frederic blanc
/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/hal/adc/fsl_adc_hal.h substitute line 894 extern } by }
Fork of
mbed
by 
mbed official
TARGET_NUCLEO_F103RB/stm32f10x_gpio.h
- Committer:
- emilmont
- Date:
- 2014-02-14
- Revision:
- 77:869cf507173a
- Parent:
- 76:824293ae5e43
File content as of revision 77:869cf507173a:
/**
******************************************************************************
* @file stm32f10x_gpio.h
* @author MCD Application Team
* @version V3.6.1
* @date 05-March-2012
* @brief This file contains all the functions prototypes for the GPIO
* firmware library.
*******************************************************************************
* Copyright (c) 2014, STMicroelectronics
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F10x_GPIO_H
#define __STM32F10x_GPIO_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
/** @addtogroup STM32F10x_StdPeriph_Driver
* @{
*/
/** @addtogroup GPIO
* @{
*/
/** @defgroup GPIO_Exported_Types
* @{
*/
#define IS_GPIO_ALL_PERIPH(PERIPH) (((PERIPH) == GPIOA) || \
((PERIPH) == GPIOB) || \
((PERIPH) == GPIOC) || \
((PERIPH) == GPIOD) || \
((PERIPH) == GPIOE) || \
((PERIPH) == GPIOF) || \
((PERIPH) == GPIOG))
/**
* @brief Output Maximum frequency selection
*/
typedef enum
{
GPIO_Speed_10MHz = 1,
GPIO_Speed_2MHz,
GPIO_Speed_50MHz
}GPIOSpeed_TypeDef;
#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_10MHz) || ((SPEED) == GPIO_Speed_2MHz) || \
((SPEED) == GPIO_Speed_50MHz))
/**
* @brief Configuration Mode enumeration
*/
typedef enum
{ GPIO_Mode_AIN = 0x0,
GPIO_Mode_IN_FLOATING = 0x04,
GPIO_Mode_IPD = 0x28,
GPIO_Mode_IPU = 0x48,
GPIO_Mode_Out_OD = 0x14,
GPIO_Mode_Out_PP = 0x10,
GPIO_Mode_AF_OD = 0x1C,
GPIO_Mode_AF_PP = 0x18
}GPIOMode_TypeDef;
#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_AIN) || ((MODE) == GPIO_Mode_IN_FLOATING) || \
((MODE) == GPIO_Mode_IPD) || ((MODE) == GPIO_Mode_IPU) || \
((MODE) == GPIO_Mode_Out_OD) || ((MODE) == GPIO_Mode_Out_PP) || \
((MODE) == GPIO_Mode_AF_OD) || ((MODE) == GPIO_Mode_AF_PP))
/**
* @brief GPIO Init structure definition
*/
typedef struct
{
uint16_t GPIO_Pin; /*!< Specifies the GPIO pins to be configured.
This parameter can be any value of @ref GPIO_pins_define */
GPIOSpeed_TypeDef GPIO_Speed; /*!< Specifies the speed for the selected pins.
This parameter can be a value of @ref GPIOSpeed_TypeDef */
GPIOMode_TypeDef GPIO_Mode; /*!< Specifies the operating mode for the selected pins.
This parameter can be a value of @ref GPIOMode_TypeDef */
}GPIO_InitTypeDef;
/**
* @brief Bit_SET and Bit_RESET enumeration
*/
typedef enum
{ Bit_RESET = 0,
Bit_SET
}BitAction;
#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET))
/**
* @}
*/
/** @defgroup GPIO_Exported_Constants
* @{
*/
/** @defgroup GPIO_pins_define
* @{
*/
#define GPIO_Pin_0 ((uint16_t)0x0001) /*!< Pin 0 selected */
#define GPIO_Pin_1 ((uint16_t)0x0002) /*!< Pin 1 selected */
#define GPIO_Pin_2 ((uint16_t)0x0004) /*!< Pin 2 selected */
#define GPIO_Pin_3 ((uint16_t)0x0008) /*!< Pin 3 selected */
#define GPIO_Pin_4 ((uint16_t)0x0010) /*!< Pin 4 selected */
#define GPIO_Pin_5 ((uint16_t)0x0020) /*!< Pin 5 selected */
#define GPIO_Pin_6 ((uint16_t)0x0040) /*!< Pin 6 selected */
#define GPIO_Pin_7 ((uint16_t)0x0080) /*!< Pin 7 selected */
#define GPIO_Pin_8 ((uint16_t)0x0100) /*!< Pin 8 selected */
#define GPIO_Pin_9 ((uint16_t)0x0200) /*!< Pin 9 selected */
#define GPIO_Pin_10 ((uint16_t)0x0400) /*!< Pin 10 selected */
#define GPIO_Pin_11 ((uint16_t)0x0800) /*!< Pin 11 selected */
#define GPIO_Pin_12 ((uint16_t)0x1000) /*!< Pin 12 selected */
#define GPIO_Pin_13 ((uint16_t)0x2000) /*!< Pin 13 selected */
#define GPIO_Pin_14 ((uint16_t)0x4000) /*!< Pin 14 selected */
#define GPIO_Pin_15 ((uint16_t)0x8000) /*!< Pin 15 selected */
#define GPIO_Pin_All ((uint16_t)0xFFFF) /*!< All pins selected */
#define IS_GPIO_PIN(PIN) ((((PIN) & (uint16_t)0x00) == 0x00) && ((PIN) != (uint16_t)0x00))
#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \
((PIN) == GPIO_Pin_1) || \
((PIN) == GPIO_Pin_2) || \
((PIN) == GPIO_Pin_3) || \
((PIN) == GPIO_Pin_4) || \
((PIN) == GPIO_Pin_5) || \
((PIN) == GPIO_Pin_6) || \
((PIN) == GPIO_Pin_7) || \
((PIN) == GPIO_Pin_8) || \
((PIN) == GPIO_Pin_9) || \
((PIN) == GPIO_Pin_10) || \
((PIN) == GPIO_Pin_11) || \
((PIN) == GPIO_Pin_12) || \
((PIN) == GPIO_Pin_13) || \
((PIN) == GPIO_Pin_14) || \
((PIN) == GPIO_Pin_15))
/**
* @}
*/
/** @defgroup GPIO_Remap_define
* @{
*/
#define GPIO_Remap_SPI1 ((uint32_t)0x00000001) /*!< SPI1 Alternate Function mapping */
#define GPIO_Remap_I2C1 ((uint32_t)0x00000002) /*!< I2C1 Alternate Function mapping */
#define GPIO_Remap_USART1 ((uint32_t)0x00000004) /*!< USART1 Alternate Function mapping */
#define GPIO_Remap_USART2 ((uint32_t)0x00000008) /*!< USART2 Alternate Function mapping */
#define GPIO_PartialRemap_USART3 ((uint32_t)0x00140010) /*!< USART3 Partial Alternate Function mapping */
#define GPIO_FullRemap_USART3 ((uint32_t)0x00140030) /*!< USART3 Full Alternate Function mapping */
#define GPIO_PartialRemap_TIM1 ((uint32_t)0x00160040) /*!< TIM1 Partial Alternate Function mapping */
#define GPIO_FullRemap_TIM1 ((uint32_t)0x001600C0) /*!< TIM1 Full Alternate Function mapping */
#define GPIO_PartialRemap1_TIM2 ((uint32_t)0x00180100) /*!< TIM2 Partial1 Alternate Function mapping */
#define GPIO_PartialRemap2_TIM2 ((uint32_t)0x00180200) /*!< TIM2 Partial2 Alternate Function mapping */
#define GPIO_FullRemap_TIM2 ((uint32_t)0x00180300) /*!< TIM2 Full Alternate Function mapping */
#define GPIO_PartialRemap_TIM3 ((uint32_t)0x001A0800) /*!< TIM3 Partial Alternate Function mapping */
#define GPIO_FullRemap_TIM3 ((uint32_t)0x001A0C00) /*!< TIM3 Full Alternate Function mapping */
#define GPIO_Remap_TIM4 ((uint32_t)0x00001000) /*!< TIM4 Alternate Function mapping */
#define GPIO_Remap1_CAN1 ((uint32_t)0x001D4000) /*!< CAN1 Alternate Function mapping */
#define GPIO_Remap2_CAN1 ((uint32_t)0x001D6000) /*!< CAN1 Alternate Function mapping */
#define GPIO_Remap_PD01 ((uint32_t)0x00008000) /*!< PD01 Alternate Function mapping */
#define GPIO_Remap_TIM5CH4_LSI ((uint32_t)0x00200001) /*!< LSI connected to TIM5 Channel4 input capture for calibration */
#define GPIO_Remap_ADC1_ETRGINJ ((uint32_t)0x00200002) /*!< ADC1 External Trigger Injected Conversion remapping */
#define GPIO_Remap_ADC1_ETRGREG ((uint32_t)0x00200004) /*!< ADC1 External Trigger Regular Conversion remapping */
#define GPIO_Remap_ADC2_ETRGINJ ((uint32_t)0x00200008) /*!< ADC2 External Trigger Injected Conversion remapping */
#define GPIO_Remap_ADC2_ETRGREG ((uint32_t)0x00200010) /*!< ADC2 External Trigger Regular Conversion remapping */
#define GPIO_Remap_ETH ((uint32_t)0x00200020) /*!< Ethernet remapping (only for Connectivity line devices) */
#define GPIO_Remap_CAN2 ((uint32_t)0x00200040) /*!< CAN2 remapping (only for Connectivity line devices) */
#define GPIO_Remap_SWJ_NoJTRST ((uint32_t)0x00300100) /*!< Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST */
#define GPIO_Remap_SWJ_JTAGDisable ((uint32_t)0x00300200) /*!< JTAG-DP Disabled and SW-DP Enabled */
#define GPIO_Remap_SWJ_Disable ((uint32_t)0x00300400) /*!< Full SWJ Disabled (JTAG-DP + SW-DP) */
#define GPIO_Remap_SPI3 ((uint32_t)0x00201100) /*!< SPI3/I2S3 Alternate Function mapping (only for Connectivity line devices) */
#define GPIO_Remap_TIM2ITR1_PTP_SOF ((uint32_t)0x00202000) /*!< Ethernet PTP output or USB OTG SOF (Start of Frame) connected
to TIM2 Internal Trigger 1 for calibration
(only for Connectivity line devices) */
#define GPIO_Remap_PTP_PPS ((uint32_t)0x00204000) /*!< Ethernet MAC PPS_PTS output on PB05 (only for Connectivity line devices) */
#define GPIO_Remap_TIM15 ((uint32_t)0x80000001) /*!< TIM15 Alternate Function mapping (only for Value line devices) */
#define GPIO_Remap_TIM16 ((uint32_t)0x80000002) /*!< TIM16 Alternate Function mapping (only for Value line devices) */
#define GPIO_Remap_TIM17 ((uint32_t)0x80000004) /*!< TIM17 Alternate Function mapping (only for Value line devices) */
#define GPIO_Remap_CEC ((uint32_t)0x80000008) /*!< CEC Alternate Function mapping (only for Value line devices) */
#define GPIO_Remap_TIM1_DMA ((uint32_t)0x80000010) /*!< TIM1 DMA requests mapping (only for Value line devices) */
#define GPIO_Remap_TIM9 ((uint32_t)0x80000020) /*!< TIM9 Alternate Function mapping (only for XL-density devices) */
#define GPIO_Remap_TIM10 ((uint32_t)0x80000040) /*!< TIM10 Alternate Function mapping (only for XL-density devices) */
#define GPIO_Remap_TIM11 ((uint32_t)0x80000080) /*!< TIM11 Alternate Function mapping (only for XL-density devices) */
#define GPIO_Remap_TIM13 ((uint32_t)0x80000100) /*!< TIM13 Alternate Function mapping (only for High density Value line and XL-density devices) */
#define GPIO_Remap_TIM14 ((uint32_t)0x80000200) /*!< TIM14 Alternate Function mapping (only for High density Value line and XL-density devices) */
#define GPIO_Remap_FSMC_NADV ((uint32_t)0x80000400) /*!< FSMC_NADV Alternate Function mapping (only for High density Value line and XL-density devices) */
#define GPIO_Remap_TIM67_DAC_DMA ((uint32_t)0x80000800) /*!< TIM6/TIM7 and DAC DMA requests remapping (only for High density Value line devices) */
#define GPIO_Remap_TIM12 ((uint32_t)0x80001000) /*!< TIM12 Alternate Function mapping (only for High density Value line devices) */
#define GPIO_Remap_MISC ((uint32_t)0x80002000) /*!< Miscellaneous Remap (DMA2 Channel5 Position and DAC Trigger remapping,
only for High density Value line devices) */
#define IS_GPIO_REMAP(REMAP) (((REMAP) == GPIO_Remap_SPI1) || ((REMAP) == GPIO_Remap_I2C1) || \
((REMAP) == GPIO_Remap_USART1) || ((REMAP) == GPIO_Remap_USART2) || \
((REMAP) == GPIO_PartialRemap_USART3) || ((REMAP) == GPIO_FullRemap_USART3) || \
((REMAP) == GPIO_PartialRemap_TIM1) || ((REMAP) == GPIO_FullRemap_TIM1) || \
((REMAP) == GPIO_PartialRemap1_TIM2) || ((REMAP) == GPIO_PartialRemap2_TIM2) || \
((REMAP) == GPIO_FullRemap_TIM2) || ((REMAP) == GPIO_PartialRemap_TIM3) || \
((REMAP) == GPIO_FullRemap_TIM3) || ((REMAP) == GPIO_Remap_TIM4) || \
((REMAP) == GPIO_Remap1_CAN1) || ((REMAP) == GPIO_Remap2_CAN1) || \
((REMAP) == GPIO_Remap_PD01) || ((REMAP) == GPIO_Remap_TIM5CH4_LSI) || \
((REMAP) == GPIO_Remap_ADC1_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC1_ETRGREG) || \
((REMAP) == GPIO_Remap_ADC2_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC2_ETRGREG) || \
((REMAP) == GPIO_Remap_ETH) ||((REMAP) == GPIO_Remap_CAN2) || \
((REMAP) == GPIO_Remap_SWJ_NoJTRST) || ((REMAP) == GPIO_Remap_SWJ_JTAGDisable) || \
((REMAP) == GPIO_Remap_SWJ_Disable)|| ((REMAP) == GPIO_Remap_SPI3) || \
((REMAP) == GPIO_Remap_TIM2ITR1_PTP_SOF) || ((REMAP) == GPIO_Remap_PTP_PPS) || \
((REMAP) == GPIO_Remap_TIM15) || ((REMAP) == GPIO_Remap_TIM16) || \
((REMAP) == GPIO_Remap_TIM17) || ((REMAP) == GPIO_Remap_CEC) || \
((REMAP) == GPIO_Remap_TIM1_DMA) || ((REMAP) == GPIO_Remap_TIM9) || \
((REMAP) == GPIO_Remap_TIM10) || ((REMAP) == GPIO_Remap_TIM11) || \
((REMAP) == GPIO_Remap_TIM13) || ((REMAP) == GPIO_Remap_TIM14) || \
((REMAP) == GPIO_Remap_FSMC_NADV) || ((REMAP) == GPIO_Remap_TIM67_DAC_DMA) || \
((REMAP) == GPIO_Remap_TIM12) || ((REMAP) == GPIO_Remap_MISC))
/**
* @}
*/
/** @defgroup GPIO_Port_Sources
* @{
*/
#define GPIO_PortSourceGPIOA ((uint8_t)0x00)
#define GPIO_PortSourceGPIOB ((uint8_t)0x01)
#define GPIO_PortSourceGPIOC ((uint8_t)0x02)
#define GPIO_PortSourceGPIOD ((uint8_t)0x03)
#define GPIO_PortSourceGPIOE ((uint8_t)0x04)
#define GPIO_PortSourceGPIOF ((uint8_t)0x05)
#define GPIO_PortSourceGPIOG ((uint8_t)0x06)
#define IS_GPIO_EVENTOUT_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \
((PORTSOURCE) == GPIO_PortSourceGPIOB) || \
((PORTSOURCE) == GPIO_PortSourceGPIOC) || \
((PORTSOURCE) == GPIO_PortSourceGPIOD) || \
((PORTSOURCE) == GPIO_PortSourceGPIOE))
#define IS_GPIO_EXTI_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \
((PORTSOURCE) == GPIO_PortSourceGPIOB) || \
((PORTSOURCE) == GPIO_PortSourceGPIOC) || \
((PORTSOURCE) == GPIO_PortSourceGPIOD) || \
((PORTSOURCE) == GPIO_PortSourceGPIOE) || \
((PORTSOURCE) == GPIO_PortSourceGPIOF) || \
((PORTSOURCE) == GPIO_PortSourceGPIOG))
/**
* @}
*/
/** @defgroup GPIO_Pin_sources
* @{
*/
#define GPIO_PinSource0 ((uint8_t)0x00)
#define GPIO_PinSource1 ((uint8_t)0x01)
#define GPIO_PinSource2 ((uint8_t)0x02)
#define GPIO_PinSource3 ((uint8_t)0x03)
#define GPIO_PinSource4 ((uint8_t)0x04)
#define GPIO_PinSource5 ((uint8_t)0x05)
#define GPIO_PinSource6 ((uint8_t)0x06)
#define GPIO_PinSource7 ((uint8_t)0x07)
#define GPIO_PinSource8 ((uint8_t)0x08)
#define GPIO_PinSource9 ((uint8_t)0x09)
#define GPIO_PinSource10 ((uint8_t)0x0A)
#define GPIO_PinSource11 ((uint8_t)0x0B)
#define GPIO_PinSource12 ((uint8_t)0x0C)
#define GPIO_PinSource13 ((uint8_t)0x0D)
#define GPIO_PinSource14 ((uint8_t)0x0E)
#define GPIO_PinSource15 ((uint8_t)0x0F)
#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \
((PINSOURCE) == GPIO_PinSource1) || \
((PINSOURCE) == GPIO_PinSource2) || \
((PINSOURCE) == GPIO_PinSource3) || \
((PINSOURCE) == GPIO_PinSource4) || \
((PINSOURCE) == GPIO_PinSource5) || \
((PINSOURCE) == GPIO_PinSource6) || \
((PINSOURCE) == GPIO_PinSource7) || \
((PINSOURCE) == GPIO_PinSource8) || \
((PINSOURCE) == GPIO_PinSource9) || \
((PINSOURCE) == GPIO_PinSource10) || \
((PINSOURCE) == GPIO_PinSource11) || \
((PINSOURCE) == GPIO_PinSource12) || \
((PINSOURCE) == GPIO_PinSource13) || \
((PINSOURCE) == GPIO_PinSource14) || \
((PINSOURCE) == GPIO_PinSource15))
/**
* @}
*/
/** @defgroup Ethernet_Media_Interface
* @{
*/
#define GPIO_ETH_MediaInterface_MII ((u32)0x00000000)
#define GPIO_ETH_MediaInterface_RMII ((u32)0x00000001)
#define IS_GPIO_ETH_MEDIA_INTERFACE(INTERFACE) (((INTERFACE) == GPIO_ETH_MediaInterface_MII) || \
((INTERFACE) == GPIO_ETH_MediaInterface_RMII))
/**
* @}
*/
/**
* @}
*/
/** @defgroup GPIO_Exported_Macros
* @{
*/
/**
* @}
*/
/** @defgroup GPIO_Exported_Functions
* @{
*/
void GPIO_DeInit(GPIO_TypeDef* GPIOx);
void GPIO_AFIODeInit(void);
void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct);
void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct);
uint8_t GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
uint16_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx);
uint8_t GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
uint16_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx);
void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
void GPIO_WriteBit(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, BitAction BitVal);
void GPIO_Write(GPIO_TypeDef* GPIOx, uint16_t PortVal);
void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin);
void GPIO_EventOutputConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource);
void GPIO_EventOutputCmd(FunctionalState NewState);
void GPIO_PinRemapConfig(uint32_t GPIO_Remap, FunctionalState NewState);
void GPIO_EXTILineConfig(uint8_t GPIO_PortSource, uint8_t GPIO_PinSource);
void GPIO_ETH_MediaInterfaceConfig(uint32_t GPIO_ETH_MediaInterface);
#ifdef __cplusplus
}
#endif
#endif /* __STM32F10x_GPIO_H */
/**
* @}
*/
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/