frederic blanc
/TARGET_K64F/TARGET_Freescale/TARGET_KPSDK_MCUS/TARGET_KPSDK_CODE/hal/adc/fsl_adc_hal.h substitute line 894 extern } by }
Fork of
mbed
by 
mbed official
Diff: TARGET_NUCLEO_F401RE/stm32f4xx_hal_dma2d.h
- Revision:
- 77:869cf507173a
- Child:
- 81:7d30d6019079
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/TARGET_NUCLEO_F401RE/stm32f4xx_hal_dma2d.h Fri Feb 14 14:36:43 2014 +0000
@@ -0,0 +1,501 @@
+/**
+ ******************************************************************************
+ * @file stm32f4xx_hal_dma2d.h
+ * @author MCD Application Team
+ * @version V1.0.0RC2
+ * @date 04-February-2014
+ * @brief Header file of DMA2D HAL module.
+ ******************************************************************************
+ * @attention
+ *
+ * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted provided that the following conditions are met:
+ * 1. Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ * 3. Neither the name of STMicroelectronics nor the names of its contributors
+ * may be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ ******************************************************************************
+ */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_DMA2D_H
+#define __STM32F4xx_HAL_DMA2D_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+#if defined(STM32F429xx) || defined(STM32F439xx)
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f4xx_hal_def.h"
+
+/** @addtogroup STM32F4xx_HAL_Driver
+ * @{
+ */
+
+/** @addtogroup DMA2D
+ * @{
+ */
+
+/* Exported types ------------------------------------------------------------*/
+
+#define MAX_DMA2D_LAYER 2
+
+/**
+ * @brief DMA2D color Structure definition
+ */
+typedef struct
+{
+ uint32_t Blue; /*!< Configures the blue value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint32_t Green; /*!< Configures the green value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+ uint32_t Red; /*!< Configures the red value.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+} DMA2D_ColorTypeDef;
+
+/**
+ * @brief DMA2D CLUT Structure definition
+ */
+typedef struct
+{
+ uint32_t *pCLUT; /*!< Configures the DMA2D CLUT memory address. */
+
+ uint32_t CLUTColorMode; /*!< configures the DMA2D CLUT color mode.
+ This parameter can be one value of @ref DMA2D_CLUT_CM */
+
+ uint32_t Size; /*!< configures the DMA2D CLUT size.
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+} DMA2D_CLUTCfgTypeDef;
+
+/**
+ * @brief DMA2D Init structure definition
+ */
+typedef struct
+{
+ uint32_t Mode; /*!< configures the DMA2D transfer mode.
+ This parameter can be one value of @ref DMA2D_Mode */
+
+ uint32_t ColorMode; /*!< configures the color format of the output image.
+ This parameter can be one value of @ref DMA2D_Color_Mode */
+
+ uint32_t OutputOffset; /*!< Specifies the Offset value.
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */
+
+} DMA2D_InitTypeDef;
+
+/**
+ * @brief DMA2D Layer structure definition
+ */
+typedef struct
+{
+
+
+ uint32_t InputOffset; /*!< configures the DMA2D foreground offset.
+ This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */
+
+ uint32_t InputColorMode; /*!< configures the DMA2D foreground color mode .
+ This parameter can be one value of @ref DMA2D_Input_Color_Mode */
+
+ uint32_t AlphaMode; /*!< configures the DMA2D foreground alpha mode.
+ This parameter can be one value of @ref DMA2D_ALPHA_MODE */
+
+ uint32_t InputAlpha; /*!< Specifies the DMA2D foreground alpha value
+ This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */
+
+} DMA2D_LayerCfgTypeDef;
+
+/**
+ * @brief HAL DMA2D State structures definition
+ */
+typedef enum
+{
+ HAL_DMA2D_STATE_RESET = 0x00, /*!< DMA2D not yet initialized or disabled */
+ HAL_DMA2D_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */
+ HAL_DMA2D_STATE_BUSY = 0x02, /*!< an internal process is ongoing */
+ HAL_DMA2D_STATE_TIMEOUT = 0x03, /*!< Timeout state */
+ HAL_DMA2D_STATE_ERROR = 0x04, /*!< DMA2D state error */
+ HAL_DMA2D_STATE_SUSPEND = 0x05 /*!< DMA2D process is suspended */
+
+}HAL_DMA2D_StateTypeDef;
+
+/**
+ * @brief DMA2D handle Structure definition
+ */
+typedef struct __DMA2D_HandleTypeDef
+{
+ DMA2D_TypeDef *Instance; /*!< DMA2D Register base address */
+
+ DMA2D_InitTypeDef Init; /*!< DMA2D communication parameters */
+
+ void (* XferCpltCallback)(struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D transfer complete callback */
+
+ void (* XferErrorCallback)(struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D transfer error callback */
+
+ DMA2D_LayerCfgTypeDef LayerCfg[MAX_DMA2D_LAYER]; /*!< DMA2D Layers parameters */
+
+ HAL_LockTypeDef Lock; /*!< DMA2D Lock */
+
+ __IO HAL_DMA2D_StateTypeDef State; /*!< DMA2D transfer state */
+
+ __IO uint32_t ErrorCode; /*!< DMA2D Error code */
+
+} DMA2D_HandleTypeDef;
+
+
+/* Exported constants --------------------------------------------------------*/
+
+/** @defgroup DMA2D_Exported_Constants
+ * @{
+ */
+
+/** @defgroup DMA2D_Layer
+ * @{
+ */
+#define IS_DMA2D_LAYER(LAYER) ((LAYER) <= MAX_DMA2D_LAYER)
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Error_Code
+ * @{
+ */
+#define HAL_DMA2D_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */
+#define HAL_DMA2D_ERROR_TE ((uint32_t)0x00000001) /*!< Transfer error */
+#define HAL_DMA2D_ERROR_CE ((uint32_t)0x00000002) /*!< Configuration error */
+#define HAL_DMA2D_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Mode
+ * @{
+ */
+#define DMA2D_M2M ((uint32_t)0x00000000) /*!< DMA2D memory to memory transfer mode */
+#define DMA2D_M2M_PFC ((uint32_t)0x00010000) /*!< DMA2D memory to memory with pixel format conversion transfer mode */
+#define DMA2D_M2M_BLEND ((uint32_t)0x00020000) /*!< DMA2D memory to memory with blending transfer mode */
+#define DMA2D_R2M ((uint32_t)0x00030000) /*!< DMA2D register to memory transfer mode */
+
+#define IS_DMA2D_MODE(MODE) (((MODE) == DMA2D_M2M) || ((MODE) == DMA2D_M2M_PFC) || \
+ ((MODE) == DMA2D_M2M_BLEND) || ((MODE) == DMA2D_R2M))
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Color_Mode
+ * @{
+ */
+#define DMA2D_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 DMA2D color mode */
+#define DMA2D_RGB888 ((uint32_t)0x00000001) /*!< RGB888 DMA2D color mode */
+#define DMA2D_RGB565 ((uint32_t)0x00000002) /*!< RGB565 DMA2D color mode */
+#define DMA2D_ARGB1555 ((uint32_t)0x00000003) /*!< ARGB1555 DMA2D color mode */
+#define DMA2D_ARGB4444 ((uint32_t)0x00000004) /*!< ARGB4444 DMA2D color mode */
+
+#define IS_DMA2D_CMODE(MODE_ARGB) (((MODE_ARGB) == DMA2D_ARGB8888) || ((MODE_ARGB) == DMA2D_RGB888) || \
+ ((MODE_ARGB) == DMA2D_RGB565) || ((MODE_ARGB) == DMA2D_ARGB1555) || \
+ ((MODE_ARGB) == DMA2D_ARGB4444))
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_COLOR_VALUE
+ * @{
+ */
+
+#define COLOR_VALUE ((uint32_t)0x000000FF) /*!< color value mask */
+
+#define IS_DMA2D_ALPHA_VALUE(ALPHA_VALUE) ((ALPHA_VALUE) <= COLOR_VALUE)
+#define IS_DMA2D_COLOR(COLOR) ((COLOR) <= COLOR_VALUE)
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_SIZE
+ * @{
+ */
+#define DMA2D_PIXEL (DMA2D_NLR_PL >> 16) /*!< DMA2D pixel per line */
+#define DMA2D_LINE DMA2D_NLR_NL /*!< DMA2D number of line */
+
+#define IS_DMA2D_LINE(LINE) ((LINE) <= DMA2D_LINE)
+#define IS_DMA2D_PIXEL(PIXEL) ((PIXEL) <= DMA2D_PIXEL)
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_OFFSET
+ * @{
+ */
+#define DMA2D_OFFSET DMA2D_FGOR_LO /*!< Line Offset */
+
+#define IS_DMA2D_OFFSET(OOFFSET) ((OOFFSET) <= DMA2D_OFFSET)
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Input_Color_Mode
+ * @{
+ */
+#define CM_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 color mode */
+#define CM_RGB888 ((uint32_t)0x00000001) /*!< RGB888 color mode */
+#define CM_RGB565 ((uint32_t)0x00000002) /*!< RGB565 color mode */
+#define CM_ARGB1555 ((uint32_t)0x00000003) /*!< ARGB1555 color mode */
+#define CM_ARGB4444 ((uint32_t)0x00000004) /*!< ARGB4444 color mode */
+#define CM_L8 ((uint32_t)0x00000005) /*!< L8 color mode */
+#define CM_AL44 ((uint32_t)0x00000006) /*!< AL44 color mode */
+#define CM_AL88 ((uint32_t)0x00000007) /*!< AL88 color mode */
+#define CM_L4 ((uint32_t)0x00000008) /*!< L4 color mode */
+#define CM_A8 ((uint32_t)0x00000009) /*!< A8 color mode */
+#define CM_A4 ((uint32_t)0x0000000A) /*!< A4 color mode */
+
+#define IS_DMA2D_INPUT_COLOR_MODE(INPUT_CM) (((INPUT_CM) == CM_ARGB8888) || ((INPUT_CM) == CM_RGB888) || \
+ ((INPUT_CM) == CM_RGB565) || ((INPUT_CM) == CM_ARGB1555) || \
+ ((INPUT_CM) == CM_ARGB4444) || ((INPUT_CM) == CM_L8) || \
+ ((INPUT_CM) == CM_AL44) || ((INPUT_CM) == CM_AL88) || \
+ ((INPUT_CM) == CM_L4) || ((INPUT_CM) == CM_A8) || \
+ ((INPUT_CM) == CM_A4))
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_ALPHA_MODE
+ * @{
+ */
+#define DMA2D_NO_MODIF_ALPHA ((uint32_t)0x00000000) /*!< No modification of the alpha channel value */
+#define DMA2D_REPLACE_ALPHA ((uint32_t)0x00000001) /*!< Replace original alpha channel value by programmed alpha value */
+#define DMA2D_COMBINE_ALPHA ((uint32_t)0x00000002) /*!< Replace original alpha channel value by programmed alpha value
+ with original alpha channel value */
+
+#define IS_DMA2D_ALPHA_MODE(AlphaMode) (((AlphaMode) == DMA2D_NO_MODIF_ALPHA) || \
+ ((AlphaMode) == DMA2D_REPLACE_ALPHA) || \
+ ((AlphaMode) == DMA2D_COMBINE_ALPHA))
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_CLUT_CM
+ * @{
+ */
+#define DMA2D_CCM_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 DMA2D C-LUT color mode */
+#define DMA2D_CCM_RGB888 ((uint32_t)0x00000001) /*!< RGB888 DMA2D C-LUT color mode */
+
+#define IS_DMA2D_CLUT_CM(CLUT_CM) (((CLUT_CM) == DMA2D_CCM_ARGB8888) || ((CLUT_CM) == DMA2D_CCM_RGB888))
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_CLUT_SIZE
+ * @{
+ */
+#define DMA2D_CLUT_SIZE (DMA2D_FGPFCCR_CS >> 8) /*!< DMA2D C-LUT size */
+
+#define IS_DMA2D_CLUT_SIZE(CLUT_SIZE) ((CLUT_SIZE) <= DMA2D_CLUT_SIZE)
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_DeadTime
+ * @{
+ */
+#define LINE_WATERMARK DMA2D_LWR_LW
+
+#define IS_DMA2D_LineWatermark(LineWatermark) ((LineWatermark) <= LINE_WATERMARK)
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Interrupts
+ * @{
+ */
+#define DMA2D_IT_CE DMA2D_CR_CEIE /*!< Configuration Error Interrupt */
+#define DMA2D_IT_CTC DMA2D_CR_CTCIE /*!< C-LUT Transfer Complete Interrupt */
+#define DMA2D_IT_CAE DMA2D_CR_CAEIE /*!< C-LUT Access Error Interrupt */
+#define DMA2D_IT_TW DMA2D_CR_TWIE /*!< Transfer Watermark Interrupt */
+#define DMA2D_IT_TC DMA2D_CR_TCIE /*!< Transfer Complete Interrupt */
+#define DMA2D_IT_TE DMA2D_CR_TEIE /*!< Transfer Error Interrupt */
+
+#define IS_DMA2D_IT(IT) (((IT) == DMA2D_IT_CTC) || ((IT) == DMA2D_IT_CAE) || \
+ ((IT) == DMA2D_IT_TW) || ((IT) == DMA2D_IT_TC) || \
+ ((IT) == DMA2D_IT_TE) || ((IT) == DMA2D_IT_CE))
+/**
+ * @}
+ */
+
+/** @defgroup DMA2D_Flag
+ * @{
+ */
+#define DMA2D_FLAG_CE DMA2D_ISR_CEIF /*!< Configuration Error Interrupt Flag */
+#define DMA2D_FLAG_CTC DMA2D_ISR_CTCIF /*!< C-LUT Transfer Complete Interrupt Flag */
+#define DMA2D_FLAG_CAE DMA2D_ISR_CAEIF /*!< C-LUT Access Error Interrupt Flag */
+#define DMA2D_FLAG_TW DMA2D_ISR_TWIF /*!< Transfer Watermark Interrupt Flag */
+#define DMA2D_FLAG_TC DMA2D_ISR_TCIF /*!< Transfer Complete Interrupt Flag */
+#define DMA2D_FLAG_TE DMA2D_ISR_TEIF /*!< Transfer Error Interrupt Flag */
+
+#define IS_DMA2D_GET_FLAG(FLAG) (((FLAG) == DMA2D_FLAG_CTC) || ((FLAG) == DMA2D_FLAG_CAE) || \
+ ((FLAG) == DMA2D_FLAG_TW) || ((FLAG) == DMA2D_FLAG_TC) || \
+ ((FLAG) == DMA2D_FLAG_TE) || ((FLAG) == DMA2D_FLAG_CE))
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+/* Exported macro ------------------------------------------------------------*/
+/**
+ * @brief Enable the DMA2D.
+ * @param __HANDLE__: DMA2D handle
+ * @retval None.
+ */
+#define __HAL_DMA2D_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA2D_CR_START)
+
+/**
+ * @brief Disable the DMA2D.
+ * @param __HANDLE__: DMA2D handle
+ * @retval None.
+ */
+#define __HAL_DMA2D_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DMA2D_CR_START)
+
+/* Interrupt & Flag management */
+/**
+ * @brief Get the DMA2D pending flags.
+ * @param __HANDLE__: DMA2D handle
+ * @param __FLAG__: Get the specified flag.
+ * This parameter can be any combination of the following values:
+ * @arg DMA2D_FLAG_CE: Configuration error flag
+ * @arg DMA2D_FLAG_CTC: C-LUT transfer complete flag
+ * @arg DMA2D_FLAG_CAE: C-LUT access error flag
+ * @arg DMA2D_FLAG_TW: Transfer Watermark flag
+ * @arg DMA2D_FLAG_TC: Transfer complete flag
+ * @arg DMA2D_FLAG_TE: Transfer error flag
+ * @retval The state of FLAG.
+ */
+#define __HAL_DMA2D_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__))
+
+/**
+ * @brief Clears the DMA2D pending flags.
+ * @param __HANDLE__: DMA2D handle
+ * @param __FLAG__: specifies the flag to clear.
+ * This parameter can be any combination of the following values:
+ * @arg DMA2D_FLAG_CE: Configuration error flag
+ * @arg DMA2D_FLAG_CTC: C-LUT transfer complete flag
+ * @arg DMA2D_FLAG_CAE: C-LUT access error flag
+ * @arg DMA2D_FLAG_TW: Transfer Watermark flag
+ * @arg DMA2D_FLAG_TC: Transfer complete flag
+ * @arg DMA2D_FLAG_TE: Transfer error flag
+ * @retval None
+ */
+#define __HAL_DMA2D_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->IFCR |= (__FLAG__))
+
+/**
+ * @brief Enables the specified DMA2D interrupts.
+ * @param __HANDLE__: DMA2D handle
+ * @param __INTERRUPT__: specifies the DMA2D interrupt sources to be enabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA2D_IT_CE: Configuration error interrupt mask
+ * @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask
+ * @arg DMA2D_IT_CAE: C-LUT access error interrupt mask
+ * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
+ * @arg DMA2D_IT_TC: Transfer complete interrupt mask
+ * @arg DMA2D_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA2D_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__))
+
+/**
+ * @brief Disables the specified DMA2D interrupts.
+ * @param __HANDLE__: DMA2D handle
+ * @param __INTERRUPT__: specifies the DMA2D interrupt sources to be disabled.
+ * This parameter can be any combination of the following values:
+ * @arg DMA2D_IT_CE: Configuration error interrupt mask
+ * @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask
+ * @arg DMA2D_IT_CAE: C-LUT access error interrupt mask
+ * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
+ * @arg DMA2D_IT_TC: Transfer complete interrupt mask
+ * @arg DMA2D_IT_TE: Transfer error interrupt mask
+ * @retval None
+ */
+#define __HAL_DMA2D_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__))
+
+/**
+ * @brief Checks whether the specified DMA2D interrupt has occurred or not.
+ * @param __HANDLE__: DMA2D handle
+ * @param __INTERRUPT__: specifies the DMA2D interrupt source to check.
+ * This parameter can be one of the following values:
+ * @arg DMA2D_IT_CE: Configuration error interrupt mask
+ * @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask
+ * @arg DMA2D_IT_CAE: C-LUT access error interrupt mask
+ * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask
+ * @arg DMA2D_IT_TC: Transfer complete interrupt mask
+ * @arg DMA2D_IT_TE: Transfer error interrupt mask
+ * @retval The state of INTERRUPT.
+ */
+#define __HAL_DMA2D_IT_STATUS(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__))
+
+/* Exported functions --------------------------------------------------------*/
+
+/* Initialization and de-initialization functions *******************************/
+HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_DeInit (DMA2D_HandleTypeDef *hdma2d);
+__weak void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d);
+__weak void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d);
+
+/* IO operation functions *******************************************************/
+HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Heigh);
+HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Heigh);
+HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Heigh);
+HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Heigh);
+HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d);
+HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout);
+void HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d);
+
+/* Peripheral Control functions *************************************************/
+HAL_StatusTypeDef HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_DisableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx);
+HAL_StatusTypeDef HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line);
+
+/* Peripheral State functions ***************************************************/
+HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d);
+uint32_t HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d);
+
+#endif /* STM32F429xx || STM32F439xx */
+
+/**
+ * @}
+ */
+
+/**
+ * @}
+ */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_DMA2D_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/