNEL_5) || \
+                                  ((CHANNEL) == TIM_CHANNEL_6) || \
+                                  ((CHANNEL) == TIM_CHANNEL_ALL))
+                                 
+#define IS_TIM_PWMI_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+                                       ((CHANNEL) == TIM_CHANNEL_2))
+                                      
+#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+                                      ((CHANNEL) == TIM_CHANNEL_2))                                       
+
+#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
+                                                ((CHANNEL) == TIM_CHANNEL_2) || \
+                                                ((CHANNEL) == TIM_CHANNEL_3))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIMEx_Output_Compare_and_PWM_modes
+  * @{
+  */
+#define TIM_OCMODE_TIMING                   ((uint32_t)0x0000)
+#define TIM_OCMODE_ACTIVE                   ((uint32_t)TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_INACTIVE                 ((uint32_t)TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_TOGGLE                   ((uint32_t)TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_PWM1                     ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1)
+#define TIM_OCMODE_PWM2                     ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_FORCED_ACTIVE            ((uint32_t)TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_FORCED_INACTIVE          ((uint32_t)TIM_CCMR1_OC1M_2)
+
+#define TIM_OCMODE_RETRIGERRABLE_OPM1      ((uint32_t)TIM_CCMR1_OC1M_3)
+#define TIM_OCMODE_RETRIGERRABLE_OPM2      ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0)
+#define TIM_OCMODE_COMBINED_PWM1           ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_COMBINED_PWM2           ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_ASSYMETRIC_PWM1         ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2)
+#define TIM_OCMODE_ASSYMETRIC_PWM2         ((uint32_t)TIM_CCMR1_OC1M_3 | TIM_CCMR1_OC1M)
+
+#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1)               || \
+	                       ((MODE) == TIM_OCMODE_PWM2)               || \
+                               ((MODE) == TIM_OCMODE_COMBINED_PWM1)      || \
+                               ((MODE) == TIM_OCMODE_COMBINED_PWM2)      || \
+                               ((MODE) == TIM_OCMODE_ASSYMETRIC_PWM1)    || \
+                               ((MODE) == TIM_OCMODE_ASSYMETRIC_PWM2))
+                              
+#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING)             || \
+                             ((MODE) == TIM_OCMODE_ACTIVE)             || \
+                             ((MODE) == TIM_OCMODE_INACTIVE)           || \
+                             ((MODE) == TIM_OCMODE_TOGGLE)             || \
+                             ((MODE) == TIM_OCMODE_FORCED_ACTIVE)      || \
+                             ((MODE) == TIM_OCMODE_FORCED_INACTIVE)    || \
+                             ((MODE) == TIM_OCMODE_RETRIGERRABLE_OPM1) || \
+                             ((MODE) == TIM_OCMODE_RETRIGERRABLE_OPM2))
+/**
+  * @}
+  */
+
+/** @defgroup TIMEx_ClearInput_Source
+  * @{
+  */
+#define TIM_CLEARINPUTSOURCE_ETR            ((uint32_t)0x0001) 
+#define TIM_CLEARINPUTSOURCE_OCREFCLR       ((uint32_t)0x0002) 
+#define TIM_CLEARINPUTSOURCE_NONE           ((uint32_t)0x0000)
+
+#define IS_TIM_CLEARINPUT_SOURCE(MODE) (((MODE) == TIM_CLEARINPUTSOURCE_ETR)      || \
+                                        ((MODE) == TIM_CLEARINPUTSOURCE_OCREFCLR)  || \
+                                        ((MODE) == TIM_CLEARINPUTSOURCE_NONE))
+/**
+  * @}
+  */
+
+/** @defgroup TIMEx_BreakInput_Filter
+  * @{
+  */
+
+#define IS_TIM_BREAK_FILTER(BRKFILTER) ((BRKFILTER) <= 0xF) 
+/**
+  * @}
+  */  
+
+/** @defgroup TIMEx_Break2_Input_enable_disable 
+  * @{
+  */                         
+#define TIM_BREAK2_DISABLE         ((uint32_t)0x00000000)
+#define TIM_BREAK2_ENABLE          ((uint32_t)TIM_BDTR_BK2E)
+
+#define IS_TIM_BREAK2_STATE(STATE) (((STATE) == TIM_BREAK2_ENABLE) || \
+                                    ((STATE) == TIM_BREAK2_DISABLE))
+/**
+  * @}
+  */
+/** @defgroup TIMEx_Break2_Polarity 
+  * @{
+  */
+#define TIM_BREAK2POLARITY_LOW        ((uint32_t)0x00000000)
+#define TIM_BREAK2POLARITY_HIGH       ((uint32_t)TIM_BDTR_BK2P)
+
+#define IS_TIM_BREAK2_POLARITY(POLARITY) (((POLARITY) == TIM_BREAK2POLARITY_LOW) || \
+                                          ((POLARITY) == TIM_BREAK2POLARITY_HIGH))
+/**
+  * @}
+  */
+    
+/** @defgroup TIMEx_Master_Mode_Selection_2
+  * @{
+  */  
+#define	TIM_TRGO2_RESET                          ((uint32_t)0x00000000)             
+#define	TIM_TRGO2_ENABLE                         ((uint32_t)(TIM_CR2_MMS2_0))          
+#define	TIM_TRGO2_UPDATE                         ((uint32_t)(TIM_CR2_MMS2_1))
+#define	TIM_TRGO2_OC1                            ((uint32_t)(TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))   
+#define	TIM_TRGO2_OC1REF                         ((uint32_t)(TIM_CR2_MMS2_2))           
+#define	TIM_TRGO2_OC2REF                         ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0))          
+#define	TIM_TRGO2_OC3REF                         ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1))           
+#define	TIM_TRGO2_OC4REF                         ((uint32_t)(TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))  
+#define	TIM_TRGO2_OC5REF                         ((uint32_t)(TIM_CR2_MMS2_3))   
+#define	TIM_TRGO2_OC6REF                         ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_0))   
+#define	TIM_TRGO2_OC4REF_RISINGFALLING           ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1))   
+#define	TIM_TRGO2_OC6REF_RISINGFALLING           ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))   
+#define	TIM_TRGO2_OC4REF_RISING_OC6REF_RISING    ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2))   
+#define	TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING   ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_0))   
+#define	TIM_TRGO2_OC5REF_RISING_OC6REF_RISING    ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 |TIM_CR2_MMS2_1))   
+#define	TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING   ((uint32_t)(TIM_CR2_MMS2_3 | TIM_CR2_MMS2_2 | TIM_CR2_MMS2_1 | TIM_CR2_MMS2_0))   
+
+#define IS_TIM_TRGO2_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO2_RESET)                        || \
+                                     ((SOURCE) == TIM_TRGO2_ENABLE)                       || \
+                                     ((SOURCE) == TIM_TRGO2_UPDATE)                       || \
+                                     ((SOURCE) == TIM_TRGO2_OC1)                          || \
+                                     ((SOURCE) == TIM_TRGO2_OC1REF)                       || \
+                                     ((SOURCE) == TIM_TRGO2_OC2REF)                       || \
+                                     ((SOURCE) == TIM_TRGO2_OC3REF)                       || \
+                                     ((SOURCE) == TIM_TRGO2_OC3REF)                       || \
+                                     ((SOURCE) == TIM_TRGO2_OC4REF)                       || \
+                                     ((SOURCE) == TIM_TRGO2_OC5REF)                       || \
+                                     ((SOURCE) == TIM_TRGO2_OC6REF)                       || \
+                                     ((SOURCE) == TIM_TRGO2_OC4REF_RISINGFALLING)         || \
+                                     ((SOURCE) == TIM_TRGO2_OC6REF_RISINGFALLING)         || \
+                                     ((SOURCE) == TIM_TRGO2_OC4REF_RISING_OC6REF_RISING)  || \
+                                     ((SOURCE) == TIM_TRGO2_OC4REF_RISING_OC6REF_FALLING) || \
+                                     ((SOURCE) == TIM_TRGO2_OC5REF_RISING_OC6REF_RISING)  || \
+                                     ((SOURCE) == TIM_TRGO2_OC5REF_RISING_OC6REF_FALLING))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIMEx_Slave_Mode
+  * @{
+  */
+#define TIM_SLAVEMODE_DISABLE                ((uint32_t)0x0000)
+#define TIM_SLAVEMODE_RESET                  ((uint32_t)(TIM_SMCR_SMS_2))
+#define TIM_SLAVEMODE_GATED                  ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_0))
+#define TIM_SLAVEMODE_TRIGGER                ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1))
+#define TIM_SLAVEMODE_EXTERNAL1              ((uint32_t)(TIM_SMCR_SMS_2 | TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0))
+#define TIM_SLAVEMODE_COMBINED_RESETTRIGGER  ((uint32_t)(TIM_SMCR_SMS_3))
+
+#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE)   || \
+                                 ((MODE) == TIM_SLAVEMODE_RESET)     || \
+                                 ((MODE) == TIM_SLAVEMODE_GATED)     || \
+                                 ((MODE) == TIM_SLAVEMODE_TRIGGER)   || \
+                                 ((MODE) == TIM_SLAVEMODE_EXTERNAL1) || \
+                                 ((MODE) == TIM_SLAVEMODE_COMBINED_RESETTRIGGER))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_Event_Source 
+  * @{
+  */
+
+#define TIM_EventSource_Update              TIM_EGR_UG     /*!< Reinitialize the counter and generates an update of the registers */
+#define TIM_EventSource_CC1                 TIM_EGR_CC1G   /*!< A capture/compare event is generated on channel 1 */
+#define TIM_EventSource_CC2                 TIM_EGR_CC2G   /*!< A capture/compare event is generated on channel 2 */
+#define TIM_EventSource_CC3                 TIM_EGR_CC3G   /*!< A capture/compare event is generated on channel 3 */
+#define TIM_EventSource_CC4                 TIM_EGR_CC4G   /*!< A capture/compare event is generated on channel 4 */
+#define TIM_EventSource_COM                 TIM_EGR_COMG   /*!< A commutation event is generated */
+#define TIM_EventSource_Trigger             TIM_EGR_TG     /*!< A trigger event is generated */
+#define TIM_EventSource_Break               TIM_EGR_BG     /*!< A break event is generated */
+#define TIM_EventSource_Break2              TIM_EGR_B2G    /*!< A break 2 event is generated */
+#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFE00) == 0x00000000) && ((SOURCE) != 0x00000000))                                          
+  
+/**
+  * @}
+  */ 
+
+/** @defgroup TIM_DMA_Base_address 
+  * @{
+  */
+
+#define TIM_DMABase_CR1                    (0x00000000)
+#define TIM_DMABase_CR2                    (0x00000001)
+#define TIM_DMABase_SMCR                   (0x00000002)
+#define TIM_DMABase_DIER                   (0x00000003)
+#define TIM_DMABase_SR                     (0x00000004)
+#define TIM_DMABase_EGR                    (0x00000005)
+#define TIM_DMABase_CCMR1                  (0x00000006)
+#define TIM_DMABase_CCMR2                  (0x00000007)
+#define TIM_DMABase_CCER                   (0x00000008)
+#define TIM_DMABase_CNT                    (0x00000009)
+#define TIM_DMABase_PSC                    (0x0000000A)
+#define TIM_DMABase_ARR                    (0x0000000B)
+#define TIM_DMABase_RCR                    (0x0000000C)
+#define TIM_DMABase_CCR1                   (0x0000000D)
+#define TIM_DMABase_CCR2                   (0x0000000E)
+#define TIM_DMABase_CCR3                   (0x0000000F)
+#define TIM_DMABase_CCR4                   (0x00000010)
+#define TIM_DMABase_BDTR                   (0x00000011)
+#define TIM_DMABase_DCR                    (0x00000012)
+#define TIM_DMABase_CCMR3                  (0x00000015)
+#define TIM_DMABase_CCR5                   (0x00000016)
+#define TIM_DMABase_CCR6                   (0x00000017)
+#define TIM_DMABase_OR                     (0x00000018)
+#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABase_CR1)   || \
+                               ((BASE) == TIM_DMABase_CR2)   || \
+                               ((BASE) == TIM_DMABase_SMCR)  || \
+                               ((BASE) == TIM_DMABase_DIER)  || \
+                               ((BASE) == TIM_DMABase_SR)    || \
+                               ((BASE) == TIM_DMABase_EGR)   || \
+                               ((BASE) == TIM_DMABase_CCMR1) || \
+                               ((BASE) == TIM_DMABase_CCMR2) || \
+                               ((BASE) == TIM_DMABase_CCER)  || \
+                               ((BASE) == TIM_DMABase_CNT)   || \
+                               ((BASE) == TIM_DMABase_PSC)   || \
+                               ((BASE) == TIM_DMABase_ARR)   || \
+                               ((BASE) == TIM_DMABase_RCR)   || \
+                               ((BASE) == TIM_DMABase_CCR1)  || \
+                               ((BASE) == TIM_DMABase_CCR2)  || \
+                               ((BASE) == TIM_DMABase_CCR3)  || \
+                               ((BASE) == TIM_DMABase_CCR4)  || \
+                               ((BASE) == TIM_DMABase_BDTR)  || \
+                               ((BASE) == TIM_DMABase_CCMR3) || \
+                               ((BASE) == TIM_DMABase_CCR5)  || \
+                               ((BASE) == TIM_DMABase_CCR6)  || \
+                               ((BASE) == TIM_DMABase_OR))                     
+/**
+  * @}
+  */ 
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx ||                */
+       /* STM32F302xC || STM32F303xC || STM32F358xx || */
+       /* STM32F303x8 || STM32F334x8 || STM32F328xx                   */
+
+#if defined(STM32F302xC)
+/** @defgroup TIMEx_Remap 
+  * @{
+  */
+#define TIM_TIM1_ADC1_NONE                     (0x00000000) /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC1_AWD1                     (0x00000001) /* !< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ADC1_AWD2                     (0x00000002) /* !< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ADC1_AWD3                     (0x00000003) /* !< TIM1_ETR is connected to ADC1 AWD3 */
+#define TIM_TIM16_GPIO                         (0x00000000) /* !< TIM16 TI1 is connected to GPIO */
+#define TIM_TIM16_RTC                          (0x00000001) /* !< TIM16 TI1 is connected to RTC_clock */
+#define TIM_TIM16_HSE                          (0x00000002) /* !< TIM16 TI1 is connected to HSE/32 */
+#define TIM_TIM16_MCO                          (0x00000003) /* !< TIM16 TI1 is connected to MCO */
+
+#define IS_TIM_REMAP(REMAP)    (((REMAP) == TIM_TIM1_ADC1_NONE) ||\
+                                ((REMAP) == TIM_TIM1_ADC1_AWD1) ||\
+                                ((REMAP) == TIM_TIM1_ADC1_AWD2) ||\
+                                ((REMAP) == TIM_TIM1_ADC1_AWD3) ||\
+                                ((REMAP) == TIM_TIM16_GPIO)     ||\
+                                ((REMAP) == TIM_TIM16_RTC)      ||\
+                                ((REMAP) == TIM_TIM16_HSE)      ||\
+                                ((REMAP) == TIM_TIM16_MCO))
+/**
+  * @}
+  */ 
+#endif /* STM32F302xC */
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+/** @defgroup TIMEx_Remap
+  * @{
+  */
+#define TIM_TIM1_ADC1_NONE                     (0x00000000) /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC1_AWD1                     (0x00000001) /* !< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ADC1_AWD2                     (0x00000002) /* !< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ADC1_AWD3                     (0x00000003) /* !< TIM1_ETR is connected to ADC1 AWD3 */
+#define TIM_TIM8_ADC2_NONE                     (0x00000000) /* !< TIM8_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM8_ADC2_AWD1                     (0x00000001) /* !< TIM8_ETR is connected to ADC2 AWD1 */
+#define TIM_TIM8_ADC2_AWD2                     (0x00000002) /* !< TIM8_ETR is connected to ADC2 AWD2 */
+#define TIM_TIM8_ADC2_AWD3                     (0x00000003) /* !< TIM8_ETR is connected to ADC2 AWD3 */
+#define TIM_TIM16_GPIO                         (0x00000000) /* !< TIM16 TI1 is connected to GPIO */
+#define TIM_TIM16_RTC                          (0x00000001) /* !< TIM16 TI1 is connected to RTC_clock */
+#define TIM_TIM16_HSE                          (0x00000002) /* !< TIM16 TI1 is connected to HSE/32 */
+#define TIM_TIM16_MCO                          (0x00000003) /* !< TIM16 TI1 is connected to MCO */
+
+#define IS_TIM_REMAP(REMAP1)   (((REMAP1) == TIM_TIM1_ADC1_NONE) ||\
+                                ((REMAP1) == TIM_TIM1_ADC1_AWD1) ||\
+                                ((REMAP1) == TIM_TIM1_ADC1_AWD2) ||\
+                                ((REMAP1) == TIM_TIM1_ADC1_AWD3) ||\
+                                ((REMAP1) == TIM_TIM8_ADC2_NONE) ||\
+                                ((REMAP1) == TIM_TIM8_ADC2_AWD1) ||\
+                                ((REMAP1) == TIM_TIM8_ADC2_AWD2) ||\
+                                ((REMAP1) == TIM_TIM8_ADC2_AWD3) ||\
+                                ((REMAP1) == TIM_TIM16_GPIO)     ||\
+                                ((REMAP1) == TIM_TIM16_RTC)      ||\
+                                ((REMAP1) == TIM_TIM16_HSE)      ||\
+                                ((REMAP1) == TIM_TIM16_MCO))
+/**
+  * @}
+  */ 
+
+/** @defgroup TIMEx_Remap2
+  * @{
+  */
+#define TIM_TIM1_ADC4_NONE                     (0x00000000) /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC4_AWD1                     (0x00000004) /* !< TIM1_ETR is connected to ADC4 AWD1 */
+#define TIM_TIM1_ADC4_AWD2                     (0x00000008) /* !< TIM1_ETR is connected to ADC4 AWD2 */
+#define TIM_TIM1_ADC4_AWD3                     (0x0000000C) /* !< TIM1_ETR is connected to ADC4 AWD3 */
+#define TIM_TIM8_ADC3_NONE                     (0x00000000) /* !< TIM8_ETR is not connected to any AWD (analog watchdog) */
+#define TIM_TIM8_ADC3_AWD1                     (0x00000004) /* !< TIM8_ETR is connected to ADC3 AWD1 */
+#define TIM_TIM8_ADC3_AWD2                     (0x00000008) /* !< TIM8_ETR is connected to ADC3 AWD2 */
+#define TIM_TIM8_ADC3_AWD3                     (0x0000000C) /* !< TIM8_ETR is connected to ADC3 AWD3 */
+#define TIM_TIM16_NONE                         (0x00000000) /* !< Non significant value for TIM16 */
+
+#define IS_TIM_REMAP2(REMAP2)  (((REMAP2) == TIM_TIM1_ADC4_NONE) ||\
+                                ((REMAP2) == TIM_TIM1_ADC4_AWD1) ||\
+                                ((REMAP2) == TIM_TIM1_ADC4_AWD2) ||\
+                                ((REMAP2) == TIM_TIM1_ADC4_AWD3) ||\
+                                ((REMAP2) == TIM_TIM8_ADC3_NONE) ||\
+                                ((REMAP2) == TIM_TIM8_ADC3_AWD1) ||\
+                                ((REMAP2) == TIM_TIM8_ADC3_AWD2) ||\
+                                ((REMAP2) == TIM_TIM8_ADC3_AWD3) ||\
+                                ((REMAP2) == TIM_TIM16_NONE))
+/**
+  * @}
+  */ 
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/** @defgroup TIMEx_Remap 
+  * @{
+  */
+
+#define TIM_TIM2_TIM8_TRGO      (0x00000000)  /*!< TIM8 TRGOUT is connected to TIM2_ITR1 */
+#define TIM_TIM2_ETH_PTP        (0x00000400)  /*!< PTP trigger output is connected to TIM2_ITR1 */
+#define TIM_TIM2_USBFS_SOF      (0x00000800)  /*!< OTG FS SOF is connected to the TIM2_ITR1 input */
+#define TIM_TIM2_USBHS_SOF      (0x00000C00)  /*!< OTG HS SOF is connected to the TIM2_ITR1 input */
+#define TIM_TIM14_GPIO          (0x00000000) /* !< TIM14 TI1 is connected to GPIO */
+#define TIM_TIM14_RTC           (0x00000001) /* !< TIM14 TI1 is connected to RTC_clock */
+#define TIM_TIM14_HSE           (0x00000002) /* !< TIM14 TI1 is connected to HSE/32 */
+#define TIM_TIM14_MCO           (0x00000003) /* !< TIM14 TI1 is connected to MCO */
+
+#define IS_TIM_REMAP(REMAP)    (((REMAP) == TIM_TIM2_TIM8_TRGO)  ||\
+                                ((REMAP) == TIM_TIM2_ETH_PTP)    ||\
+                                ((REMAP) == TIM_TIM2_USBFS_SOF)  ||\
+                                ((REMAP) == TIM_TIM2_USBHS_SOF)  ||\
+                                ((REMAP) == TIM_TIM14_GPIO)      ||\
+                                ((REMAP) == TIM_TIM14_RTC)       ||\
+                                ((REMAP) == TIM_TIM14_HSE)       ||\
+                                ((REMAP) == TIM_TIM14_MCO))
+
+/**
+  * @}
+  */ 
+#endif /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx)
+/** @defgroup TIMEx_Remap 
+  * @{
+  */
+#define TIM_TIM1_ADC1_NONE                     (0x00000000) /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC1_AWD1                     (0x00000001) /* !< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ADC1_AWD2                     (0x00000002) /* !< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ADC1_AWD3                     (0x00000003) /* !< TIM1_ETR is connected to ADC1 AWD3 */
+#define TIM_TIM16_GPIO                         (0x00000000) /* !< TIM16 TI1 is connected to GPIO */
+#define TIM_TIM16_RTC                          (0x00000001) /* !< TIM16 TI1 is connected to RTC_clock */
+#define TIM_TIM16_HSE                          (0x00000002) /* !< TIM16 TI1 is connected to HSE/32 */
+#define TIM_TIM16_MCO                          (0x00000003) /* !< TIM16 TI1 is connected to MCO */
+
+#define IS_TIM_REMAP(REMAP)    (((REMAP) == TIM_TIM1_ADC1_NONE) ||\
+                                ((REMAP) == TIM_TIM1_ADC1_AWD1) ||\
+                                ((REMAP) == TIM_TIM1_ADC1_AWD2) ||\
+                                ((REMAP) == TIM_TIM1_ADC1_AWD3) ||\
+                                ((REMAP) == TIM_TIM16_GPIO)     ||\
+                                ((REMAP) == TIM_TIM16_RTC)      ||\
+                                ((REMAP) == TIM_TIM16_HSE)      ||\
+                                ((REMAP) == TIM_TIM16_MCO))
+/**
+  * @}
+  */
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx */
+
+#if defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+/** @defgroup TIMEx_Remap
+  * @{
+  */
+#define TIM_TIM1_ADC1_NONE                     (0x00000000) /* !< TIM1_ETR is not connected to any AWD (analog watchdog)*/
+#define TIM_TIM1_ADC1_AWD1                     (0x00000001) /* !< TIM1_ETR is connected to ADC1 AWD1 */
+#define TIM_TIM1_ADC1_AWD2                     (0x00000002) /* !< TIM1_ETR is connected to ADC1 AWD2 */
+#define TIM_TIM1_ADC1_AWD3                     (0x00000003) /* !< TIM1_ETR is connected to ADC1 AWD3 */
+
+#define IS_TIM_REMAP(REMAP)    (((REMAP) == TIM_TIM1_ADC1_NONE) ||\
+                                ((REMAP) == TIM_TIM1_ADC1_AWD1) ||\
+                                ((REMAP) == TIM_TIM1_ADC1_AWD2) ||\
+                                ((REMAP) == TIM_TIM1_ADC1_AWD3))
+/**
+  * @}
+  */
+#endif /* STM32F303x8 || STM32F334x8 || STM32F328xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) ||                        \
+    defined(STM32F302xC) || defined(STM32F303xC) ||defined(STM32F358xx) || \
+    defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+/** @defgroup TIMEx_Group_Channel5 
+  * @{
+  */
+#define TIM_GROUPCH5_NONE       (uint32_t)0x00000000  /* !< No effect of OC5REF on OC1REFC, OC2REFC and OC3REFC */
+#define TIM_GROUPCH5_OC1REFC    (TIM_CCR5_GC5C1)      /* !< OC1REFC is the logical AND of OC1REFC and OC5REF */
+#define TIM_GROUPCH5_OC2REFC    (TIM_CCR5_GC5C2)      /* !< OC2REFC is the logical AND of OC2REFC and OC5REF */
+#define TIM_GROUPCH5_OC3REFC    (TIM_CCR5_GC5C3)       /* !< OC3REFC is the logical AND of OC3REFC and OC5REF */
+
+#define IS_TIM_GROUPCH5(OCREF) ((((OCREF) & 0x1FFFFFFF) == 0x00000000))
+/**
+  * @}
+  */
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx ||                */
+       /* STM32F302xC || STM32F303xC || STM32F358xx || */
+       /* STM32F303x8 || STM32F334x8 || STM32F328xx                   */
+/**
+  * @}
+  */ 
+
+/* Exported macro ------------------------------------------------------------*/
+#if defined(STM32F373xC) || defined(STM32F378xx)
+/**
+  * @brief  Sets the TIM Capture Compare Register value on runtime without
+  *         calling another time ConfigChannel function.
+  * @param  __HANDLE__: TIM handle.
+  * @param  __CHANNEL__ : TIM Channels to be configured.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  * @param  __COMPARE__: specifies the Capture Compare register new value.
+  * @retval None
+  */
+#define __HAL_TIM_SetCompare(__HANDLE__, __CHANNEL__, __COMPARE__) \
+(*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)) = (__COMPARE__))
+
+/**
+  * @brief  Gets the TIM Capture Compare Register value on runtime
+  * @param  __HANDLE__: TIM handle.
+  * @param  __CHANNEL__ : TIM Channel associated with the capture compare register
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: get capture/compare 1 register value
+  *            @arg TIM_CHANNEL_2: get capture/compare 2 register value
+  *            @arg TIM_CHANNEL_3: get capture/compare 3 register value
+  *            @arg TIM_CHANNEL_4: get capture/compare 4 register value
+  * @retval None
+  */
+#define __HAL_TIM_GetCompare(__HANDLE__, __CHANNEL__) \
+  (*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)))
+#endif /* STM32F373xC || STM32F378xx */
+   
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) ||                        \
+    defined(STM32F302xC) || defined(STM32F303xC) ||defined(STM32F358xx) || \
+    defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+/**
+  * @brief  Sets the TIM Capture Compare Register value on runtime without
+  *         calling another time ConfigChannel function.
+  * @param  __HANDLE__: TIM handle.
+  * @param  __CHANNEL__ : TIM Channels to be configured.
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: TIM Channel 1 selected
+  *            @arg TIM_CHANNEL_2: TIM Channel 2 selected
+  *            @arg TIM_CHANNEL_3: TIM Channel 3 selected
+  *            @arg TIM_CHANNEL_4: TIM Channel 4 selected
+  *            @arg TIM_CHANNEL_5: TIM Channel 5 selected
+  *            @arg TIM_CHANNEL_6: TIM Channel 6 selected
+  * @param  __COMPARE__: specifies the Capture Compare register new value.
+  * @retval None
+  */
+#define __HAL_TIM_SetCompare(__HANDLE__, __CHANNEL__, __COMPARE__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4 = (__COMPARE__)) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5 = (__COMPARE__)) :\
+ ((__HANDLE__)->Instance->CCR6 |= (__COMPARE__)))
+
+/**
+  * @brief  Gets the TIM Capture Compare Register value on runtime
+  * @param  __HANDLE__: TIM handle.
+  * @param  __CHANNEL__ : TIM Channel associated with the capture compare register
+  *          This parameter can be one of the following values:
+  *            @arg TIM_CHANNEL_1: get capture/compare 1 register value
+  *            @arg TIM_CHANNEL_2: get capture/compare 2 register value
+  *            @arg TIM_CHANNEL_3: get capture/compare 3 register value
+  *            @arg TIM_CHANNEL_4: get capture/compare 4 register value
+  *            @arg TIM_CHANNEL_5: get capture/compare 5 register value
+  *            @arg TIM_CHANNEL_6: get capture/compare 6 register value
+  * @retval None
+  */
+#define __HAL_TIM_GetCompare(__HANDLE__, __CHANNEL__) \
+(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCR1) :\
+ ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCR2) :\
+ ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCR3) :\
+ ((__CHANNEL__) == TIM_CHANNEL_4) ? ((__HANDLE__)->Instance->CCR4) :\
+ ((__CHANNEL__) == TIM_CHANNEL_5) ? ((__HANDLE__)->Instance->CCR5) :\
+ ((__HANDLE__)->Instance->CCR6))
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx ||                */
+       /* STM32F302xC || STM32F303xC || STM32F358xx || */
+       /* STM32F303x8 || STM32F334x8 || STM32F328xx                   */
+
+/* Exported functions --------------------------------------------------------*/
+
+/*  Timer Hall Sensor functions  **********************************************/
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim);
+
+void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim);
+
+ /* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim);
+
+/*  Timer Complementary Output Compare functions  *****************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/*  Timer Complementary PWM functions  ****************************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel);
+/* Non-Blocking mode: DMA */
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length);
+HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel);
+
+/*  Timer Complementary One Pulse functions  **********************************/
+/* Blocking mode: Polling */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Non-Blocking mode: Interrupt */
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel);
+
+/* Extnsion Control functions  ************************************************/
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t  InputTrigger, uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t  InputTrigger, uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t  InputTrigger, uint32_t  CommutationSource);
+HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig);
+HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig);
+
+#if defined(STM32F303xC) || defined(STM32F358xx)
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap1, uint32_t Remap2);
+#endif /* STM32F303xC || STM32F358xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) || \
+    defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx) || \
+    defined(STM32F373xC) || defined(STM32F378xx)
+HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap);
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx || */
+       /* STM32F303x8 || STM32F334x8 || STM32F328xx || */
+       /* STM32F373xC || STM32F378xx */
+
+#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F318xx) ||                        \
+    defined(STM32F302xC) || defined(STM32F303xC) ||defined(STM32F358xx) || \
+    defined(STM32F303x8) || defined(STM32F334x8) || defined(STM32F328xx)
+HAL_StatusTypeDef HAL_TIMEx_GroupChannel5(TIM_HandleTypeDef *htim, uint32_t Channels);
+#endif /* STM32F301x8 || STM32F302x8 || STM32F318xx ||                */
+       /* STM32F302xC || STM32F303xC || STM32F358xx || */
+       /* STM32F303x8 || STM32F334x8 || STM32F328xx                   */
+
+
+/* Extension Callback *********************************************************/
+void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim);
+void HAL_TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma);
+
+/* Extension Peripheral State functions  **************************************/
+HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim);
+
+/**
+  * @}
+  */ 
+
+/**
+  * @}
+  */
+  
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* __STM32F3xx_HAL_TIM_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/