epaper
Dependents: epaper_mbed_test_copy1
Fork of EaEpaper by
EaEpaper.h
- Committer:
- dreschpe
- Date:
- 2013-11-10
- Revision:
- 2:1f3672176ca3
- Parent:
- 1:90d18805a8a4
File content as of revision 2:1f3672176ca3:
/* mbed library for 264*176 pixel 2.7 INCH E-PAPER DISPLAY from Pervasive Displays * Copyright (c) 2013 Peter Drescher - DC2PD * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. */ // 09.11.2013 initial Version #ifndef EAEPAPER_H #define EAEPAPER_H /** * Includes */ #include "mbed.h" #include "EPD.h" #include "GraphicsDisplay.h" // we have to double buffer the display #define EA_IMG_BUF_SZ (5808) // 264 x 176 / 8 = 5808 /** Draw mode * NORMAl * XOR set pixel by xor of the screen */ enum {NORMAL,XOR}; /** Bitmap */ struct Bitmap{ int xSize; int ySize; int Byte_in_Line; char* data; }; /* color definitions */ #define Black 0x0 #define White 0x1 /** Display control class, based on GraphicsDisplay and TextDisplay * * Example with pinning for KL25Z: * @code * #include "mbed.h" * #include "EaEpaper.h" * #include "Arial28x28.h" * #include "Arial12x12.h" * #include "font_big.h" * #include "graphics.h" * // the E-Paper board from embedded artists has a LM75 temp sensor to compensate the temperature effect. If it is cold the display reacts slower. * // The LM75 need a I2C -> 2 pins : sda and scl * // The display data is written via SPI -> 3 pins : mosi,miso,sck * // There are also some control signals * // The pwm pin has to be connected to a PWM enabled pin : pwm * // The other signals are connected to normal IO`s * // * EaEpaper epaper(PTD7, // PWR_CTRL * PTD6, // BORDER * PTE31, // DISCHARGE * PTA17, // RESET_DISP * PTA16, // BUSY * PTC17, // SSEL * PTD4, // PWM * PTD2,PTD3,PTD1, // MOSI,MISO,SCLK * PTE0,PTE1); // SDA,SCL * * int main() { * * epaper.cls(); // clear screen * epaper.set_font((unsigned char*) Arial28x28); // select the font * epaper.locate(5,20); // set cursor * epaper.printf("Hello Mbed"); // print text * epaper.rect(3,15,150,50,1); // draw frame * epaper.write_disp(); // update screen * * @endcode */ class EaEpaper : public GraphicsDisplay { public: /** * Constructor. */ EaEpaper(PinName p_on, PinName border, PinName discharge, PinName reset, PinName busy, PinName cs, // IO-Pins PinName pwm, // PWM Pin PinName mosi, PinName miso, PinName sck, // SPI PinName sda, PinName scl, // I2C const char* name ="E_Paper"); /** Get the width of the screen in pixel * * @param * @returns width of screen in pixel * */ virtual int width(); /** Get the height of the screen in pixel * * @returns height of screen in pixel * */ virtual int height(); /** * Clear the display */ void clear(); /** * Write image buffer to display */ void write_disp(void); /** * set or reset a single pixel * * @param x horizontal position * @param y vertical position * @param color : 0 white, 1 black */ virtual void pixel(int x, int y, int color); /** Fill the screen with white * */ virtual void cls(void); /** draw a 1 pixel line * * @param x0,y0 start point * @param x1,y1 stop point * @param color : 0 white, 1 black */ void line(int x0, int y0, int x1, int y1, int color); /** draw a rect * * @param x0,y0 top left corner * @param x1,y1 down right corner * @param color : 0 white, 1 black */ void rect(int x0, int y0, int x1, int y1, int color); /** draw a filled rect * * @param x0,y0 top left corner * @param x1,y1 down right corner * @param color : 0 white, 1 black */ void fillrect(int x0, int y0, int x1, int y1, int color); /** draw a circle * * @param x0,y0 center * @param r radius * @param color : 0 white, 1 black * */ void circle(int x0, int y0, int r, int color); /** draw a filled circle * * @param x0,y0 center * @param r radius * @param color : 0 white, 1 black * */ void fillcircle(int x0, int y0, int r, int color); /** set drawing mode * @param NORMAL : paint normal color, XOR : paint XOR of current pixels */ void setmode(int mode); /** setup cursor position * * @param x x-position (top left) * @param y y-position */ virtual void locate(int x, int y); /** calculate the max number of char in a line * * @returns max columns * depends on actual font size */ virtual int columns(); /** calculate the max number of columns * * @returns max column * depends on actual font size */ virtual int rows(); /** put a char on the screen * * @param value char to print * @returns printed char */ virtual int _putc(int value); /** paint a character on given position out of the active font to the screen buffer * * @param x x-position (top left) * @param y y-position * @param c char code */ virtual void character(int x, int y, int c); /** select the font to use * * @param f pointer to font array * * font array can created with GLCD Font Creator from http://www.mikroe.com * you have to add 4 parameter at the beginning of the font array to use: * - the number of byte / char * - the vertial size in pixel * - the horizontal size in pixel * - the number of byte per vertical line * you also have to change the array to char[] */ void set_font(unsigned char* f); /** print bitmap to buffer * * @param bm struct Bitmap in flash * @param x x start * @param y y start * */ void print_bm(Bitmap bm, int x, int y); unsigned char* font; unsigned int draw_mode; private: EPD_Class epd_; I2C i2c_; unsigned int char_x; unsigned int char_y; int32_t readTemperature(); }; #endif /* EAEPAPER_H */