frederic blanc
/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/hal/adc/fsl_adc_hal.h substitute line 894 extern } by }
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F091RC/stm32f0xx_hal_uart_ex.h
- Revision:
- 90:cb3d968589d8
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F091RC/stm32f0xx_hal_uart_ex.h Tue Oct 28 16:40:41 2014 +0000
@@ -0,0 +1,649 @@
+/**
+ ******************************************************************************
+ * @file stm32f0xx_hal_uart_ex.h
+ * @author MCD Application Team
+ * @version V1.1.0
+ * @date 03-Oct-2014
+ * @brief Header file of UART HAL Extension module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F0xx_HAL_UART_EX_H
+#define __STM32F0xx_HAL_UART_EX_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f0xx_hal_def.h"
+
+/** @addtogroup STM32F0xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup UARTEx
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/** @defgroup UARTEx_Exported_Constants UARTEx Exported Constants
+ * @{
+ */
+
+/** @defgroup UARTEx_Word_Length UARTEx Word Length
+ * @{
+ */
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)
+#define UART_WORDLENGTH_7B ((uint32_t)USART_CR1_M1)
+#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M0)
+#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_7B) || \
+ ((LENGTH) == UART_WORDLENGTH_8B) || \
+ ((LENGTH) == UART_WORDLENGTH_9B))
+#else
+#define UART_WORDLENGTH_8B ((uint32_t)0x00000000)
+#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M)
+#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \
+ ((LENGTH) == UART_WORDLENGTH_9B))
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx) */
+/**
+ * @}
+ */
+
+/** @defgroup UARTEx_AutoBaud_Rate_Mode UARTEx Advanced Feature AutoBaud Rate Mode
+ * @{
+ */
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME ((uint32_t)USART_CR2_ABRMODE_1)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME ((uint32_t)USART_CR2_ABRMODE)
+#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \
+ ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE) || \
+ ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X7FFRAME) || \
+ ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ON0X55FRAME))
+#else
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT ((uint32_t)0x0000)
+#define UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE ((uint32_t)USART_CR2_ABRMODE_0)
+#define IS_UART_ADVFEATURE_AUTOBAUDRATEMODE(MODE) (((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONSTARTBIT) || \
+ ((MODE) == UART_ADVFEATURE_AUTOBAUDRATE_ONFALLINGEDGE))
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx) */
+/**
+ * @}
+ */
+
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8)
+/** @defgroup UARTEx_LIN UARTEx Local Interconnection Network mode
+ * @{
+ */
+#define UART_LIN_DISABLE ((uint32_t)0x00000000)
+#define UART_LIN_ENABLE ((uint32_t)USART_CR2_LINEN)
+#define IS_UART_LIN(LIN) (((LIN) == UART_LIN_DISABLE) || \
+ ((LIN) == UART_LIN_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UARTEx_LIN_Break_Detection UARTEx LIN Break Detection
+ * @{
+ */
+#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000)
+#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)USART_CR2_LBDL)
+#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \
+ ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B))
+/**
+ * @}
+ */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+
+/** @defgroup UART_Flags UARTEx Status Flags
+ * Elements values convention: 0xXXXX
+ * - 0xXXXX : Flag mask in the ISR register
+ * @{
+ */
+#define UART_FLAG_REACK ((uint32_t)0x00400000)
+#define UART_FLAG_TEACK ((uint32_t)0x00200000)
+#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#define UART_FLAG_WUF ((uint32_t)0x00100000)
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#define UART_FLAG_RWU ((uint32_t)0x00080000)
+#define UART_FLAG_SBKF ((uint32_t)0x00040000
+#define UART_FLAG_CMF ((uint32_t)0x00020000)
+#define UART_FLAG_BUSY ((uint32_t)0x00010000)
+#define UART_FLAG_ABRF ((uint32_t)0x00008000)
+#define UART_FLAG_ABRE ((uint32_t)0x00004000)
+#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#define UART_FLAG_EOBF ((uint32_t)0x00001000)
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#define UART_FLAG_RTOF ((uint32_t)0x00000800)
+#define UART_FLAG_CTS ((uint32_t)0x00000400)
+#define UART_FLAG_CTSIF ((uint32_t)0x00000200)
+#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#define UART_FLAG_LBDF ((uint32_t)0x00000100)
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#define UART_FLAG_TXE ((uint32_t)0x00000080)
+#define UART_FLAG_TC ((uint32_t)0x00000040)
+#define UART_FLAG_RXNE ((uint32_t)0x00000020)
+#define UART_FLAG_IDLE ((uint32_t)0x00000010)
+#define UART_FLAG_ORE ((uint32_t)0x00000008)
+#define UART_FLAG_NE ((uint32_t)0x00000004)
+#define UART_FLAG_FE ((uint32_t)0x00000002)
+#define UART_FLAG_PE ((uint32_t)0x00000001)
+/**
+ * @}
+ */
+
+/** @defgroup UART_Interrupt_definition UARTEx Interrupts Definition
+ * Elements values convention: 0000ZZZZ0XXYYYYYb
+ * - YYYYY : Interrupt source position in the XX register (5bits)
+ * - XX : Interrupt source register (2bits)
+ * - 01: CR1 register
+ * - 10: CR2 register
+ * - 11: CR3 register
+ * - ZZZZ : Flag position in the ISR register(4bits)
+ * @{
+ */
+#define UART_IT_PE ((uint16_t)0x0028)
+#define UART_IT_TXE ((uint16_t)0x0727)
+#define UART_IT_TC ((uint16_t)0x0626)
+#define UART_IT_RXNE ((uint16_t)0x0525)
+#define UART_IT_IDLE ((uint16_t)0x0424)
+#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#define UART_IT_LBD ((uint16_t)0x0846)
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#define UART_IT_CTS ((uint16_t)0x096A)
+#define UART_IT_CM ((uint16_t)0x142E)
+#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#define UART_IT_WUF ((uint16_t)0x1476)
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+/**
+ * @}
+ */
+
+
+/** @defgroup UART_IT_CLEAR_Flags UARTEx Interruption Clear Flags
+ * @{
+ */
+#define UART_CLEAR_PEF USART_ICR_PECF /*!< Parity Error Clear Flag */
+#define UART_CLEAR_FEF USART_ICR_FECF /*!< Framing Error Clear Flag */
+#define UART_CLEAR_NEF USART_ICR_NCF /*!< Noise detected Clear Flag */
+#define UART_CLEAR_OREF USART_ICR_ORECF /*!< OverRun Error Clear Flag */
+#define UART_CLEAR_IDLEF USART_ICR_IDLECF /*!< IDLE line detected Clear Flag */
+#define UART_CLEAR_TCF USART_ICR_TCCF /*!< Transmission Complete Clear Flag */
+#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#define UART_CLEAR_LBDF USART_ICR_LBDCF /*!< LIN Break Detection Clear Flag (not available on F030xx devices)*/
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+#define UART_CLEAR_CTSF USART_ICR_CTSCF /*!< CTS Interrupt Clear Flag */
+#define UART_CLEAR_RTOF USART_ICR_RTOCF /*!< Receiver Time Out Clear Flag */
+#define UART_CLEAR_EOBF USART_ICR_EOBCF /*!< End Of Block Clear Flag */
+#define UART_CLEAR_CMF USART_ICR_CMCF /*!< Character Match Clear Flag */
+#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#define UART_CLEAR_WUF USART_ICR_WUCF /*!< Wake Up from stop mode Clear Flag */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+/**
+ * @}
+ */
+
+/** @defgroup UART_Request_Parameters UARTEx Request Parameters
+ * @{
+ */
+#define UART_AUTOBAUD_REQUEST ((uint32_t)USART_RQR_ABRRQ) /*!< Auto-Baud Rate Request */
+#define UART_SENDBREAK_REQUEST ((uint32_t)USART_RQR_SBKRQ) /*!< Send Break Request */
+#define UART_MUTE_MODE_REQUEST ((uint32_t)USART_RQR_MMRQ) /*!< Mute Mode Request */
+#define UART_RXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_RXFRQ) /*!< Receive Data flush Request */
+#if !defined(STM32F030x6) && !defined(STM32F030x8)
+#define UART_TXDATA_FLUSH_REQUEST ((uint32_t)USART_RQR_TXFRQ) /*!< Transmit data flush Request */
+#define IS_UART_REQUEST_PARAMETER(PARAM) (((PARAM) == UART_AUTOBAUD_REQUEST) || \
+ ((PARAM) == UART_SENDBREAK_REQUEST) || \
+ ((PARAM) == UART_MUTE_MODE_REQUEST) || \
+ ((PARAM) == UART_RXDATA_FLUSH_REQUEST) || \
+ ((PARAM) == UART_TXDATA_FLUSH_REQUEST))
+#else
+#define IS_UART_REQUEST_PARAMETER(PARAM) (((PARAM) == UART_AUTOBAUD_REQUEST) || \
+ ((PARAM) == UART_SENDBREAK_REQUEST) || \
+ ((PARAM) == UART_MUTE_MODE_REQUEST) || \
+ ((PARAM) == UART_RXDATA_FLUSH_REQUEST))
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+/**
+ * @}
+ */
+
+#if !defined(STM32F030x6) && !defined(STM32F030x8)
+/** @defgroup UART_Stop_Mode_Enable UARTEx Advanced Feature Stop Mode Enable
+ * @{
+ */
+#define UART_ADVFEATURE_STOPMODE_DISABLE ((uint32_t)0x00000000)
+#define UART_ADVFEATURE_STOPMODE_ENABLE ((uint32_t)USART_CR1_UESM)
+#define IS_UART_ADVFEATURE_STOPMODE(STOPMODE) (((STOPMODE) == UART_ADVFEATURE_STOPMODE_DISABLE) || \
+ ((STOPMODE) == UART_ADVFEATURE_STOPMODE_ENABLE))
+/**
+ * @}
+ */
+
+/** @defgroup UART_WakeUp_from_Stop_Selection UART WakeUp From Stop Selection
+ * @{
+ */
+#define UART_WAKEUP_ON_ADDRESS ((uint32_t)0x0000)
+#define UART_WAKEUP_ON_STARTBIT ((uint32_t)USART_CR3_WUS_1)
+#define UART_WAKEUP_ON_READDATA_NONEMPTY ((uint32_t)USART_CR3_WUS)
+#define IS_UART_WAKEUP_SELECTION(WAKE) (((WAKE) == UART_WAKEUP_ON_ADDRESS) || \
+ ((WAKE) == UART_WAKEUP_ON_STARTBIT) || \
+ ((WAKE) == UART_WAKEUP_ON_READDATA_NONEMPTY))
+/**
+ * @}
+ */
+#endif /* !defined(STM32F030x6) && !defined(STM32F030x8) */
+
+/**
+ * @}
+ */
+
+/* Exported macro ------------------------------------------------------------*/
+
+/** @defgroup UARTEx_Exported_Macros UARTEx Exported Macros
+ * @{
+ */
+
+/** @brief Reports the UART clock source.
+ * @param __HANDLE__: specifies the UART Handle
+ * @param __CLOCKSOURCE__ : output variable
+ * @retval UART clocking source, written in __CLOCKSOURCE__.
+ */
+
+
+#if defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } while(0)
+#elif defined (STM32F030x8) || \
+ defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F051x8) || defined (STM32F058xx)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F071xB) || defined(STM32F072xB) || defined(STM32F078xx)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+#elif defined(STM32F091xC) || defined (STM32F098xx)
+#define __HAL_UART_GETCLOCKSOURCE(__HANDLE__,__CLOCKSOURCE__) \
+ do { \
+ if((__HANDLE__)->Instance == USART1) \
+ { \
+ switch(__HAL_RCC_GET_USART1_SOURCE()) \
+ { \
+ case RCC_USART1CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART1CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART1CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART1CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART2) \
+ { \
+ switch(__HAL_RCC_GET_USART2_SOURCE()) \
+ { \
+ case RCC_USART2CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART2CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART2CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART2CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART3) \
+ { \
+ switch(__HAL_RCC_GET_USART3_SOURCE()) \
+ { \
+ case RCC_USART3CLKSOURCE_PCLK1: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ break; \
+ case RCC_USART3CLKSOURCE_HSI: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_HSI; \
+ break; \
+ case RCC_USART3CLKSOURCE_SYSCLK: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_SYSCLK; \
+ break; \
+ case RCC_USART3CLKSOURCE_LSE: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_LSE; \
+ break; \
+ default: \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ break; \
+ } \
+ } \
+ else if((__HANDLE__)->Instance == USART4) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART5) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART6) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART7) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else if((__HANDLE__)->Instance == USART8) \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_PCLK1; \
+ } \
+ else \
+ { \
+ (__CLOCKSOURCE__) = UART_CLOCKSOURCE_UNDEFINED; \
+ } \
+ } while(0)
+
+#endif /* defined(STM32F030x6) || defined(STM32F031x6) || defined(STM32F038xx) */
+
+
+/** @brief Computes the UART mask to apply to retrieve the received data
+ * according to the word length and to the parity bits activation.
+ * If PCE = 1, the parity bit is not included in the data extracted
+ * by the reception API().
+ * This masking operation is not carried out in the case of
+ * DMA transfers.
+ * @param __HANDLE__: specifies the UART Handle
+ * @retval none
+ */
+#if defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx)
+#define __HAL_UART_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_7B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x003F ; \
+ } \
+ } \
+} while(0)
+#else
+#define __HAL_UART_MASK_COMPUTATION(__HANDLE__) \
+ do { \
+ if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_9B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x01FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ } \
+ else if ((__HANDLE__)->Init.WordLength == UART_WORDLENGTH_8B) \
+ { \
+ if ((__HANDLE__)->Init.Parity == UART_PARITY_NONE) \
+ { \
+ (__HANDLE__)->Mask = 0x00FF ; \
+ } \
+ else \
+ { \
+ (__HANDLE__)->Mask = 0x007F ; \
+ } \
+ } \
+} while(0)
+#endif /* defined (STM32F042x6) || defined (STM32F048xx) || \
+ defined (STM32F071xB) || defined (STM32F072xB) || defined (STM32F078xx) || \
+ defined (STM32F091xC) || defined (STM32F098xx) */
+/**
+ * @}
+ */
+
+/* Exported functions --------------------------------------------------------*/
+/** @addtogroup UARTEx_Exported_Functions
+ * @{
+ */
+
+/** @addtogroup UARTEx_Exported_Functions_Group1
+ * @brief Extended Initialization and Configuration Functions
+ * @{
+ */
+/* Initialization and de-initialization functions ****************************/
+HAL_StatusTypeDef HAL_RS485Ex_Init(UART_HandleTypeDef *huart, uint32_t UART_DEPolarity, uint32_t UART_DEAssertionTime, uint32_t UART_DEDeassertionTime);
+HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength);
+HAL_StatusTypeDef HAL_UARTEx_StopModeWakeUpSourceConfig(UART_HandleTypeDef *huart, UART_WakeUpTypeDef WakeUpSelection);
+HAL_StatusTypeDef HAL_UARTEx_EnableStopMode(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_UARTEx_DisableStopMode(UART_HandleTypeDef *huart);
+/**
+ * @}
+ */
+
+/** @addtogroup UARTEx_Exported_Functions_Group2
+ * @brief Extended I/O operation functions
+ * @{
+ */
+
+/* I/O operation functions ***************************************************/
+void HAL_UART_IRQHandler(UART_HandleTypeDef *huart);
+void HAL_UART_WakeupCallback(UART_HandleTypeDef *huart);
+/**
+ * @}
+ */
+
+/** @addtogroup UARTEx_Exported_Functions_Group3
+ * @brief Extended Peripheral Control functions
+ * @{
+ */
+
+/* Peripheral Control functions **********************************************/
+void UART_AdvFeatureConfig(UART_HandleTypeDef *huart);
+HAL_StatusTypeDef HAL_MultiProcessorEx_AddressLength_Set(UART_HandleTypeDef *huart, uint32_t AddressLength);
+HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart);
+/**
+ * @}
+ */
+/* Peripheral State functions ************************************************/
+
+/**
+ * @}
+ */
+
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F0xx_HAL_UART_EX_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+