frederic blanc
/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/hal/adc/fsl_adc_hal.h substitute line 894 extern } by }
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_L152RE/stm32l1xx_hal_spi.h
- Revision:
- 90:cb3d968589d8
diff -r 552587b429a1 -r cb3d968589d8 TARGET_NUCLEO_L152RE/stm32l1xx_hal_spi.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_L152RE/stm32l1xx_hal_spi.h Tue Oct 28 16:40:41 2014 +0000
@@ -0,0 +1,556 @@
+/**
+ ******************************************************************************
+ * @file stm32l1xx_hal_spi.h
+ * @author MCD Application Team
+ * @version V1.0.0
+ * @date 5-September-2014
+ * @brief Header file of SPI HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32L1xx_HAL_SPI_H
+#define __STM32L1xx_HAL_SPI_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32l1xx_hal_def.h"
+
+/** @addtogroup STM32L1xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup SPI
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/** @defgroup SPI_Exported_Types SPI Exported Types
+ * @{
+ */
+
+/**
+ * @brief SPI Configuration Structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< Specifies the SPI operating mode.
+ This parameter can be a value of @ref SPI_mode */
+
+ uint32_t Direction; /*!< Specifies the SPI Directional mode state.
+ This parameter can be a value of @ref SPI_Direction_mode */
+
+ uint32_t DataSize; /*!< Specifies the SPI data size.
+ This parameter can be a value of @ref SPI_data_size */
+
+ uint32_t CLKPolarity; /*!< Specifies the serial clock steady state.
+ This parameter can be a value of @ref SPI_Clock_Polarity */
+
+ uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture.
+ This parameter can be a value of @ref SPI_Clock_Phase */
+
+ uint32_t NSS; /*!< Specifies whether the NSS signal is managed by
+ hardware (NSS pin) or by software using the SSI bit.
+ This parameter can be a value of @ref SPI_Slave_Select_management */
+
+ uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be
+ used to configure the transmit and receive SCK clock.
+ This parameter can be a value of @ref SPI_BaudRate_Prescaler
+ @note The communication clock is derived from the master
+ clock. The slave clock does not need to be set */
+
+ uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit.
+ This parameter can be a value of @ref SPI_MSB_LSB_transmission */
+
+ uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not.
+ This parameter can be a value of @ref SPI_TI_mode */
+
+ uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not.
+ This parameter can be a value of @ref SPI_CRC_Calculation */
+
+ uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation.
+ This parameter must be a number between Min_Data = 0 and Max_Data = 65535 */
+
+}SPI_InitTypeDef;
+
+/**
+ * @brief HAL SPI State structure definition
+ */
+typedef enum
+{
+ HAL_SPI_STATE_RESET = 0x00, /*!< SPI not yet initialized or disabled */
+ HAL_SPI_STATE_READY = 0x01, /*!< SPI initialized and ready for use */
+ HAL_SPI_STATE_BUSY = 0x02, /*!< SPI process is ongoing */
+ HAL_SPI_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */
+ HAL_SPI_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */
+ HAL_SPI_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */
+ HAL_SPI_STATE_ERROR = 0x03 /*!< SPI error state */
+
+}HAL_SPI_StateTypeDef;
+
+/**
+ * @brief HAL SPI Error Code structure definition
+ */
+typedef enum
+{
+ HAL_SPI_ERROR_NONE = 0x00, /*!< No error */
+ HAL_SPI_ERROR_MODF = 0x01, /*!< MODF error */
+ HAL_SPI_ERROR_CRC = 0x02, /*!< CRC error */
+ HAL_SPI_ERROR_OVR = 0x04, /*!< OVR error */
+ HAL_SPI_ERROR_FRE = 0x08, /*!< FRE error */
+ HAL_SPI_ERROR_DMA = 0x10, /*!< DMA transfer error */
+ HAL_SPI_ERROR_FLAG = 0x20 /*!< Flag: RXNE,TXE, BSY */
+
+}HAL_SPI_ErrorTypeDef;
+
+/**
+ * @brief SPI handle Structure definition
+ */
+typedef struct __SPI_HandleTypeDef
+{
+ SPI_TypeDef *Instance; /* SPI registers base address */
+
+ SPI_InitTypeDef Init; /* SPI communication parameters */
+
+ uint8_t *pTxBuffPtr; /* Pointer to SPI Tx transfer Buffer */
+
+ uint16_t TxXferSize; /* SPI Tx transfer size */
+
+ uint16_t TxXferCount; /* SPI Tx Transfer Counter */
+
+ uint8_t *pRxBuffPtr; /* Pointer to SPI Rx transfer Buffer */
+
+ uint16_t RxXferSize; /* SPI Rx transfer size */
+
+ uint16_t RxXferCount; /* SPI Rx Transfer Counter */
+
+ DMA_HandleTypeDef *hdmatx; /* SPI Tx DMA handle parameters */
+
+ DMA_HandleTypeDef *hdmarx; /* SPI Rx DMA handle parameters */
+
+ void (*RxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Rx ISR */
+
+ void (*TxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Tx ISR */
+
+ HAL_LockTypeDef Lock; /* SPI locking object */
+
+ __IO HAL_SPI_StateTypeDef State; /* SPI communication state */
+
+ __IO HAL_SPI_ErrorTypeDef ErrorCode; /* SPI Error code */
+
+}SPI_HandleTypeDef;
+/**
+ * @}
+ */
+
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup SPI_Exported_Constants SPI Exported Constants
+ * @{
+ */
+
+/** @defgroup SPI_mode SPI mode
+ * @{
+ */
+#define SPI_MODE_SLAVE ((uint32_t)0x00000000)
+#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI)
+
+#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \
+ ((MODE) == SPI_MODE_MASTER))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Direction_mode SPI Direction mode
+ * @{
+ */
+#define SPI_DIRECTION_2LINES ((uint32_t)0x00000000)
+#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY
+#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE
+
+#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \
+ ((MODE) == SPI_DIRECTION_2LINES_RXONLY) || \
+ ((MODE) == SPI_DIRECTION_1LINE))
+
+#define IS_SPI_DIRECTION_2LINES_OR_1LINE(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \
+ ((MODE) == SPI_DIRECTION_1LINE))
+
+#define IS_SPI_DIRECTION_2LINES(MODE) ((MODE) == SPI_DIRECTION_2LINES)
+
+/**
+ * @}
+ */
+
+/** @defgroup SPI_data_size SPI data size
+ * @{
+ */
+#define SPI_DATASIZE_8BIT ((uint32_t)0x00000000)
+#define SPI_DATASIZE_16BIT SPI_CR1_DFF
+
+#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \
+ ((DATASIZE) == SPI_DATASIZE_8BIT))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Polarity SPI Clock Polarity
+ * @{
+ */
+#define SPI_POLARITY_LOW ((uint32_t)0x00000000)
+#define SPI_POLARITY_HIGH SPI_CR1_CPOL
+
+#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \
+ ((CPOL) == SPI_POLARITY_HIGH))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Clock_Phase SPI Clock Phase
+ * @{
+ */
+#define SPI_PHASE_1EDGE ((uint32_t)0x00000000)
+#define SPI_PHASE_2EDGE SPI_CR1_CPHA
+
+#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \
+ ((CPHA) == SPI_PHASE_2EDGE))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Slave_Select_management SPI Slave Select management
+ * @{
+ */
+#define SPI_NSS_SOFT SPI_CR1_SSM
+#define SPI_NSS_HARD_INPUT ((uint32_t)0x00000000)
+#define SPI_NSS_HARD_OUTPUT ((uint32_t)(SPI_CR2_SSOE << 16))
+
+#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT) || \
+ ((NSS) == SPI_NSS_HARD_INPUT) || \
+ ((NSS) == SPI_NSS_HARD_OUTPUT))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler
+ * @{
+ */
+#define SPI_BAUDRATEPRESCALER_2 ((uint32_t)0x00000000)
+#define SPI_BAUDRATEPRESCALER_4 ((uint32_t)SPI_CR1_BR_0)
+#define SPI_BAUDRATEPRESCALER_8 ((uint32_t)SPI_CR1_BR_1)
+#define SPI_BAUDRATEPRESCALER_16 ((uint32_t)SPI_CR1_BR_1 | SPI_CR1_BR_0)
+#define SPI_BAUDRATEPRESCALER_32 ((uint32_t)SPI_CR1_BR_2)
+#define SPI_BAUDRATEPRESCALER_64 ((uint32_t)SPI_CR1_BR_2 | SPI_CR1_BR_0)
+#define SPI_BAUDRATEPRESCALER_128 ((uint32_t)SPI_CR1_BR_2 | SPI_CR1_BR_1)
+#define SPI_BAUDRATEPRESCALER_256 ((uint32_t)SPI_CR1_BR_2 | SPI_CR1_BR_1 | SPI_CR1_BR_0)
+
+#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BAUDRATEPRESCALER_2) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_4) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_8) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_16) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_32) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_64) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_128) || \
+ ((PRESCALER) == SPI_BAUDRATEPRESCALER_256))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB transmission
+ * @{
+ */
+#define SPI_FIRSTBIT_MSB ((uint32_t)0x00000000)
+#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST
+
+#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \
+ ((BIT) == SPI_FIRSTBIT_LSB))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_CRC_Calculation SPI CRC Calculation
+ * @{
+ */
+#define SPI_CRCCALCULATION_DISABLED ((uint32_t)0x00000000)
+#define SPI_CRCCALCULATION_ENABLED SPI_CR1_CRCEN
+
+#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLED) || \
+ ((CALCULATION) == SPI_CRCCALCULATION_ENABLED))
+
+#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) (((POLYNOMIAL) >= 0x1) && ((POLYNOMIAL) <= 0xFFFF))
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Interrupt_configuration_definition SPI Interrupt configuration definition
+ * @{
+ */
+#define SPI_IT_TXE SPI_CR2_TXEIE
+#define SPI_IT_RXNE SPI_CR2_RXNEIE
+#define SPI_IT_ERR SPI_CR2_ERRIE
+/**
+ * @}
+ */
+
+/** @defgroup SPI_Flag_definition SPI Flag definition
+ * @{
+ */
+#define SPI_FLAG_RXNE SPI_SR_RXNE
+#define SPI_FLAG_TXE SPI_SR_TXE
+#define SPI_FLAG_CRCERR SPI_SR_CRCERR
+#define SPI_FLAG_MODF SPI_SR_MODF
+#define SPI_FLAG_OVR SPI_SR_OVR
+#define SPI_FLAG_BSY SPI_SR_BSY
+#define SPI_FLAG_FRE SPI_SR_FRE
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/* Exported macro ------------------------------------------------------------*/
+/** @defgroup SPI_Exported_Macros SPI Exported Macros
+ * @{
+ */
+
+/** @brief Reset SPI handle state
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET)
+
+/** @brief Enable or disable the specified SPI interrupts.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__: specifies the interrupt source to enable or disable.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval None
+ */
+#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
+#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR2, (__INTERRUPT__))
+
+/** @brief Check if the specified SPI interrupt source is enabled or disabled.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __INTERRUPT__: specifies the SPI interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_IT_TXE: Tx buffer empty interrupt enable
+ * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable
+ * @arg SPI_IT_ERR: Error interrupt enable
+ * @retval The new state of __IT__ (TRUE or FALSE).
+ */
+#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET)
+
+/** @brief Check whether the specified SPI flag is set or not.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @param __FLAG__: specifies the flag to check.
+ * This parameter can be one of the following values:
+ * @arg SPI_FLAG_RXNE: Receive buffer not empty flag
+ * @arg SPI_FLAG_TXE: Transmit buffer empty flag
+ * @arg SPI_FLAG_CRCERR: CRC error flag
+ * @arg SPI_FLAG_MODF: Mode fault flag
+ * @arg SPI_FLAG_OVR: Overrun flag
+ * @arg SPI_FLAG_BSY: Busy flag
+ * @arg SPI_FLAG_FRE: Frame format error flag
+ * @retval The new state of __FLAG__ (TRUE or FALSE).
+ */
+#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__))
+
+/** @brief Clear the SPI CRCERR pending flag.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = ~(SPI_FLAG_CRCERR))
+
+/** @brief Clear the SPI MODF pending flag.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) do{(__HANDLE__)->Instance->SR;\
+ CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE);}while(0)
+
+/** @brief Clear the SPI OVR pending flag.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) do{(__HANDLE__)->Instance->DR;\
+ (__HANDLE__)->Instance->SR;}while(0)
+
+/** @brief Clear the SPI FRE pending flag.
+ * @param __HANDLE__: specifies the SPI handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR)
+
+/** @brief Enables the SPI.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE)
+
+/** @brief Disables the SPI.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define __HAL_SPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_SPE)
+/**
+ * @}
+ */
+
+
+/* Private macro ------------------------------------------------------------*/
+/** @defgroup SPI_Private_Macros SPI Private Macros
+ * @{
+ */
+
+/** @brief Sets the SPI transmit-only mode.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define SPI_1LINE_TX(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE)
+
+/** @brief Sets the SPI receive-only mode.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define SPI_1LINE_RX(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_BIDIOE)
+
+/** @brief Resets the CRC calculation of the SPI.
+ * @param __HANDLE__: specifies the SPI Handle.
+ * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral.
+ * @retval None
+ */
+#define SPI_RESET_CRC(__HANDLE__) do{CLEAR_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);\
+ SET_BIT((__HANDLE__)->Instance->CR1, SPI_CR1_CRCEN);}while(0)
+/**
+ * @}
+ */
+
+/* Include SPI HAL Extension module */
+#include "stm32l1xx_hal_spi_ex.h"
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup SPI_Exported_Functions
+ * @{
+ */
+
+/* Initialization/de-initialization functions **********************************/
+/** @addtogroup SPI_Exported_Functions_Group1
+ * @{
+ */
+HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DeInit (SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi);
+void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+/* I/O operation functions *****************************************************/
+/** @addtogroup SPI_Exported_Functions_Group2
+ * @{
+ */
+HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout);
+HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size);
+HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi);
+HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi);
+
+void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi);
+/**
+ * @}
+ */
+
+
+/* Peripheral State and Control functions **************************************/
+/** @addtogroup SPI_Exported_Functions_Group3
+ * @{
+ */
+HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi);
+HAL_SPI_ErrorTypeDef HAL_SPI_GetError(SPI_HandleTypeDef *hspi);
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32L1xx_HAL_SPI_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/