test MAX31850

Dependencies:   OneWireFB mbed

Revision:
4:031e71e61e80
Parent:
3:b4277f7c538e
diff -r b4277f7c538e -r 031e71e61e80 OneWire/onewire.h
--- a/OneWire/onewire.h	Mon Jun 02 13:17:18 2014 +0000
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,79 +0,0 @@
-/**
-* @file onewire.h
-* @brief library 1-Wire(www.maxim-ic.com)
-* @author Maciej Rajtar (Published 10 May 2010 www.mbed.org)
-* @author Frederic BLANC (Published 01/03/2012 www.mbed.org)
-*/
-
-#ifndef _onewire_
-#define _onewire_
-#include "DS2450.h"
-#include "DS18X20.h"
-#include "MAX31850.h"
-#include "crc8.h"
-#include "crc16.h"
-//#define DEBUG 1
-//#define DEBUG_L1 1
-#define ONEWIRE_PIN  p21
-
-#define MAXSENSORS 8
-#define MAXBUS 4
-// rom-code size including CRC
-#define OW_ROMCODE_SIZE 8
-
-#define OW_OK          0x00
-#define OW_ERROR       0x01
-#define OW_START_FAIL  0x02
-#define OW_ERROR_CRC   0x03
-#define OW_ERROR_BAD_ID 0x04
-#define OW_BUSY          0x05
-
-#define OW_MATCH_ROM    0x55
-#define OW_SKIP_ROM     0xCC
-#define OW_SEARCH_ROM   0xF0
-#define OW_READ_ROM     0x33
-#define OW_CONDITIONAL_SEARCH     0xEC
-#define OW_OVERDRIVE_SKIP_ROM     0x3C
-#define OW_OVERDRIVE_MATCH_ROM    0x69
-
-#define OW_SHORT_CIRCUIT   0xFF
-#define OW_SEARCH_FIRST    0xFF        // start new search
-#define OW_PRESENCE_ERR    0x01
-#define OW_DATA_ERR        0xFE
-#define OW_LAST_DEVICE     0x00        // last device found
-//            0x01 ... 0x40: continue searching
-
-
-
-char* ow_show_id( uint8_t id[],char *text); 
-uint64_t uint64_id( uint8_t id[]);
-
-uint8_t search_sensors(uint8_t *nSensors,uint8_t id[][OW_ROMCODE_SIZE] );
-uint8_t search_sensors(uint8_t n,uint8_t *nSensors,uint8_t gSensorIDs[][MAXSENSORS][OW_ROMCODE_SIZE] );
-uint8_t ow_PullUp(void);
-uint8_t ow_PullUp(uint8_t n);
-
-
-uint8_t ow_test_pin (void);
-uint8_t ow_test_pin (uint8_t n);
-uint8_t ow_reset(void);
-uint8_t ow_reset(uint8_t n);
-uint8_t ow_rom_search( uint8_t diff, uint8_t id[] );
-uint8_t ow_rom_search(uint8_t n, uint8_t diff, uint8_t id[] );
-uint8_t ow_command( uint8_t command, uint8_t id[] );
-uint8_t ow_command(uint8_t n, uint8_t command, uint8_t id[] );
-uint8_t ow_find_sensor(uint8_t *diff, uint8_t id[]);
-uint8_t ow_find_sensor(uint8_t n,uint8_t *diff, uint8_t id[]);
-uint8_t ow_parasite_enable(void);
-uint8_t ow_parasite_enable(uint8_t n);
-uint8_t ow_parasite_disable(void);
-uint8_t ow_parasite_disable(uint8_t n);
-uint8_t ow_bit_io( uint8_t b );
-uint8_t ow_bit_io(uint8_t n, uint8_t b);
-uint8_t ow_byte_wr( uint8_t b );
-uint8_t ow_byte_wr(uint8_t n, uint8_t b );
-uint8_t ow_byte_rd( void );
-uint8_t ow_byte_rd( uint8_t n);
-
-
-#endif
\ No newline at end of file