frederic blanc
/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/hal/adc/fsl_adc_hal.h substitute line 894 extern } by }
Fork of
mbed
by 
mbed official
TARGET_NUCLEO_F072RB/stm32f0xx_hal_uart.h@92:4fc01daae5a5, 2014-11-27 (annotated)
- Committer:
- bogdanm
- Date:
- Thu Nov 27 13:33:22 2014 +0000
- Revision:
- 92:4fc01daae5a5
- Parent:
- 85:024bf7f99721
Release 92 of the mbed libray
Main changes:
- nRF51822: fixed pin assignment issues
- ST targets moving to the STM32Cube driver
- LPC1439: fixed serial interrupt issue
- first Cortex-A platform supported in mbed (RZ_A1H)
Who changed what in which revision?
| User | Revision | Line number | New contents of line |
|---|---|---|---|
| bogdanm | 85:024bf7f99721 | 1 | /** |
| bogdanm | 85:024bf7f99721 | 2 | ****************************************************************************** |
| bogdanm | 85:024bf7f99721 | 3 | * @file stm32f0xx_hal_uart.h |
| bogdanm | 85:024bf7f99721 | 4 | * @author MCD Application Team |
| bogdanm | 92:4fc01daae5a5 | 5 | * @version V1.1.0 |
| bogdanm | 92:4fc01daae5a5 | 6 | * @date 03-Oct-2014 |
| bogdanm | 85:024bf7f99721 | 7 | * @brief Header file of UART HAL module. |
| bogdanm | 85:024bf7f99721 | 8 | ****************************************************************************** |
| bogdanm | 85:024bf7f99721 | 9 | * @attention |
| bogdanm | 85:024bf7f99721 | 10 | * |
| bogdanm | 85:024bf7f99721 | 11 | * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> |
| bogdanm | 85:024bf7f99721 | 12 | * |
| bogdanm | 85:024bf7f99721 | 13 | * Redistribution and use in source and binary forms, with or without modification, |
| bogdanm | 85:024bf7f99721 | 14 | * are permitted provided that the following conditions are met: |
| bogdanm | 85:024bf7f99721 | 15 | * 1. Redistributions of source code must retain the above copyright notice, |
| bogdanm | 85:024bf7f99721 | 16 | * this list of conditions and the following disclaimer. |
| bogdanm | 85:024bf7f99721 | 17 | * 2. Redistributions in binary form must reproduce the above copyright notice, |
| bogdanm | 85:024bf7f99721 | 18 | * this list of conditions and the following disclaimer in the documentation |
| bogdanm | 85:024bf7f99721 | 19 | * and/or other materials provided with the distribution. |
| bogdanm | 85:024bf7f99721 | 20 | * 3. Neither the name of STMicroelectronics nor the names of its contributors |
| bogdanm | 85:024bf7f99721 | 21 | * may be used to endorse or promote products derived from this software |
| bogdanm | 85:024bf7f99721 | 22 | * without specific prior written permission. |
| bogdanm | 85:024bf7f99721 | 23 | * |
| bogdanm | 85:024bf7f99721 | 24 | * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| bogdanm | 85:024bf7f99721 | 25 | * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| bogdanm | 85:024bf7f99721 | 26 | * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| bogdanm | 85:024bf7f99721 | 27 | * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
| bogdanm | 85:024bf7f99721 | 28 | * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| bogdanm | 85:024bf7f99721 | 29 | * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| bogdanm | 85:024bf7f99721 | 30 | * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| bogdanm | 85:024bf7f99721 | 31 | * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| bogdanm | 85:024bf7f99721 | 32 | * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| bogdanm | 85:024bf7f99721 | 33 | * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| bogdanm | 85:024bf7f99721 | 34 | * |
| bogdanm | 85:024bf7f99721 | 35 | ****************************************************************************** |
| bogdanm | 85:024bf7f99721 | 36 | */ |
| bogdanm | 85:024bf7f99721 | 37 | |
| bogdanm | 85:024bf7f99721 | 38 | /* Define to prevent recursive inclusion -------------------------------------*/ |
| bogdanm | 85:024bf7f99721 | 39 | #ifndef __STM32F0xx_HAL_UART_H |
| bogdanm | 85:024bf7f99721 | 40 | #define __STM32F0xx_HAL_UART_H |
| bogdanm | 85:024bf7f99721 | 41 | |
| bogdanm | 85:024bf7f99721 | 42 | #ifdef __cplusplus |
| bogdanm | 85:024bf7f99721 | 43 | extern "C" { |
| bogdanm | 85:024bf7f99721 | 44 | #endif |
| bogdanm | 85:024bf7f99721 | 45 | |
| bogdanm | 85:024bf7f99721 | 46 | /* Includes ------------------------------------------------------------------*/ |
| bogdanm | 85:024bf7f99721 | 47 | #include "stm32f0xx_hal_def.h" |
| bogdanm | 85:024bf7f99721 | 48 | |
| bogdanm | 85:024bf7f99721 | 49 | /** @addtogroup STM32F0xx_HAL_Driver |
| bogdanm | 85:024bf7f99721 | 50 | * @{ |
| bogdanm | 85:024bf7f99721 | 51 | */ |
| bogdanm | 85:024bf7f99721 | 52 | |
| bogdanm | 85:024bf7f99721 | 53 | /** @addtogroup UART |
| bogdanm | 85:024bf7f99721 | 54 | * @{ |
| bogdanm | 85:024bf7f99721 | 55 | */ |
| bogdanm | 85:024bf7f99721 | 56 | |
| bogdanm | 85:024bf7f99721 | 57 | /* Exported types ------------------------------------------------------------*/ |
| bogdanm | 92:4fc01daae5a5 | 58 | /** @defgroup UART_Exported_Types UART Exported Types |
| bogdanm | 92:4fc01daae5a5 | 59 | * @{ |
| bogdanm | 92:4fc01daae5a5 | 60 | */ |
| bogdanm | 92:4fc01daae5a5 | 61 | |
| bogdanm | 85:024bf7f99721 | 62 | |
| bogdanm | 85:024bf7f99721 | 63 | /** |
| bogdanm | 85:024bf7f99721 | 64 | * @brief UART Init Structure definition |
| bogdanm | 85:024bf7f99721 | 65 | */ |
| bogdanm | 85:024bf7f99721 | 66 | typedef struct |
| bogdanm | 85:024bf7f99721 | 67 | { |
| bogdanm | 85:024bf7f99721 | 68 | uint32_t BaudRate; /*!< This member configures the UART communication baud rate. |
| bogdanm | 85:024bf7f99721 | 69 | The baud rate register is computed using the following formula: |
| bogdanm | 85:024bf7f99721 | 70 | - If oversampling is 16 or in LIN mode (LIN mode not available on F030xx devices), |
| bogdanm | 85:024bf7f99721 | 71 | Baud Rate Register = ((PCLKx) / ((huart->Init.BaudRate))) |
| bogdanm | 85:024bf7f99721 | 72 | - If oversampling is 8, |
| bogdanm | 85:024bf7f99721 | 73 | Baud Rate Register[15:4] = ((2 * PCLKx) / ((huart->Init.BaudRate)))[15:4] |
| bogdanm | 85:024bf7f99721 | 74 | Baud Rate Register[3] = 0 |
| bogdanm | 85:024bf7f99721 | 75 | Baud Rate Register[2:0] = (((2 * PCLKx) / ((huart->Init.BaudRate)))[3:0]) >> 1 */ |
| bogdanm | 85:024bf7f99721 | 76 | |
| bogdanm | 85:024bf7f99721 | 77 | uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. |
| bogdanm | 85:024bf7f99721 | 78 | This parameter can be a value of @ref UARTEx_Word_Length */ |
| bogdanm | 85:024bf7f99721 | 79 | |
| bogdanm | 85:024bf7f99721 | 80 | uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. |
| bogdanm | 85:024bf7f99721 | 81 | This parameter can be a value of @ref UART_Stop_Bits */ |
| bogdanm | 85:024bf7f99721 | 82 | |
| bogdanm | 85:024bf7f99721 | 83 | uint32_t Parity; /*!< Specifies the parity mode. |
| bogdanm | 85:024bf7f99721 | 84 | This parameter can be a value of @ref UART_Parity |
| bogdanm | 85:024bf7f99721 | 85 | @note When parity is enabled, the computed parity is inserted |
| bogdanm | 85:024bf7f99721 | 86 | at the MSB position of the transmitted data (9th bit when |
| bogdanm | 85:024bf7f99721 | 87 | the word length is set to 9 data bits; 8th bit when the |
| bogdanm | 85:024bf7f99721 | 88 | word length is set to 8 data bits). */ |
| bogdanm | 85:024bf7f99721 | 89 | |
| bogdanm | 92:4fc01daae5a5 | 90 | uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. |
| bogdanm | 85:024bf7f99721 | 91 | This parameter can be a value of @ref UART_Mode */ |
| bogdanm | 85:024bf7f99721 | 92 | |
| bogdanm | 92:4fc01daae5a5 | 93 | uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled |
| bogdanm | 85:024bf7f99721 | 94 | or disabled. |
| bogdanm | 85:024bf7f99721 | 95 | This parameter can be a value of @ref UART_Hardware_Flow_Control */ |
| bogdanm | 85:024bf7f99721 | 96 | |
| bogdanm | 92:4fc01daae5a5 | 97 | uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8). |
| bogdanm | 85:024bf7f99721 | 98 | This parameter can be a value of @ref UART_Over_Sampling */ |
| bogdanm | 85:024bf7f99721 | 99 | |
| bogdanm | 92:4fc01daae5a5 | 100 | uint32_t OneBitSampling; /*!< Specifies whether a single sample or three samples' majority vote is selected. |
| bogdanm | 85:024bf7f99721 | 101 | Selecting the single sample method increases the receiver tolerance to clock |
| bogdanm | 85:024bf7f99721 | 102 | deviations. This parameter can be a value of @ref UART_OneBit_Sampling. */ |
| bogdanm | 85:024bf7f99721 | 103 | }UART_InitTypeDef; |
| bogdanm | 85:024bf7f99721 | 104 | |
| bogdanm | 85:024bf7f99721 | 105 | /** |
| bogdanm | 85:024bf7f99721 | 106 | * @brief UART Advanced Features initalization structure definition |
| bogdanm | 85:024bf7f99721 | 107 | */ |
| bogdanm | 85:024bf7f99721 | 108 | typedef struct |
| bogdanm | 85:024bf7f99721 | 109 | { |
| bogdanm | 85:024bf7f99721 | 110 | uint32_t AdvFeatureInit; /*!< Specifies which advanced UART features is initialized. Several |
| bogdanm | 85:024bf7f99721 | 111 | Advanced Features may be initialized at the same time . |
| bogdanm | 85:024bf7f99721 | 112 | This parameter can be a value of @ref UART_Advanced_Features_Initialization_Type */ |
| bogdanm | 85:024bf7f99721 | 113 | |
| bogdanm | 85:024bf7f99721 | 114 | uint32_t TxPinLevelInvert; /*!< Specifies whether the TX pin active level is inverted. |
| bogdanm | 85:024bf7f99721 | 115 | This parameter can be a value of @ref UART_Tx_Inv */ |
| bogdanm | 85:024bf7f99721 | 116 | |
| bogdanm | 85:024bf7f99721 | 117 | uint32_t RxPinLevelInvert; /*!< Specifies whether the RX pin active level is inverted. |
| bogdanm | 85:024bf7f99721 | 118 | This parameter can be a value of @ref UART_Rx_Inv */ |
| bogdanm | 85:024bf7f99721 | 119 | |
| bogdanm | 85:024bf7f99721 | 120 | uint32_t DataInvert; /*!< Specifies whether data are inverted (positive/direct logic |
| bogdanm | 85:024bf7f99721 | 121 | vs negative/inverted logic). |
| bogdanm | 85:024bf7f99721 | 122 | This parameter can be a value of @ref UART_Data_Inv */ |
| bogdanm | 85:024bf7f99721 | 123 | |
| bogdanm | 85:024bf7f99721 | 124 | uint32_t Swap; /*!< Specifies whether TX and RX pins are swapped. |
| bogdanm | 85:024bf7f99721 | 125 | This parameter can be a value of @ref UART_Rx_Tx_Swap */ |
| bogdanm | 85:024bf7f99721 | 126 | |
| bogdanm | 85:024bf7f99721 | 127 | uint32_t OverrunDisable; /*!< Specifies whether the reception overrun detection is disabled. |
| bogdanm | 85:024bf7f99721 | 128 | This parameter can be a value of @ref UART_Overrun_Disable */ |
| bogdanm | 85:024bf7f99721 | 129 | |
| bogdanm | 85:024bf7f99721 | 130 | uint32_t DMADisableonRxError; /*!< Specifies whether the DMA is disabled in case of reception error. |
| bogdanm | 85:024bf7f99721 | 131 | This parameter can be a value of @ref UART_DMA_Disable_on_Rx_Error */ |
| bogdanm | 85:024bf7f99721 | 132 | |
| bogdanm | 85:024bf7f99721 | 133 | uint32_t AutoBaudRateEnable; /*!< Specifies whether auto Baud rate detection is enabled. |
| bogdanm | 85:024bf7f99721 | 134 | This parameter can be a value of @ref UART_AutoBaudRate_Enable */ |
| bogdanm | 85:024bf7f99721 | 135 | |
| bogdanm | 85:024bf7f99721 | 136 | uint32_t AutoBaudRateMode; /*!< If auto Baud rate detection is enabled, specifies how the rate |
| bogdanm | 85:024bf7f99721 | 137 | detection is carried out. |
| bogdanm | 85:024bf7f99721 | 138 | This parameter can be a value of @ref UARTEx_AutoBaud_Rate_Mode */ |
| bogdanm | 85:024bf7f99721 | 139 | |
| bogdanm | 85:024bf7f99721 | 140 | uint32_t MSBFirst; /*!< Specifies whether MSB is sent first on UART line. |
| bogdanm | 85:024bf7f99721 | 141 | This parameter can be a value of @ref UART_MSB_First */ |
| bogdanm | 85:024bf7f99721 | 142 | } UART_AdvFeatureInitTypeDef; |
| bogdanm | 85:024bf7f99721 | 143 | |
| bogdanm | 85:024bf7f99721 | 144 | /** |
| bogdanm | 85:024bf7f99721 | 145 | * @brief UART wake up from stop mode parameters |
| bogdanm | 85:024bf7f99721 | 146 | */ |
| bogdanm | 85:024bf7f99721 | 147 | typedef struct |
| bogdanm | 85:024bf7f99721 | 148 | { |
| bogdanm | 85:024bf7f99721 | 149 | uint32_t WakeUpEvent; /*!< Specifies which event will activat the Wakeup from Stop mode flag (WUF). |
| bogdanm | 85:024bf7f99721 | 150 | This parameter can be a value of @ref UART_WakeUp_from_Stop_Selection. |
| bogdanm | 85:024bf7f99721 | 151 | If set to UART_WAKEUP_ON_ADDRESS, the two other fields below must |
| bogdanm | 85:024bf7f99721 | 152 | be filled up. */ |
| bogdanm | 85:024bf7f99721 | 153 | |
| bogdanm | 85:024bf7f99721 | 154 | uint16_t AddressLength; /*!< Specifies whether the address is 4 or 7-bit long. |
| bogdanm | 85:024bf7f99721 | 155 | This parameter can be a value of @ref UART_WakeUp_Address_Length */ |
| bogdanm | 85:024bf7f99721 | 156 | |
| bogdanm | 85:024bf7f99721 | 157 | uint8_t Address; /*!< UART/USART node address (7-bit long max) */ |
| bogdanm | 85:024bf7f99721 | 158 | } UART_WakeUpTypeDef; |
| bogdanm | 85:024bf7f99721 | 159 | |
| bogdanm | 85:024bf7f99721 | 160 | /** |
| bogdanm | 85:024bf7f99721 | 161 | * @brief HAL UART State structures definition |
| bogdanm | 85:024bf7f99721 | 162 | */ |
| bogdanm | 85:024bf7f99721 | 163 | typedef enum |
| bogdanm | 85:024bf7f99721 | 164 | { |
| bogdanm | 85:024bf7f99721 | 165 | HAL_UART_STATE_RESET = 0x00, /*!< Peripheral is not initialized */ |
| bogdanm | 85:024bf7f99721 | 166 | HAL_UART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ |
| bogdanm | 85:024bf7f99721 | 167 | HAL_UART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ |
| bogdanm | 85:024bf7f99721 | 168 | HAL_UART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ |
| bogdanm | 85:024bf7f99721 | 169 | HAL_UART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ |
| bogdanm | 85:024bf7f99721 | 170 | HAL_UART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */ |
| bogdanm | 85:024bf7f99721 | 171 | HAL_UART_STATE_TIMEOUT = 0x03, /*!< Timeout state */ |
| bogdanm | 85:024bf7f99721 | 172 | HAL_UART_STATE_ERROR = 0x04 /*!< Error */ |
| bogdanm | 85:024bf7f99721 | 173 | }HAL_UART_StateTypeDef; |
| bogdanm | 85:024bf7f99721 | 174 | |
| bogdanm | 85:024bf7f99721 | 175 | /** |
| bogdanm | 85:024bf7f99721 | 176 | * @brief HAL UART Error Code structure definition |
| bogdanm | 85:024bf7f99721 | 177 | */ |
| bogdanm | 85:024bf7f99721 | 178 | typedef enum |
| bogdanm | 85:024bf7f99721 | 179 | { |
| bogdanm | 85:024bf7f99721 | 180 | HAL_UART_ERROR_NONE = 0x00, /*!< No error */ |
| bogdanm | 85:024bf7f99721 | 181 | HAL_UART_ERROR_PE = 0x01, /*!< Parity error */ |
| bogdanm | 85:024bf7f99721 | 182 | HAL_UART_ERROR_NE = 0x02, /*!< Noise error */ |
| bogdanm | 85:024bf7f99721 | 183 | HAL_UART_ERROR_FE = 0x04, /*!< frame error */ |
| bogdanm | 85:024bf7f99721 | 184 | HAL_UART_ERROR_ORE = 0x08, /*!< Overrun error */ |
| bogdanm | 85:024bf7f99721 | 185 | HAL_UART_ERROR_DMA = 0x10 /*!< DMA transfer error */ |
| bogdanm | 85:024bf7f99721 | 186 | }HAL_UART_ErrorTypeDef; |
| bogdanm | 85:024bf7f99721 | 187 | |
| bogdanm | 85:024bf7f99721 | 188 | /** |
| bogdanm | 85:024bf7f99721 | 189 | * @brief UART clock sources definition |
| bogdanm | 85:024bf7f99721 | 190 | */ |
| bogdanm | 85:024bf7f99721 | 191 | typedef enum |
| bogdanm | 85:024bf7f99721 | 192 | { |
| bogdanm | 85:024bf7f99721 | 193 | UART_CLOCKSOURCE_PCLK1 = 0x00, /*!< PCLK1 clock source */ |
| bogdanm | 85:024bf7f99721 | 194 | UART_CLOCKSOURCE_HSI = 0x02, /*!< HSI clock source */ |
| bogdanm | 85:024bf7f99721 | 195 | UART_CLOCKSOURCE_SYSCLK = 0x04, /*!< SYSCLK clock source */ |
| bogdanm | 85:024bf7f99721 | 196 | UART_CLOCKSOURCE_LSE = 0x08, /*!< LSE clock source */ |
| bogdanm | 85:024bf7f99721 | 197 | UART_CLOCKSOURCE_UNDEFINED = 0x10 /*!< undefined clock source */ |
| bogdanm | 85:024bf7f99721 | 198 | }UART_ClockSourceTypeDef; |
| bogdanm | 85:024bf7f99721 | 199 | |
| bogdanm | 85:024bf7f99721 | 200 | /** |
| bogdanm | 85:024bf7f99721 | 201 | * @brief UART handle Structure definition |
| bogdanm | 85:024bf7f99721 | 202 | */ |
| bogdanm | 85:024bf7f99721 | 203 | typedef struct |
| bogdanm | 85:024bf7f99721 | 204 | { |
| bogdanm | 85:024bf7f99721 | 205 | USART_TypeDef *Instance; /* UART registers base address */ |
| bogdanm | 85:024bf7f99721 | 206 | |
| bogdanm | 85:024bf7f99721 | 207 | UART_InitTypeDef Init; /* UART communication parameters */ |
| bogdanm | 85:024bf7f99721 | 208 | |
| bogdanm | 85:024bf7f99721 | 209 | UART_AdvFeatureInitTypeDef AdvancedInit; /* UART Advanced Features initialization parameters */ |
| bogdanm | 85:024bf7f99721 | 210 | |
| bogdanm | 85:024bf7f99721 | 211 | uint8_t *pTxBuffPtr; /* Pointer to UART Tx transfer Buffer */ |
| bogdanm | 85:024bf7f99721 | 212 | |
| bogdanm | 85:024bf7f99721 | 213 | uint16_t TxXferSize; /* UART Tx Transfer size */ |
| bogdanm | 85:024bf7f99721 | 214 | |
| bogdanm | 85:024bf7f99721 | 215 | uint16_t TxXferCount; /* UART Tx Transfer Counter */ |
| bogdanm | 85:024bf7f99721 | 216 | |
| bogdanm | 85:024bf7f99721 | 217 | uint8_t *pRxBuffPtr; /* Pointer to UART Rx transfer Buffer */ |
| bogdanm | 85:024bf7f99721 | 218 | |
| bogdanm | 85:024bf7f99721 | 219 | uint16_t RxXferSize; /* UART Rx Transfer size */ |
| bogdanm | 85:024bf7f99721 | 220 | |
| bogdanm | 85:024bf7f99721 | 221 | uint16_t RxXferCount; /* UART Rx Transfer Counter */ |
| bogdanm | 85:024bf7f99721 | 222 | |
| bogdanm | 85:024bf7f99721 | 223 | uint16_t Mask; /* UART Rx RDR register mask */ |
| bogdanm | 85:024bf7f99721 | 224 | |
| bogdanm | 85:024bf7f99721 | 225 | DMA_HandleTypeDef *hdmatx; /* UART Tx DMA Handle parameters */ |
| bogdanm | 85:024bf7f99721 | 226 | |
| bogdanm | 85:024bf7f99721 | 227 | DMA_HandleTypeDef *hdmarx; /* UART Rx DMA Handle parameters */ |
| bogdanm | 85:024bf7f99721 | 228 | |
| bogdanm | 85:024bf7f99721 | 229 | HAL_LockTypeDef Lock; /* Locking object */ |
| bogdanm | 85:024bf7f99721 | 230 | |
| bogdanm | 85:024bf7f99721 | 231 | HAL_UART_StateTypeDef State; /* UART communication state */ |
| bogdanm | 85:024bf7f99721 | 232 | |
| bogdanm | 85:024bf7f99721 | 233 | HAL_UART_ErrorTypeDef ErrorCode; /* UART Error code */ |
| bogdanm | 85:024bf7f99721 | 234 | |
| bogdanm | 85:024bf7f99721 | 235 | }UART_HandleTypeDef; |
| bogdanm | 85:024bf7f99721 | 236 | |
| bogdanm | 92:4fc01daae5a5 | 237 | /** |
| bogdanm | 92:4fc01daae5a5 | 238 | * @} |
| bogdanm | 92:4fc01daae5a5 | 239 | */ |
| bogdanm | 85:024bf7f99721 | 240 | |
| bogdanm | 85:024bf7f99721 | 241 | /* Exported constants --------------------------------------------------------*/ |
| bogdanm | 92:4fc01daae5a5 | 242 | /** @defgroup UART_Exported_Constants UART Exported constants |
| bogdanm | 85:024bf7f99721 | 243 | * @{ |
| bogdanm | 85:024bf7f99721 | 244 | */ |
| bogdanm | 85:024bf7f99721 | 245 | |
| bogdanm | 85:024bf7f99721 | 246 | /** @defgroup UART_Stop_Bits UART Number of Stop Bits |
| bogdanm | 85:024bf7f99721 | 247 | * @{ |
| bogdanm | 85:024bf7f99721 | 248 | */ |
| bogdanm | 85:024bf7f99721 | 249 | #define UART_STOPBITS_1 ((uint32_t)0x0000) |
| bogdanm | 85:024bf7f99721 | 250 | #define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1) |
| bogdanm | 85:024bf7f99721 | 251 | #define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \ |
| bogdanm | 85:024bf7f99721 | 252 | ((STOPBITS) == UART_STOPBITS_2)) |
| bogdanm | 85:024bf7f99721 | 253 | /** |
| bogdanm | 85:024bf7f99721 | 254 | * @} |
| bogdanm | 85:024bf7f99721 | 255 | */ |
| bogdanm | 85:024bf7f99721 | 256 | |
| bogdanm | 85:024bf7f99721 | 257 | /** @defgroup UART_Parity UART Parity |
| bogdanm | 85:024bf7f99721 | 258 | * @{ |
| bogdanm | 85:024bf7f99721 | 259 | */ |
| bogdanm | 85:024bf7f99721 | 260 | #define UART_PARITY_NONE ((uint32_t)0x0000) |
| bogdanm | 85:024bf7f99721 | 261 | #define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE) |
| bogdanm | 85:024bf7f99721 | 262 | #define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) |
| bogdanm | 85:024bf7f99721 | 263 | #define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \ |
| bogdanm | 85:024bf7f99721 | 264 | ((PARITY) == UART_PARITY_EVEN) || \ |
| bogdanm | 85:024bf7f99721 | 265 | ((PARITY) == UART_PARITY_ODD)) |
| bogdanm | 85:024bf7f99721 | 266 | /** |
| bogdanm | 85:024bf7f99721 | 267 | * @} |
| bogdanm | 85:024bf7f99721 | 268 | */ |
| bogdanm | 85:024bf7f99721 | 269 | |
| bogdanm | 85:024bf7f99721 | 270 | /** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control |
| bogdanm | 85:024bf7f99721 | 271 | * @{ |
| bogdanm | 85:024bf7f99721 | 272 | */ |
| bogdanm | 85:024bf7f99721 | 273 | #define UART_HWCONTROL_NONE ((uint32_t)0x0000) |
| bogdanm | 85:024bf7f99721 | 274 | #define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE) |
| bogdanm | 85:024bf7f99721 | 275 | #define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE) |
| bogdanm | 85:024bf7f99721 | 276 | #define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE)) |
| bogdanm | 85:024bf7f99721 | 277 | #define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\ |
| bogdanm | 85:024bf7f99721 | 278 | (((CONTROL) == UART_HWCONTROL_NONE) || \ |
| bogdanm | 85:024bf7f99721 | 279 | ((CONTROL) == UART_HWCONTROL_RTS) || \ |
| bogdanm | 85:024bf7f99721 | 280 | ((CONTROL) == UART_HWCONTROL_CTS) || \ |
| bogdanm | 85:024bf7f99721 | 281 | ((CONTROL) == UART_HWCONTROL_RTS_CTS)) |
| bogdanm | 85:024bf7f99721 | 282 | /** |
| bogdanm | 85:024bf7f99721 | 283 | * @} |
| bogdanm | 85:024bf7f99721 | 284 | */ |
| bogdanm | 85:024bf7f99721 | 285 | |
| bogdanm | 85:024bf7f99721 | 286 | /** @defgroup UART_Mode UART Transfer Mode |
| bogdanm | 85:024bf7f99721 | 287 | * @{ |
| bogdanm | 85:024bf7f99721 | 288 | */ |
| bogdanm | 85:024bf7f99721 | 289 | #define UART_MODE_RX ((uint32_t)USART_CR1_RE) |
| bogdanm | 85:024bf7f99721 | 290 | #define UART_MODE_TX ((uint32_t)USART_CR1_TE) |
| bogdanm | 85:024bf7f99721 | 291 | #define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) |
| bogdanm | 85:024bf7f99721 | 292 | #define IS_UART_MODE(MODE) ((((MODE) & (~((uint32_t)(UART_MODE_TX_RX)))) == (uint32_t)0x00) && ((MODE) != (uint32_t)0x00)) |
| bogdanm | 85:024bf7f99721 | 293 | /** |
| bogdanm | 85:024bf7f99721 | 294 | * @} |
| bogdanm | 85:024bf7f99721 | 295 | */ |
| bogdanm | 85:024bf7f99721 | 296 | |
| bogdanm | 85:024bf7f99721 | 297 | /** @defgroup UART_State UART State |
| bogdanm | 85:024bf7f99721 | 298 | * @{ |
| bogdanm | 85:024bf7f99721 | 299 | */ |
| bogdanm | 85:024bf7f99721 | 300 | #define UART_STATE_DISABLE ((uint32_t)0x0000) |
| bogdanm | 85:024bf7f99721 | 301 | #define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE) |
| bogdanm | 85:024bf7f99721 | 302 | #define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \ |
| bogdanm | 85:024bf7f99721 | 303 | ((STATE) == UART_STATE_ENABLE)) |
| bogdanm | 85:024bf7f99721 | 304 | /** |
| bogdanm | 85:024bf7f99721 | 305 | * @} |
| bogdanm | 85:024bf7f99721 | 306 | */ |
| bogdanm | 85:024bf7f99721 | 307 | |
| bogdanm | 85:024bf7f99721 | 308 | /** @defgroup UART_Over_Sampling UART Over Sampling |
| bogdanm | 85:024bf7f99721 | 309 | * @{ |
| bogdanm | 85:024bf7f99721 | 310 | */ |
| bogdanm | 85:024bf7f99721 | 311 | #define UART_OVERSAMPLING_16 ((uint32_t)0x0000) |
| bogdanm | 85:024bf7f99721 | 312 | #define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8) |
| bogdanm | 85:024bf7f99721 | 313 | #define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \ |
| bogdanm | 85:024bf7f99721 | 314 | ((SAMPLING) == UART_OVERSAMPLING_8)) |
| bogdanm | 85:024bf7f99721 | 315 | /** |
| bogdanm | 85:024bf7f99721 | 316 | * @} |
| bogdanm | 85:024bf7f99721 | 317 | */ |
| bogdanm | 85:024bf7f99721 | 318 | |
| bogdanm | 85:024bf7f99721 | 319 | /** @defgroup UART_OneBit_Sampling UART One Bit Sampling Method |
| bogdanm | 85:024bf7f99721 | 320 | * @{ |
| bogdanm | 85:024bf7f99721 | 321 | */ |
| bogdanm | 85:024bf7f99721 | 322 | #define UART_ONEBIT_SAMPLING_DISABLED ((uint32_t)0x0000) |
| bogdanm | 85:024bf7f99721 | 323 | #define UART_ONEBIT_SAMPLING_ENABLED ((uint32_t)USART_CR3_ONEBIT) |
| bogdanm | 85:024bf7f99721 | 324 | #define IS_UART_ONEBIT_SAMPLING(ONEBIT) (((ONEBIT) == UART_ONEBIT_SAMPLING_DISABLED) || \ |
| bogdanm | 85:024bf7f99721 | 325 | ((ONEBIT) == UART_ONEBIT_SAMPLING_ENABLED)) |
| bogdanm | 85:024bf7f99721 | 326 | /** |
| bogdanm | 85:024bf7f99721 | 327 | * @} |
| bogdanm | 85:024bf7f99721 | 328 | */ |
| bogdanm | 85:024bf7f99721 | 329 | |
| bogdanm | 85:024bf7f99721 | 330 | |
| bogdanm | 85:024bf7f99721 | 331 | /** @defgroup UART_Receiver_TimeOut UART Receiver TimeOut |
| bogdanm | 85:024bf7f99721 | 332 | * @{ |
| bogdanm | 85:024bf7f99721 | 333 | */ |
| bogdanm | 85:024bf7f99721 | 334 | #define UART_RECEIVER_TIMEOUT_DISABLE ((uint32_t)0x00000000) |
| bogdanm | 85:024bf7f99721 | 335 | #define UART_RECEIVER_TIMEOUT_ENABLE ((uint32_t)USART_CR2_RTOEN) |
| bogdanm | 85:024bf7f99721 | 336 | #define IS_UART_RECEIVER_TIMEOUT(TIMEOUT) (((TIMEOUT) == UART_RECEIVER_TIMEOUT_DISABLE) || \ |
| bogdanm | 85:024bf7f99721 | 337 | ((TIMEOUT) == UART_RECEIVER_TIMEOUT_ENABLE)) |
| bogdanm | 85:024bf7f99721 | 338 | /** |
| bogdanm | 85:024bf7f99721 | 339 | * @} |
| bogdanm | 85:024bf7f99721 | 340 | */ |
| bogdanm | 85:024bf7f99721 | 341 | |
| bogdanm | 85:024bf7f99721 | 342 | /** @defgroup UART_One_Bit UART One Bit sampling |
| bogdanm | 85:024bf7f99721 | 343 | * @{ |
| bogdanm | 85:024bf7f99721 | 344 | */ |
| bogdanm | 85:024bf7f99721 | 345 | #define UART_ONE_BIT_SAMPLE_DISABLED ((uint32_t)0x00000000) |
| bogdanm | 85:024bf7f99721 | 346 | #define UART_ONE_BIT_SAMPLE_ENABLED ((uint32_t)USART_CR3_ONEBIT) |
| bogdanm | 85:024bf7f99721 | 347 | #define IS_UART_ONEBIT_SAMPLE(ONEBIT) (((ONEBIT) == UART_ONE_BIT_SAMPLE_DISABLED) || \ |
| bogdanm | 85:024bf7f99721 | 348 | ((ONEBIT) == UART_ONE_BIT_SAMPLE_ENABLED)) |
| bogdanm | 85:024bf7f99721 | 349 | /** |
| bogdanm | 85:024bf7f99721 | 350 | * @} |
| bogdanm | 85:024bf7f99721 | 351 | */ |
| bogdanm | 85:024bf7f99721 | 352 | |
| bogdanm | 85:024bf7f99721 | 353 | /** @defgroup UART_DMA_Tx UART DMA Tx |
| bogdanm | 85:024bf7f99721 | 354 | * @{ |
| bogdanm | 85:024bf7f99721 | 355 | */ |
| bogdanm | 85:024bf7f99721 | 356 | #define UART_DMA_TX_DISABLE ((uint32_t)0x00000000) |
| bogdanm | 85:024bf7f99721 | 357 | #define UART_DMA_TX_ENABLE ((uint32_t)USART_CR3_DMAT) |
| bogdanm | 85:024bf7f99721 | 358 | #define IS_UART_DMA_TX(DMATX) (((DMATX) == UART_DMA_TX_DISABLE) || \ |
| bogdanm | 85:024bf7f99721 | 359 | ((DMATX) == UART_DMA_TX_ENABLE)) |
| bogdanm | 85:024bf7f99721 | 360 | /** |
| bogdanm | 85:024bf7f99721 | 361 | * @} |
| bogdanm | 85:024bf7f99721 | 362 | */ |
| bogdanm | 85:024bf7f99721 | 363 | |
| bogdanm | 85:024bf7f99721 | 364 | /** @defgroup UART_DMA_Rx UART DMA Rx |
| bogdanm | 85:024bf7f99721 | 365 | * @{ |
| bogdanm | 85:024bf7f99721 | 366 | */ |
| bogdanm | 85:024bf7f99721 | 367 | #define UART_DMA_RX_DISABLE ((uint32_t)0x0000) |
| bogdanm | 85:024bf7f99721 | 368 | #define UART_DMA_RX_ENABLE ((uint32_t)USART_CR3_DMAR) |
| bogdanm | 85:024bf7f99721 | 369 | #define IS_UART_DMA_RX(DMARX) (((DMARX) == UART_DMA_RX_DISABLE) || \ |
| bogdanm | 85:024bf7f99721 | 370 | ((DMARX) == UART_DMA_RX_ENABLE)) |
| bogdanm | 85:024bf7f99721 | 371 | /** |
| bogdanm | 85:024bf7f99721 | 372 | * @} |
| bogdanm | 85:024bf7f99721 | 373 | */ |
| bogdanm | 85:024bf7f99721 | 374 | |
| bogdanm | 85:024bf7f99721 | 375 | /** @defgroup UART_Half_Duplex_Selection UART Half Duplex Selection |
| bogdanm | 85:024bf7f99721 | 376 | * @{ |
| bogdanm | 85:024bf7f99721 | 377 | */ |
| bogdanm | 85:024bf7f99721 | 378 | #define UART_HALF_DUPLEX_DISABLE ((uint32_t)0x0000) |
| bogdanm | 85:024bf7f99721 | 379 | #define UART_HALF_DUPLEX_ENABLE ((uint32_t)USART_CR3_HDSEL) |
| bogdanm | 85:024bf7f99721 | 380 | #define IS_UART_HALF_DUPLEX(HDSEL) (((HDSEL) == UART_HALF_DUPLEX_DISABLE) || \ |
| bogdanm | 85:024bf7f99721 | 381 | ((HDSEL) == UART_HALF_DUPLEX_ENABLE)) |
| bogdanm | 85:024bf7f99721 | 382 | /** |
| bogdanm | 85:024bf7f99721 | 383 | * @} |
| bogdanm | 85:024bf7f99721 | 384 | */ |
| bogdanm | 85:024bf7f99721 | 385 | |
| bogdanm | 85:024bf7f99721 | 386 | /** @defgroup UART_WakeUp_Address_Length UART WakeUp Address Length |
| bogdanm | 85:024bf7f99721 | 387 | * @{ |
| bogdanm | 85:024bf7f99721 | 388 | */ |
| bogdanm | 85:024bf7f99721 | 389 | #define UART_ADDRESS_DETECT_4B ((uint32_t)0x00000000) |
| bogdanm | 85:024bf7f99721 | 390 | #define UART_ADDRESS_DETECT_7B ((uint32_t)USART_CR2_ADDM7) |
| bogdanm | 85:024bf7f99721 | 391 | #define IS_UART_ADDRESSLENGTH_DETECT(ADDRESS) (((ADDRESS) == UART_ADDRESS_DETECT_4B) || \ |
| bogdanm | 85:024bf7f99721 | 392 | ((ADDRESS) == UART_ADDRESS_DETECT_7B)) |
| bogdanm | 85:024bf7f99721 | 393 | /** |
| bogdanm | 85:024bf7f99721 | 394 | * @} |
| bogdanm | 85:024bf7f99721 | 395 | */ |
| bogdanm | 85:024bf7f99721 | 396 | |
| bogdanm | 85:024bf7f99721 | 397 | /** @defgroup UART_WakeUp_Methods UART WakeUp Methods |
| bogdanm | 85:024bf7f99721 | 398 | * @{ |
| bogdanm | 85:024bf7f99721 | 399 | */ |
| bogdanm | 85:024bf7f99721 | 400 | #define UART_WAKEUPMETHOD_IDLELINE ((uint32_t)0x00000000) |
| bogdanm | 85:024bf7f99721 | 401 | #define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)USART_CR1_WAKE) |
| bogdanm | 85:024bf7f99721 | 402 | #define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \ |
| bogdanm | 85:024bf7f99721 | 403 | ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK)) |
| bogdanm | 85:024bf7f99721 | 404 | /** |
| bogdanm | 85:024bf7f99721 | 405 | * @} |
| bogdanm | 85:024bf7f99721 | 406 | */ |
| bogdanm | 85:024bf7f99721 | 407 | |
| bogdanm | 92:4fc01daae5a5 | 408 | /** @defgroup UART_IT UART IT |
| bogdanm | 92:4fc01daae5a5 | 409 | * Elements values convention: 000000000XXYYYYYb |
| bogdanm | 85:024bf7f99721 | 410 | * - YYYYY : Interrupt source position in the XX register (5bits) |
| bogdanm | 85:024bf7f99721 | 411 | * - XX : Interrupt source register (2bits) |
| bogdanm | 85:024bf7f99721 | 412 | * - 01: CR1 register |
| bogdanm | 85:024bf7f99721 | 413 | * - 10: CR2 register |
| bogdanm | 85:024bf7f99721 | 414 | * - 11: CR3 register |
| bogdanm | 92:4fc01daae5a5 | 415 | * @{ |
| bogdanm | 85:024bf7f99721 | 416 | */ |
| bogdanm | 85:024bf7f99721 | 417 | #define UART_IT_ERR ((uint16_t)0x0060) |
| bogdanm | 85:024bf7f99721 | 418 | |
| bogdanm | 85:024bf7f99721 | 419 | /** Elements values convention: 0000ZZZZ00000000b |
| bogdanm | 85:024bf7f99721 | 420 | * - ZZZZ : Flag position in the ISR register(4bits) |
| bogdanm | 85:024bf7f99721 | 421 | */ |
| bogdanm | 85:024bf7f99721 | 422 | #define UART_IT_ORE ((uint16_t)0x0300) |
| bogdanm | 85:024bf7f99721 | 423 | #define UART_IT_NE ((uint16_t)0x0200) |
| bogdanm | 85:024bf7f99721 | 424 | #define UART_IT_FE ((uint16_t)0x0100) |
| bogdanm | 92:4fc01daae5a5 | 425 | /** |
| bogdanm | 92:4fc01daae5a5 | 426 | * @} |
| bogdanm | 92:4fc01daae5a5 | 427 | */ |
| bogdanm | 85:024bf7f99721 | 428 | |
| bogdanm | 85:024bf7f99721 | 429 | /** @defgroup UART_Advanced_Features_Initialization_Type UART Advanced Feature Initialization Type |
| bogdanm | 85:024bf7f99721 | 430 | * @{ |
| bogdanm | 85:024bf7f99721 | 431 | */ |
| bogdanm | 85:024bf7f99721 | 432 | #define UART_ADVFEATURE_NO_INIT ((uint32_t)0x00000000) |
| bogdanm | 85:024bf7f99721 | 433 | #define UART_ADVFEATURE_TXINVERT_INIT ((uint32_t)0x00000001) |
| bogdanm | 85:024bf7f99721 | 434 | #define UART_ADVFEATURE_RXINVERT_INIT ((uint32_t)0x00000002) |
| bogdanm | 85:024bf7f99721 | 435 | #define UART_ADVFEATURE_DATAINVERT_INIT ((uint32_t)0x00000004) |
| bogdanm | 85:024bf7f99721 | 436 | #define UART_ADVFEATURE_SWAP_INIT ((uint32_t)0x00000008) |
| bogdanm | 85:024bf7f99721 | 437 | #define UART_ADVFEATURE_RXOVERRUNDISABLE_INIT ((uint32_t)0x00000010) |
| bogdanm | 85:024bf7f99721 | 438 | #define UART_ADVFEATURE_DMADISABLEONERROR_INIT ((uint32_t)0x00000020) |
| bogdanm | 85:024bf7f99721 | 439 | #define UART_ADVFEATURE_AUTOBAUDRATE_INIT ((uint32_t)0x00000040) |
| bogdanm | 85:024bf7f99721 | 440 | #define UART_ADVFEATURE_MSBFIRST_INIT ((uint32_t)0x00000080) |
| bogdanm | 85:024bf7f99721 | 441 | #define IS_UART_ADVFEATURE_INIT(INIT) ((INIT) <= (UART_ADVFEATURE_NO_INIT | \ |
| bogdanm | 85:024bf7f99721 | 442 | UART_ADVFEATURE_TXINVERT_INIT | \ |
| bogdanm | 85:024bf7f99721 | 443 | UART_ADVFEATURE_RXINVERT_INIT | \ |
| bogdanm | 85:024bf7f99721 | 444 | UART_ADVFEATURE_DATAINVERT_INIT | \ |
| bogdanm | 85:024bf7f99721 | 445 | UART_ADVFEATURE_SWAP_INIT | \ |
| bogdanm | 85:024bf7f99721 | 446 | UART_ADVFEATURE_RXOVERRUNDISABLE_INIT | \ |
| bogdanm | 85:024bf7f99721 | 447 | UART_ADVFEATURE_DMADISABLEONERROR_INIT | \ |
| bogdanm | 85:024bf7f99721 | 448 | UART_ADVFEATURE_AUTOBAUDRATE_INIT | \ |
| bogdanm | 85:024bf7f99721 | 449 | UART_ADVFEATURE_MSBFIRST_INIT)) |
| bogdanm | 85:024bf7f99721 | 450 | /** |
| bogdanm | 85:024bf7f99721 | 451 | * @} |
| bogdanm | 85:024bf7f99721 | 452 | */ |
| bogdanm | 85:024bf7f99721 | 453 | |
| bogdanm | 85:024bf7f99721 | 454 | /** @defgroup UART_Tx_Inv UART Advanced Feature TX Pin Active Level Inversion |
| bogdanm | 85:024bf7f99721 | 455 | * @{ |
| bogdanm | 85:024bf7f99721 | 456 | */ |
| bogdanm | 85:024bf7f99721 | 457 | #define UART_ADVFEATURE_TXINV_DISABLE ((uint32_t)0x00000000) |
| bogdanm | 85:024bf7f99721 | 458 | #define UART_ADVFEATURE_TXINV_ENABLE ((uint32_t)USART_CR2_TXINV) |
| bogdanm | 85:024bf7f99721 | 459 | #define IS_UART_ADVFEATURE_TXINV(TXINV) (((TXINV) == UART_ADVFEATURE_TXINV_DISABLE) || \ |
| bogdanm | 85:024bf7f99721 | 460 | ((TXINV) == UART_ADVFEATURE_TXINV_ENABLE)) |
| bogdanm | 85:024bf7f99721 | 461 | /** |
| bogdanm | 85:024bf7f99721 | 462 | * @} |
| bogdanm | 85:024bf7f99721 | 463 | */ |
| bogdanm | 85:024bf7f99721 | 464 | |
| bogdanm | 85:024bf7f99721 | 465 | /** @defgroup UART_Rx_Inv UART Advanced Feature RX Pin Active Level Inversion |
| bogdanm | 85:024bf7f99721 | 466 | * @{ |
| bogdanm | 85:024bf7f99721 | 467 | */ |
| bogdanm | 85:024bf7f99721 | 468 | #define UART_ADVFEATURE_RXINV_DISABLE ((uint32_t)0x00000000) |
| bogdanm | 85:024bf7f99721 | 469 | #define UART_ADVFEATURE_RXINV_ENABLE ((uint32_t)USART_CR2_RXINV) |
| bogdanm | 85:024bf7f99721 | 470 | #define IS_UART_ADVFEATURE_RXINV(RXINV) (((RXINV) == UART_ADVFEATURE_RXINV_DISABLE) || \ |
| bogdanm | 85:024bf7f99721 | 471 | ((RXINV) == UART_ADVFEATURE_RXINV_ENABLE)) |
| bogdanm | 85:024bf7f99721 | 472 | /** |
| bogdanm | 85:024bf7f99721 | 473 | * @} |
| bogdanm | 85:024bf7f99721 | 474 | */ |
| bogdanm | 85:024bf7f99721 | 475 | |
| bogdanm | 85:024bf7f99721 | 476 | /** @defgroup UART_Data_Inv UART Advanced Feature Binary Data Inversion |
| bogdanm | 85:024bf7f99721 | 477 | * @{ |
| bogdanm | 85:024bf7f99721 | 478 | */ |
| bogdanm | 85:024bf7f99721 | 479 | #define UART_ADVFEATURE_DATAINV_DISABLE ((uint32_t)0x00000000) |
| bogdanm | 85:024bf7f99721 | 480 | #define UART_ADVFEATURE_DATAINV_ENABLE ((uint32_t)USART_CR2_DATAINV) |
| bogdanm | 85:024bf7f99721 | 481 | #define IS_UART_ADVFEATURE_DATAINV(DATAINV) (((DATAINV) == UART_ADVFEATURE_DATAINV_DISABLE) || \ |
| bogdanm | 85:024bf7f99721 | 482 | ((DATAINV) == UART_ADVFEATURE_DATAINV_ENABLE)) |
| bogdanm | 85:024bf7f99721 | 483 | /** |
| bogdanm | 85:024bf7f99721 | 484 | * @} |
| bogdanm | 85:024bf7f99721 | 485 | */ |
| bogdanm | 85:024bf7f99721 | 486 | |
| bogdanm | 85:024bf7f99721 | 487 | /** @defgroup UART_Rx_Tx_Swap UART Advanced Feature RX TX Pins Swap |
| bogdanm | 85:024bf7f99721 | 488 | * @{ |
| bogdanm | 85:024bf7f99721 | 489 | */ |
| bogdanm | 85:024bf7f99721 | 490 | #define UART_ADVFEATURE_SWAP_DISABLE ((uint32_t)0x00000000) |
| bogdanm | 85:024bf7f99721 | 491 | #define UART_ADVFEATURE_SWAP_ENABLE ((uint32_t)USART_CR2_SWAP) |
| bogdanm | 85:024bf7f99721 | 492 | #define IS_UART_ADVFEATURE_SWAP(SWAP) (((SWAP) == UART_ADVFEATURE_SWAP_DISABLE) || \ |
| bogdanm | 85:024bf7f99721 | 493 | ((SWAP) == UART_ADVFEATURE_SWAP_ENABLE)) |
| bogdanm | 85:024bf7f99721 | 494 | /** |
| bogdanm | 85:024bf7f99721 | 495 | * @} |
| bogdanm | 85:024bf7f99721 | 496 | */ |
| bogdanm | 85:024bf7f99721 | 497 | |
| bogdanm | 85:024bf7f99721 | 498 | /** @defgroup UART_Overrun_Disable UART Advanced Feature Overrun Disable |
| bogdanm | 85:024bf7f99721 | 499 | * @{ |
| bogdanm | 85:024bf7f99721 | 500 | */ |
| bogdanm | 85:024bf7f99721 | 501 | #define UART_ADVFEATURE_OVERRUN_ENABLE ((uint32_t)0x00000000) |
| bogdanm | 85:024bf7f99721 | 502 | #define UART_ADVFEATURE_OVERRUN_DISABLE ((uint32_t)USART_CR3_OVRDIS) |
| bogdanm | 85:024bf7f99721 | 503 | #define IS_UART_OVERRUN(OVERRUN) (((OVERRUN) == UART_ADVFEATURE_OVERRUN_ENABLE) || \ |
| bogdanm | 85:024bf7f99721 | 504 | ((OVERRUN) == UART_ADVFEATURE_OVERRUN_DISABLE)) |
| bogdanm | 85:024bf7f99721 | 505 | /** |
| bogdanm | 85:024bf7f99721 | 506 | * @} |
| bogdanm | 85:024bf7f99721 | 507 | */ |
| bogdanm | 85:024bf7f99721 | 508 | |
| bogdanm | 85:024bf7f99721 | 509 | /** @defgroup UART_AutoBaudRate_Enable UART Advanced Feature Auto BaudRate Enable |
| bogdanm | 85:024bf7f99721 | 510 | * @{ |
| bogdanm | 85:024bf7f99721 | 511 | */ |
| bogdanm | 85:024bf7f99721 | 512 | #define UART_ADVFEATURE_AUTOBAUDRATE_DISABLE ((uint32_t)0x00000000) |
| bogdanm | 85:024bf7f99721 | 513 | #define UART_ADVFEATURE_AUTOBAUDRATE_ENABLE ((uint32_t)USART_CR2_ABREN) |
| bogdanm | 85:024bf7f99721 | 514 | #define IS_UART_ADVFEATURE_AUTOBAUDRATE(AUTOBAUDRATE) (((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_DISABLE) || \ |
| bogdanm | 85:024bf7f99721 | 515 | ((AUTOBAUDRATE) == UART_ADVFEATURE_AUTOBAUDRATE_ENABLE)) |
| bogdanm | 85:024bf7f99721 | 516 | /** |
| bogdanm | 85:024bf7f99721 | 517 | * @} |
| bogdanm | 85:024bf7f99721 | 518 | */ |
| bogdanm | 85:024bf7f99721 | 519 | |
| bogdanm | 85:024bf7f99721 | 520 | /** @defgroup UART_DMA_Disable_on_Rx_Error UART Advanced Feature DMA Disable On Rx Error |
| bogdanm | 85:024bf7f99721 | 521 | * @{ |
| bogdanm | 85:024bf7f99721 | 522 | */ |
| bogdanm | 85:024bf7f99721 | 523 | #define UART_ADVFEATURE_DMA_ENABLEONRXERROR ((uint32_t)0x00000000) |
| bogdanm | 85:024bf7f99721 | 524 | #define UART_ADVFEATURE_DMA_DISABLEONRXERROR ((uint32_t)USART_CR3_DDRE) |
| bogdanm | 85:024bf7f99721 | 525 | #define IS_UART_ADVFEATURE_DMAONRXERROR(DMA) (((DMA) == UART_ADVFEATURE_DMA_ENABLEONRXERROR) || \ |
| bogdanm | 85:024bf7f99721 | 526 | ((DMA) == UART_ADVFEATURE_DMA_DISABLEONRXERROR)) |
| bogdanm | 85:024bf7f99721 | 527 | /** |
| bogdanm | 85:024bf7f99721 | 528 | * @} |
| bogdanm | 85:024bf7f99721 | 529 | */ |
| bogdanm | 85:024bf7f99721 | 530 | |
| bogdanm | 85:024bf7f99721 | 531 | /** @defgroup UART_MSB_First UART Advanced Feature MSB First |
| bogdanm | 85:024bf7f99721 | 532 | * @{ |
| bogdanm | 85:024bf7f99721 | 533 | */ |
| bogdanm | 85:024bf7f99721 | 534 | #define UART_ADVFEATURE_MSBFIRST_DISABLE ((uint32_t)0x00000000) |
| bogdanm | 85:024bf7f99721 | 535 | #define UART_ADVFEATURE_MSBFIRST_ENABLE ((uint32_t)USART_CR2_MSBFIRST) |
| bogdanm | 85:024bf7f99721 | 536 | #define IS_UART_ADVFEATURE_MSBFIRST(MSBFIRST) (((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_DISABLE) || \ |
| bogdanm | 85:024bf7f99721 | 537 | ((MSBFIRST) == UART_ADVFEATURE_MSBFIRST_ENABLE)) |
| bogdanm | 85:024bf7f99721 | 538 | /** |
| bogdanm | 85:024bf7f99721 | 539 | * @} |
| bogdanm | 85:024bf7f99721 | 540 | */ |
| bogdanm | 85:024bf7f99721 | 541 | |
| bogdanm | 85:024bf7f99721 | 542 | /** @defgroup UART_Mute_Mode UART Advanced Feature Mute Mode Enable |
| bogdanm | 85:024bf7f99721 | 543 | * @{ |
| bogdanm | 85:024bf7f99721 | 544 | */ |
| bogdanm | 85:024bf7f99721 | 545 | #define UART_ADVFEATURE_MUTEMODE_DISABLE ((uint32_t)0x00000000) |
| bogdanm | 85:024bf7f99721 | 546 | #define UART_ADVFEATURE_MUTEMODE_ENABLE ((uint32_t)USART_CR1_MME) |
| bogdanm | 85:024bf7f99721 | 547 | #define IS_UART_MUTE_MODE(MUTE) (((MUTE) == UART_ADVFEATURE_MUTEMODE_DISABLE) || \ |
| bogdanm | 85:024bf7f99721 | 548 | ((MUTE) == UART_ADVFEATURE_MUTEMODE_ENABLE)) |
| bogdanm | 85:024bf7f99721 | 549 | /** |
| bogdanm | 85:024bf7f99721 | 550 | * @} |
| bogdanm | 85:024bf7f99721 | 551 | */ |
| bogdanm | 85:024bf7f99721 | 552 | |
| bogdanm | 85:024bf7f99721 | 553 | /** @defgroup UART_CR2_ADDRESS_LSB_POS UART Address-matching LSB Position In CR2 Register |
| bogdanm | 85:024bf7f99721 | 554 | * @{ |
| bogdanm | 85:024bf7f99721 | 555 | */ |
| bogdanm | 85:024bf7f99721 | 556 | #define UART_CR2_ADDRESS_LSB_POS ((uint32_t) 24) |
| bogdanm | 85:024bf7f99721 | 557 | /** |
| bogdanm | 85:024bf7f99721 | 558 | * @} |
| bogdanm | 85:024bf7f99721 | 559 | */ |
| bogdanm | 85:024bf7f99721 | 560 | |
| bogdanm | 85:024bf7f99721 | 561 | /** @defgroup UART_DriverEnable_Polarity UART DriverEnable Polarity |
| bogdanm | 85:024bf7f99721 | 562 | * @{ |
| bogdanm | 85:024bf7f99721 | 563 | */ |
| bogdanm | 85:024bf7f99721 | 564 | #define UART_DE_POLARITY_HIGH ((uint32_t)0x00000000) |
| bogdanm | 85:024bf7f99721 | 565 | #define UART_DE_POLARITY_LOW ((uint32_t)USART_CR3_DEP) |
| bogdanm | 85:024bf7f99721 | 566 | #define IS_UART_DE_POLARITY(POLARITY) (((POLARITY) == UART_DE_POLARITY_HIGH) || \ |
| bogdanm | 85:024bf7f99721 | 567 | ((POLARITY) == UART_DE_POLARITY_LOW)) |
| bogdanm | 85:024bf7f99721 | 568 | /** |
| bogdanm | 85:024bf7f99721 | 569 | * @} |
| bogdanm | 85:024bf7f99721 | 570 | */ |
| bogdanm | 85:024bf7f99721 | 571 | |
| bogdanm | 85:024bf7f99721 | 572 | /** @defgroup UART_CR1_DEAT_ADDRESS_LSB_POS UART Driver Enable Assertion Time LSB Position In CR1 Register |
| bogdanm | 85:024bf7f99721 | 573 | * @{ |
| bogdanm | 85:024bf7f99721 | 574 | */ |
| bogdanm | 85:024bf7f99721 | 575 | #define UART_CR1_DEAT_ADDRESS_LSB_POS ((uint32_t) 21) |
| bogdanm | 85:024bf7f99721 | 576 | /** |
| bogdanm | 85:024bf7f99721 | 577 | * @} |
| bogdanm | 85:024bf7f99721 | 578 | */ |
| bogdanm | 85:024bf7f99721 | 579 | |
| bogdanm | 85:024bf7f99721 | 580 | /** @defgroup UART_CR1_DEDT_ADDRESS_LSB_POS UART Driver Enable DeAssertion Time LSB Position In CR1 Register |
| bogdanm | 85:024bf7f99721 | 581 | * @{ |
| bogdanm | 85:024bf7f99721 | 582 | */ |
| bogdanm | 85:024bf7f99721 | 583 | #define UART_CR1_DEDT_ADDRESS_LSB_POS ((uint32_t) 16) |
| bogdanm | 85:024bf7f99721 | 584 | /** |
| bogdanm | 85:024bf7f99721 | 585 | * @} |
| bogdanm | 85:024bf7f99721 | 586 | */ |
| bogdanm | 85:024bf7f99721 | 587 | |
| bogdanm | 85:024bf7f99721 | 588 | /** @defgroup UART_Interruption_Mask UART Interruptions Flag Mask |
| bogdanm | 85:024bf7f99721 | 589 | * @{ |
| bogdanm | 85:024bf7f99721 | 590 | */ |
| bogdanm | 85:024bf7f99721 | 591 | #define UART_IT_MASK ((uint32_t)0x001F) |
| bogdanm | 85:024bf7f99721 | 592 | /** |
| bogdanm | 85:024bf7f99721 | 593 | * @} |
| bogdanm | 85:024bf7f99721 | 594 | */ |
| bogdanm | 85:024bf7f99721 | 595 | |
| bogdanm | 85:024bf7f99721 | 596 | /** @defgroup UART_TimeOut_Value UART polling-based communications time-out value |
| bogdanm | 85:024bf7f99721 | 597 | * @{ |
| bogdanm | 85:024bf7f99721 | 598 | */ |
| bogdanm | 85:024bf7f99721 | 599 | #define HAL_UART_TIMEOUT_VALUE 0x1FFFFFF |
| bogdanm | 85:024bf7f99721 | 600 | /** |
| bogdanm | 85:024bf7f99721 | 601 | * @} |
| bogdanm | 85:024bf7f99721 | 602 | */ |
| bogdanm | 85:024bf7f99721 | 603 | |
| bogdanm | 85:024bf7f99721 | 604 | /** |
| bogdanm | 85:024bf7f99721 | 605 | * @} |
| bogdanm | 85:024bf7f99721 | 606 | */ |
| bogdanm | 85:024bf7f99721 | 607 | |
| bogdanm | 92:4fc01daae5a5 | 608 | /* Exported macro ------------------------------------------------------------*/ |
| bogdanm | 92:4fc01daae5a5 | 609 | /** @defgroup UART_Exported_Macros UART Exported Macros |
| bogdanm | 85:024bf7f99721 | 610 | * @{ |
| bogdanm | 85:024bf7f99721 | 611 | */ |
| bogdanm | 85:024bf7f99721 | 612 | |
| bogdanm | 85:024bf7f99721 | 613 | /** @brief Reset UART handle state |
| bogdanm | 85:024bf7f99721 | 614 | * @param __HANDLE__: UART handle. |
| bogdanm | 85:024bf7f99721 | 615 | * @retval None |
| bogdanm | 85:024bf7f99721 | 616 | */ |
| bogdanm | 85:024bf7f99721 | 617 | #define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET) |
| bogdanm | 85:024bf7f99721 | 618 | |
| bogdanm | 85:024bf7f99721 | 619 | /** @brief Checks whether the specified UART flag is set or not. |
| bogdanm | 85:024bf7f99721 | 620 | * @param __HANDLE__: specifies the UART Handle. |
| bogdanm | 85:024bf7f99721 | 621 | * This parameter can be UARTx where x: 1, 2, 3 or 4 to select the USART or |
| bogdanm | 85:024bf7f99721 | 622 | * UART peripheral (datasheet: up to four USART/UARTs) |
| bogdanm | 85:024bf7f99721 | 623 | * @param __FLAG__: specifies the flag to check. |
| bogdanm | 85:024bf7f99721 | 624 | * This parameter can be one of the following values: |
| bogdanm | 85:024bf7f99721 | 625 | * @arg UART_FLAG_REACK: Receive enable ackowledge flag |
| bogdanm | 85:024bf7f99721 | 626 | * @arg UART_FLAG_TEACK: Transmit enable ackowledge flag |
| bogdanm | 85:024bf7f99721 | 627 | * @arg UART_FLAG_WUF: Wake up from stop mode flag (not available on F030xx devices) |
| bogdanm | 85:024bf7f99721 | 628 | * @arg UART_FLAG_RWU: Receiver wake up flag (not available on F030xx devices) |
| bogdanm | 85:024bf7f99721 | 629 | * @arg UART_FLAG_SBKF: Send Break flag |
| bogdanm | 85:024bf7f99721 | 630 | * @arg UART_FLAG_CMF: Character match flag |
| bogdanm | 85:024bf7f99721 | 631 | * @arg UART_FLAG_BUSY: Busy flag |
| bogdanm | 85:024bf7f99721 | 632 | * @arg UART_FLAG_ABRF: Auto Baud rate detection flag |
| bogdanm | 85:024bf7f99721 | 633 | * @arg UART_FLAG_ABRE: Auto Baud rate detection error flag |
| bogdanm | 85:024bf7f99721 | 634 | * @arg UART_FLAG_EOBF: End of block flag (not available on F030xx devices) |
| bogdanm | 85:024bf7f99721 | 635 | * @arg UART_FLAG_RTOF: Receiver timeout flag |
| bogdanm | 85:024bf7f99721 | 636 | * @arg UART_FLAG_CTS: CTS Change flag |
| bogdanm | 85:024bf7f99721 | 637 | * @arg UART_FLAG_LBD: LIN Break detection flag (not available on F030xx devices) |
| bogdanm | 85:024bf7f99721 | 638 | * @arg UART_FLAG_TXE: Transmit data register empty flag |
| bogdanm | 85:024bf7f99721 | 639 | * @arg UART_FLAG_TC: Transmission Complete flag |
| bogdanm | 85:024bf7f99721 | 640 | * @arg UART_FLAG_RXNE: Receive data register not empty flag |
| bogdanm | 85:024bf7f99721 | 641 | * @arg UART_FLAG_IDLE: Idle Line detection flag |
| bogdanm | 85:024bf7f99721 | 642 | * @arg UART_FLAG_ORE: OverRun Error flag |
| bogdanm | 85:024bf7f99721 | 643 | * @arg UART_FLAG_NE: Noise Error flag |
| bogdanm | 85:024bf7f99721 | 644 | * @arg UART_FLAG_FE: Framing Error flag |
| bogdanm | 85:024bf7f99721 | 645 | * @arg UART_FLAG_PE: Parity Error flag |
| bogdanm | 85:024bf7f99721 | 646 | * @retval The new state of __FLAG__ (TRUE or FALSE). |
| bogdanm | 85:024bf7f99721 | 647 | */ |
| bogdanm | 85:024bf7f99721 | 648 | #define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->ISR & (__FLAG__)) == (__FLAG__)) |
| bogdanm | 85:024bf7f99721 | 649 | |
| bogdanm | 85:024bf7f99721 | 650 | /** @brief Enables the specified UART interrupt. |
| bogdanm | 85:024bf7f99721 | 651 | * @param __HANDLE__: specifies the UART Handle. |
| bogdanm | 85:024bf7f99721 | 652 | * This parameter can be UARTx where x: 1, 2, 3 or 4 to select the USART or |
| bogdanm | 85:024bf7f99721 | 653 | * UART peripheral. (datasheet: up to four USART/UARTs) |
| bogdanm | 85:024bf7f99721 | 654 | * @param __INTERRUPT__: specifies the UART interrupt source to enable. |
| bogdanm | 85:024bf7f99721 | 655 | * This parameter can be one of the following values: |
| bogdanm | 85:024bf7f99721 | 656 | * @arg UART_IT_WUF: Wakeup from stop mode interrupt (not available on F030xx devices) |
| bogdanm | 85:024bf7f99721 | 657 | * @arg UART_IT_CM: Character match interrupt |
| bogdanm | 85:024bf7f99721 | 658 | * @arg UART_IT_CTS: CTS change interrupt |
| bogdanm | 85:024bf7f99721 | 659 | * @arg UART_IT_LBD: LIN Break detection interrupt (not available on F030xx devices) |
| bogdanm | 85:024bf7f99721 | 660 | * @arg UART_IT_TXE: Transmit Data Register empty interrupt |
| bogdanm | 85:024bf7f99721 | 661 | * @arg UART_IT_TC: Transmission complete interrupt |
| bogdanm | 85:024bf7f99721 | 662 | * @arg UART_IT_RXNE: Receive Data register not empty interrupt |
| bogdanm | 85:024bf7f99721 | 663 | * @arg UART_IT_IDLE: Idle line detection interrupt |
| bogdanm | 85:024bf7f99721 | 664 | * @arg UART_IT_PE: Parity Error interrupt |
| bogdanm | 85:024bf7f99721 | 665 | * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) |
| bogdanm | 85:024bf7f99721 | 666 | * @retval None |
| bogdanm | 85:024bf7f99721 | 667 | */ |
| bogdanm | 85:024bf7f99721 | 668 | #define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \ |
| bogdanm | 85:024bf7f99721 | 669 | ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 |= (1U << ((__INTERRUPT__) & UART_IT_MASK))): \ |
| bogdanm | 85:024bf7f99721 | 670 | ((__HANDLE__)->Instance->CR3 |= (1U << ((__INTERRUPT__) & UART_IT_MASK)))) |
| bogdanm | 85:024bf7f99721 | 671 | |
| bogdanm | 85:024bf7f99721 | 672 | |
| bogdanm | 85:024bf7f99721 | 673 | /** @brief Disables the specified UART interrupt. |
| bogdanm | 85:024bf7f99721 | 674 | * @param __HANDLE__: specifies the UART Handle. |
| bogdanm | 85:024bf7f99721 | 675 | * This parameter can be UARTx where x: 1, 2, 3 or 4 to select the USART or |
| bogdanm | 85:024bf7f99721 | 676 | * UART peripheral. (datasheet: up to four USART/UARTs) |
| bogdanm | 85:024bf7f99721 | 677 | * @param __INTERRUPT__: specifies the UART interrupt source to disable. |
| bogdanm | 85:024bf7f99721 | 678 | * This parameter can be one of the following values: |
| bogdanm | 85:024bf7f99721 | 679 | * @arg UART_IT_WUF: Wakeup from stop mode interrupt (not available on F030xx devices) |
| bogdanm | 85:024bf7f99721 | 680 | * @arg UART_IT_CM: Character match interrupt |
| bogdanm | 85:024bf7f99721 | 681 | * @arg UART_IT_CTS: CTS change interrupt |
| bogdanm | 85:024bf7f99721 | 682 | * @arg UART_IT_LBD: LIN Break detection interrupt (not available on F030xx devices) |
| bogdanm | 85:024bf7f99721 | 683 | * @arg UART_IT_TXE: Transmit Data Register empty interrupt |
| bogdanm | 85:024bf7f99721 | 684 | * @arg UART_IT_TC: Transmission complete interrupt |
| bogdanm | 85:024bf7f99721 | 685 | * @arg UART_IT_RXNE: Receive Data register not empty interrupt |
| bogdanm | 85:024bf7f99721 | 686 | * @arg UART_IT_IDLE: Idle line detection interrupt |
| bogdanm | 85:024bf7f99721 | 687 | * @arg UART_IT_PE: Parity Error interrupt |
| bogdanm | 85:024bf7f99721 | 688 | * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) |
| bogdanm | 85:024bf7f99721 | 689 | * @retval None |
| bogdanm | 85:024bf7f99721 | 690 | */ |
| bogdanm | 85:024bf7f99721 | 691 | #define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((((uint8_t)(__INTERRUPT__)) >> 5U) == 1)? ((__HANDLE__)->Instance->CR1 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \ |
| bogdanm | 85:024bf7f99721 | 692 | ((((uint8_t)(__INTERRUPT__)) >> 5U) == 2)? ((__HANDLE__)->Instance->CR2 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK))): \ |
| bogdanm | 85:024bf7f99721 | 693 | ((__HANDLE__)->Instance->CR3 &= ~ (1U << ((__INTERRUPT__) & UART_IT_MASK)))) |
| bogdanm | 85:024bf7f99721 | 694 | |
| bogdanm | 85:024bf7f99721 | 695 | /** @brief Checks whether the specified UART interrupt has occurred or not. |
| bogdanm | 85:024bf7f99721 | 696 | * @param __HANDLE__: specifies the UART Handle. |
| bogdanm | 85:024bf7f99721 | 697 | * This parameter can be UARTx where x: 1, 2, 3 or 4 to select the USART or |
| bogdanm | 85:024bf7f99721 | 698 | * UART peripheral. (datasheet: up to four USART/UARTs) |
| bogdanm | 85:024bf7f99721 | 699 | * @param __IT__: specifies the UART interrupt to check. |
| bogdanm | 85:024bf7f99721 | 700 | * This parameter can be one of the following values: |
| bogdanm | 85:024bf7f99721 | 701 | * @arg UART_IT_WUF: Wakeup from stop mode interrupt (not available on F030xx devices) |
| bogdanm | 85:024bf7f99721 | 702 | * @arg UART_IT_CM: Character match interrupt |
| bogdanm | 85:024bf7f99721 | 703 | * @arg UART_IT_CTS: CTS change interrupt |
| bogdanm | 85:024bf7f99721 | 704 | * @arg UART_IT_LBD: LIN Break detection interrupt (not available on F030xx devices) |
| bogdanm | 85:024bf7f99721 | 705 | * @arg UART_IT_TXE: Transmit Data Register empty interrupt |
| bogdanm | 85:024bf7f99721 | 706 | * @arg UART_IT_TC: Transmission complete interrupt |
| bogdanm | 85:024bf7f99721 | 707 | * @arg UART_IT_RXNE: Receive Data register not empty interrupt |
| bogdanm | 85:024bf7f99721 | 708 | * @arg UART_IT_IDLE: Idle line detection interrupt |
| bogdanm | 85:024bf7f99721 | 709 | * @arg UART_IT_ORE: OverRun Error interrupt |
| bogdanm | 85:024bf7f99721 | 710 | * @arg UART_IT_NE: Noise Error interrupt |
| bogdanm | 85:024bf7f99721 | 711 | * @arg UART_IT_FE: Framing Error interrupt |
| bogdanm | 85:024bf7f99721 | 712 | * @arg UART_IT_PE: Parity Error interrupt |
| bogdanm | 85:024bf7f99721 | 713 | * @retval The new state of __IT__ (TRUE or FALSE). |
| bogdanm | 85:024bf7f99721 | 714 | */ |
| bogdanm | 85:024bf7f99721 | 715 | #define __HAL_UART_GET_IT(__HANDLE__, __IT__) ((__HANDLE__)->Instance->ISR & ((uint32_t)1 << ((__IT__)>> 0x08))) |
| bogdanm | 85:024bf7f99721 | 716 | |
| bogdanm | 85:024bf7f99721 | 717 | /** @brief Checks whether the specified UART interrupt source is enabled. |
| bogdanm | 85:024bf7f99721 | 718 | * @param __HANDLE__: specifies the UART Handle. |
| bogdanm | 85:024bf7f99721 | 719 | * This parameter can be UARTx where x: 1, 2, 3 or 4 to select the USART or |
| bogdanm | 85:024bf7f99721 | 720 | * UART peripheral. (datasheet: up to four USART/UARTs) |
| bogdanm | 85:024bf7f99721 | 721 | * @param __IT__: specifies the UART interrupt source to check. |
| bogdanm | 85:024bf7f99721 | 722 | * This parameter can be one of the following values: |
| bogdanm | 85:024bf7f99721 | 723 | * @arg UART_IT_WUF: Wakeup from stop mode interrupt (not available on F030xx devices) |
| bogdanm | 85:024bf7f99721 | 724 | * @arg UART_IT_CM: Character match interrupt |
| bogdanm | 85:024bf7f99721 | 725 | * @arg UART_IT_CTS: CTS change interrupt |
| bogdanm | 85:024bf7f99721 | 726 | * @arg UART_IT_LBD: LIN Break detection interrupt (not available on F030xx devices) |
| bogdanm | 85:024bf7f99721 | 727 | * @arg UART_IT_TXE: Transmit Data Register empty interrupt |
| bogdanm | 85:024bf7f99721 | 728 | * @arg UART_IT_TC: Transmission complete interrupt |
| bogdanm | 85:024bf7f99721 | 729 | * @arg UART_IT_RXNE: Receive Data register not empty interrupt |
| bogdanm | 85:024bf7f99721 | 730 | * @arg UART_IT_IDLE: Idle line detection interrupt |
| bogdanm | 85:024bf7f99721 | 731 | * @arg UART_IT_ORE: OverRun Error interrupt |
| bogdanm | 85:024bf7f99721 | 732 | * @arg UART_IT_NE: Noise Error interrupt |
| bogdanm | 85:024bf7f99721 | 733 | * @arg UART_IT_FE: Framing Error interrupt |
| bogdanm | 85:024bf7f99721 | 734 | * @arg UART_IT_PE: Parity Error interrupt |
| bogdanm | 85:024bf7f99721 | 735 | * @retval The new state of __IT__ (TRUE or FALSE). |
| bogdanm | 85:024bf7f99721 | 736 | */ |
| bogdanm | 85:024bf7f99721 | 737 | #define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) ((((((uint8_t)(__IT__)) >> 5U) == 1)? (__HANDLE__)->Instance->CR1:(((((uint8_t)(__IT__)) >> 5U) == 2)? \ |
| bogdanm | 85:024bf7f99721 | 738 | (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & ((uint32_t)1 << (((uint16_t)(__IT__)) & UART_IT_MASK))) |
| bogdanm | 85:024bf7f99721 | 739 | |
| bogdanm | 85:024bf7f99721 | 740 | /** @brief Clears the specified UART ISR flag, in setting the proper ICR register flag. |
| bogdanm | 85:024bf7f99721 | 741 | * @param __HANDLE__: specifies the UART Handle. |
| bogdanm | 85:024bf7f99721 | 742 | * This parameter can be UARTx where x: 1, 2, 3 or 4 to select the USART or |
| bogdanm | 85:024bf7f99721 | 743 | * UART peripheral. (datasheet: up to four USART/UARTs) |
| bogdanm | 85:024bf7f99721 | 744 | * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set |
| bogdanm | 85:024bf7f99721 | 745 | * to clear the corresponding interrupt |
| bogdanm | 85:024bf7f99721 | 746 | * This parameter can be one of the following values: |
| bogdanm | 85:024bf7f99721 | 747 | * @arg UART_CLEAR_PEF: Parity Error Clear Flag |
| bogdanm | 85:024bf7f99721 | 748 | * @arg UART_CLEAR_FEF: Framing Error Clear Flag |
| bogdanm | 85:024bf7f99721 | 749 | * @arg UART_CLEAR_NEF: Noise detected Clear Flag |
| bogdanm | 85:024bf7f99721 | 750 | * @arg UART_CLEAR_OREF: OverRun Error Clear Flag |
| bogdanm | 85:024bf7f99721 | 751 | * @arg UART_CLEAR_IDLEF: IDLE line detected Clear Flag |
| bogdanm | 85:024bf7f99721 | 752 | * @arg UART_CLEAR_TCF: Transmission Complete Clear Flag |
| bogdanm | 85:024bf7f99721 | 753 | * @arg UART_CLEAR_LBDF: LIN Break Detection Clear Flag (not available on F030xx devices) |
| bogdanm | 85:024bf7f99721 | 754 | * @arg UART_CLEAR_CTSF: CTS Interrupt Clear Flag |
| bogdanm | 85:024bf7f99721 | 755 | * @arg UART_CLEAR_RTOF: Receiver Time Out Clear Flag |
| bogdanm | 85:024bf7f99721 | 756 | * @arg UART_CLEAR_EOBF: End Of Block Clear Flag (not available on F030xx devices) |
| bogdanm | 85:024bf7f99721 | 757 | * @arg UART_CLEAR_CMF: Character Match Clear Flag |
| bogdanm | 85:024bf7f99721 | 758 | * @arg UART_CLEAR_WUF: Wake Up from stop mode Clear Flag (not available on F030xx devices) |
| bogdanm | 85:024bf7f99721 | 759 | * @retval None |
| bogdanm | 85:024bf7f99721 | 760 | */ |
| bogdanm | 92:4fc01daae5a5 | 761 | #define __HAL_UART_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->ICR = (uint32_t)(__IT_CLEAR__)) |
| bogdanm | 85:024bf7f99721 | 762 | |
| bogdanm | 85:024bf7f99721 | 763 | /** @brief Set a specific UART request flag. |
| bogdanm | 85:024bf7f99721 | 764 | * @param __HANDLE__: specifies the UART Handle. |
| bogdanm | 85:024bf7f99721 | 765 | * This parameter can be UARTx where x: 1, 2, 3 or 4 to select the USART or |
| bogdanm | 85:024bf7f99721 | 766 | * UART peripheral. (datasheet: up to four USART/UARTs) |
| bogdanm | 85:024bf7f99721 | 767 | * @param __REQ__: specifies the request flag to set |
| bogdanm | 85:024bf7f99721 | 768 | * This parameter can be one of the following values: |
| bogdanm | 85:024bf7f99721 | 769 | * @arg UART_AUTOBAUD_REQUEST: Auto-Baud Rate Request |
| bogdanm | 85:024bf7f99721 | 770 | * @arg UART_SENDBREAK_REQUEST: Send Break Request |
| bogdanm | 85:024bf7f99721 | 771 | * @arg UART_MUTE_MODE_REQUEST: Mute Mode Request |
| bogdanm | 85:024bf7f99721 | 772 | * @arg UART_RXDATA_FLUSH_REQUEST: Receive Data flush Request |
| bogdanm | 85:024bf7f99721 | 773 | * @arg UART_TXDATA_FLUSH_REQUEST: Transmit data flush Request (not available on F030xx devices) |
| bogdanm | 85:024bf7f99721 | 774 | * @retval None |
| bogdanm | 85:024bf7f99721 | 775 | */ |
| bogdanm | 92:4fc01daae5a5 | 776 | #define __HAL_UART_SEND_REQ(__HANDLE__, __REQ__) ((__HANDLE__)->Instance->RQR |= (uint16_t)(__REQ__)) |
| bogdanm | 85:024bf7f99721 | 777 | |
| bogdanm | 85:024bf7f99721 | 778 | /** @brief Enable UART |
| bogdanm | 85:024bf7f99721 | 779 | * @param __HANDLE__: specifies the UART Handle. |
| bogdanm | 85:024bf7f99721 | 780 | * The Handle Instance can be UARTx where x: 1, 2, 3, 4 or 5 to select the UART peripheral |
| bogdanm | 85:024bf7f99721 | 781 | * @retval None |
| bogdanm | 85:024bf7f99721 | 782 | */ |
| bogdanm | 85:024bf7f99721 | 783 | #define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) |
| bogdanm | 85:024bf7f99721 | 784 | |
| bogdanm | 85:024bf7f99721 | 785 | /** @brief Disable UART |
| bogdanm | 85:024bf7f99721 | 786 | * @param __HANDLE__: specifies the UART Handle. |
| bogdanm | 85:024bf7f99721 | 787 | * The Handle Instance can be UARTx where x: 1, 2, 3, 4 or 5 to select the UART peripheral |
| bogdanm | 85:024bf7f99721 | 788 | * @retval None |
| bogdanm | 85:024bf7f99721 | 789 | */ |
| bogdanm | 85:024bf7f99721 | 790 | #define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) |
| bogdanm | 85:024bf7f99721 | 791 | |
| bogdanm | 92:4fc01daae5a5 | 792 | /** |
| bogdanm | 92:4fc01daae5a5 | 793 | * @} |
| bogdanm | 92:4fc01daae5a5 | 794 | */ |
| bogdanm | 92:4fc01daae5a5 | 795 | |
| bogdanm | 92:4fc01daae5a5 | 796 | /* Private macros --------------------------------------------------------*/ |
| bogdanm | 92:4fc01daae5a5 | 797 | /** @defgroup UART_Private_Macros UART Private Macros |
| bogdanm | 92:4fc01daae5a5 | 798 | * @{ |
| bogdanm | 92:4fc01daae5a5 | 799 | */ |
| bogdanm | 92:4fc01daae5a5 | 800 | |
| bogdanm | 85:024bf7f99721 | 801 | /** @brief BRR division operation to set BRR register in 8-bit oversampling mode |
| bogdanm | 85:024bf7f99721 | 802 | * @param _PCLK_: UART clock |
| bogdanm | 85:024bf7f99721 | 803 | * @param _BAUD_: Baud rate set by the user |
| bogdanm | 85:024bf7f99721 | 804 | * @retval Division result |
| bogdanm | 85:024bf7f99721 | 805 | */ |
| bogdanm | 85:024bf7f99721 | 806 | #define __DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*2)/((_BAUD_))) |
| bogdanm | 85:024bf7f99721 | 807 | |
| bogdanm | 85:024bf7f99721 | 808 | /** @brief BRR division operation to set BRR register in 16-bit oversampling mode |
| bogdanm | 85:024bf7f99721 | 809 | * @param _PCLK_: UART clock |
| bogdanm | 85:024bf7f99721 | 810 | * @param _BAUD_: Baud rate set by the user |
| bogdanm | 85:024bf7f99721 | 811 | * @retval Division result |
| bogdanm | 85:024bf7f99721 | 812 | */ |
| bogdanm | 85:024bf7f99721 | 813 | #define __DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_))/((_BAUD_))) |
| bogdanm | 85:024bf7f99721 | 814 | |
| bogdanm | 85:024bf7f99721 | 815 | /** @brief Check UART Baud rate |
| bogdanm | 85:024bf7f99721 | 816 | * @param BAUDRATE: Baudrate specified by the user |
| bogdanm | 85:024bf7f99721 | 817 | * The maximum Baud Rate is derived from the maximum clock on F0 (i.e. 48 MHz) |
| bogdanm | 85:024bf7f99721 | 818 | * divided by the smallest oversampling used on the USART (i.e. 8) |
| bogdanm | 85:024bf7f99721 | 819 | * @retval Test result (TRUE or FALSE). |
| bogdanm | 85:024bf7f99721 | 820 | */ |
| bogdanm | 85:024bf7f99721 | 821 | #define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 9000001) |
| bogdanm | 85:024bf7f99721 | 822 | |
| bogdanm | 85:024bf7f99721 | 823 | /** @brief Check UART assertion time |
| bogdanm | 85:024bf7f99721 | 824 | * @param TIME: 5-bit value assertion time |
| bogdanm | 85:024bf7f99721 | 825 | * @retval Test result (TRUE or FALSE). |
| bogdanm | 85:024bf7f99721 | 826 | */ |
| bogdanm | 85:024bf7f99721 | 827 | #define IS_UART_ASSERTIONTIME(TIME) ((TIME) <= 0x1F) |
| bogdanm | 85:024bf7f99721 | 828 | |
| bogdanm | 85:024bf7f99721 | 829 | /** @brief Check UART deassertion time |
| bogdanm | 85:024bf7f99721 | 830 | * @param TIME: 5-bit value deassertion time |
| bogdanm | 85:024bf7f99721 | 831 | * @retval Test result (TRUE or FALSE). |
| bogdanm | 85:024bf7f99721 | 832 | */ |
| bogdanm | 85:024bf7f99721 | 833 | #define IS_UART_DEASSERTIONTIME(TIME) ((TIME) <= 0x1F) |
| bogdanm | 85:024bf7f99721 | 834 | |
| bogdanm | 85:024bf7f99721 | 835 | /** |
| bogdanm | 85:024bf7f99721 | 836 | * @} |
| bogdanm | 85:024bf7f99721 | 837 | */ |
| bogdanm | 85:024bf7f99721 | 838 | |
| bogdanm | 85:024bf7f99721 | 839 | /* Include UART HAL Extension module */ |
| bogdanm | 85:024bf7f99721 | 840 | #include "stm32f0xx_hal_uart_ex.h" |
| bogdanm | 85:024bf7f99721 | 841 | |
| bogdanm | 85:024bf7f99721 | 842 | /* Exported functions --------------------------------------------------------*/ |
| bogdanm | 92:4fc01daae5a5 | 843 | |
| bogdanm | 92:4fc01daae5a5 | 844 | /** @addtogroup UART_Exported_Functions UART Exported Functions |
| bogdanm | 92:4fc01daae5a5 | 845 | * @{ |
| bogdanm | 92:4fc01daae5a5 | 846 | */ |
| bogdanm | 92:4fc01daae5a5 | 847 | |
| bogdanm | 92:4fc01daae5a5 | 848 | /** @addtogroup UART_Exported_Functions_Group1 Initialization and de-initialization functions |
| bogdanm | 92:4fc01daae5a5 | 849 | * @{ |
| bogdanm | 92:4fc01daae5a5 | 850 | */ |
| bogdanm | 92:4fc01daae5a5 | 851 | |
| bogdanm | 85:024bf7f99721 | 852 | /* Initialization and de-initialization functions ****************************/ |
| bogdanm | 85:024bf7f99721 | 853 | HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart); |
| bogdanm | 85:024bf7f99721 | 854 | HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart); |
| bogdanm | 85:024bf7f99721 | 855 | HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod); |
| bogdanm | 85:024bf7f99721 | 856 | HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart); |
| bogdanm | 85:024bf7f99721 | 857 | void HAL_UART_MspInit(UART_HandleTypeDef *huart); |
| bogdanm | 85:024bf7f99721 | 858 | void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); |
| bogdanm | 92:4fc01daae5a5 | 859 | |
| bogdanm | 92:4fc01daae5a5 | 860 | /** |
| bogdanm | 92:4fc01daae5a5 | 861 | * @} |
| bogdanm | 92:4fc01daae5a5 | 862 | */ |
| bogdanm | 92:4fc01daae5a5 | 863 | |
| bogdanm | 92:4fc01daae5a5 | 864 | /** @addtogroup UART_Exported_Functions_Group2 IO operation functions |
| bogdanm | 92:4fc01daae5a5 | 865 | * @{ |
| bogdanm | 92:4fc01daae5a5 | 866 | */ |
| bogdanm | 85:024bf7f99721 | 867 | |
| bogdanm | 85:024bf7f99721 | 868 | /* IO operation functions *****************************************************/ |
| bogdanm | 85:024bf7f99721 | 869 | HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); |
| bogdanm | 85:024bf7f99721 | 870 | HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); |
| bogdanm | 85:024bf7f99721 | 871 | HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); |
| bogdanm | 85:024bf7f99721 | 872 | HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); |
| bogdanm | 85:024bf7f99721 | 873 | HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); |
| bogdanm | 85:024bf7f99721 | 874 | HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); |
| bogdanm | 85:024bf7f99721 | 875 | HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); |
| bogdanm | 85:024bf7f99721 | 876 | HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); |
| bogdanm | 85:024bf7f99721 | 877 | HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart); |
| bogdanm | 92:4fc01daae5a5 | 878 | void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart); |
| bogdanm | 85:024bf7f99721 | 879 | void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart); |
| bogdanm | 85:024bf7f99721 | 880 | void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart); |
| bogdanm | 92:4fc01daae5a5 | 881 | void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart); |
| bogdanm | 85:024bf7f99721 | 882 | void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart); |
| bogdanm | 92:4fc01daae5a5 | 883 | |
| bogdanm | 92:4fc01daae5a5 | 884 | /** |
| bogdanm | 92:4fc01daae5a5 | 885 | * @} |
| bogdanm | 92:4fc01daae5a5 | 886 | */ |
| bogdanm | 92:4fc01daae5a5 | 887 | |
| bogdanm | 92:4fc01daae5a5 | 888 | /** @addtogroup UART_Exported_Functions_Group3 Peripheral Control functions |
| bogdanm | 92:4fc01daae5a5 | 889 | * @{ |
| bogdanm | 92:4fc01daae5a5 | 890 | */ |
| bogdanm | 85:024bf7f99721 | 891 | |
| bogdanm | 85:024bf7f99721 | 892 | /* Peripheral Control functions ***********************************************/ |
| bogdanm | 92:4fc01daae5a5 | 893 | void HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart); |
| bogdanm | 92:4fc01daae5a5 | 894 | HAL_StatusTypeDef HAL_MultiProcessor_EnableMuteMode(UART_HandleTypeDef *huart); |
| bogdanm | 92:4fc01daae5a5 | 895 | HAL_StatusTypeDef HAL_MultiProcessor_DisableMuteMode(UART_HandleTypeDef *huart); |
| bogdanm | 92:4fc01daae5a5 | 896 | HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart); |
| bogdanm | 92:4fc01daae5a5 | 897 | HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); |
| bogdanm | 85:024bf7f99721 | 898 | |
| bogdanm | 92:4fc01daae5a5 | 899 | /** |
| bogdanm | 92:4fc01daae5a5 | 900 | * @} |
| bogdanm | 92:4fc01daae5a5 | 901 | */ |
| bogdanm | 92:4fc01daae5a5 | 902 | |
| bogdanm | 92:4fc01daae5a5 | 903 | /** @addtogroup UART_Exported_Functions_Group4 Peripheral State and Errors functions |
| bogdanm | 92:4fc01daae5a5 | 904 | * @{ |
| bogdanm | 92:4fc01daae5a5 | 905 | */ |
| bogdanm | 92:4fc01daae5a5 | 906 | |
| bogdanm | 92:4fc01daae5a5 | 907 | /* Peripheral State and Errors functions **************************************************/ |
| bogdanm | 85:024bf7f99721 | 908 | HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart); |
| bogdanm | 85:024bf7f99721 | 909 | uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart); |
| bogdanm | 85:024bf7f99721 | 910 | |
| bogdanm | 85:024bf7f99721 | 911 | /** |
| bogdanm | 85:024bf7f99721 | 912 | * @} |
| bogdanm | 85:024bf7f99721 | 913 | */ |
| bogdanm | 85:024bf7f99721 | 914 | |
| bogdanm | 85:024bf7f99721 | 915 | /** |
| bogdanm | 85:024bf7f99721 | 916 | * @} |
| bogdanm | 85:024bf7f99721 | 917 | */ |
| bogdanm | 85:024bf7f99721 | 918 | |
| bogdanm | 92:4fc01daae5a5 | 919 | /** @addtogroup UART_Private_Functions |
| bogdanm | 92:4fc01daae5a5 | 920 | * @{ |
| bogdanm | 92:4fc01daae5a5 | 921 | */ |
| bogdanm | 92:4fc01daae5a5 | 922 | void UART_AdvFeatureConfig(UART_HandleTypeDef *huart); |
| bogdanm | 92:4fc01daae5a5 | 923 | HAL_StatusTypeDef UART_CheckIdleState(UART_HandleTypeDef *huart); |
| bogdanm | 92:4fc01daae5a5 | 924 | HAL_StatusTypeDef UART_SetConfig(UART_HandleTypeDef *huart); |
| bogdanm | 92:4fc01daae5a5 | 925 | HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart); |
| bogdanm | 92:4fc01daae5a5 | 926 | HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart); |
| bogdanm | 92:4fc01daae5a5 | 927 | HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout); |
| bogdanm | 92:4fc01daae5a5 | 928 | /** |
| bogdanm | 92:4fc01daae5a5 | 929 | * @} |
| bogdanm | 92:4fc01daae5a5 | 930 | */ |
| bogdanm | 92:4fc01daae5a5 | 931 | |
| bogdanm | 92:4fc01daae5a5 | 932 | /** |
| bogdanm | 92:4fc01daae5a5 | 933 | * @} |
| bogdanm | 92:4fc01daae5a5 | 934 | */ |
| bogdanm | 92:4fc01daae5a5 | 935 | |
| bogdanm | 92:4fc01daae5a5 | 936 | /** |
| bogdanm | 92:4fc01daae5a5 | 937 | * @} |
| bogdanm | 92:4fc01daae5a5 | 938 | */ |
| bogdanm | 92:4fc01daae5a5 | 939 | |
| bogdanm | 85:024bf7f99721 | 940 | #ifdef __cplusplus |
| bogdanm | 85:024bf7f99721 | 941 | } |
| bogdanm | 85:024bf7f99721 | 942 | #endif |
| bogdanm | 85:024bf7f99721 | 943 | |
| bogdanm | 85:024bf7f99721 | 944 | #endif /* __STM32F0xx_HAL_UART_H */ |
| bogdanm | 85:024bf7f99721 | 945 | |
| bogdanm | 85:024bf7f99721 | 946 | /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |
| bogdanm | 92:4fc01daae5a5 | 947 |