/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/hal/adc/fsl_adc_hal.h substitute line 894 extern } by }
Fork of mbed by
TARGET_NUCLEO_L152RE/stm32l1xx_hal_comp_ex.h
- Committer:
- fblanc
- Date:
- 2014-12-05
- Revision:
- 93:9dd889aeda0e
- Parent:
- 90:cb3d968589d8
File content as of revision 93:9dd889aeda0e:
/** ****************************************************************************** * @file stm32l1xx_hal_comp_ex.h * @author MCD Application Team * @version V1.0.0 * @date 5-September-2014 * @brief Header file of COMP HAL Extension module. ****************************************************************************** * @attention * * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __STM32L1xx_HAL_COMP_EX_H #define __STM32L1xx_HAL_COMP_EX_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include "stm32l1xx_hal_def.h" /** @addtogroup STM32L1xx_HAL_Driver * @{ */ /** @defgroup COMPEx COMPEx * @{ */ /* Exported types ------------------------------------------------------------*/ /* Exported constants --------------------------------------------------------*/ /** @defgroup COMPEx_Exported_Constants COMPEx Exported Constants * @{ */ /** @defgroup COMPEx_NonInvertingInput COMPEx NonInvertingInput * @{ */ #if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) /* Non-inverting inputs specific to COMP2 */ #define COMP_NONINVERTINGINPUT_PB4 RI_IOSWITCH_GR6_1 /*!< I/O pin PB4 connection to COMP2 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB5 RI_IOSWITCH_GR6_2 /*!< I/O pin PB5 connection to COMP2 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB6 RI_IOSWITCH_GR6_3 /*!< I/O pin PB6 connection to COMP2 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB7 RI_IOSWITCH_GR6_4 /*!< I/O pin PB7 connection to COMP2 non-inverting input */ /* Non-inverting inputs specific to COMP1 */ #define COMP_NONINVERTINGINPUT_NONE ((uint32_t)0x00000000) /*!< In case of window mode: No I/O pin connection to COMP1 non-inverting input. Instead, connection to COMP2 non-inverting input. */ #define COMP_NONINVERTINGINPUT_PA0 RI_IOSWITCH_CH0 /*!< I/O pin PA0 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PA1 RI_IOSWITCH_CH1 /*!< I/O pin PA1 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PA2 RI_IOSWITCH_CH2 /*!< I/O pin PA2 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PA3 RI_IOSWITCH_CH3 /*!< I/O pin PA3 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PA4 RI_IOSWITCH_CH4 /*!< I/O pin PA4 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PA5 RI_IOSWITCH_CH5 /*!< I/O pin PA5 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PA6 RI_IOSWITCH_CH5 /*!< I/O pin PA5 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PA7 RI_IOSWITCH_CH7 /*!< I/O pin PA7 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB0 RI_IOSWITCH_CH8 /*!< I/O pin PB0 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB1 RI_IOSWITCH_CH9 /*!< I/O pin PB1 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PC0 RI_IOSWITCH_CH10 /*!< I/O pin PC0 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PC1 RI_IOSWITCH_CH11 /*!< I/O pin PC1 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PC2 RI_IOSWITCH_CH12 /*!< I/O pin PC2 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PC3 RI_IOSWITCH_CH13 /*!< I/O pin PC3 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PC4 RI_IOSWITCH_CH14 /*!< I/O pin PC4 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PC5 RI_IOSWITCH_CH15 /*!< I/O pin PC5 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB12 RI_IOSWITCH_CH18 /*!< I/O pin PB12 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB13 RI_IOSWITCH_CH19 /*!< I/O pin PB13 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB14 RI_IOSWITCH_CH20 /*!< I/O pin PB14 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB15 RI_IOSWITCH_CH21 /*!< I/O pin PB15 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PE7 RI_IOSWITCH_CH22 /*!< I/O pin PE7 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PE8 RI_IOSWITCH_CH23 /*!< I/O pin PE8 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PE9 RI_IOSWITCH_CH24 /*!< I/O pin PE9 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PE10 RI_IOSWITCH_CH25 /*!< I/O pin PE10 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PF6 RI_IOSWITCH_CH27 /*!< I/O pin PF6 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PF7 RI_IOSWITCH_CH28 /*!< I/O pin PF7 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PF8 RI_IOSWITCH_CH29 /*!< I/O pin PF8 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PF9 RI_IOSWITCH_CH30 /*!< I/O pin PF9 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PF10 RI_IOSWITCH_CH31 /*!< I/O pin PF10 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_OPAMP1 COMP_NONINVERTINGINPUT_PA3 /*!< OPAMP1 output connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_OPAMP2 COMP_NONINVERTINGINPUT_PB0 /*!< OPAMP2 output connection to COMP1 non-inverting input */ #if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) #define COMP_NONINVERTINGINPUT_OPAMP3 COMP_NONINVERTINGINPUT_PC3 /*!< OPAMP3 output connection to COMP1 non-inverting input */ #endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD */ #endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ #if defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) /* Non-inverting inputs specific to COMP2 */ #define COMP_NONINVERTINGINPUT_PB4 RI_IOSWITCH_GR6_1 /*!< I/O pin PB4 connection to COMP2 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB5 RI_IOSWITCH_GR6_2 /*!< I/O pin PB5 connection to COMP2 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB6 RI_IOSWITCH_GR6_3 /*!< I/O pin PB6 connection to COMP2 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB7 RI_IOSWITCH_GR6_4 /*!< I/O pin PB7 connection to COMP2 non-inverting input */ /* Non-inverting inputs specific to COMP1 */ #define COMP_NONINVERTINGINPUT_NONE ((uint32_t)0x00000000) /*!< In case of window mode: No I/O pin connection to COMP1 non-inverting input. Instead, connection to COMP2 non-inverting input. */ #define COMP_NONINVERTINGINPUT_PA0 RI_IOSWITCH_CH0 /*!< I/O pin PA0 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PA1 RI_IOSWITCH_CH1 /*!< I/O pin PA1 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PA2 RI_IOSWITCH_CH2 /*!< I/O pin PA2 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PA3 RI_IOSWITCH_CH3 /*!< I/O pin PA3 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PA4 RI_IOSWITCH_CH4 /*!< I/O pin PA4 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PA5 RI_IOSWITCH_CH5 /*!< I/O pin PA5 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PA6 RI_IOSWITCH_CH5 /*!< I/O pin PA5 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PA7 RI_IOSWITCH_CH7 /*!< I/O pin PA7 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB0 RI_IOSWITCH_CH8 /*!< I/O pin PB0 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB1 RI_IOSWITCH_CH9 /*!< I/O pin PB1 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PC0 RI_IOSWITCH_CH10 /*!< I/O pin PC0 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PC1 RI_IOSWITCH_CH11 /*!< I/O pin PC1 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PC2 RI_IOSWITCH_CH12 /*!< I/O pin PC2 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PC3 RI_IOSWITCH_CH13 /*!< I/O pin PC3 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PC4 RI_IOSWITCH_CH14 /*!< I/O pin PC4 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PC5 RI_IOSWITCH_CH15 /*!< I/O pin PC5 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB12 RI_IOSWITCH_CH18 /*!< I/O pin PB12 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB13 RI_IOSWITCH_CH19 /*!< I/O pin PB13 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB14 RI_IOSWITCH_CH20 /*!< I/O pin PB14 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB15 RI_IOSWITCH_CH21 /*!< I/O pin PB15 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PE7 RI_IOSWITCH_CH22 /*!< I/O pin PE7 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PE8 RI_IOSWITCH_CH23 /*!< I/O pin PE8 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PE9 RI_IOSWITCH_CH24 /*!< I/O pin PE9 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PE10 RI_IOSWITCH_CH25 /*!< I/O pin PE10 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_OPAMP1 COMP_NONINVERTINGINPUT_PA3 /*!< OPAMP1 output connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_OPAMP2 COMP_NONINVERTINGINPUT_PB0 /*!< OPAMP2 output connection to COMP1 non-inverting input */ #endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC */ #if defined(STM32L100xB) || defined (STM32L151xB) || defined (STM32L152xB) || defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) /* Non-inverting inputs specific to COMP2 */ #define COMP_NONINVERTINGINPUT_PB4 RI_IOSWITCH_GR6_1 /*!< I/O pin PB4 connection to COMP2 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB5 RI_IOSWITCH_GR6_2 /*!< I/O pin PB5 connection to COMP2 non-inverting input */ /* Non-inverting inputs specific to COMP1 */ #define COMP_NONINVERTINGINPUT_NONE ((uint32_t)0x00000000) /*!< In case of window mode: No I/O pin connection to COMP1 non-inverting input. Instead, connection to COMP2 non-inverting input. */ #define COMP_NONINVERTINGINPUT_PA0 RI_IOSWITCH_CH0 /*!< I/O pin PA0 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PA1 RI_IOSWITCH_CH1 /*!< I/O pin PA1 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PA2 RI_IOSWITCH_CH2 /*!< I/O pin PA2 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PA3 RI_IOSWITCH_CH3 /*!< I/O pin PA3 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PA4 RI_IOSWITCH_CH4 /*!< I/O pin PA4 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PA5 RI_IOSWITCH_CH5 /*!< I/O pin PA5 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PA6 RI_IOSWITCH_CH5 /*!< I/O pin PA5 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PA7 RI_IOSWITCH_CH7 /*!< I/O pin PA7 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB0 RI_IOSWITCH_CH8 /*!< I/O pin PB0 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB1 RI_IOSWITCH_CH9 /*!< I/O pin PB1 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PC0 RI_IOSWITCH_CH10 /*!< I/O pin PC0 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PC1 RI_IOSWITCH_CH11 /*!< I/O pin PC1 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PC2 RI_IOSWITCH_CH12 /*!< I/O pin PC2 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PC3 RI_IOSWITCH_CH13 /*!< I/O pin PC3 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PC4 RI_IOSWITCH_CH14 /*!< I/O pin PC4 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PC5 RI_IOSWITCH_CH15 /*!< I/O pin PC5 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB12 RI_IOSWITCH_CH18 /*!< I/O pin PB12 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB13 RI_IOSWITCH_CH19 /*!< I/O pin PB13 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB14 RI_IOSWITCH_CH20 /*!< I/O pin PB14 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PB15 RI_IOSWITCH_CH21 /*!< I/O pin PB15 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PE7 RI_IOSWITCH_CH22 /*!< I/O pin PE7 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PE8 RI_IOSWITCH_CH23 /*!< I/O pin PE8 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PE9 RI_IOSWITCH_CH24 /*!< I/O pin PE9 connection to COMP1 non-inverting input */ #define COMP_NONINVERTINGINPUT_PE10 RI_IOSWITCH_CH25 /*!< I/O pin PE10 connection to COMP1 non-inverting input */ #endif /* STM32L100xB || STM32L151xB || STM32L152xB || STM32L100xBA || STM32L151xBA || STM32L152xBA */ #if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) #define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_PB4) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB5) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB6) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB7) || \ ((INPUT) == COMP_NONINVERTINGINPUT_NONE) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PA0) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PA1) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PA2) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PA3) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PA4) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PA5) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PA6) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PA7) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB0) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB1) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PC0) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PC1) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PC2) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PC3) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PC4) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PC5) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB12) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB13) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB14) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB15) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PE7) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PE8) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PE9) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PE10) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PF6) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PF7) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PF8) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PF9) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PF10) ) #endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ #if defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) #define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_PB4) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB5) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB6) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB7) || \ ((INPUT) == COMP_NONINVERTINGINPUT_NONE) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PA0) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PA1) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PA2) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PA3) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PA4) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PA5) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PA6) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PA7) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB0) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB1) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PC0) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PC1) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PC2) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PC3) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PC4) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PC5) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB12) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB13) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB14) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB15) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PE7) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PE8) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PE9) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PE10) ) #endif /* STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC */ #if defined(STM32L100xB) || defined (STM32L151xB) || defined (STM32L152xB) || defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) #define IS_COMP_NONINVERTINGINPUT(INPUT) (((INPUT) == COMP_NONINVERTINGINPUT_PB4) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB5) || \ ((INPUT) == COMP_NONINVERTINGINPUT_NONE) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PA0) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PA1) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PA2) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PA3) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PA4) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PA5) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PA6) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PA7) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB0) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB1) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PC0) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PC1) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PC2) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PC3) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PC4) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PC5) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB12) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB13) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB14) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PB15) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PE7) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PE8) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PE9) || \ ((INPUT) == COMP_NONINVERTINGINPUT_PE10) ) #endif /* STM32L100xB || STM32L151xB || STM32L152xB || STM32L100xBA || STM32L151xBA || STM32L152xBA */ /** * @} */ /** * @} */ /* Exported macro ------------------------------------------------------------*/ /** @defgroup COMPEx_Private_Macro COMP Private Macro * @{ */ /** * @brief Specifies whether Routing Interface (RI) needs to be configured for * switches of comparator non-inverting input. * @param __HANDLE__: COMP handle. * @retval None. */ #if defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) #define __COMP_ROUTING_INTERFACE_TOBECONFIGURED(__HANDLE__) \ (((__HANDLE__)->Init.NonInvertingInput != COMP_NONINVERTINGINPUT_NONE) && \ (READ_BIT(COMP->CSR, COMP_CSR_SW1) == RESET) ) #else #define __COMP_ROUTING_INTERFACE_TOBECONFIGURED(__HANDLE__) \ ((__HANDLE__)->Init.NonInvertingInput != COMP_NONINVERTINGINPUT_NONE) #endif /* STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ /** * @} */ /* Exported functions --------------------------------------------------------*/ /** * @} */ /** * @} */ #ifdef __cplusplus } #endif #endif /* __STM32L1xx_HAL_COMP_EX_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/