mbed - my fork

Users » filartrix » Code » mbed

my fork

TARGET_NUCLEO_F334R8/stm32f3xx_hal_uart.h@92:4fc01daae5a5, 2014-11-27 (annotated)

Committer:: bogdanm
Date:: Thu Nov 27 13:33:22 2014 +0000
Revision:: 92:4fc01daae5a5
Parent:: 86:04dd9b1680ae

Release 92 of the mbed libray



Main changes:



- nRF51822: fixed pin assignment issues

- ST targets moving to the STM32Cube driver

- LPC1439: fixed serial interrupt issue

- first Cortex-A platform supported in mbed (RZ_A1H)

Who changed what in which revision?

User	Revision	Line number	New contents of line
bogdanm	86:04dd9b1680ae	1	/**
bogdanm	86:04dd9b1680ae	2	******************************************************************************
bogdanm	86:04dd9b1680ae	3	* @file stm32f3xx_hal_uart.h
bogdanm	86:04dd9b1680ae	4	* @author MCD Application Team
bogdanm	92:4fc01daae5a5	5	* @version V1.1.0
bogdanm	92:4fc01daae5a5	6	* @date 12-Sept-2014
bogdanm	86:04dd9b1680ae	7	* @brief Header file of UART HAL module.
bogdanm	86:04dd9b1680ae	8	******************************************************************************
bogdanm	86:04dd9b1680ae	9	* @attention
bogdanm	86:04dd9b1680ae	10	*
bogdanm	86:04dd9b1680ae	11	* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
bogdanm	86:04dd9b1680ae	12	*
bogdanm	86:04dd9b1680ae	13	* Redistribution and use in source and binary forms, with or without modification,
bogdanm	86:04dd9b1680ae	14	* are permitted provided that the following conditions are met:
bogdanm	86:04dd9b1680ae	15	* 1. Redistributions of source code must retain the above copyright notice,
bogdanm	86:04dd9b1680ae	16	* this list of conditions and the following disclaimer.
bogdanm	86:04dd9b1680ae	17	* 2. Redistributions in binary form must reproduce the above copyright notice,
bogdanm	86:04dd9b1680ae	18	* this list of conditions and the following disclaimer in the documentation
bogdanm	86:04dd9b1680ae	19	* and/or other materials provided with the distribution.
bogdanm	86:04dd9b1680ae	20	* 3. Neither the name of STMicroelectronics nor the names of its contributors
bogdanm	86:04dd9b1680ae	21	* may be used to endorse or promote products derived from this software
bogdanm	86:04dd9b1680ae	22	* without specific prior written permission.
bogdanm	86:04dd9b1680ae	23	*
bogdanm	86:04dd9b1680ae	24	* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
bogdanm	86:04dd9b1680ae	25	* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
bogdanm	86:04dd9b1680ae	26	* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
bogdanm	86:04dd9b1680ae	27	* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
bogdanm	86:04dd9b1680ae	28	* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
bogdanm	86:04dd9b1680ae	29	* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
bogdanm	86:04dd9b1680ae	30	* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
bogdanm	86:04dd9b1680ae	31	* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
bogdanm	86:04dd9b1680ae	32	* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
bogdanm	86:04dd9b1680ae	33	* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
bogdanm	86:04dd9b1680ae	34	*
bogdanm	86:04dd9b1680ae	35	******************************************************************************
bogdanm	86:04dd9b1680ae	36	*/
bogdanm	86:04dd9b1680ae	37
bogdanm	86:04dd9b1680ae	38	/* Define to prevent recursive inclusion -------------------------------------*/
bogdanm	86:04dd9b1680ae	39	#ifndef __STM32F3xx_HAL_UART_H
bogdanm	86:04dd9b1680ae	40	#define __STM32F3xx_HAL_UART_H
bogdanm	86:04dd9b1680ae	41
bogdanm	86:04dd9b1680ae	42	#ifdef __cplusplus
bogdanm	86:04dd9b1680ae	43	extern "C" {
bogdanm	86:04dd9b1680ae	44	#endif
bogdanm	86:04dd9b1680ae	45
bogdanm	86:04dd9b1680ae	46	/* Includes ------------------------------------------------------------------*/
bogdanm	86:04dd9b1680ae	47	#include "stm32f3xx_hal_def.h"
bogdanm	86:04dd9b1680ae	48
bogdanm	86:04dd9b1680ae	49	/** @addtogroup STM32F3xx_HAL_Driver
bogdanm	86:04dd9b1680ae	50	* @{
bogdanm	86:04dd9b1680ae	51	*/
bogdanm	86:04dd9b1680ae	52
bogdanm	86:04dd9b1680ae	53	/** @addtogroup UART
bogdanm	86:04dd9b1680ae	54	* @{
bogdanm	86:04dd9b1680ae	55	*/
bogdanm	86:04dd9b1680ae	56
bogdanm	86:04dd9b1680ae	57	/* Exported types ------------------------------------------------------------*/
bogdanm	92:4fc01daae5a5	58	/** @defgroup UART_Exported_Types UART Exported Types
bogdanm	92:4fc01daae5a5	59	* @{
bogdanm	92:4fc01daae5a5	60	*/
bogdanm	86:04dd9b1680ae	61
bogdanm	86:04dd9b1680ae	62	/**
bogdanm	86:04dd9b1680ae	63	* @brief UART Init Structure definition
bogdanm	86:04dd9b1680ae	64	*/
bogdanm	86:04dd9b1680ae	65	typedef struct
bogdanm	86:04dd9b1680ae	66	{
bogdanm	86:04dd9b1680ae	67	uint32_t BaudRate; /*!< This member configures the UART communication baud rate.
bogdanm	86:04dd9b1680ae	68	The baud rate register is computed using the following formula:
bogdanm	86:04dd9b1680ae	69	- If oversampling is 16 or in LIN mode,
bogdanm	86:04dd9b1680ae	70	Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate)))
bogdanm	86:04dd9b1680ae	71	- If oversampling is 8,
bogdanm	86:04dd9b1680ae	72	Baud Rate Register[15:4] = ((2 * PCLKx) / ((huart->Init.BaudRate)))[15:4]
bogdanm	86:04dd9b1680ae	73	Baud Rate Register[3] = 0
bogdanm	86:04dd9b1680ae	74	Baud Rate Register[2:0] = (((2 * PCLKx) / ((huart->Init.BaudRate)))[3:0]) >> 1 */
bogdanm	86:04dd9b1680ae	75
bogdanm	86:04dd9b1680ae	76	uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame.
bogdanm	86:04dd9b1680ae	77	This parameter can be a value of @ref UARTEx_Word_Length */
bogdanm	86:04dd9b1680ae	78
bogdanm	86:04dd9b1680ae	79	uint32_t StopBits; /*!< Specifies the number of stop bits transmitted.
bogdanm	86:04dd9b1680ae	80	This parameter can be a value of @ref UART_Stop_Bits */
bogdanm	86:04dd9b1680ae	81
bogdanm	86:04dd9b1680ae	82	uint32_t Parity; /*!< Specifies the parity mode.
bogdanm	86:04dd9b1680ae	83	This parameter can be a value of @ref UART_Parity
bogdanm	86:04dd9b1680ae	84	@note When parity is enabled, the computed parity is inserted
bogdanm	86:04dd9b1680ae	85	at the MSB position of the transmitted data (9th bit when
bogdanm	86:04dd9b1680ae	86	the word length is set to 9 data bits; 8th bit when the
bogdanm	86:04dd9b1680ae	87	word length is set to 8 data bits). */
bogdanm	86:04dd9b1680ae	88
bogdanm	92:4fc01daae5a5	89	uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled.
bogdanm	86:04dd9b1680ae	90	This parameter can be a value of @ref UART_Mode */
bogdanm	86:04dd9b1680ae	91
bogdanm	92:4fc01daae5a5	92	uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled
bogdanm	86:04dd9b1680ae	93	or disabled.
bogdanm	86:04dd9b1680ae	94	This parameter can be a value of @ref UART_Hardware_Flow_Control */
bogdanm	86:04dd9b1680ae	95
bogdanm	92:4fc01daae5a5	96	uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8).
bogdanm	86:04dd9b1680ae	97	This parameter can be a value of @ref UART_Over_Sampling */
bogdanm	86:04dd9b1680ae	98
bogdanm	92:4fc01daae5a5	99	uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected.
bogdanm	86:04dd9b1680ae	100	Selecting the single sample method increases the receiver tolerance to clock
bogdanm	86:04dd9b1680ae	101	deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */
bogdanm	86:04dd9b1680ae	102	}UART_InitTypeDef;
bogdanm	86:04dd9b1680ae	103
bogdanm	86:04dd9b1680ae	104	/**
bogdanm	86:04dd9b1680ae	105	* @brief UART Advanced Features initalization structure definition
bogdanm	86:04dd9b1680ae	106	*/
bogdanm	86:04dd9b1680ae	107	typedef struct
bogdanm	86:04dd9b1680ae	108	{
bogdanm	86:04dd9b1680ae	109	uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several
bogdanm	86:04dd9b1680ae	110	Advanced Features may be initialized at the same time .
bogdanm	86:04dd9b1680ae	111	This parameter can be a value of @ref UART_Advanced_Features_Initialization_Type */
bogdanm	86:04dd9b1680ae	112
bogdanm	86:04dd9b1680ae	113	uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted.
bogdanm	86:04dd9b1680ae	114	This parameter can be a value of @ref UART_Tx_Inv */
bogdanm	86:04dd9b1680ae	115
bogdanm	86:04dd9b1680ae	116	uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted.
bogdanm	86:04dd9b1680ae	117	This parameter can be a value of @ref UART_Rx_Inv */
bogdanm	86:04dd9b1680ae	118
bogdanm	86:04dd9b1680ae	119	uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic
bogdanm	86:04dd9b1680ae	120	vs negative/inverted logic).
bogdanm	86:04dd9b1680ae	121	This parameter can be a value of @ref UART_Data_Inv */
bogdanm	86:04dd9b1680ae	122
bogdanm	86:04dd9b1680ae	123	uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped.
bogdanm	86:04dd9b1680ae	124	This parameter can be a value of @ref UART_Rx_Tx_Swap */
bogdanm	86:04dd9b1680ae	125
bogdanm	86:04dd9b1680ae	126	uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled.
bogdanm	86:04dd9b1680ae	127	This parameter can be a value of @ref UART_Overrun_Disable */
bogdanm	86:04dd9b1680ae	128
bogdanm	86:04dd9b1680ae	129	uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error.
bogdanm	86:04dd9b1680ae	130	This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error */
bogdanm	86:04dd9b1680ae	131
bogdanm	86:04dd9b1680ae	132	uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled.
bogdanm	86:04dd9b1680ae	133	This parameter can be a value of @ref UART_AutoBaudRate_Enable */
bogdanm	86:04dd9b1680ae	134
bogdanm	86:04dd9b1680ae	135	uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate
bogdanm	86:04dd9b1680ae	136	detection is carried out.
bogdanm	92:4fc01daae5a5	137	This parameter can be a value of @ref UART_AutoBaud_Rate_Mode */
bogdanm	86:04dd9b1680ae	138
bogdanm	86:04dd9b1680ae	139	uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line.
bogdanm	86:04dd9b1680ae	140	This parameter can be a value of @ref UART_MSB_First */
bogdanm	86:04dd9b1680ae	141	} UART_AdvFeatureInitTypeDef;
bogdanm	86:04dd9b1680ae	142
bogdanm	86:04dd9b1680ae	143	/**
bogdanm	86:04dd9b1680ae	144	* @brief UART wake up from stop mode parameters
bogdanm	86:04dd9b1680ae	145	*/
bogdanm	86:04dd9b1680ae	146	typedef struct
bogdanm	86:04dd9b1680ae	147	{
bogdanm	86:04dd9b1680ae	148	uint32_t WakeUpEvent; /*!< Specifies which event will activat the Wakeup from Stop mode flag (WUF).
bogdanm	86:04dd9b1680ae	149	This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection.
bogdanm	86:04dd9b1680ae	150	If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must
bogdanm	86:04dd9b1680ae	151	be filled up. */
bogdanm	86:04dd9b1680ae	152
bogdanm	86:04dd9b1680ae	153	uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long.
bogdanm	86:04dd9b1680ae	154	This parameter can be a value of @ref UART_WakeUp_Address_Length */
bogdanm	86:04dd9b1680ae	155
bogdanm	86:04dd9b1680ae	156	uint8_t Address; /!< UART/USART node address (7-bit long max) /
bogdanm	86:04dd9b1680ae	157	} UART_WakeUpTypeDef;
bogdanm	86:04dd9b1680ae	158
bogdanm	86:04dd9b1680ae	159	/**
bogdanm	86:04dd9b1680ae	160	* @brief HAL UART State structures definition
bogdanm	86:04dd9b1680ae	161	*/
bogdanm	86:04dd9b1680ae	162	typedef enum
bogdanm	86:04dd9b1680ae	163	{
bogdanm	86:04dd9b1680ae	164	HAL_UART_STATE_RESET = 0x00, /!< Peripheral is not initialized /
bogdanm	86:04dd9b1680ae	165	HAL_UART_STATE_READY = 0x01, /!< Peripheral Initialized and ready for use /
bogdanm	86:04dd9b1680ae	166	HAL_UART_STATE_BUSY = 0x02, /!< an internal process is ongoing /
bogdanm	86:04dd9b1680ae	167	HAL_UART_STATE_BUSY_TX = 0x12, /!< Data Transmission process is ongoing /
bogdanm	86:04dd9b1680ae	168	HAL_UART_STATE_BUSY_RX = 0x22, /!< Data Reception process is ongoing /
bogdanm	86:04dd9b1680ae	169	HAL_UART_STATE_BUSY_TX_RX = 0x32, /!< Data Transmission and Reception process is ongoing /
bogdanm	86:04dd9b1680ae	170	HAL_UART_STATE_TIMEOUT = 0x03, /!< Timeout state /
bogdanm	86:04dd9b1680ae	171	HAL_UART_STATE_ERROR = 0x04 /!< Error /
bogdanm	86:04dd9b1680ae	172	}HAL_UART_StateTypeDef;
bogdanm	86:04dd9b1680ae	173
bogdanm	86:04dd9b1680ae	174	/**
bogdanm	86:04dd9b1680ae	175	* @brief HAL UART Error Code structure definition
bogdanm	86:04dd9b1680ae	176	*/
bogdanm	86:04dd9b1680ae	177	typedef enum
bogdanm	86:04dd9b1680ae	178	{
bogdanm	86:04dd9b1680ae	179	HAL_UART_ERROR_NONE = 0x00, /!< No error /
bogdanm	86:04dd9b1680ae	180	HAL_UART_ERROR_PE = 0x01, /!< Parity error /
bogdanm	86:04dd9b1680ae	181	HAL_UART_ERROR_NE = 0x02, /!< Noise error /
bogdanm	86:04dd9b1680ae	182	HAL_UART_ERROR_FE = 0x04, /!< frame error /
bogdanm	86:04dd9b1680ae	183	HAL_UART_ERROR_ORE = 0x08, /!< Overrun error /
bogdanm	86:04dd9b1680ae	184	HAL_UART_ERROR_DMA = 0x10 /!< DMA transfer error /
bogdanm	86:04dd9b1680ae	185	}HAL_UART_ErrorTypeDef;
bogdanm	86:04dd9b1680ae	186
bogdanm	86:04dd9b1680ae	187	/**
bogdanm	86:04dd9b1680ae	188	* @brief UART clock sources definition
bogdanm	86:04dd9b1680ae	189	*/
bogdanm	86:04dd9b1680ae	190	typedef enum
bogdanm	86:04dd9b1680ae	191	{
bogdanm	86:04dd9b1680ae	192	UART_CLOCKSOURCE_PCLK1 = 0x00, /!< PCLK1 clock source /
bogdanm	86:04dd9b1680ae	193	UART_CLOCKSOURCE_PCLK2 = 0x01, /!< PCLK2 clock source /
bogdanm	86:04dd9b1680ae	194	UART_CLOCKSOURCE_HSI = 0x02, /!< HSI clock source /
bogdanm	86:04dd9b1680ae	195	UART_CLOCKSOURCE_SYSCLK = 0x04, /!< SYSCLK clock source /
bogdanm	86:04dd9b1680ae	196	UART_CLOCKSOURCE_LSE = 0x08, /!< LSE clock source /
bogdanm	86:04dd9b1680ae	197	UART_CLOCKSOURCE_UNDEFINED = 0x10 /!< Undefined clock source /
bogdanm	86:04dd9b1680ae	198	}UART_ClockSourceTypeDef;
bogdanm	86:04dd9b1680ae	199
bogdanm	86:04dd9b1680ae	200	/**
bogdanm	86:04dd9b1680ae	201	* @brief UART handle Structure definition
bogdanm	86:04dd9b1680ae	202	*/
bogdanm	86:04dd9b1680ae	203	typedef struct
bogdanm	86:04dd9b1680ae	204	{
bogdanm	86:04dd9b1680ae	205	USART_TypeDef Instance; / UART registers base address */
bogdanm	86:04dd9b1680ae	206
bogdanm	86:04dd9b1680ae	207	UART_InitTypeDef Init; /* UART communication parameters */
bogdanm	86:04dd9b1680ae	208
bogdanm	86:04dd9b1680ae	209	UART_AdvFeatureInitTypeDef AdvancedInit; /* UART Advanced Features initialization parameters */
bogdanm	86:04dd9b1680ae	210
bogdanm	86:04dd9b1680ae	211	uint8_t pTxBuffPtr; / Pointer to UART Tx transfer Buffer */
bogdanm	86:04dd9b1680ae	212
bogdanm	86:04dd9b1680ae	213	uint16_t TxXferSize; /* UART Tx Transfer size */
bogdanm	86:04dd9b1680ae	214
bogdanm	86:04dd9b1680ae	215	uint16_t TxXferCount; /* UART Tx Transfer Counter */
bogdanm	86:04dd9b1680ae	216
bogdanm	86:04dd9b1680ae	217	uint8_t pRxBuffPtr; / Pointer to UART Rx transfer Buffer */
bogdanm	86:04dd9b1680ae	218
bogdanm	86:04dd9b1680ae	219	uint16_t RxXferSize; /* UART Rx Transfer size */
bogdanm	86:04dd9b1680ae	220
bogdanm	86:04dd9b1680ae	221	uint16_t RxXferCount; /* UART Rx Transfer Counter */
bogdanm	86:04dd9b1680ae	222
bogdanm	86:04dd9b1680ae	223	uint16_t Mask; /* UART Rx RDR register mask */
bogdanm	86:04dd9b1680ae	224
bogdanm	86:04dd9b1680ae	225	DMA_HandleTypeDef hdmatx; / UART Tx DMA Handle parameters */
bogdanm	86:04dd9b1680ae	226
bogdanm	86:04dd9b1680ae	227	DMA_HandleTypeDef hdmarx; / UART Rx DMA Handle parameters */
bogdanm	86:04dd9b1680ae	228
bogdanm	86:04dd9b1680ae	229	HAL_LockTypeDef Lock; /* Locking object */
bogdanm	86:04dd9b1680ae	230
bogdanm	86:04dd9b1680ae	231	HAL_UART_StateTypeDef State; /* UART communication state */
bogdanm	86:04dd9b1680ae	232
bogdanm	86:04dd9b1680ae	233	HAL_UART_ErrorTypeDef ErrorCode; /* UART Error code */
bogdanm	86:04dd9b1680ae	234
bogdanm	86:04dd9b1680ae	235	}UART_HandleTypeDef;
bogdanm	86:04dd9b1680ae	236
bogdanm	92:4fc01daae5a5	237	/**
bogdanm	92:4fc01daae5a5	238	* @}
bogdanm	92:4fc01daae5a5	239	*/
bogdanm	86:04dd9b1680ae	240
bogdanm	86:04dd9b1680ae	241	/* Exported constants --------------------------------------------------------*/
bogdanm	92:4fc01daae5a5	242	/** @defgroup UART_Exported_Constants UART Exported Constants
bogdanm	86:04dd9b1680ae	243	* @{
bogdanm	86:04dd9b1680ae	244	*/
bogdanm	86:04dd9b1680ae	245
bogdanm	86:04dd9b1680ae	246	/** @defgroup UART_Stop_Bits UART Number of Stop Bits
bogdanm	86:04dd9b1680ae	247	* @{
bogdanm	86:04dd9b1680ae	248	*/
bogdanm	86:04dd9b1680ae	249	#define UART_STOPBITS_1 ((uint32_t)0x0000)
bogdanm	86:04dd9b1680ae	250	#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1)
bogdanm	86:04dd9b1680ae	251	#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) \|\| \
bogdanm	86:04dd9b1680ae	252	((STOPBITS) == UART_STOPBITS_2))
bogdanm	86:04dd9b1680ae	253	/**
bogdanm	86:04dd9b1680ae	254	* @}
bogdanm	86:04dd9b1680ae	255	*/
bogdanm	86:04dd9b1680ae	256
bogdanm	86:04dd9b1680ae	257	/** @defgroup UART_Parity UART Parity
bogdanm	86:04dd9b1680ae	258	* @{
bogdanm	86:04dd9b1680ae	259	*/
bogdanm	86:04dd9b1680ae	260	#define UART_PARITY_NONE ((uint32_t)0x0000)
bogdanm	86:04dd9b1680ae	261	#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE)
bogdanm	86:04dd9b1680ae	262	#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE \| USART_CR1_PS))
bogdanm	86:04dd9b1680ae	263	#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) \|\| \
bogdanm	86:04dd9b1680ae	264	((PARITY) == UART_PARITY_EVEN) \|\| \
bogdanm	86:04dd9b1680ae	265	((PARITY) == UART_PARITY_ODD))
bogdanm	86:04dd9b1680ae	266	/**
bogdanm	86:04dd9b1680ae	267	* @}
bogdanm	86:04dd9b1680ae	268	*/
bogdanm	86:04dd9b1680ae	269
bogdanm	86:04dd9b1680ae	270	/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control
bogdanm	86:04dd9b1680ae	271	* @{
bogdanm	86:04dd9b1680ae	272	*/
bogdanm	86:04dd9b1680ae	273	#define UART_HWCONTROL_NONE ((uint32_t)0x0000)
bogdanm	86:04dd9b1680ae	274	#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE)
bogdanm	86:04dd9b1680ae	275	#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE)
bogdanm	86:04dd9b1680ae	276	#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE \| USART_CR3_CTSE))
bogdanm	86:04dd9b1680ae	277	#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\
bogdanm	86:04dd9b1680ae	278	(((CONTROL) == UART_HWCONTROL_NONE) \|\| \
bogdanm	86:04dd9b1680ae	279	((CONTROL) == UART_HWCONTROL_RTS) \|\| \
bogdanm	86:04dd9b1680ae	280	((CONTROL) == UART_HWCONTROL_CTS) \|\| \
bogdanm	86:04dd9b1680ae	281	((CONTROL) == UART_HWCONTROL_RTS_CTS))
bogdanm	86:04dd9b1680ae	282	/**
bogdanm	86:04dd9b1680ae	283	* @}
bogdanm	86:04dd9b1680ae	284	*/
bogdanm	86:04dd9b1680ae	285
bogdanm	86:04dd9b1680ae	286	/** @defgroup UART_Mode UART Transfer Mode
bogdanm	86:04dd9b1680ae	287	* @{
bogdanm	86:04dd9b1680ae	288	*/
bogdanm	86:04dd9b1680ae	289	#define UART_MODE_RX ((uint32_t)USART_CR1_RE)
bogdanm	86:04dd9b1680ae	290	#define UART_MODE_TX ((uint32_t)USART_CR1_TE)
bogdanm	86:04dd9b1680ae	291	#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE \|USART_CR1_RE))
bogdanm	86:04dd9b1680ae	292	#define IS_UART_MODE(MODE) ((((MODE) & (~((uint32_t)(UART_MODE_TX_RX)))) == (uint32_t)0x00) && ((MODE) != (uint32_t)0x00))
bogdanm	86:04dd9b1680ae	293	/**
bogdanm	86:04dd9b1680ae	294	* @}
bogdanm	86:04dd9b1680ae	295	*/
bogdanm	86:04dd9b1680ae	296
bogdanm	86:04dd9b1680ae	297	/** @defgroup UART_State UART State
bogdanm	86:04dd9b1680ae	298	* @{
bogdanm	86:04dd9b1680ae	299	*/
bogdanm	86:04dd9b1680ae	300	#define UART_STATE_DISABLE ((uint32_t)0x0000)
bogdanm	86:04dd9b1680ae	301	#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE)
bogdanm	86:04dd9b1680ae	302	#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) \|\| \
bogdanm	86:04dd9b1680ae	303	((STATE) == UART_STATE_ENABLE))
bogdanm	86:04dd9b1680ae	304	/**
bogdanm	86:04dd9b1680ae	305	* @}
bogdanm	86:04dd9b1680ae	306	*/
bogdanm	86:04dd9b1680ae	307
bogdanm	86:04dd9b1680ae	308	/** @defgroup UART_Over_Sampling UART Over Sampling
bogdanm	86:04dd9b1680ae	309	* @{
bogdanm	86:04dd9b1680ae	310	*/
bogdanm	86:04dd9b1680ae	311	#define UART_OVERSAMPLING_16 ((uint32_t)0x0000)
bogdanm	86:04dd9b1680ae	312	#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8)
bogdanm	86:04dd9b1680ae	313	#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) \|\| \
bogdanm	86:04dd9b1680ae	314	((SAMPLING) == UART_OVERSAMPLING_8))
bogdanm	86:04dd9b1680ae	315	/**
bogdanm	86:04dd9b1680ae	316	* @}
bogdanm	86:04dd9b1680ae	317	*/
bogdanm	86:04dd9b1680ae	318
bogdanm	86:04dd9b1680ae	319	/** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method
bogdanm	86:04dd9b1680ae	320	* @{
bogdanm	86:04dd9b1680ae	321	*/
bogdanm	86:04dd9b1680ae	322	#define UART_ONEBIT_SAMPLING_DISABLED ((uint32_t)0x0000)
bogdanm	86:04dd9b1680ae	323	#define UART_ONEBIT_SAMPLING_ENABLED ((uint32_t)USART_CR3_ONEBIT)
bogdanm	86:04dd9b1680ae	324	#define IS_UART_ONEBIT_SAMPLING(ONEBIT) (((ONEBIT) == UART_ONEBIT_SAMPLING_DISABLED) \|\| \
bogdanm	86:04dd9b1680ae	325	((ONEBIT) == UART_ONEBIT_SAMPLING_ENABLED))
bogdanm	86:04dd9b1680ae	326	/**
bogdanm	86:04dd9b1680ae	327	* @}
bogdanm	86:04dd9b1680ae	328	*/
bogdanm	86:04dd9b1680ae	329
bogdanm	86:04dd9b1680ae	330	/** @defgroup UART_AutoBaud_Rate_Mode UART Advanced Feature AutoBaud Rate Mode
bogdanm	86:04dd9b1680ae	331	* @{
bogdanm	86:04dd9b1680ae	332	*/
bogdanm	86:04dd9b1680ae	333	#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000)
bogdanm	86:04dd9b1680ae	334	#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
bogdanm	86:04dd9b1680ae	335	#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1)
bogdanm	86:04dd9b1680ae	336	#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME ((uint32_t)USART_CR2_ABRMODE)
bogdanm	86:04dd9b1680ae	337	#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) \|\| \
bogdanm	86:04dd9b1680ae	338	((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) \|\| \
bogdanm	86:04dd9b1680ae	339	((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) \|\| \
bogdanm	86:04dd9b1680ae	340	((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME))
bogdanm	86:04dd9b1680ae	341	/**
bogdanm	86:04dd9b1680ae	342	* @}
bogdanm	86:04dd9b1680ae	343	*/
bogdanm	86:04dd9b1680ae	344
bogdanm	86:04dd9b1680ae	345	/** @defgroup UART_Receiver_TimeOut UART Receiver TimeOut
bogdanm	86:04dd9b1680ae	346	* @{
bogdanm	86:04dd9b1680ae	347	*/
bogdanm	86:04dd9b1680ae	348	#define UART_RECEIVER_TIMEOUT_DISABLE ((uint32_t)0x00000000)
bogdanm	86:04dd9b1680ae	349	#define UART_RECEIVER_TIMEOUT_ENABLE ((uint32_t)USART_CR2_RTOEN)
bogdanm	86:04dd9b1680ae	350	#define IS_UART_RECEIVER_TIMEOUT(TIMEOUT) (((TIMEOUT) == UART_RECEIVER_TIMEOUT_DISABLE) \|\| \
bogdanm	86:04dd9b1680ae	351	((TIMEOUT) == UART_RECEIVER_TIMEOUT_ENABLE))
bogdanm	86:04dd9b1680ae	352	/**
bogdanm	86:04dd9b1680ae	353	* @}
bogdanm	86:04dd9b1680ae	354	*/
bogdanm	86:04dd9b1680ae	355
bogdanm	86:04dd9b1680ae	356	/** @defgroup UART_LIN UART Local Interconnection Network mode
bogdanm	86:04dd9b1680ae	357	* @{
bogdanm	86:04dd9b1680ae	358	*/
bogdanm	86:04dd9b1680ae	359	#define UART_LIN_DISABLE ((uint32_t)0x00000000)
bogdanm	86:04dd9b1680ae	360	#define UART_LIN_ENABLE ((uint32_t)USART_CR2_LINEN)
bogdanm	86:04dd9b1680ae	361	#define IS_UART_LIN(LIN) (((LIN) == UART_LIN_DISABLE) \|\| \
bogdanm	86:04dd9b1680ae	362	((LIN) == UART_LIN_ENABLE))
bogdanm	86:04dd9b1680ae	363	/**
bogdanm	86:04dd9b1680ae	364	* @}
bogdanm	86:04dd9b1680ae	365	*/
bogdanm	86:04dd9b1680ae	366
bogdanm	86:04dd9b1680ae	367	/** @defgroup UART_LIN_Break_Detection UART LIN Break Detection
bogdanm	86:04dd9b1680ae	368	* @{
bogdanm	86:04dd9b1680ae	369	*/
bogdanm	86:04dd9b1680ae	370	#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000)
bogdanm	86:04dd9b1680ae	371	#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL)
bogdanm	86:04dd9b1680ae	372	#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) \|\| \
bogdanm	86:04dd9b1680ae	373	((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
bogdanm	86:04dd9b1680ae	374	/**
bogdanm	86:04dd9b1680ae	375	* @}
bogdanm	86:04dd9b1680ae	376	*/
bogdanm	86:04dd9b1680ae	377
bogdanm	86:04dd9b1680ae	378
bogdanm	86:04dd9b1680ae	379
bogdanm	86:04dd9b1680ae	380	/** @defgroup UART_One_Bit UART One Bit sampling
bogdanm	86:04dd9b1680ae	381	* @{
bogdanm	86:04dd9b1680ae	382	*/
bogdanm	86:04dd9b1680ae	383	#define UART_ONE_BIT_SAMPLE_DISABLED ((uint32_t)0x00000000)
bogdanm	86:04dd9b1680ae	384	#define UART_ONE_BIT_SAMPLE_ENABLED ((uint32_t)USART_CR3_ONEBIT)
bogdanm	86:04dd9b1680ae	385	#define IS_UART_ONEBIT_SAMPLE(ONEBIT) (((ONEBIT) == UART_ONE_BIT_SAMPLE_DISABLED) \|\| \
bogdanm	86:04dd9b1680ae	386	((ONEBIT) == UART_ONE_BIT_SAMPLE_ENABLED))
bogdanm	86:04dd9b1680ae	387	/**
bogdanm	86:04dd9b1680ae	388	* @}
bogdanm	86:04dd9b1680ae	389	*/
bogdanm	86:04dd9b1680ae	390
bogdanm	86:04dd9b1680ae	391	/** @defgroup UART_DMA_Tx UART DMA Tx
bogdanm	86:04dd9b1680ae	392	* @{
bogdanm	86:04dd9b1680ae	393	*/
bogdanm	86:04dd9b1680ae	394	#define UART_DMA_TX_DISABLE ((uint32_t)0x00000000)
bogdanm	86:04dd9b1680ae	395	#define UART_DMA_TX_ENABLE ((uint32_t)USART_CR3_DMAT)
bogdanm	86:04dd9b1680ae	396	#define IS_UART_DMA_TX(DMATX) (((DMATX) == UART_DMA_TX_DISABLE) \|\| \
bogdanm	86:04dd9b1680ae	397	((DMATX) == UART_DMA_TX_ENABLE))
bogdanm	86:04dd9b1680ae	398	/**
bogdanm	86:04dd9b1680ae	399	* @}
bogdanm	86:04dd9b1680ae	400	*/
bogdanm	86:04dd9b1680ae	401
bogdanm	86:04dd9b1680ae	402	/** @defgroup UART_DMA_Rx UART DMA Rx
bogdanm	86:04dd9b1680ae	403	* @{
bogdanm	86:04dd9b1680ae	404	*/
bogdanm	86:04dd9b1680ae	405	#define UART_DMA_RX_DISABLE ((uint32_t)0x0000)
bogdanm	86:04dd9b1680ae	406	#define UART_DMA_RX_ENABLE ((uint32_t)USART_CR3_DMAR)
bogdanm	86:04dd9b1680ae	407	#define IS_UART_DMA_RX(DMARX) (((DMARX) == UART_DMA_RX_DISABLE) \|\| \
bogdanm	86:04dd9b1680ae	408	((DMARX) == UART_DMA_RX_ENABLE))
bogdanm	86:04dd9b1680ae	409	/**
bogdanm	86:04dd9b1680ae	410	* @}
bogdanm	86:04dd9b1680ae	411	*/
bogdanm	86:04dd9b1680ae	412
bogdanm	86:04dd9b1680ae	413	/** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection
bogdanm	86:04dd9b1680ae	414	* @{
bogdanm	86:04dd9b1680ae	415	*/
bogdanm	86:04dd9b1680ae	416	#define UART_HALF_DUPLEX_DISABLE ((uint32_t)0x0000)
bogdanm	86:04dd9b1680ae	417	#define UART_HALF_DUPLEX_ENABLE ((uint32_t)USART_CR3_HDSEL)
bogdanm	86:04dd9b1680ae	418	#define IS_UART_HALF_DUPLEX(HDSEL) (((HDSEL) == UART_HALF_DUPLEX_DISABLE) \|\| \
bogdanm	86:04dd9b1680ae	419	((HDSEL) == UART_HALF_DUPLEX_ENABLE))
bogdanm	86:04dd9b1680ae	420	/**
bogdanm	86:04dd9b1680ae	421	* @}
bogdanm	86:04dd9b1680ae	422	*/
bogdanm	86:04dd9b1680ae	423
bogdanm	86:04dd9b1680ae	424	/** @defgroup UART_WakeUp_Methods UART WakeUp Methods
bogdanm	86:04dd9b1680ae	425	* @{
bogdanm	86:04dd9b1680ae	426	*/
bogdanm	86:04dd9b1680ae	427	#define UART_WAKEUPMETHOD_IDLELINE ((uint32_t)0x00000000)
bogdanm	86:04dd9b1680ae	428	#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)USART_CR1_WAKE)
bogdanm	86:04dd9b1680ae	429	#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) \|\| \
bogdanm	86:04dd9b1680ae	430	((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK))
bogdanm	86:04dd9b1680ae	431	/**
bogdanm	86:04dd9b1680ae	432	* @}
bogdanm	86:04dd9b1680ae	433	*/
bogdanm	86:04dd9b1680ae	434
bogdanm	86:04dd9b1680ae	435	/** @defgroup UART_Flags UART Status Flags
bogdanm	86:04dd9b1680ae	436	* Elements values convention: 0xXXXX
bogdanm	86:04dd9b1680ae	437	* - 0xXXXX : Flag mask in the ISR register
bogdanm	86:04dd9b1680ae	438	* @{
bogdanm	86:04dd9b1680ae	439	*/
bogdanm	86:04dd9b1680ae	440	#define UART_FLAG_REACK ((uint32_t)0x00400000)
bogdanm	86:04dd9b1680ae	441	#define UART_FLAG_TEACK ((uint32_t)0x00200000)
bogdanm	86:04dd9b1680ae	442	#define UART_FLAG_WUF ((uint32_t)0x00100000)
bogdanm	86:04dd9b1680ae	443	#define UART_FLAG_RWU ((uint32_t)0x00080000)
bogdanm	86:04dd9b1680ae	444	#define UART_FLAG_SBKF ((uint32_t)0x00040000
bogdanm	86:04dd9b1680ae	445	#define UART_FLAG_CMF ((uint32_t)0x00020000)
bogdanm	86:04dd9b1680ae	446	#define UART_FLAG_BUSY ((uint32_t)0x00010000)
bogdanm	86:04dd9b1680ae	447	#define UART_FLAG_ABRF ((uint32_t)0x00008000)
bogdanm	86:04dd9b1680ae	448	#define UART_FLAG_ABRE ((uint32_t)0x00004000)
bogdanm	86:04dd9b1680ae	449	#define UART_FLAG_EOBF ((uint32_t)0x00001000)
bogdanm	86:04dd9b1680ae	450	#define UART_FLAG_RTOF ((uint32_t)0x00000800)
bogdanm	86:04dd9b1680ae	451	#define UART_FLAG_CTS ((uint32_t)0x00000400)
bogdanm	86:04dd9b1680ae	452	#define UART_FLAG_CTSIF ((uint32_t)0x00000200)
bogdanm	86:04dd9b1680ae	453	#define UART_FLAG_LBDF ((uint32_t)0x00000100)
bogdanm	86:04dd9b1680ae	454	#define UART_FLAG_TXE ((uint32_t)0x00000080)
bogdanm	86:04dd9b1680ae	455	#define UART_FLAG_TC ((uint32_t)0x00000040)
bogdanm	86:04dd9b1680ae	456	#define UART_FLAG_RXNE ((uint32_t)0x00000020)
bogdanm	86:04dd9b1680ae	457	#define UART_FLAG_IDLE ((uint32_t)0x00000010)
bogdanm	86:04dd9b1680ae	458	#define UART_FLAG_ORE ((uint32_t)0x00000008)
bogdanm	86:04dd9b1680ae	459	#define UART_FLAG_NE ((uint32_t)0x00000004)
bogdanm	86:04dd9b1680ae	460	#define UART_FLAG_FE ((uint32_t)0x00000002)
bogdanm	86:04dd9b1680ae	461	#define UART_FLAG_PE ((uint32_t)0x00000001)
bogdanm	86:04dd9b1680ae	462	/**
bogdanm	86:04dd9b1680ae	463	* @}
bogdanm	86:04dd9b1680ae	464	*/
bogdanm	86:04dd9b1680ae	465
bogdanm	86:04dd9b1680ae	466	/** @defgroup UART_Interrupt_definition UART Interrupts Definition
bogdanm	86:04dd9b1680ae	467	* Elements values convention: 0000ZZZZ0XXYYYYYb
bogdanm	86:04dd9b1680ae	468	* - YYYYY : Interrupt source position in the XX register (5bits)
bogdanm	86:04dd9b1680ae	469	* - XX : Interrupt source register (2bits)
bogdanm	86:04dd9b1680ae	470	* - 01: CR1 register
bogdanm	86:04dd9b1680ae	471	* - 10: CR2 register
bogdanm	86:04dd9b1680ae	472	* - 11: CR3 register
bogdanm	86:04dd9b1680ae	473	* - ZZZZ : Flag position in the ISR register(4bits)
bogdanm	86:04dd9b1680ae	474	* @{
bogdanm	86:04dd9b1680ae	475	*/
bogdanm	86:04dd9b1680ae	476	#define UART_IT_PE ((uint16_t)0x0028)
bogdanm	86:04dd9b1680ae	477	#define UART_IT_TXE ((uint16_t)0x0727)
bogdanm	86:04dd9b1680ae	478	#define UART_IT_TC ((uint16_t)0x0626)
bogdanm	86:04dd9b1680ae	479	#define UART_IT_RXNE ((uint16_t)0x0525)
bogdanm	86:04dd9b1680ae	480	#define UART_IT_IDLE ((uint16_t)0x0424)
bogdanm	86:04dd9b1680ae	481	#define UART_IT_LBD ((uint16_t)0x0846)
bogdanm	86:04dd9b1680ae	482	#define UART_IT_CTS ((uint16_t)0x096A)
bogdanm	86:04dd9b1680ae	483	#define UART_IT_CM ((uint16_t)0x142E)
bogdanm	86:04dd9b1680ae	484	#define UART_IT_WUF ((uint16_t)0x1476)
bogdanm	86:04dd9b1680ae	485
bogdanm	86:04dd9b1680ae	486	/** Elements values convention: 000000000XXYYYYYb
bogdanm	86:04dd9b1680ae	487	* - YYYYY : Interrupt source position in the XX register (5bits)
bogdanm	86:04dd9b1680ae	488	* - XX : Interrupt source register (2bits)
bogdanm	86:04dd9b1680ae	489	* - 01: CR1 register
bogdanm	86:04dd9b1680ae	490	* - 10: CR2 register
bogdanm	86:04dd9b1680ae	491	* - 11: CR3 register
bogdanm	86:04dd9b1680ae	492	*/
bogdanm	86:04dd9b1680ae	493	#define UART_IT_ERR ((uint16_t)0x0060)
bogdanm	86:04dd9b1680ae	494
bogdanm	86:04dd9b1680ae	495	/** Elements values convention: 0000ZZZZ00000000b
bogdanm	86:04dd9b1680ae	496	* - ZZZZ : Flag position in the ISR register(4bits)
bogdanm	86:04dd9b1680ae	497	*/
bogdanm	86:04dd9b1680ae	498	#define UART_IT_ORE ((uint16_t)0x0300)
bogdanm	86:04dd9b1680ae	499	#define UART_IT_NE ((uint16_t)0x0200)
bogdanm	86:04dd9b1680ae	500	#define UART_IT_FE ((uint16_t)0x0100)
bogdanm	86:04dd9b1680ae	501	/**
bogdanm	86:04dd9b1680ae	502	* @}
bogdanm	86:04dd9b1680ae	503	*/
bogdanm	86:04dd9b1680ae	504
bogdanm	86:04dd9b1680ae	505	/** @defgroup UART_IT_CLEAR_Flags UART Interruption Clear Flags
bogdanm	86:04dd9b1680ae	506	* @{
bogdanm	86:04dd9b1680ae	507	*/
bogdanm	86:04dd9b1680ae	508	#define UART_CLEAR_PEF USART_ICR_PECF /!< Parity Error Clear Flag /
bogdanm	86:04dd9b1680ae	509	#define UART_CLEAR_FEF USART_ICR_FECF /!< Framing Error Clear Flag /
bogdanm	86:04dd9b1680ae	510	#define UART_CLEAR_NEF USART_ICR_NCF /!< Noise detected Clear Flag /
bogdanm	86:04dd9b1680ae	511	#define UART_CLEAR_OREF USART_ICR_ORECF /!< OverRun Error Clear Flag /
bogdanm	86:04dd9b1680ae	512	#define UART_CLEAR_IDLEF USART_ICR_IDLECF /!< IDLE line detected Clear Flag /
bogdanm	86:04dd9b1680ae	513	#define UART_CLEAR_TCF USART_ICR_TCCF /!< Transmission Complete Clear Flag /
bogdanm	86:04dd9b1680ae	514	#define UART_CLEAR_LBDF USART_ICR_LBDCF /!< LIN Break Detection Clear Flag /
bogdanm	86:04dd9b1680ae	515	#define UART_CLEAR_CTSF USART_ICR_CTSCF /!< CTS Interrupt Clear Flag /
bogdanm	86:04dd9b1680ae	516	#define UART_CLEAR_RTOF USART_ICR_RTOCF /!< Receiver Time Out Clear Flag /
bogdanm	86:04dd9b1680ae	517	#define UART_CLEAR_EOBF USART_ICR_EOBCF /!< End Of Block Clear Flag /
bogdanm	86:04dd9b1680ae	518	#define UART_CLEAR_CMF USART_ICR_CMCF /!< Character Match Clear Flag /
bogdanm	86:04dd9b1680ae	519	#define UART_CLEAR_WUF USART_ICR_WUCF /!< Wake Up from stop mode Clear Flag /
bogdanm	86:04dd9b1680ae	520	/**
bogdanm	86:04dd9b1680ae	521	* @}
bogdanm	86:04dd9b1680ae	522	*/
bogdanm	86:04dd9b1680ae	523
bogdanm	86:04dd9b1680ae	524	/** @defgroup UART_Request_Parameters UART Request Parameters
bogdanm	86:04dd9b1680ae	525	* @{
bogdanm	86:04dd9b1680ae	526	*/
bogdanm	86:04dd9b1680ae	527	#define UART_AUTOBAUD_REQUEST ((uint32_t)USART_RQR_ABRRQ) /!< Auto-Baud Rate Request /
bogdanm	86:04dd9b1680ae	528	#define UART_SENDBREAK_REQUEST ((uint32_t)USART_RQR_SBKRQ) /!< Send Break Request /
bogdanm	86:04dd9b1680ae	529	#define UART_MUTE_MODE_REQUEST ((uint32_t)USART_RQR_MMRQ) /!< Mute Mode Request /
bogdanm	86:04dd9b1680ae	530	#define UART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /!< Receive Data flush Request /
bogdanm	86:04dd9b1680ae	531	#define UART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /!< Transmit data flush Request /
bogdanm	86:04dd9b1680ae	532	#define IS_UART_REQUEST_PARAMETER(PARAM) (((PARAM) == UART_AUTOBAUD_REQUEST) \|\| \
bogdanm	86:04dd9b1680ae	533	((PARAM) == UART_SENDBREAK_REQUEST) \|\| \
bogdanm	86:04dd9b1680ae	534	((PARAM) == UART_MUTE_MODE_REQUEST) \|\| \
bogdanm	86:04dd9b1680ae	535	((PARAM) == UART_RXDATA_FLUSH_REQUEST) \|\| \
bogdanm	86:04dd9b1680ae	536	((PARAM) == UART_TXDATA_FLUSH_REQUEST))
bogdanm	86:04dd9b1680ae	537	/**
bogdanm	86:04dd9b1680ae	538	* @}
bogdanm	86:04dd9b1680ae	539	*/
bogdanm	86:04dd9b1680ae	540
bogdanm	86:04dd9b1680ae	541	/** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type
bogdanm	86:04dd9b1680ae	542	* @{
bogdanm	86:04dd9b1680ae	543	*/
bogdanm	86:04dd9b1680ae	544	#define UART_ADVFEATURE_NO_INIT ((uint32_t)0x00000000)
bogdanm	86:04dd9b1680ae	545	#define UART_ADVFEATURE_TXINVERT_INIT ((uint32_t)0x00000001)
bogdanm	86:04dd9b1680ae	546	#define UART_ADVFEATURE_RXINVERT_INIT ((uint32_t)0x00000002)
bogdanm	86:04dd9b1680ae	547	#define UART_ADVFEATURE_DATAINVERT_INIT ((uint32_t)0x00000004)
bogdanm	86:04dd9b1680ae	548	#define UART_ADVFEATURE_SWAP_INIT ((uint32_t)0x00000008)
bogdanm	86:04dd9b1680ae	549	#define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT ((uint32_t)0x00000010)
bogdanm	86:04dd9b1680ae	550	#define UART_ADVFEATURE_DMADISABLEONERROR_INIT ((uint32_t)0x00000020)
bogdanm	86:04dd9b1680ae	551	#define UART_ADVFEATURE_AUTOBAUDRATE_INIT ((uint32_t)0x00000040)
bogdanm	86:04dd9b1680ae	552	#define UART_ADVFEATURE_MSBFIRST_INIT ((uint32_t)0x00000080)
bogdanm	86:04dd9b1680ae	553	#define IS_UART_ADVFEATURE_INIT(INIT) ((INIT) <= (UART_ADVFEATURE_NO_INIT \| \
bogdanm	86:04dd9b1680ae	554	UART_ADVFEATURE_TXINVERT_INIT \| \
bogdanm	86:04dd9b1680ae	555	UART_ADVFEATURE_RXINVERT_INIT \| \
bogdanm	86:04dd9b1680ae	556	UART_ADVFEATURE_DATAINVERT_INIT \| \
bogdanm	86:04dd9b1680ae	557	UART_ADVFEATURE_SWAP_INIT \| \
bogdanm	86:04dd9b1680ae	558	UART_ADVFEATURE_RXOVERRUNDISABLE_INIT \| \
bogdanm	86:04dd9b1680ae	559	UART_ADVFEATURE_DMADISABLEONERROR_INIT \| \
bogdanm	86:04dd9b1680ae	560	UART_ADVFEATURE_AUTOBAUDRATE_INIT \| \
bogdanm	86:04dd9b1680ae	561	UART_ADVFEATURE_MSBFIRST_INIT))
bogdanm	86:04dd9b1680ae	562	/**
bogdanm	86:04dd9b1680ae	563	* @}
bogdanm	86:04dd9b1680ae	564	*/
bogdanm	86:04dd9b1680ae	565
bogdanm	86:04dd9b1680ae	566	/** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion
bogdanm	86:04dd9b1680ae	567	* @{
bogdanm	86:04dd9b1680ae	568	*/
bogdanm	86:04dd9b1680ae	569	#define UART_ADVFEATURE_TXINV_DISABLE ((uint32_t)0x00000000)
bogdanm	86:04dd9b1680ae	570	#define UART_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV)
bogdanm	86:04dd9b1680ae	571	#define IS_UART_ADVFEATURE_TXINV(TXINV) (((TXINV) == UART_ADVFEATURE_TXINV_DISABLE) \|\| \
bogdanm	86:04dd9b1680ae	572	((TXINV) == UART_ADVFEATURE_TXINV_ENABLE))
bogdanm	86:04dd9b1680ae	573	/**
bogdanm	86:04dd9b1680ae	574	* @}
bogdanm	86:04dd9b1680ae	575	*/
bogdanm	86:04dd9b1680ae	576
bogdanm	86:04dd9b1680ae	577	/** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion
bogdanm	86:04dd9b1680ae	578	* @{
bogdanm	86:04dd9b1680ae	579	*/
bogdanm	86:04dd9b1680ae	580	#define UART_ADVFEATURE_RXINV_DISABLE ((uint32_t)0x00000000)
bogdanm	86:04dd9b1680ae	581	#define UART_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV)
bogdanm	86:04dd9b1680ae	582	#define IS_UART_ADVFEATURE_RXINV(RXINV) (((RXINV) == UART_ADVFEATURE_RXINV_DISABLE) \|\| \
bogdanm	86:04dd9b1680ae	583	((RXINV) == UART_ADVFEATURE_RXINV_ENABLE))
bogdanm	86:04dd9b1680ae	584	/**
bogdanm	86:04dd9b1680ae	585	* @}
bogdanm	86:04dd9b1680ae	586	*/
bogdanm	86:04dd9b1680ae	587
bogdanm	86:04dd9b1680ae	588	/** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion
bogdanm	86:04dd9b1680ae	589	* @{
bogdanm	86:04dd9b1680ae	590	*/
bogdanm	86:04dd9b1680ae	591	#define UART_ADVFEATURE_DATAINV_DISABLE ((uint32_t)0x00000000)
bogdanm	86:04dd9b1680ae	592	#define UART_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV)
bogdanm	86:04dd9b1680ae	593	#define IS_UART_ADVFEATURE_DATAINV(DATAINV) (((DATAINV) == UART_ADVFEATURE_DATAINV_DISABLE) \|\| \
bogdanm	86:04dd9b1680ae	594	((DATAINV) == UART_ADVFEATURE_DATAINV_ENABLE))
bogdanm	86:04dd9b1680ae	595	/**
bogdanm	86:04dd9b1680ae	596	* @}
bogdanm	86:04dd9b1680ae	597	*/
bogdanm	86:04dd9b1680ae	598
bogdanm	86:04dd9b1680ae	599	/** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap
bogdanm	86:04dd9b1680ae	600	* @{
bogdanm	86:04dd9b1680ae	601	*/
bogdanm	86:04dd9b1680ae	602	#define UART_ADVFEATURE_SWAP_DISABLE ((uint32_t)0x00000000)
bogdanm	86:04dd9b1680ae	603	#define UART_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP)
bogdanm	86:04dd9b1680ae	604	#define IS_UART_ADVFEATURE_SWAP(SWAP) (((SWAP) == UART_ADVFEATURE_SWAP_DISABLE) \|\| \
bogdanm	86:04dd9b1680ae	605	((SWAP) == UART_ADVFEATURE_SWAP_ENABLE))
bogdanm	86:04dd9b1680ae	606	/**
bogdanm	86:04dd9b1680ae	607	* @}
bogdanm	86:04dd9b1680ae	608	*/
bogdanm	86:04dd9b1680ae	609
bogdanm	86:04dd9b1680ae	610	/** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable
bogdanm	86:04dd9b1680ae	611	* @{
bogdanm	86:04dd9b1680ae	612	*/
bogdanm	86:04dd9b1680ae	613	#define UART_ADVFEATURE_OVERRUN_ENABLE ((uint32_t)0x00000000)
bogdanm	86:04dd9b1680ae	614	#define UART_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS)
bogdanm	86:04dd9b1680ae	615	#define IS_UART_OVERRUN(OVERRUN) (((OVERRUN) == UART_ADVFEATURE_OVERRUN_ENABLE) \|\| \
bogdanm	86:04dd9b1680ae	616	((OVERRUN) == UART_ADVFEATURE_OVERRUN_DISABLE))
bogdanm	86:04dd9b1680ae	617	/**
bogdanm	86:04dd9b1680ae	618	* @}
bogdanm	86:04dd9b1680ae	619	*/
bogdanm	86:04dd9b1680ae	620
bogdanm	86:04dd9b1680ae	621	/** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable
bogdanm	86:04dd9b1680ae	622	* @{
bogdanm	86:04dd9b1680ae	623	*/
bogdanm	86:04dd9b1680ae	624	#define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE ((uint32_t)0x00000000)
bogdanm	86:04dd9b1680ae	625	#define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE ((uint32_t)USART_CR2_ABREN)
bogdanm	86:04dd9b1680ae	626	#define IS_UART_ADVFEATURE_AUTOBAUDRATE(AUTOBAUDRATE) (((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) \|\| \
bogdanm	86:04dd9b1680ae	627	((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE))
bogdanm	86:04dd9b1680ae	628	/**
bogdanm	86:04dd9b1680ae	629	* @}
bogdanm	86:04dd9b1680ae	630	*/
bogdanm	86:04dd9b1680ae	631
bogdanm	86:04dd9b1680ae	632	/** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error
bogdanm	86:04dd9b1680ae	633	* @{
bogdanm	86:04dd9b1680ae	634	*/
bogdanm	86:04dd9b1680ae	635	#define UART_ADVFEATURE_DMA_ENABLEONRXERROR ((uint32_t)0x00000000)
bogdanm	86:04dd9b1680ae	636	#define UART_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE)
bogdanm	86:04dd9b1680ae	637	#define IS_UART_ADVFEATURE_DMAONRXERROR(DMA) (((DMA) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) \|\| \
bogdanm	86:04dd9b1680ae	638	((DMA) == UART_ADVFEATURE_DMA_DISABLEONRXERROR))
bogdanm	86:04dd9b1680ae	639	/**
bogdanm	86:04dd9b1680ae	640	* @}
bogdanm	86:04dd9b1680ae	641	*/
bogdanm	86:04dd9b1680ae	642
bogdanm	86:04dd9b1680ae	643	/** @defgroup UART_MSB_First UART Advanced Feature MSB First
bogdanm	86:04dd9b1680ae	644	* @{
bogdanm	86:04dd9b1680ae	645	*/
bogdanm	86:04dd9b1680ae	646	#define UART_ADVFEATURE_MSBFIRST_DISABLE ((uint32_t)0x00000000)
bogdanm	86:04dd9b1680ae	647	#define UART_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST)
bogdanm	86:04dd9b1680ae	648	#define IS_UART_ADVFEATURE_MSBFIRST(MSBFIRST) (((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_DISABLE) \|\| \
bogdanm	86:04dd9b1680ae	649	((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_ENABLE))
bogdanm	86:04dd9b1680ae	650	/**
bogdanm	86:04dd9b1680ae	651	* @}
bogdanm	86:04dd9b1680ae	652	*/
bogdanm	86:04dd9b1680ae	653
bogdanm	86:04dd9b1680ae	654	/** @defgroup UART_Stop_Mode_Enable UART Advanced Feature Stop Mode Enable
bogdanm	86:04dd9b1680ae	655	* @{
bogdanm	86:04dd9b1680ae	656	*/
bogdanm	86:04dd9b1680ae	657	#define UART_ADVFEATURE_STOPMODE_DISABLE ((uint32_t)0x00000000)
bogdanm	86:04dd9b1680ae	658	#define UART_ADVFEATURE_STOPMODE_ENABLE ((uint32_t)USART_CR1_UESM)
bogdanm	86:04dd9b1680ae	659	#define IS_UART_ADVFEATURE_STOPMODE(STOPMODE) (((STOPMODE) == UART_ADVFEATURE_STOPMODE_DISABLE) \|\| \
bogdanm	86:04dd9b1680ae	660	((STOPMODE) == UART_ADVFEATURE_STOPMODE_ENABLE))
bogdanm	86:04dd9b1680ae	661	/**
bogdanm	86:04dd9b1680ae	662	* @}
bogdanm	86:04dd9b1680ae	663	*/
bogdanm	86:04dd9b1680ae	664
bogdanm	86:04dd9b1680ae	665	/** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable
bogdanm	86:04dd9b1680ae	666	* @{
bogdanm	86:04dd9b1680ae	667	*/
bogdanm	86:04dd9b1680ae	668	#define UART_ADVFEATURE_MUTEMODE_DISABLE ((uint32_t)0x00000000)
bogdanm	86:04dd9b1680ae	669	#define UART_ADVFEATURE_MUTEMODE_ENABLE ((uint32_t)USART_CR1_MME)
bogdanm	86:04dd9b1680ae	670	#define IS_UART_MUTE_MODE(MUTE) (((MUTE) == UART_ADVFEATURE_MUTEMODE_DISABLE) \|\| \
bogdanm	86:04dd9b1680ae	671	((MUTE) == UART_ADVFEATURE_MUTEMODE_ENABLE))
bogdanm	86:04dd9b1680ae	672	/**
bogdanm	86:04dd9b1680ae	673	* @}
bogdanm	86:04dd9b1680ae	674	*/
bogdanm	86:04dd9b1680ae	675
bogdanm	86:04dd9b1680ae	676	/** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register
bogdanm	86:04dd9b1680ae	677	* @{
bogdanm	86:04dd9b1680ae	678	*/
bogdanm	86:04dd9b1680ae	679	#define UART_CR2_ADDRESS_LSB_POS ((uint32_t) 24)
bogdanm	86:04dd9b1680ae	680	/**
bogdanm	86:04dd9b1680ae	681	* @}
bogdanm	86:04dd9b1680ae	682	*/
bogdanm	86:04dd9b1680ae	683
bogdanm	86:04dd9b1680ae	684	/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection
bogdanm	86:04dd9b1680ae	685	* @{
bogdanm	86:04dd9b1680ae	686	*/
bogdanm	86:04dd9b1680ae	687	#define UART_WAKEUP_ON_ADDRESS ((uint32_t)0x0000)
bogdanm	86:04dd9b1680ae	688	#define UART_WAKEUP_ON_STARTBIT ((uint32_t)USART_CR3_WUS_1)
bogdanm	86:04dd9b1680ae	689	#define UART_WAKEUP_ON_READDATA_NONEMPTY ((uint32_t)USART_CR3_WUS)
bogdanm	86:04dd9b1680ae	690	#define IS_UART_WAKEUP_SELECTION(WAKE) (((WAKE) == UART_WAKEUP_ON_ADDRESS) \|\| \
bogdanm	86:04dd9b1680ae	691	((WAKE) == UART_WAKEUP_ON_STARTBIT) \|\| \
bogdanm	86:04dd9b1680ae	692	((WAKE) == UART_WAKEUP_ON_READDATA_NONEMPTY))
bogdanm	86:04dd9b1680ae	693	/**
bogdanm	86:04dd9b1680ae	694	* @}
bogdanm	86:04dd9b1680ae	695	*/
bogdanm	86:04dd9b1680ae	696
bogdanm	86:04dd9b1680ae	697	/** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity
bogdanm	86:04dd9b1680ae	698	* @{
bogdanm	86:04dd9b1680ae	699	*/
bogdanm	86:04dd9b1680ae	700	#define UART_DE_POLARITY_HIGH ((uint32_t)0x00000000)
bogdanm	86:04dd9b1680ae	701	#define UART_DE_POLARITY_LOW ((uint32_t)USART_CR3_DEP)
bogdanm	86:04dd9b1680ae	702	#define IS_UART_DE_POLARITY(POLARITY) (((POLARITY) == UART_DE_POLARITY_HIGH) \|\| \
bogdanm	86:04dd9b1680ae	703	((POLARITY) == UART_DE_POLARITY_LOW))
bogdanm	86:04dd9b1680ae	704	/**
bogdanm	86:04dd9b1680ae	705	* @}
bogdanm	86:04dd9b1680ae	706	*/
bogdanm	86:04dd9b1680ae	707
bogdanm	86:04dd9b1680ae	708	/** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register
bogdanm	86:04dd9b1680ae	709	* @{
bogdanm	86:04dd9b1680ae	710	*/
bogdanm	86:04dd9b1680ae	711	#define UART_CR1_DEAT_ADDRESS_LSB_POS ((uint32_t) 21)
bogdanm	86:04dd9b1680ae	712	/**
bogdanm	86:04dd9b1680ae	713	* @}
bogdanm	86:04dd9b1680ae	714	*/
bogdanm	86:04dd9b1680ae	715
bogdanm	86:04dd9b1680ae	716	/** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register
bogdanm	86:04dd9b1680ae	717	* @{
bogdanm	86:04dd9b1680ae	718	*/
bogdanm	86:04dd9b1680ae	719	#define UART_CR1_DEDT_ADDRESS_LSB_POS ((uint32_t) 16)
bogdanm	86:04dd9b1680ae	720	/**
bogdanm	86:04dd9b1680ae	721	* @}
bogdanm	86:04dd9b1680ae	722	*/
bogdanm	86:04dd9b1680ae	723
bogdanm	86:04dd9b1680ae	724	/** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask
bogdanm	86:04dd9b1680ae	725	* @{
bogdanm	86:04dd9b1680ae	726	*/
bogdanm	86:04dd9b1680ae	727	#define UART_IT_MASK ((uint32_t)0x001F)
bogdanm	86:04dd9b1680ae	728	/**
bogdanm	86:04dd9b1680ae	729	* @}
bogdanm	86:04dd9b1680ae	730	*/
bogdanm	86:04dd9b1680ae	731
bogdanm	86:04dd9b1680ae	732	/** @defgroup UART_TimeOut_Value UART polling-based communications time-out value
bogdanm	86:04dd9b1680ae	733	* @{
bogdanm	86:04dd9b1680ae	734	*/
bogdanm	86:04dd9b1680ae	735	#define HAL_UART_TIMEOUT_VALUE 0x1FFFFFF
bogdanm	86:04dd9b1680ae	736	/**
bogdanm	86:04dd9b1680ae	737	* @}
bogdanm	86:04dd9b1680ae	738	*/
bogdanm	86:04dd9b1680ae	739
bogdanm	86:04dd9b1680ae	740	/**
bogdanm	86:04dd9b1680ae	741	* @}
bogdanm	86:04dd9b1680ae	742	*/
bogdanm	86:04dd9b1680ae	743
bogdanm	86:04dd9b1680ae	744	/* Exported macros -----------------------------------------------------------*/
bogdanm	92:4fc01daae5a5	745	/** @defgroup UART_Exported_Macros UART Exported Macros
bogdanm	86:04dd9b1680ae	746	* @{
bogdanm	86:04dd9b1680ae	747	*/
bogdanm	86:04dd9b1680ae	748
bogdanm	86:04dd9b1680ae	749	/** @brief Reset UART handle state
bogdanm	86:04dd9b1680ae	750	* @param __HANDLE__: UART handle.
bogdanm	86:04dd9b1680ae	751	* @retval None
bogdanm	86:04dd9b1680ae	752	*/
bogdanm	86:04dd9b1680ae	753	#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET)
bogdanm	86:04dd9b1680ae	754
bogdanm	86:04dd9b1680ae	755	/** @brief Checks whether the specified UART flag is set or not.
bogdanm	86:04dd9b1680ae	756	* @param __HANDLE__: specifies the UART Handle.
bogdanm	86:04dd9b1680ae	757	* This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
bogdanm	86:04dd9b1680ae	758	* UART peripheral (datasheet: up to five USART/UARTs)
bogdanm	86:04dd9b1680ae	759	* @param __FLAG__: specifies the flag to check.
bogdanm	86:04dd9b1680ae	760	* This parameter can be one of the following values:
bogdanm	86:04dd9b1680ae	761	* @arg UART_FLAG_REACK: Receive enable ackowledge flag
bogdanm	86:04dd9b1680ae	762	* @arg UART_FLAG_TEACK: Transmit enable ackowledge flag
bogdanm	86:04dd9b1680ae	763	* @arg UART_FLAG_WUF: Wake up from stop mode flag
bogdanm	86:04dd9b1680ae	764	* @arg UART_FLAG_RWU: Receiver wake up flag (is the UART in mute mode)
bogdanm	86:04dd9b1680ae	765	* @arg UART_FLAG_SBKF: Send Break flag
bogdanm	86:04dd9b1680ae	766	* @arg UART_FLAG_CMF: Character match flag
bogdanm	86:04dd9b1680ae	767	* @arg UART_FLAG_BUSY: Busy flag
bogdanm	86:04dd9b1680ae	768	* @arg UART_FLAG_ABRF: Auto Baud rate detection flag
bogdanm	86:04dd9b1680ae	769	* @arg UART_FLAG_ABRE: Auto Baud rate detection error flag
bogdanm	86:04dd9b1680ae	770	* @arg UART_FLAG_EOBF: End of block flag
bogdanm	86:04dd9b1680ae	771	* @arg UART_FLAG_RTOF: Receiver timeout flag
bogdanm	86:04dd9b1680ae	772	* @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5)
bogdanm	86:04dd9b1680ae	773	* @arg UART_FLAG_LBD: LIN Break detection flag
bogdanm	86:04dd9b1680ae	774	* @arg UART_FLAG_TXE: Transmit data register empty flag
bogdanm	86:04dd9b1680ae	775	* @arg UART_FLAG_TC: Transmission Complete flag
bogdanm	86:04dd9b1680ae	776	* @arg UART_FLAG_RXNE: Receive data register not empty flag
bogdanm	86:04dd9b1680ae	777	* @arg UART_FLAG_IDLE: Idle Line detection flag
bogdanm	86:04dd9b1680ae	778	* @arg UART_FLAG_ORE: OverRun Error flag
bogdanm	86:04dd9b1680ae	779	* @arg UART_FLAG_NE: Noise Error flag
bogdanm	86:04dd9b1680ae	780	* @arg UART_FLAG_FE: Framing Error flag
bogdanm	86:04dd9b1680ae	781	* @arg UART_FLAG_PE: Parity Error flag
bogdanm	86:04dd9b1680ae	782	* @retval The new state of __FLAG__ (TRUE or FALSE).
bogdanm	86:04dd9b1680ae	783	*/
bogdanm	86:04dd9b1680ae	784	#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__))
bogdanm	86:04dd9b1680ae	785
bogdanm	86:04dd9b1680ae	786	/** @brief Enables the specified UART interrupt.
bogdanm	86:04dd9b1680ae	787	* @param __HANDLE__: specifies the UART Handle.
bogdanm	86:04dd9b1680ae	788	* This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
bogdanm	86:04dd9b1680ae	789	* UART peripheral. (datasheet: up to five USART/UARTs)
bogdanm	86:04dd9b1680ae	790	* @param __INTERRUPT__: specifies the UART interrupt source to enable.
bogdanm	86:04dd9b1680ae	791	* This parameter can be one of the following values:
bogdanm	86:04dd9b1680ae	792	* @arg UART_IT_WUF: Wakeup from stop mode interrupt
bogdanm	86:04dd9b1680ae	793	* @arg UART_IT_CM: Character match interrupt
bogdanm	86:04dd9b1680ae	794	* @arg UART_IT_CTS: CTS change interrupt
bogdanm	86:04dd9b1680ae	795	* @arg UART_IT_LBD: LIN Break detection interrupt
bogdanm	86:04dd9b1680ae	796	* @arg UART_IT_TXE: Transmit Data Register empty interrupt
bogdanm	86:04dd9b1680ae	797	* @arg UART_IT_TC: Transmission complete interrupt
bogdanm	86:04dd9b1680ae	798	* @arg UART_IT_RXNE: Receive Data register not empty interrupt
bogdanm	86:04dd9b1680ae	799	* @arg UART_IT_IDLE: Idle line detection interrupt
bogdanm	86:04dd9b1680ae	800	* @arg UART_IT_PE: Parity Error interrupt
bogdanm	86:04dd9b1680ae	801	* @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
bogdanm	86:04dd9b1680ae	802	* @retval None
bogdanm	86:04dd9b1680ae	803	*/
bogdanm	86:04dd9b1680ae	804	#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 \|= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
bogdanm	86:04dd9b1680ae	805	((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 \|= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
bogdanm	86:04dd9b1680ae	806	((__HANDLE__)->Instance->CR3 \|= (1U << ((__INTERRUPT__) & UART_IT_MASK))))
bogdanm	86:04dd9b1680ae	807
bogdanm	86:04dd9b1680ae	808
bogdanm	86:04dd9b1680ae	809	/** @brief Disables the specified UART interrupt.
bogdanm	86:04dd9b1680ae	810	* @param __HANDLE__: specifies the UART Handle.
bogdanm	86:04dd9b1680ae	811	* This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
bogdanm	86:04dd9b1680ae	812	* UART peripheral. (datasheet: up to five USART/UARTs)
bogdanm	86:04dd9b1680ae	813	* @param __INTERRUPT__: specifies the UART interrupt source to disable.
bogdanm	86:04dd9b1680ae	814	* This parameter can be one of the following values:
bogdanm	86:04dd9b1680ae	815	* @arg UART_IT_WUF: Wakeup from stop mode interrupt
bogdanm	86:04dd9b1680ae	816	* @arg UART_IT_CM: Character match interrupt
bogdanm	86:04dd9b1680ae	817	* @arg UART_IT_CTS: CTS change interrupt
bogdanm	86:04dd9b1680ae	818	* @arg UART_IT_LBD: LIN Break detection interrupt
bogdanm	86:04dd9b1680ae	819	* @arg UART_IT_TXE: Transmit Data Register empty interrupt
bogdanm	86:04dd9b1680ae	820	* @arg UART_IT_TC: Transmission complete interrupt
bogdanm	86:04dd9b1680ae	821	* @arg UART_IT_RXNE: Receive Data register not empty interrupt
bogdanm	86:04dd9b1680ae	822	* @arg UART_IT_IDLE: Idle line detection interrupt
bogdanm	86:04dd9b1680ae	823	* @arg UART_IT_PE: Parity Error interrupt
bogdanm	86:04dd9b1680ae	824	* @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error)
bogdanm	86:04dd9b1680ae	825	* @retval None
bogdanm	86:04dd9b1680ae	826	*/
bogdanm	86:04dd9b1680ae	827	#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
bogdanm	86:04dd9b1680ae	828	((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \
bogdanm	86:04dd9b1680ae	829	((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))))
bogdanm	86:04dd9b1680ae	830
bogdanm	86:04dd9b1680ae	831	/** @brief Checks whether the specified UART interrupt has occurred or not.
bogdanm	86:04dd9b1680ae	832	* @param __HANDLE__: specifies the UART Handle.
bogdanm	86:04dd9b1680ae	833	* This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
bogdanm	86:04dd9b1680ae	834	* UART peripheral. (datasheet: up to five USART/UARTs)
bogdanm	86:04dd9b1680ae	835	* @param __IT__: specifies the UART interrupt to check.
bogdanm	86:04dd9b1680ae	836	* This parameter can be one of the following values:
bogdanm	86:04dd9b1680ae	837	* @arg UART_IT_WUF: Wakeup from stop mode interrupt
bogdanm	86:04dd9b1680ae	838	* @arg UART_IT_CM: Character match interrupt
bogdanm	86:04dd9b1680ae	839	* @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
bogdanm	86:04dd9b1680ae	840	* @arg UART_IT_LBD: LIN Break detection interrupt
bogdanm	86:04dd9b1680ae	841	* @arg UART_IT_TXE: Transmit Data Register empty interrupt
bogdanm	86:04dd9b1680ae	842	* @arg UART_IT_TC: Transmission complete interrupt
bogdanm	86:04dd9b1680ae	843	* @arg UART_IT_RXNE: Receive Data register not empty interrupt
bogdanm	86:04dd9b1680ae	844	* @arg UART_IT_IDLE: Idle line detection interrupt
bogdanm	86:04dd9b1680ae	845	* @arg UART_IT_ORE: OverRun Error interrupt
bogdanm	86:04dd9b1680ae	846	* @arg UART_IT_NE: Noise Error interrupt
bogdanm	86:04dd9b1680ae	847	* @arg UART_IT_FE: Framing Error interrupt
bogdanm	86:04dd9b1680ae	848	* @arg UART_IT_PE: Parity Error interrupt
bogdanm	86:04dd9b1680ae	849	* @retval The new state of __IT__ (TRUE or FALSE).
bogdanm	86:04dd9b1680ae	850	*/
bogdanm	86:04dd9b1680ae	851	#define __HAL_UART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08)))
bogdanm	86:04dd9b1680ae	852
bogdanm	86:04dd9b1680ae	853	/** @brief Checks whether the specified UART interrupt source is enabled.
bogdanm	86:04dd9b1680ae	854	* @param __HANDLE__: specifies the UART Handle.
bogdanm	86:04dd9b1680ae	855	* This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
bogdanm	86:04dd9b1680ae	856	* UART peripheral. (datasheet: up to five USART/UARTs)
bogdanm	86:04dd9b1680ae	857	* @param __IT__: specifies the UART interrupt source to check.
bogdanm	86:04dd9b1680ae	858	* This parameter can be one of the following values:
bogdanm	86:04dd9b1680ae	859	* @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5)
bogdanm	86:04dd9b1680ae	860	* @arg UART_IT_LBD: LIN Break detection interrupt
bogdanm	86:04dd9b1680ae	861	* @arg UART_IT_TXE: Transmit Data Register empty interrupt
bogdanm	86:04dd9b1680ae	862	* @arg UART_IT_TC: Transmission complete interrupt
bogdanm	86:04dd9b1680ae	863	* @arg UART_IT_RXNE: Receive Data register not empty interrupt
bogdanm	86:04dd9b1680ae	864	* @arg UART_IT_IDLE: Idle line detection interrupt
bogdanm	86:04dd9b1680ae	865	* @arg UART_IT_ORE: OverRun Error interrupt
bogdanm	86:04dd9b1680ae	866	* @arg UART_IT_NE: Noise Error interrupt
bogdanm	86:04dd9b1680ae	867	* @arg UART_IT_FE: Framing Error interrupt
bogdanm	86:04dd9b1680ae	868	* @arg UART_IT_PE: Parity Error interrupt
bogdanm	86:04dd9b1680ae	869	* @retval The new state of __IT__ (TRUE or FALSE).
bogdanm	86:04dd9b1680ae	870	*/
bogdanm	86:04dd9b1680ae	871	#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5U) == 2)? \
bogdanm	86:04dd9b1680ae	872	(__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & UART_IT_MASK)))
bogdanm	86:04dd9b1680ae	873
bogdanm	86:04dd9b1680ae	874	/** @brief Clears the specified UART ISR flag, in setting the proper ICR register flag.
bogdanm	86:04dd9b1680ae	875	* @param __HANDLE__: specifies the UART Handle.
bogdanm	86:04dd9b1680ae	876	* This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
bogdanm	86:04dd9b1680ae	877	* UART peripheral. (datasheet: up to five USART/UARTs)
bogdanm	86:04dd9b1680ae	878	* @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set
bogdanm	86:04dd9b1680ae	879	* to clear the corresponding interrupt
bogdanm	86:04dd9b1680ae	880	* This parameter can be one of the following values:
bogdanm	86:04dd9b1680ae	881	* @arg UART_CLEAR_PEF: Parity Error Clear Flag
bogdanm	86:04dd9b1680ae	882	* @arg UART_CLEAR_FEF: Framing Error Clear Flag
bogdanm	86:04dd9b1680ae	883	* @arg UART_CLEAR_NEF: Noise detected Clear Flag
bogdanm	86:04dd9b1680ae	884	* @arg UART_CLEAR_OREF: OverRun Error Clear Flag
bogdanm	86:04dd9b1680ae	885	* @arg UART_CLEAR_IDLEF: IDLE line detected Clear Flag
bogdanm	86:04dd9b1680ae	886	* @arg UART_CLEAR_TCF: Transmission Complete Clear Flag
bogdanm	86:04dd9b1680ae	887	* @arg UART_CLEAR_LBDF: LIN Break Detection Clear Flag
bogdanm	86:04dd9b1680ae	888	* @arg UART_CLEAR_CTSF: CTS Interrupt Clear Flag
bogdanm	86:04dd9b1680ae	889	* @arg UART_CLEAR_RTOF: Receiver Time Out Clear Flag
bogdanm	86:04dd9b1680ae	890	* @arg UART_CLEAR_EOBF: End Of Block Clear Flag
bogdanm	86:04dd9b1680ae	891	* @arg UART_CLEAR_CMF: Character Match Clear Flag
bogdanm	86:04dd9b1680ae	892	* @arg UART_CLEAR_WUF: Wake Up from stop mode Clear Flag
bogdanm	86:04dd9b1680ae	893	* @retval None
bogdanm	86:04dd9b1680ae	894	*/
bogdanm	86:04dd9b1680ae	895	#define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__))
bogdanm	86:04dd9b1680ae	896
bogdanm	86:04dd9b1680ae	897	/** @brief Set a specific UART request flag.
bogdanm	86:04dd9b1680ae	898	* @param __HANDLE__: specifies the UART Handle.
bogdanm	86:04dd9b1680ae	899	* This parameter can be UARTx where x: 1, 2, 3, 4, 5 to select the USART or
bogdanm	86:04dd9b1680ae	900	* UART peripheral. (datasheet: up to five USART/UARTs)
bogdanm	86:04dd9b1680ae	901	* @param __REQ__: specifies the request flag to set
bogdanm	86:04dd9b1680ae	902	* This parameter can be one of the following values:
bogdanm	86:04dd9b1680ae	903	* @arg UART_AUTOBAUD_REQUEST: Auto-Baud Rate Request
bogdanm	86:04dd9b1680ae	904	* @arg UART_SENDBREAK_REQUEST: Send Break Request
bogdanm	86:04dd9b1680ae	905	* @arg UART_MUTE_MODE_REQUEST: Mute Mode Request
bogdanm	86:04dd9b1680ae	906	* @arg UART_RXDATA_FLUSH_REQUEST: Receive Data flush Request
bogdanm	86:04dd9b1680ae	907	* @arg UART_TXDATA_FLUSH_REQUEST: Transmit data flush Request
bogdanm	86:04dd9b1680ae	908	* @retval None
bogdanm	86:04dd9b1680ae	909	*/
bogdanm	86:04dd9b1680ae	910	#define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR \|= (uint32_t)(__REQ__))
bogdanm	86:04dd9b1680ae	911
bogdanm	86:04dd9b1680ae	912	/** @brief Enable UART
bogdanm	86:04dd9b1680ae	913	* @param __HANDLE__: specifies the UART Handle.
bogdanm	86:04dd9b1680ae	914	* The Handle Instance can be UARTx where x: 1, 2, 3, 4 or 5 to select the UART peripheral
bogdanm	86:04dd9b1680ae	915	* @retval None
bogdanm	86:04dd9b1680ae	916	*/
bogdanm	86:04dd9b1680ae	917	#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 \|= USART_CR1_UE)
bogdanm	86:04dd9b1680ae	918
bogdanm	86:04dd9b1680ae	919	/** @brief Disable UART
bogdanm	86:04dd9b1680ae	920	* @param __HANDLE__: specifies the UART Handle.
bogdanm	86:04dd9b1680ae	921	* The Handle Instance can be UARTx where x: 1, 2, 3, 4 or 5 to select the UART peripheral
bogdanm	86:04dd9b1680ae	922	* @retval None
bogdanm	86:04dd9b1680ae	923	*/
bogdanm	86:04dd9b1680ae	924	#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE)
bogdanm	86:04dd9b1680ae	925
bogdanm	86:04dd9b1680ae	926	/** @brief BRR division operation to set BRR register in 8-bit oversampling mode
bogdanm	86:04dd9b1680ae	927	* @param _PCLK_: UART clock
bogdanm	86:04dd9b1680ae	928	* @param _BAUD_: Baud rate set by the user
bogdanm	86:04dd9b1680ae	929	* @retval Division result
bogdanm	86:04dd9b1680ae	930	*/
bogdanm	86:04dd9b1680ae	931	#define __DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*2)/((_BAUD_)))
bogdanm	86:04dd9b1680ae	932
bogdanm	86:04dd9b1680ae	933	/** @brief BRR division operation to set BRR register in 16-bit oversampling mode
bogdanm	86:04dd9b1680ae	934	* @param _PCLK_: UART clock
bogdanm	86:04dd9b1680ae	935	* @param _BAUD_: Baud rate set by the user
bogdanm	86:04dd9b1680ae	936	* @retval Division result
bogdanm	86:04dd9b1680ae	937	*/
bogdanm	86:04dd9b1680ae	938	#define __DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_))/((_BAUD_)))
bogdanm	86:04dd9b1680ae	939
bogdanm	86:04dd9b1680ae	940	/** @brief Check UART Baud rate
bogdanm	86:04dd9b1680ae	941	* @param BAUDRATE: Baudrate specified by the user
bogdanm	86:04dd9b1680ae	942	* The maximum Baud Rate is derived from the maximum clock on F3 (i.e. 72 MHz)
bogdanm	86:04dd9b1680ae	943	* divided by the smallest oversampling used on the USART (i.e. 8)
bogdanm	86:04dd9b1680ae	944	* @retval Test result (TRUE or FALSE).
bogdanm	86:04dd9b1680ae	945	*/
bogdanm	86:04dd9b1680ae	946	#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 9000001)
bogdanm	86:04dd9b1680ae	947
bogdanm	86:04dd9b1680ae	948	/** @brief Check UART assertion time
bogdanm	86:04dd9b1680ae	949	* @param TIME: 5-bit value assertion time
bogdanm	86:04dd9b1680ae	950	* @retval Test result (TRUE or FALSE).
bogdanm	86:04dd9b1680ae	951	*/
bogdanm	86:04dd9b1680ae	952	#define IS_UART_ASSERTIONTIME(TIME) ((TIME) <= 0x1F)
bogdanm	86:04dd9b1680ae	953
bogdanm	86:04dd9b1680ae	954	/** @brief Check UART deassertion time
bogdanm	86:04dd9b1680ae	955	* @param TIME: 5-bit value deassertion time
bogdanm	86:04dd9b1680ae	956	* @retval Test result (TRUE or FALSE).
bogdanm	86:04dd9b1680ae	957	*/
bogdanm	86:04dd9b1680ae	958	#define IS_UART_DEASSERTIONTIME(TIME) ((TIME) <= 0x1F)
bogdanm	86:04dd9b1680ae	959
bogdanm	86:04dd9b1680ae	960	/**
bogdanm	86:04dd9b1680ae	961	* @}
bogdanm	86:04dd9b1680ae	962	*/
bogdanm	86:04dd9b1680ae	963
bogdanm	92:4fc01daae5a5	964	/* Include UART HAL Extended module */
bogdanm	86:04dd9b1680ae	965	#include "stm32f3xx_hal_uart_ex.h"
bogdanm	86:04dd9b1680ae	966
bogdanm	86:04dd9b1680ae	967	/* Exported functions --------------------------------------------------------*/
bogdanm	92:4fc01daae5a5	968	/** @addtogroup UART_Exported_Functions UART Exported Functions
bogdanm	92:4fc01daae5a5	969	* @{
bogdanm	92:4fc01daae5a5	970	*/
bogdanm	92:4fc01daae5a5	971
bogdanm	92:4fc01daae5a5	972	/** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
bogdanm	92:4fc01daae5a5	973	* @brief Initialization and Configuration functions
bogdanm	92:4fc01daae5a5	974	* @{
bogdanm	92:4fc01daae5a5	975	*/
bogdanm	86:04dd9b1680ae	976	/* Initialization and de-initialization functions ****************************/
bogdanm	86:04dd9b1680ae	977	HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart);
bogdanm	86:04dd9b1680ae	978	HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart);
bogdanm	86:04dd9b1680ae	979	HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
bogdanm	86:04dd9b1680ae	980	HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod);
bogdanm	86:04dd9b1680ae	981	HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart);
bogdanm	86:04dd9b1680ae	982	void HAL_UART_MspInit(UART_HandleTypeDef *huart);
bogdanm	86:04dd9b1680ae	983	void HAL_UART_MspDeInit(UART_HandleTypeDef *huart);
bogdanm	92:4fc01daae5a5	984	/**
bogdanm	92:4fc01daae5a5	985	* @}
bogdanm	92:4fc01daae5a5	986	*/
bogdanm	86:04dd9b1680ae	987
bogdanm	92:4fc01daae5a5	988	/** @addtogroup UART_Exported_Functions_Group2 Input and Output operation functions
bogdanm	92:4fc01daae5a5	989	* @brief UART Transmit/Receive functions
bogdanm	92:4fc01daae5a5	990	* @{
bogdanm	92:4fc01daae5a5	991	*/
bogdanm	86:04dd9b1680ae	992	/* IO operation functions *****************************************************/
bogdanm	86:04dd9b1680ae	993	HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size, uint32_t Timeout);
bogdanm	86:04dd9b1680ae	994	HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size, uint32_t Timeout);
bogdanm	86:04dd9b1680ae	995	HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size);
bogdanm	86:04dd9b1680ae	996	HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size);
bogdanm	86:04dd9b1680ae	997	HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size);
bogdanm	86:04dd9b1680ae	998	HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef huart, uint8_t pData, uint16_t Size);
bogdanm	86:04dd9b1680ae	999	HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart);
bogdanm	86:04dd9b1680ae	1000	HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart);
bogdanm	86:04dd9b1680ae	1001	HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart);
bogdanm	86:04dd9b1680ae	1002	void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
bogdanm	86:04dd9b1680ae	1003	void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart);
bogdanm	86:04dd9b1680ae	1004	void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart);
bogdanm	86:04dd9b1680ae	1005	void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart);
bogdanm	86:04dd9b1680ae	1006	void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart);
bogdanm	86:04dd9b1680ae	1007	void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart);
bogdanm	86:04dd9b1680ae	1008	void HAL_UART_WakeupCallback(UART_HandleTypeDef *huart);
bogdanm	86:04dd9b1680ae	1009
bogdanm	92:4fc01daae5a5	1010	HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
bogdanm	92:4fc01daae5a5	1011	/**
bogdanm	92:4fc01daae5a5	1012	* @}
bogdanm	92:4fc01daae5a5	1013	*/
bogdanm	92:4fc01daae5a5	1014
bogdanm	92:4fc01daae5a5	1015	/** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions
bogdanm	92:4fc01daae5a5	1016	* @brief UART control functions
bogdanm	92:4fc01daae5a5	1017	* @{
bogdanm	92:4fc01daae5a5	1018	*/
bogdanm	86:04dd9b1680ae	1019	/* Peripheral Control functions ***********************************************/
bogdanm	92:4fc01daae5a5	1020	HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart);
bogdanm	92:4fc01daae5a5	1021	HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart);
bogdanm	92:4fc01daae5a5	1022	void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart);
bogdanm	92:4fc01daae5a5	1023	HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart);
bogdanm	92:4fc01daae5a5	1024	HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart);
bogdanm	92:4fc01daae5a5	1025	HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart);
bogdanm	86:04dd9b1680ae	1026	HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
bogdanm	86:04dd9b1680ae	1027
bogdanm	92:4fc01daae5a5	1028	HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart);
bogdanm	92:4fc01daae5a5	1029	void UART_AdvFeatureConfig(UART_HandleTypeDef *huart);
bogdanm	92:4fc01daae5a5	1030	void UART_Wakeup_AddressConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
bogdanm	92:4fc01daae5a5	1031	/**
bogdanm	92:4fc01daae5a5	1032	* @}
bogdanm	92:4fc01daae5a5	1033	*/
bogdanm	92:4fc01daae5a5	1034
bogdanm	92:4fc01daae5a5	1035	/** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Error functions
bogdanm	92:4fc01daae5a5	1036	* @brief Peripheral State and Error functions
bogdanm	92:4fc01daae5a5	1037	* @{
bogdanm	92:4fc01daae5a5	1038	*/
bogdanm	86:04dd9b1680ae	1039	/* Peripheral State and Error functions ***************************************/
bogdanm	86:04dd9b1680ae	1040	HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart);
bogdanm	86:04dd9b1680ae	1041	uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart);
bogdanm	92:4fc01daae5a5	1042	/**
bogdanm	92:4fc01daae5a5	1043	* @}
bogdanm	92:4fc01daae5a5	1044	*/
bogdanm	92:4fc01daae5a5	1045
bogdanm	92:4fc01daae5a5	1046	/**
bogdanm	92:4fc01daae5a5	1047	* @}
bogdanm	92:4fc01daae5a5	1048	*/
bogdanm	86:04dd9b1680ae	1049
bogdanm	86:04dd9b1680ae	1050	/**
bogdanm	86:04dd9b1680ae	1051	* @}
bogdanm	86:04dd9b1680ae	1052	*/
bogdanm	86:04dd9b1680ae	1053
bogdanm	86:04dd9b1680ae	1054	/**
bogdanm	86:04dd9b1680ae	1055	* @}
bogdanm	86:04dd9b1680ae	1056	*/
bogdanm	86:04dd9b1680ae	1057
bogdanm	86:04dd9b1680ae	1058	#ifdef __cplusplus
bogdanm	86:04dd9b1680ae	1059	}
bogdanm	86:04dd9b1680ae	1060	#endif
bogdanm	86:04dd9b1680ae	1061
bogdanm	86:04dd9b1680ae	1062	#endif /* __STM32F3xx_HAL_UART_H */
bogdanm	86:04dd9b1680ae	1063
bogdanm	86:04dd9b1680ae	1064	/********************** (C) COPYRIGHT STMicroelectronics *END OF FILE**/

Repository toolbox

Export to desktop IDE

Repository details

Type:	Library
Created:	08 Apr 2015
Imports:	2
Forks:	0
Commits:	98
Dependents:	1
Dependencies:	0
Followers:	1

TARGET_NUCLEO_F334R8/stm32f3xx_hal_uart.h@92:4fc01daae5a5, 2014-11-27 (annotated)

Who changed what in which revision?

Repository toolbox

Repository details

Important Information for this Arm website

Access Warning