my fork
Fork of mbed by
TARGET_NUCLEO_L152RE/stm32l1xx_hal_irda.h@97:4298809c7c9e, 2015-04-08 (annotated)
- Committer:
- filartrix
- Date:
- Wed Apr 08 14:12:53 2015 +0000
- Revision:
- 97:4298809c7c9e
- Parent:
- 90:cb3d968589d8
First reale BlueNRG module for nucleo 401 board
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
Kojto | 90:cb3d968589d8 | 1 | /** |
Kojto | 90:cb3d968589d8 | 2 | ****************************************************************************** |
Kojto | 90:cb3d968589d8 | 3 | * @file stm32l1xx_hal_irda.h |
Kojto | 90:cb3d968589d8 | 4 | * @author MCD Application Team |
Kojto | 90:cb3d968589d8 | 5 | * @version V1.0.0 |
Kojto | 90:cb3d968589d8 | 6 | * @date 5-September-2014 |
Kojto | 90:cb3d968589d8 | 7 | * @brief This file contains all the functions prototypes for the IRDA |
Kojto | 90:cb3d968589d8 | 8 | * firmware library. |
Kojto | 90:cb3d968589d8 | 9 | ****************************************************************************** |
Kojto | 90:cb3d968589d8 | 10 | * @attention |
Kojto | 90:cb3d968589d8 | 11 | * |
Kojto | 90:cb3d968589d8 | 12 | * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> |
Kojto | 90:cb3d968589d8 | 13 | * |
Kojto | 90:cb3d968589d8 | 14 | * Redistribution and use in source and binary forms, with or without modification, |
Kojto | 90:cb3d968589d8 | 15 | * are permitted provided that the following conditions are met: |
Kojto | 90:cb3d968589d8 | 16 | * 1. Redistributions of source code must retain the above copyright notice, |
Kojto | 90:cb3d968589d8 | 17 | * this list of conditions and the following disclaimer. |
Kojto | 90:cb3d968589d8 | 18 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
Kojto | 90:cb3d968589d8 | 19 | * this list of conditions and the following disclaimer in the documentation |
Kojto | 90:cb3d968589d8 | 20 | * and/or other materials provided with the distribution. |
Kojto | 90:cb3d968589d8 | 21 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
Kojto | 90:cb3d968589d8 | 22 | * may be used to endorse or promote products derived from this software |
Kojto | 90:cb3d968589d8 | 23 | * without specific prior written permission. |
Kojto | 90:cb3d968589d8 | 24 | * |
Kojto | 90:cb3d968589d8 | 25 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
Kojto | 90:cb3d968589d8 | 26 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
Kojto | 90:cb3d968589d8 | 27 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
Kojto | 90:cb3d968589d8 | 28 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
Kojto | 90:cb3d968589d8 | 29 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
Kojto | 90:cb3d968589d8 | 30 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
Kojto | 90:cb3d968589d8 | 31 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
Kojto | 90:cb3d968589d8 | 32 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
Kojto | 90:cb3d968589d8 | 33 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
Kojto | 90:cb3d968589d8 | 34 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
Kojto | 90:cb3d968589d8 | 35 | * |
Kojto | 90:cb3d968589d8 | 36 | ****************************************************************************** |
Kojto | 90:cb3d968589d8 | 37 | */ |
Kojto | 90:cb3d968589d8 | 38 | |
Kojto | 90:cb3d968589d8 | 39 | /* Define to prevent recursive inclusion -------------------------------------*/ |
Kojto | 90:cb3d968589d8 | 40 | #ifndef __STM32L1xx_HAL_IRDA_H |
Kojto | 90:cb3d968589d8 | 41 | #define __STM32L1xx_HAL_IRDA_H |
Kojto | 90:cb3d968589d8 | 42 | |
Kojto | 90:cb3d968589d8 | 43 | #ifdef __cplusplus |
Kojto | 90:cb3d968589d8 | 44 | extern "C" { |
Kojto | 90:cb3d968589d8 | 45 | #endif |
Kojto | 90:cb3d968589d8 | 46 | |
Kojto | 90:cb3d968589d8 | 47 | /* Includes ------------------------------------------------------------------*/ |
Kojto | 90:cb3d968589d8 | 48 | #include "stm32l1xx_hal_def.h" |
Kojto | 90:cb3d968589d8 | 49 | |
Kojto | 90:cb3d968589d8 | 50 | /** @addtogroup STM32L1xx_HAL_Driver |
Kojto | 90:cb3d968589d8 | 51 | * @{ |
Kojto | 90:cb3d968589d8 | 52 | */ |
Kojto | 90:cb3d968589d8 | 53 | |
Kojto | 90:cb3d968589d8 | 54 | /** @addtogroup IRDA |
Kojto | 90:cb3d968589d8 | 55 | * @{ |
Kojto | 90:cb3d968589d8 | 56 | */ |
Kojto | 90:cb3d968589d8 | 57 | |
Kojto | 90:cb3d968589d8 | 58 | /* Exported types ------------------------------------------------------------*/ |
Kojto | 90:cb3d968589d8 | 59 | /** @defgroup IRDA_Exported_Types IRDA Exported Types |
Kojto | 90:cb3d968589d8 | 60 | * @{ |
Kojto | 90:cb3d968589d8 | 61 | */ |
Kojto | 90:cb3d968589d8 | 62 | |
Kojto | 90:cb3d968589d8 | 63 | /** |
Kojto | 90:cb3d968589d8 | 64 | * @brief IRDA Init Structure definition |
Kojto | 90:cb3d968589d8 | 65 | */ |
Kojto | 90:cb3d968589d8 | 66 | typedef struct |
Kojto | 90:cb3d968589d8 | 67 | { |
Kojto | 90:cb3d968589d8 | 68 | uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate. |
Kojto | 90:cb3d968589d8 | 69 | The baud rate is computed using the following formula: |
Kojto | 90:cb3d968589d8 | 70 | - IntegerDivider = ((PCLKx) / (8 * (hirda->Init.BaudRate))) |
Kojto | 90:cb3d968589d8 | 71 | - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */ |
Kojto | 90:cb3d968589d8 | 72 | |
Kojto | 90:cb3d968589d8 | 73 | uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. |
Kojto | 90:cb3d968589d8 | 74 | This parameter can be a value of @ref IRDA_Word_Length */ |
Kojto | 90:cb3d968589d8 | 75 | |
Kojto | 90:cb3d968589d8 | 76 | |
Kojto | 90:cb3d968589d8 | 77 | uint32_t Parity; /*!< Specifies the parity mode. |
Kojto | 90:cb3d968589d8 | 78 | This parameter can be a value of @ref IRDA_Parity |
Kojto | 90:cb3d968589d8 | 79 | @note When parity is enabled, the computed parity is inserted |
Kojto | 90:cb3d968589d8 | 80 | at the MSB position of the transmitted data (9th bit when |
Kojto | 90:cb3d968589d8 | 81 | the word length is set to 9 data bits; 8th bit when the |
Kojto | 90:cb3d968589d8 | 82 | word length is set to 8 data bits). */ |
Kojto | 90:cb3d968589d8 | 83 | |
Kojto | 90:cb3d968589d8 | 84 | uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled. |
Kojto | 90:cb3d968589d8 | 85 | This parameter can be a value of @ref IRDA_Transfer_Mode */ |
Kojto | 90:cb3d968589d8 | 86 | |
Kojto | 90:cb3d968589d8 | 87 | uint8_t Prescaler; /*!< Specifies the Prescaler */ |
Kojto | 90:cb3d968589d8 | 88 | |
Kojto | 90:cb3d968589d8 | 89 | uint32_t IrDAMode; /*!< Specifies the IrDA mode |
Kojto | 90:cb3d968589d8 | 90 | This parameter can be a value of @ref IRDA_Low_Power */ |
Kojto | 90:cb3d968589d8 | 91 | }IRDA_InitTypeDef; |
Kojto | 90:cb3d968589d8 | 92 | |
Kojto | 90:cb3d968589d8 | 93 | /** |
Kojto | 90:cb3d968589d8 | 94 | * @brief HAL IRDA State structures definition |
Kojto | 90:cb3d968589d8 | 95 | */ |
Kojto | 90:cb3d968589d8 | 96 | typedef enum |
Kojto | 90:cb3d968589d8 | 97 | { |
Kojto | 90:cb3d968589d8 | 98 | HAL_IRDA_STATE_RESET = 0x00, /*!< Peripheral is not initialized */ |
Kojto | 90:cb3d968589d8 | 99 | HAL_IRDA_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ |
Kojto | 90:cb3d968589d8 | 100 | HAL_IRDA_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ |
Kojto | 90:cb3d968589d8 | 101 | HAL_IRDA_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ |
Kojto | 90:cb3d968589d8 | 102 | HAL_IRDA_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ |
Kojto | 90:cb3d968589d8 | 103 | HAL_IRDA_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */ |
Kojto | 90:cb3d968589d8 | 104 | HAL_IRDA_STATE_TIMEOUT = 0x03, /*!< Timeout state */ |
Kojto | 90:cb3d968589d8 | 105 | HAL_IRDA_STATE_ERROR = 0x04 /*!< Error */ |
Kojto | 90:cb3d968589d8 | 106 | }HAL_IRDA_StateTypeDef; |
Kojto | 90:cb3d968589d8 | 107 | |
Kojto | 90:cb3d968589d8 | 108 | /** |
Kojto | 90:cb3d968589d8 | 109 | * @brief HAL IRDA Error Code structure definition |
Kojto | 90:cb3d968589d8 | 110 | */ |
Kojto | 90:cb3d968589d8 | 111 | typedef enum |
Kojto | 90:cb3d968589d8 | 112 | { |
Kojto | 90:cb3d968589d8 | 113 | HAL_IRDA_ERROR_NONE = 0x00, /*!< No error */ |
Kojto | 90:cb3d968589d8 | 114 | HAL_IRDA_ERROR_PE = 0x01, /*!< Parity error */ |
Kojto | 90:cb3d968589d8 | 115 | HAL_IRDA_ERROR_NE = 0x02, /*!< Noise error */ |
Kojto | 90:cb3d968589d8 | 116 | HAL_IRDA_ERROR_FE = 0x04, /*!< frame error */ |
Kojto | 90:cb3d968589d8 | 117 | HAL_IRDA_ERROR_ORE = 0x08, /*!< Overrun error */ |
Kojto | 90:cb3d968589d8 | 118 | HAL_IRDA_ERROR_DMA = 0x10 /*!< DMA transfer error */ |
Kojto | 90:cb3d968589d8 | 119 | }HAL_IRDA_ErrorTypeDef; |
Kojto | 90:cb3d968589d8 | 120 | |
Kojto | 90:cb3d968589d8 | 121 | /** |
Kojto | 90:cb3d968589d8 | 122 | * @brief IRDA handle Structure definition |
Kojto | 90:cb3d968589d8 | 123 | */ |
Kojto | 90:cb3d968589d8 | 124 | typedef struct |
Kojto | 90:cb3d968589d8 | 125 | { |
Kojto | 90:cb3d968589d8 | 126 | USART_TypeDef *Instance; /* USART registers base address */ |
Kojto | 90:cb3d968589d8 | 127 | |
Kojto | 90:cb3d968589d8 | 128 | IRDA_InitTypeDef Init; /* IRDA communication parameters */ |
Kojto | 90:cb3d968589d8 | 129 | |
Kojto | 90:cb3d968589d8 | 130 | uint8_t *pTxBuffPtr; /* Pointer to IRDA Tx transfer Buffer */ |
Kojto | 90:cb3d968589d8 | 131 | |
Kojto | 90:cb3d968589d8 | 132 | uint16_t TxXferSize; /* IRDA Tx Transfer size */ |
Kojto | 90:cb3d968589d8 | 133 | |
Kojto | 90:cb3d968589d8 | 134 | uint16_t TxXferCount; /* IRDA Tx Transfer Counter */ |
Kojto | 90:cb3d968589d8 | 135 | |
Kojto | 90:cb3d968589d8 | 136 | uint8_t *pRxBuffPtr; /* Pointer to IRDA Rx transfer Buffer */ |
Kojto | 90:cb3d968589d8 | 137 | |
Kojto | 90:cb3d968589d8 | 138 | uint16_t RxXferSize; /* IRDA Rx Transfer size */ |
Kojto | 90:cb3d968589d8 | 139 | |
Kojto | 90:cb3d968589d8 | 140 | uint16_t RxXferCount; /* IRDA Rx Transfer Counter */ |
Kojto | 90:cb3d968589d8 | 141 | |
Kojto | 90:cb3d968589d8 | 142 | DMA_HandleTypeDef *hdmatx; /* IRDA Tx DMA Handle parameters */ |
Kojto | 90:cb3d968589d8 | 143 | |
Kojto | 90:cb3d968589d8 | 144 | DMA_HandleTypeDef *hdmarx; /* IRDA Rx DMA Handle parameters */ |
Kojto | 90:cb3d968589d8 | 145 | |
Kojto | 90:cb3d968589d8 | 146 | HAL_LockTypeDef Lock; /* Locking object */ |
Kojto | 90:cb3d968589d8 | 147 | |
Kojto | 90:cb3d968589d8 | 148 | __IO HAL_IRDA_StateTypeDef State; /* IRDA communication state */ |
Kojto | 90:cb3d968589d8 | 149 | |
Kojto | 90:cb3d968589d8 | 150 | __IO HAL_IRDA_ErrorTypeDef ErrorCode; /* IRDA Error code */ |
Kojto | 90:cb3d968589d8 | 151 | |
Kojto | 90:cb3d968589d8 | 152 | }IRDA_HandleTypeDef; |
Kojto | 90:cb3d968589d8 | 153 | |
Kojto | 90:cb3d968589d8 | 154 | /** |
Kojto | 90:cb3d968589d8 | 155 | * @} |
Kojto | 90:cb3d968589d8 | 156 | */ |
Kojto | 90:cb3d968589d8 | 157 | |
Kojto | 90:cb3d968589d8 | 158 | /* Exported constants --------------------------------------------------------*/ |
Kojto | 90:cb3d968589d8 | 159 | /** @defgroup IRDA_Exported_Constants IRDA Exported constants |
Kojto | 90:cb3d968589d8 | 160 | * @{ |
Kojto | 90:cb3d968589d8 | 161 | */ |
Kojto | 90:cb3d968589d8 | 162 | |
Kojto | 90:cb3d968589d8 | 163 | /** @defgroup IRDA_Word_Length IRDA Word Length |
Kojto | 90:cb3d968589d8 | 164 | * @{ |
Kojto | 90:cb3d968589d8 | 165 | */ |
Kojto | 90:cb3d968589d8 | 166 | #define IRDA_WORDLENGTH_8B ((uint32_t)0x00000000) |
Kojto | 90:cb3d968589d8 | 167 | #define IRDA_WORDLENGTH_9B ((uint32_t)USART_CR1_M) |
Kojto | 90:cb3d968589d8 | 168 | #define IS_IRDA_WORD_LENGTH(LENGTH) (((LENGTH) == IRDA_WORDLENGTH_8B) || \ |
Kojto | 90:cb3d968589d8 | 169 | ((LENGTH) == IRDA_WORDLENGTH_9B)) |
Kojto | 90:cb3d968589d8 | 170 | /** |
Kojto | 90:cb3d968589d8 | 171 | * @} |
Kojto | 90:cb3d968589d8 | 172 | */ |
Kojto | 90:cb3d968589d8 | 173 | |
Kojto | 90:cb3d968589d8 | 174 | |
Kojto | 90:cb3d968589d8 | 175 | /** @defgroup IRDA_Parity IRDA Parity |
Kojto | 90:cb3d968589d8 | 176 | * @{ |
Kojto | 90:cb3d968589d8 | 177 | */ |
Kojto | 90:cb3d968589d8 | 178 | #define IRDA_PARITY_NONE ((uint32_t)0x00000000) |
Kojto | 90:cb3d968589d8 | 179 | #define IRDA_PARITY_EVEN ((uint32_t)USART_CR1_PCE) |
Kojto | 90:cb3d968589d8 | 180 | #define IRDA_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) |
Kojto | 90:cb3d968589d8 | 181 | #define IS_IRDA_PARITY(PARITY) (((PARITY) == IRDA_PARITY_NONE) || \ |
Kojto | 90:cb3d968589d8 | 182 | ((PARITY) == IRDA_PARITY_EVEN) || \ |
Kojto | 90:cb3d968589d8 | 183 | ((PARITY) == IRDA_PARITY_ODD)) |
Kojto | 90:cb3d968589d8 | 184 | /** |
Kojto | 90:cb3d968589d8 | 185 | * @} |
Kojto | 90:cb3d968589d8 | 186 | */ |
Kojto | 90:cb3d968589d8 | 187 | |
Kojto | 90:cb3d968589d8 | 188 | |
Kojto | 90:cb3d968589d8 | 189 | /** @defgroup IRDA_Transfer_Mode IRDA Transfer Mode |
Kojto | 90:cb3d968589d8 | 190 | * @{ |
Kojto | 90:cb3d968589d8 | 191 | */ |
Kojto | 90:cb3d968589d8 | 192 | #define IRDA_MODE_RX ((uint32_t)USART_CR1_RE) |
Kojto | 90:cb3d968589d8 | 193 | #define IRDA_MODE_TX ((uint32_t)USART_CR1_TE) |
Kojto | 90:cb3d968589d8 | 194 | #define IRDA_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) |
Kojto | 90:cb3d968589d8 | 195 | #define IS_IRDA_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3) == 0x00) && ((MODE) != (uint32_t)0x000000)) |
Kojto | 90:cb3d968589d8 | 196 | /** |
Kojto | 90:cb3d968589d8 | 197 | * @} |
Kojto | 90:cb3d968589d8 | 198 | */ |
Kojto | 90:cb3d968589d8 | 199 | |
Kojto | 90:cb3d968589d8 | 200 | /** @defgroup IRDA_Low_Power IRDA Low Power |
Kojto | 90:cb3d968589d8 | 201 | * @{ |
Kojto | 90:cb3d968589d8 | 202 | */ |
Kojto | 90:cb3d968589d8 | 203 | #define IRDA_POWERMODE_LOWPOWER ((uint32_t)USART_CR3_IRLP) |
Kojto | 90:cb3d968589d8 | 204 | #define IRDA_POWERMODE_NORMAL ((uint32_t)0x00000000) |
Kojto | 90:cb3d968589d8 | 205 | #define IS_IRDA_POWERMODE(MODE) (((MODE) == IRDA_POWERMODE_LOWPOWER) || \ |
Kojto | 90:cb3d968589d8 | 206 | ((MODE) == IRDA_POWERMODE_NORMAL)) |
Kojto | 90:cb3d968589d8 | 207 | /** |
Kojto | 90:cb3d968589d8 | 208 | * @} |
Kojto | 90:cb3d968589d8 | 209 | */ |
Kojto | 90:cb3d968589d8 | 210 | |
Kojto | 90:cb3d968589d8 | 211 | /** @defgroup IRDA_Flags IRDA Flags |
Kojto | 90:cb3d968589d8 | 212 | * Elements values convention: 0xXXXX |
Kojto | 90:cb3d968589d8 | 213 | * - 0xXXXX : Flag mask in the SR register |
Kojto | 90:cb3d968589d8 | 214 | * @{ |
Kojto | 90:cb3d968589d8 | 215 | */ |
Kojto | 90:cb3d968589d8 | 216 | #define IRDA_FLAG_TXE ((uint32_t)USART_SR_TXE) |
Kojto | 90:cb3d968589d8 | 217 | #define IRDA_FLAG_TC ((uint32_t)USART_SR_TC) |
Kojto | 90:cb3d968589d8 | 218 | #define IRDA_FLAG_RXNE ((uint32_t)USART_SR_RXNE) |
Kojto | 90:cb3d968589d8 | 219 | #define IRDA_FLAG_IDLE ((uint32_t)USART_SR_IDLE) |
Kojto | 90:cb3d968589d8 | 220 | #define IRDA_FLAG_ORE ((uint32_t)USART_SR_ORE) |
Kojto | 90:cb3d968589d8 | 221 | #define IRDA_FLAG_NE ((uint32_t)USART_SR_NE) |
Kojto | 90:cb3d968589d8 | 222 | #define IRDA_FLAG_FE ((uint32_t)USART_SR_FE) |
Kojto | 90:cb3d968589d8 | 223 | #define IRDA_FLAG_PE ((uint32_t)USART_SR_PE) |
Kojto | 90:cb3d968589d8 | 224 | /** |
Kojto | 90:cb3d968589d8 | 225 | * @} |
Kojto | 90:cb3d968589d8 | 226 | */ |
Kojto | 90:cb3d968589d8 | 227 | |
Kojto | 90:cb3d968589d8 | 228 | /** @defgroup IRDA_Interrupt_definition IRDA Interrupt Definitions |
Kojto | 90:cb3d968589d8 | 229 | * Elements values convention: 0xY000XXXX |
Kojto | 90:cb3d968589d8 | 230 | * - XXXX : Interrupt mask in the XX register |
Kojto | 90:cb3d968589d8 | 231 | * - Y : Interrupt source register (4 bits) |
Kojto | 90:cb3d968589d8 | 232 | * - 01: CR1 register |
Kojto | 90:cb3d968589d8 | 233 | * - 10: CR2 register |
Kojto | 90:cb3d968589d8 | 234 | * - 11: CR3 register |
Kojto | 90:cb3d968589d8 | 235 | * |
Kojto | 90:cb3d968589d8 | 236 | * @{ |
Kojto | 90:cb3d968589d8 | 237 | */ |
Kojto | 90:cb3d968589d8 | 238 | |
Kojto | 90:cb3d968589d8 | 239 | #define IRDA_IT_PE ((uint32_t)0x10000100) |
Kojto | 90:cb3d968589d8 | 240 | #define IRDA_IT_TXE ((uint32_t)0x10000080) |
Kojto | 90:cb3d968589d8 | 241 | #define IRDA_IT_TC ((uint32_t)0x10000040) |
Kojto | 90:cb3d968589d8 | 242 | #define IRDA_IT_RXNE ((uint32_t)0x10000020) |
Kojto | 90:cb3d968589d8 | 243 | #define IRDA_IT_IDLE ((uint32_t)0x10000010) |
Kojto | 90:cb3d968589d8 | 244 | |
Kojto | 90:cb3d968589d8 | 245 | #define IRDA_IT_LBD ((uint32_t)0x20000040) |
Kojto | 90:cb3d968589d8 | 246 | |
Kojto | 90:cb3d968589d8 | 247 | #define IRDA_IT_CTS ((uint32_t)0x30000400) |
Kojto | 90:cb3d968589d8 | 248 | #define IRDA_IT_ERR ((uint32_t)0x30000001) |
Kojto | 90:cb3d968589d8 | 249 | |
Kojto | 90:cb3d968589d8 | 250 | /** |
Kojto | 90:cb3d968589d8 | 251 | * @} |
Kojto | 90:cb3d968589d8 | 252 | */ |
Kojto | 90:cb3d968589d8 | 253 | |
Kojto | 90:cb3d968589d8 | 254 | /** @defgroup IRDA_Interruption_Mask IRDA interruptions flag mask |
Kojto | 90:cb3d968589d8 | 255 | * @{ |
Kojto | 90:cb3d968589d8 | 256 | */ |
Kojto | 90:cb3d968589d8 | 257 | #define IRDA_IT_MASK ((uint32_t)0x0000FFFF) |
Kojto | 90:cb3d968589d8 | 258 | /** |
Kojto | 90:cb3d968589d8 | 259 | * @} |
Kojto | 90:cb3d968589d8 | 260 | */ |
Kojto | 90:cb3d968589d8 | 261 | |
Kojto | 90:cb3d968589d8 | 262 | /** |
Kojto | 90:cb3d968589d8 | 263 | * @} |
Kojto | 90:cb3d968589d8 | 264 | */ |
Kojto | 90:cb3d968589d8 | 265 | |
Kojto | 90:cb3d968589d8 | 266 | /* Exported macro ------------------------------------------------------------*/ |
Kojto | 90:cb3d968589d8 | 267 | /** @defgroup IRDA_Exported_Macros IRDA Exported Macros |
Kojto | 90:cb3d968589d8 | 268 | * @{ |
Kojto | 90:cb3d968589d8 | 269 | */ |
Kojto | 90:cb3d968589d8 | 270 | |
Kojto | 90:cb3d968589d8 | 271 | /** @brief Reset IRDA handle state |
Kojto | 90:cb3d968589d8 | 272 | * @param __HANDLE__: specifies the IRDA Handle. |
Kojto | 90:cb3d968589d8 | 273 | * This parameter can be USARTx with x: 1, 2 or 3, or UARTy with y:4 or 5 to select the USART or |
Kojto | 90:cb3d968589d8 | 274 | * UART peripheral (availability depending on device for UARTy). |
Kojto | 90:cb3d968589d8 | 275 | * @retval None |
Kojto | 90:cb3d968589d8 | 276 | */ |
Kojto | 90:cb3d968589d8 | 277 | #define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IRDA_STATE_RESET) |
Kojto | 90:cb3d968589d8 | 278 | |
Kojto | 90:cb3d968589d8 | 279 | /** @brief Flushs the IRDA DR register |
Kojto | 90:cb3d968589d8 | 280 | * @param __HANDLE__: specifies the USART Handle. |
Kojto | 90:cb3d968589d8 | 281 | * This parameter can be USARTx with x: 1, 2 or 3, or UARTy with y:4 or 5 to select the USART or |
Kojto | 90:cb3d968589d8 | 282 | * UART peripheral (availability depending on device for UARTy). |
Kojto | 90:cb3d968589d8 | 283 | */ |
Kojto | 90:cb3d968589d8 | 284 | #define __HAL_IRDA_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR) |
Kojto | 90:cb3d968589d8 | 285 | |
Kojto | 90:cb3d968589d8 | 286 | /** @brief Checks whether the specified IRDA flag is set or not. |
Kojto | 90:cb3d968589d8 | 287 | * @param __HANDLE__: specifies the IRDA Handle. |
Kojto | 90:cb3d968589d8 | 288 | * This parameter can be USARTx with x: 1, 2 or 3, or UARTy with y:4 or 5 to select the USART or |
Kojto | 90:cb3d968589d8 | 289 | * UART peripheral (availability depending on device for UARTy). |
Kojto | 90:cb3d968589d8 | 290 | * @param __FLAG__: specifies the flag to check. |
Kojto | 90:cb3d968589d8 | 291 | * This parameter can be one of the following values: |
Kojto | 90:cb3d968589d8 | 292 | * @arg IRDA_FLAG_TXE: Transmit data register empty flag |
Kojto | 90:cb3d968589d8 | 293 | * @arg IRDA_FLAG_TC: Transmission Complete flag |
Kojto | 90:cb3d968589d8 | 294 | * @arg IRDA_FLAG_RXNE: Receive data register not empty flag |
Kojto | 90:cb3d968589d8 | 295 | * @arg IRDA_FLAG_IDLE: Idle Line detection flag |
Kojto | 90:cb3d968589d8 | 296 | * @arg IRDA_FLAG_ORE: OverRun Error flag |
Kojto | 90:cb3d968589d8 | 297 | * @arg IRDA_FLAG_NE: Noise Error flag |
Kojto | 90:cb3d968589d8 | 298 | * @arg IRDA_FLAG_FE: Framing Error flag |
Kojto | 90:cb3d968589d8 | 299 | * @arg IRDA_FLAG_PE: Parity Error flag |
Kojto | 90:cb3d968589d8 | 300 | * @retval The new state of __FLAG__ (TRUE or FALSE). |
Kojto | 90:cb3d968589d8 | 301 | */ |
Kojto | 90:cb3d968589d8 | 302 | #define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) |
Kojto | 90:cb3d968589d8 | 303 | |
Kojto | 90:cb3d968589d8 | 304 | /** @brief Clears the specified IRDA pending flag. |
Kojto | 90:cb3d968589d8 | 305 | * @param __HANDLE__: specifies the IRDA Handle. |
Kojto | 90:cb3d968589d8 | 306 | * This parameter can be USARTx with x: 1, 2 or 3, or UARTy with y:4 or 5 to select the USART or |
Kojto | 90:cb3d968589d8 | 307 | * UART peripheral (availability depending on device for UARTy). |
Kojto | 90:cb3d968589d8 | 308 | * @param __FLAG__: specifies the flag to check. |
Kojto | 90:cb3d968589d8 | 309 | * This parameter can be any combination of the following values: |
Kojto | 90:cb3d968589d8 | 310 | * @arg IRDA_FLAG_TC: Transmission Complete flag. |
Kojto | 90:cb3d968589d8 | 311 | * @arg IRDA_FLAG_RXNE: Receive data register not empty flag. |
Kojto | 90:cb3d968589d8 | 312 | * |
Kojto | 90:cb3d968589d8 | 313 | * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun |
Kojto | 90:cb3d968589d8 | 314 | * error) and IDLE (Idle line detected) flags are cleared by software |
Kojto | 90:cb3d968589d8 | 315 | * sequence: a read operation to USART_SR register followed by a read |
Kojto | 90:cb3d968589d8 | 316 | * operation to USART_DR register. |
Kojto | 90:cb3d968589d8 | 317 | * @note RXNE flag can be also cleared by a read to the USART_DR register. |
Kojto | 90:cb3d968589d8 | 318 | * @note TC flag can be also cleared by software sequence: a read operation to |
Kojto | 90:cb3d968589d8 | 319 | * USART_SR register followed by a write operation to USART_DR register. |
Kojto | 90:cb3d968589d8 | 320 | * @note TXE flag is cleared only by a write to the USART_DR register. |
Kojto | 90:cb3d968589d8 | 321 | * |
Kojto | 90:cb3d968589d8 | 322 | * @retval None |
Kojto | 90:cb3d968589d8 | 323 | */ |
Kojto | 90:cb3d968589d8 | 324 | #define __HAL_IRDA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) |
Kojto | 90:cb3d968589d8 | 325 | |
Kojto | 90:cb3d968589d8 | 326 | /** @brief Clear the IRDA PE pending flag. |
Kojto | 90:cb3d968589d8 | 327 | * @param __HANDLE__: specifies the IRDA Handle. |
Kojto | 90:cb3d968589d8 | 328 | * This parameter can be USARTx with x: 1, 2 or 3, or UARTy with y:4 or 5 to select the USART or |
Kojto | 90:cb3d968589d8 | 329 | * UART peripheral (availability depending on device for UARTy). |
Kojto | 90:cb3d968589d8 | 330 | * @retval None |
Kojto | 90:cb3d968589d8 | 331 | */ |
Kojto | 90:cb3d968589d8 | 332 | #define __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR;\ |
Kojto | 90:cb3d968589d8 | 333 | (__HANDLE__)->Instance->DR;}while(0) |
Kojto | 90:cb3d968589d8 | 334 | /** @brief Clear the IRDA FE pending flag. |
Kojto | 90:cb3d968589d8 | 335 | * @param __HANDLE__: specifies the IRDA Handle. |
Kojto | 90:cb3d968589d8 | 336 | * This parameter can be USARTx with x: 1, 2 or 3, or UARTy with y:4 or 5 to select the USART or |
Kojto | 90:cb3d968589d8 | 337 | * UART peripheral (availability depending on device for UARTy). |
Kojto | 90:cb3d968589d8 | 338 | * @retval None |
Kojto | 90:cb3d968589d8 | 339 | */ |
Kojto | 90:cb3d968589d8 | 340 | #define __HAL_IRDA_CLEAR_FEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) |
Kojto | 90:cb3d968589d8 | 341 | |
Kojto | 90:cb3d968589d8 | 342 | /** @brief Clear the IRDA NE pending flag. |
Kojto | 90:cb3d968589d8 | 343 | * @param __HANDLE__: specifies the IRDA Handle. |
Kojto | 90:cb3d968589d8 | 344 | * This parameter can be USARTx with x: 1, 2 or 3, or UARTy with y:4 or 5 to select the USART or |
Kojto | 90:cb3d968589d8 | 345 | * UART peripheral (availability depending on device for UARTy). |
Kojto | 90:cb3d968589d8 | 346 | * @retval None |
Kojto | 90:cb3d968589d8 | 347 | */ |
Kojto | 90:cb3d968589d8 | 348 | #define __HAL_IRDA_CLEAR_NEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) |
Kojto | 90:cb3d968589d8 | 349 | |
Kojto | 90:cb3d968589d8 | 350 | /** @brief Clear the IRDA ORE pending flag. |
Kojto | 90:cb3d968589d8 | 351 | * @param __HANDLE__: specifies the IRDA Handle. |
Kojto | 90:cb3d968589d8 | 352 | * This parameter can be USARTx with x: 1, 2 or 3, or UARTy with y:4 or 5 to select the USART or |
Kojto | 90:cb3d968589d8 | 353 | * UART peripheral (availability depending on device for UARTy). |
Kojto | 90:cb3d968589d8 | 354 | * @retval None |
Kojto | 90:cb3d968589d8 | 355 | */ |
Kojto | 90:cb3d968589d8 | 356 | #define __HAL_IRDA_CLEAR_OREFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) |
Kojto | 90:cb3d968589d8 | 357 | |
Kojto | 90:cb3d968589d8 | 358 | /** @brief Clear the IRDA IDLE pending flag. |
Kojto | 90:cb3d968589d8 | 359 | * @param __HANDLE__: specifies the IRDA Handle. |
Kojto | 90:cb3d968589d8 | 360 | * This parameter can be USARTx with x: 1, 2 or 3, or UARTy with y:4 or 5 to select the USART or |
Kojto | 90:cb3d968589d8 | 361 | * UART peripheral (availability depending on device for UARTy). |
Kojto | 90:cb3d968589d8 | 362 | * @retval None |
Kojto | 90:cb3d968589d8 | 363 | */ |
Kojto | 90:cb3d968589d8 | 364 | #define __HAL_IRDA_CLEAR_IDLEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) |
Kojto | 90:cb3d968589d8 | 365 | |
Kojto | 90:cb3d968589d8 | 366 | /** @brief Enables the specified IRDA interrupt. |
Kojto | 90:cb3d968589d8 | 367 | * @param __HANDLE__: specifies the IRDA Handle. |
Kojto | 90:cb3d968589d8 | 368 | * This parameter can be USARTx with x: 1, 2 or 3, or UARTy with y:4 or 5 to select the USART or |
Kojto | 90:cb3d968589d8 | 369 | * UART peripheral (availability depending on device for UARTy). |
Kojto | 90:cb3d968589d8 | 370 | * @param __INTERRUPT__: specifies the IRDA interrupt source to enable. |
Kojto | 90:cb3d968589d8 | 371 | * This parameter can be one of the following values: |
Kojto | 90:cb3d968589d8 | 372 | * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt |
Kojto | 90:cb3d968589d8 | 373 | * @arg IRDA_IT_TC: Transmission complete interrupt |
Kojto | 90:cb3d968589d8 | 374 | * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt |
Kojto | 90:cb3d968589d8 | 375 | * @arg IRDA_IT_IDLE: Idle line detection interrupt |
Kojto | 90:cb3d968589d8 | 376 | * @arg IRDA_IT_PE: Parity Error interrupt |
Kojto | 90:cb3d968589d8 | 377 | * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error) |
Kojto | 90:cb3d968589d8 | 378 | * @retval None |
Kojto | 90:cb3d968589d8 | 379 | */ |
Kojto | 90:cb3d968589d8 | 380 | #define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & IRDA_IT_MASK)): \ |
Kojto | 90:cb3d968589d8 | 381 | (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & IRDA_IT_MASK)): \ |
Kojto | 90:cb3d968589d8 | 382 | ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & IRDA_IT_MASK))) |
Kojto | 90:cb3d968589d8 | 383 | |
Kojto | 90:cb3d968589d8 | 384 | /** @brief Disables the specified IRDA interrupt. |
Kojto | 90:cb3d968589d8 | 385 | * @param __HANDLE__: specifies the IRDA Handle. |
Kojto | 90:cb3d968589d8 | 386 | * This parameter can be USARTx with x: 1, 2 or 3, or UARTy with y:4 or 5 to select the USART or |
Kojto | 90:cb3d968589d8 | 387 | * UART peripheral (availability depending on device for UARTy). |
Kojto | 90:cb3d968589d8 | 388 | * @param __INTERRUPT__: specifies the IRDA interrupt source to disable. |
Kojto | 90:cb3d968589d8 | 389 | * This parameter can be one of the following values: |
Kojto | 90:cb3d968589d8 | 390 | * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt |
Kojto | 90:cb3d968589d8 | 391 | * @arg IRDA_IT_TC: Transmission complete interrupt |
Kojto | 90:cb3d968589d8 | 392 | * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt |
Kojto | 90:cb3d968589d8 | 393 | * @arg IRDA_IT_IDLE: Idle line detection interrupt |
Kojto | 90:cb3d968589d8 | 394 | * @arg IRDA_IT_PE: Parity Error interrupt |
Kojto | 90:cb3d968589d8 | 395 | * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error) |
Kojto | 90:cb3d968589d8 | 396 | * @retval None |
Kojto | 90:cb3d968589d8 | 397 | */ |
Kojto | 90:cb3d968589d8 | 398 | #define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \ |
Kojto | 90:cb3d968589d8 | 399 | (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \ |
Kojto | 90:cb3d968589d8 | 400 | ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & IRDA_IT_MASK))) |
Kojto | 90:cb3d968589d8 | 401 | |
Kojto | 90:cb3d968589d8 | 402 | /** @brief Checks whether the specified IRDA interrupt has occurred or not. |
Kojto | 90:cb3d968589d8 | 403 | * @param __HANDLE__: specifies the IRDA Handle. |
Kojto | 90:cb3d968589d8 | 404 | * This parameter can be USARTx with x: 1, 2 or 3, or UARTy with y:4 or 5 to select the USART or |
Kojto | 90:cb3d968589d8 | 405 | * UART peripheral (availability depending on device for UARTy). |
Kojto | 90:cb3d968589d8 | 406 | * @param __IT__: specifies the IRDA interrupt source to check. |
Kojto | 90:cb3d968589d8 | 407 | * This parameter can be one of the following values: |
Kojto | 90:cb3d968589d8 | 408 | * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt |
Kojto | 90:cb3d968589d8 | 409 | * @arg IRDA_IT_TC: Transmission complete interrupt |
Kojto | 90:cb3d968589d8 | 410 | * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt |
Kojto | 90:cb3d968589d8 | 411 | * @arg IRDA_IT_IDLE: Idle line detection interrupt |
Kojto | 90:cb3d968589d8 | 412 | * @arg USART_IT_ERR: Error interrupt |
Kojto | 90:cb3d968589d8 | 413 | * @arg IRDA_IT_PE: Parity Error interrupt |
Kojto | 90:cb3d968589d8 | 414 | * @retval The new state of __IT__ (TRUE or FALSE). |
Kojto | 90:cb3d968589d8 | 415 | */ |
Kojto | 90:cb3d968589d8 | 416 | #define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == 2)? \ |
Kojto | 90:cb3d968589d8 | 417 | (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & IRDA_IT_MASK)) |
Kojto | 90:cb3d968589d8 | 418 | |
Kojto | 90:cb3d968589d8 | 419 | /** @brief Enable UART/USART associated to IRDA Handle |
Kojto | 90:cb3d968589d8 | 420 | * @param __HANDLE__: specifies the IRDA Handle. |
Kojto | 90:cb3d968589d8 | 421 | * This parameter can be USARTx with x: 1, 2 or 3, or UARTy with y:4 or 5 to select the USART or |
Kojto | 90:cb3d968589d8 | 422 | * UART peripheral (availability depending on device for UARTy). |
Kojto | 90:cb3d968589d8 | 423 | * @retval None |
Kojto | 90:cb3d968589d8 | 424 | */ |
Kojto | 90:cb3d968589d8 | 425 | #define __HAL_IRDA_ENABLE(__HANDLE__) (SET_BIT((__HANDLE__)->Instance->CR1, USART_CR1_UE)) |
Kojto | 90:cb3d968589d8 | 426 | |
Kojto | 90:cb3d968589d8 | 427 | /** @brief Disable UART/USART associated to IRDA Handle |
Kojto | 90:cb3d968589d8 | 428 | * @param __HANDLE__: specifies the IRDA Handle. |
Kojto | 90:cb3d968589d8 | 429 | * This parameter can be USARTx with x: 1, 2 or 3, or UARTy with y:4 or 5 to select the USART or |
Kojto | 90:cb3d968589d8 | 430 | * UART peripheral (availability depending on device for UARTy). |
Kojto | 90:cb3d968589d8 | 431 | * @retval None |
Kojto | 90:cb3d968589d8 | 432 | */ |
Kojto | 90:cb3d968589d8 | 433 | #define __HAL_IRDA_DISABLE(__HANDLE__) (CLEAR_BIT((__HANDLE__)->Instance->CR1, USART_CR1_UE)) |
Kojto | 90:cb3d968589d8 | 434 | |
Kojto | 90:cb3d968589d8 | 435 | /** |
Kojto | 90:cb3d968589d8 | 436 | * @} |
Kojto | 90:cb3d968589d8 | 437 | */ |
Kojto | 90:cb3d968589d8 | 438 | |
Kojto | 90:cb3d968589d8 | 439 | /* Private macros --------------------------------------------------------*/ |
Kojto | 90:cb3d968589d8 | 440 | /** @defgroup IRDA_Private_Macros IRDA Private Macros |
Kojto | 90:cb3d968589d8 | 441 | * @{ |
Kojto | 90:cb3d968589d8 | 442 | */ |
Kojto | 90:cb3d968589d8 | 443 | |
Kojto | 90:cb3d968589d8 | 444 | #define IRDA_DIV(__PCLK__, __BAUD__) (((__PCLK__)*25)/(4*(__BAUD__))) |
Kojto | 90:cb3d968589d8 | 445 | #define IRDA_DIVMANT(__PCLK__, __BAUD__) (IRDA_DIV((__PCLK__), (__BAUD__))/100) |
Kojto | 90:cb3d968589d8 | 446 | #define IRDA_DIVFRAQ(__PCLK__, __BAUD__) (((IRDA_DIV((__PCLK__), (__BAUD__)) - (IRDA_DIVMANT((__PCLK__), (__BAUD__)) * 100)) * 16 + 50) / 100) |
Kojto | 90:cb3d968589d8 | 447 | #define IRDA_BRR(__PCLK__, __BAUD__) ((IRDA_DIVMANT((__PCLK__), (__BAUD__)) << 4)|(IRDA_DIVFRAQ((__PCLK__), (__BAUD__)) & 0x0F)) |
Kojto | 90:cb3d968589d8 | 448 | |
Kojto | 90:cb3d968589d8 | 449 | /** @brief Ensure that IRDA Baud rate is less or equal to maximum value |
Kojto | 90:cb3d968589d8 | 450 | * @param __BAUDRATE__: specifies the IRDA Baudrate set by the user. |
Kojto | 90:cb3d968589d8 | 451 | * @retval True or False |
Kojto | 90:cb3d968589d8 | 452 | */ |
Kojto | 90:cb3d968589d8 | 453 | #define IS_IRDA_BAUDRATE(__BAUDRATE__) ((__BAUDRATE__) < 115201) |
Kojto | 90:cb3d968589d8 | 454 | |
Kojto | 90:cb3d968589d8 | 455 | /** |
Kojto | 90:cb3d968589d8 | 456 | * @} |
Kojto | 90:cb3d968589d8 | 457 | */ |
Kojto | 90:cb3d968589d8 | 458 | |
Kojto | 90:cb3d968589d8 | 459 | |
Kojto | 90:cb3d968589d8 | 460 | /* Exported functions --------------------------------------------------------*/ |
Kojto | 90:cb3d968589d8 | 461 | |
Kojto | 90:cb3d968589d8 | 462 | /** @addtogroup IRDA_Exported_Functions IRDA Exported Functions |
Kojto | 90:cb3d968589d8 | 463 | * @{ |
Kojto | 90:cb3d968589d8 | 464 | */ |
Kojto | 90:cb3d968589d8 | 465 | |
Kojto | 90:cb3d968589d8 | 466 | /** @addtogroup IRDA_Exported_Functions_Group1 IrDA Initialization and de-initialization functions |
Kojto | 90:cb3d968589d8 | 467 | * @{ |
Kojto | 90:cb3d968589d8 | 468 | */ |
Kojto | 90:cb3d968589d8 | 469 | |
Kojto | 90:cb3d968589d8 | 470 | /* Initialization and de-initialization functions ****************************/ |
Kojto | 90:cb3d968589d8 | 471 | HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda); |
Kojto | 90:cb3d968589d8 | 472 | HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda); |
Kojto | 90:cb3d968589d8 | 473 | void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda); |
Kojto | 90:cb3d968589d8 | 474 | void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda); |
Kojto | 90:cb3d968589d8 | 475 | |
Kojto | 90:cb3d968589d8 | 476 | /** |
Kojto | 90:cb3d968589d8 | 477 | * @} |
Kojto | 90:cb3d968589d8 | 478 | */ |
Kojto | 90:cb3d968589d8 | 479 | |
Kojto | 90:cb3d968589d8 | 480 | /** @addtogroup IRDA_Exported_Functions_Group2 IO operation functions |
Kojto | 90:cb3d968589d8 | 481 | * @{ |
Kojto | 90:cb3d968589d8 | 482 | */ |
Kojto | 90:cb3d968589d8 | 483 | |
Kojto | 90:cb3d968589d8 | 484 | /* IO operation functions *****************************************************/ |
Kojto | 90:cb3d968589d8 | 485 | HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); |
Kojto | 90:cb3d968589d8 | 486 | HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); |
Kojto | 90:cb3d968589d8 | 487 | HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); |
Kojto | 90:cb3d968589d8 | 488 | HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); |
Kojto | 90:cb3d968589d8 | 489 | HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); |
Kojto | 90:cb3d968589d8 | 490 | HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); |
Kojto | 90:cb3d968589d8 | 491 | HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda); |
Kojto | 90:cb3d968589d8 | 492 | HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda); |
Kojto | 90:cb3d968589d8 | 493 | HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda); |
Kojto | 90:cb3d968589d8 | 494 | void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda); |
Kojto | 90:cb3d968589d8 | 495 | void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda); |
Kojto | 90:cb3d968589d8 | 496 | void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda); |
Kojto | 90:cb3d968589d8 | 497 | void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda); |
Kojto | 90:cb3d968589d8 | 498 | void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda); |
Kojto | 90:cb3d968589d8 | 499 | void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda); |
Kojto | 90:cb3d968589d8 | 500 | |
Kojto | 90:cb3d968589d8 | 501 | /** |
Kojto | 90:cb3d968589d8 | 502 | * @} |
Kojto | 90:cb3d968589d8 | 503 | */ |
Kojto | 90:cb3d968589d8 | 504 | |
Kojto | 90:cb3d968589d8 | 505 | /** @addtogroup IRDA_Exported_Functions_Group3 Peripheral State and Errors functions |
Kojto | 90:cb3d968589d8 | 506 | * @{ |
Kojto | 90:cb3d968589d8 | 507 | */ |
Kojto | 90:cb3d968589d8 | 508 | |
Kojto | 90:cb3d968589d8 | 509 | /* Peripheral State and Error functions ***************************************/ |
Kojto | 90:cb3d968589d8 | 510 | HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda); |
Kojto | 90:cb3d968589d8 | 511 | uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda); |
Kojto | 90:cb3d968589d8 | 512 | |
Kojto | 90:cb3d968589d8 | 513 | /** |
Kojto | 90:cb3d968589d8 | 514 | * @} |
Kojto | 90:cb3d968589d8 | 515 | */ |
Kojto | 90:cb3d968589d8 | 516 | |
Kojto | 90:cb3d968589d8 | 517 | /** |
Kojto | 90:cb3d968589d8 | 518 | * @} |
Kojto | 90:cb3d968589d8 | 519 | */ |
Kojto | 90:cb3d968589d8 | 520 | |
Kojto | 90:cb3d968589d8 | 521 | /** |
Kojto | 90:cb3d968589d8 | 522 | * @} |
Kojto | 90:cb3d968589d8 | 523 | */ |
Kojto | 90:cb3d968589d8 | 524 | |
Kojto | 90:cb3d968589d8 | 525 | /** |
Kojto | 90:cb3d968589d8 | 526 | * @} |
Kojto | 90:cb3d968589d8 | 527 | */ |
Kojto | 90:cb3d968589d8 | 528 | |
Kojto | 90:cb3d968589d8 | 529 | #ifdef __cplusplus |
Kojto | 90:cb3d968589d8 | 530 | } |
Kojto | 90:cb3d968589d8 | 531 | #endif |
Kojto | 90:cb3d968589d8 | 532 | |
Kojto | 90:cb3d968589d8 | 533 | #endif /* __STM32L1xx_HAL_IRDA_H */ |
Kojto | 90:cb3d968589d8 | 534 | |
Kojto | 90:cb3d968589d8 | 535 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |