Revision 2:00c97f5dfeaf, committed 2015-02-12

Comitter:

fblanc

Date:

Thu Feb 12 13:00:53 2015 +0000

Parent:

1:8e41a7b03f45

Commit message:

test ok

Changed in this revision

--- a/MFRC522.lib	Wed Dec 18 00:46:40 2013 +0000
+++ b/MFRC522.lib	Thu Feb 12 13:00:53 2015 +0000
@@ -1,1 +1,1 @@
-http://mbed.org/users/AtomX/code/MFRC522/#efd786b99a72
+http://developer.mbed.org/users/fblanc/code/MFRC522/#ffb53e78f40f

--- a/main.cpp	Wed Dec 18 00:46:40 2013 +0000
+++ b/main.cpp	Thu Feb 12 13:00:53 2015 +0000
@@ -1,23 +1,31 @@
+/**
+ * @ version Forks dec 2014
+ * @date 27/12/2014
+ * @author F.BLANC
+ */
+#define VERSION "RFID_2014_12_27"
 #include "mbed.h"
 #include "MFRC522.h"
 
 #if defined(TARGET_KL25Z)
 
 /* KL25Z Pins for MFRC522 SPI interface */
-#define SPI_MOSI    PTC6
-#define SPI_MISO    PTC7
-#define SPI_SCLK    PTC5
-#define SPI_CS      PTC4
+#define CIBLE "KL25Z"
+#define SPI_MOSI    PTD2
+#define SPI_MISO    PTD3
+#define SPI_SCLK    PTD1
+#define SPI_CS      PTD0
 
 /* KL25Z Pin for MFRC522 reset */
-#define MF_RESET    PTC3
+#define MF_RESET    PTD5
 
 /* KL25Z Pins for UART Debug port */
-#define UART_RX     PTA1
-#define UART_TX     PTA2
-
+//#define UART_RX     PTA1
+//#define UART_TX     PTA2
+#define UART_RX     USBRX
+#define UART_TX     USBTX
 #elif defined(TARGET_LPC11U24)
-
+#define CIBLE "LPC11U24"
 /* LPC11U24 Pins for MFRC522 SPI interface */
 #define SPI_MOSI    P0_9
 #define SPI_MISO    P0_8
@@ -55,52 +63,53 @@
  */
 void DumpToSerial(MFRC522::Uid *uid)
 {
-  MFRC522::MIFARE_Key key;
+    MFRC522::MIFARE_Key key;
 
-  // UID
-  printf("Card UID: ");
-  for (uint8_t i = 0; i < uid->size; i++)
-  {
-    printf(" %X02", uid->uidByte[i]);
-  }
-  printf("\n\r");
+    // UID
+    printf("Card UID: ");
+    for (uint8_t i = 0; i < uid->size; i++) {
+        printf(" %X02", uid->uidByte[i]);
+    }
+    printf("\n\r");
 
-  // PICC type
-  uint8_t piccType = RfChip.PICC_GetType(uid->sak);
-  printf("PICC Type: %s \n\r", RfChip.PICC_GetTypeName(piccType));
+    // PICC type
+    uint8_t piccType = RfChip.PICC_GetType(uid->sak);
+    printf("PICC Type: %s \n\r", RfChip.PICC_GetTypeName(piccType));
 
 
-  // Dump contents
-  switch (piccType)
-  {
-    case MFRC522::PICC_TYPE_MIFARE_MINI:
-    case MFRC522::PICC_TYPE_MIFARE_1K:
-    case MFRC522::PICC_TYPE_MIFARE_4K:
-      // All keys are set to FFFFFFFFFFFFh at chip delivery from the factory.
-      for (uint8_t i = 0; i < 6; i++) { key.keyByte[i] = 0xFF; }
-      DumpMifareClassicToSerial(uid, piccType, &key);
-      break;
-
-    case MFRC522::PICC_TYPE_MIFARE_UL:
-      DumpMifareUltralightToSerial();
-      break;
+    // Dump contents
+    switch (piccType) {
+        case MFRC522::PICC_TYPE_MIFARE_MINI:
+        case MFRC522::PICC_TYPE_MIFARE_1K:
+        case MFRC522::PICC_TYPE_MIFARE_4K:
+            // All keys are set to FFFFFFFFFFFFh at chip delivery from the factory.
+            for (uint8_t i = 0; i < 6; i++) {
+                key.keyByte[i] = 0xFF;
+            }
+            DumpMifareClassicToSerial(uid, piccType, &key);
+            break;
 
-    case MFRC522::PICC_TYPE_ISO_14443_4:
-    case MFRC522::PICC_TYPE_ISO_18092:
-    case MFRC522::PICC_TYPE_MIFARE_PLUS:
-    case MFRC522::PICC_TYPE_TNP3XXX:
-      printf("Dumping memory contents not implemented for that PICC type. \n\r");
-      break;
+        case MFRC522::PICC_TYPE_MIFARE_UL:
+            DumpMifareUltralightToSerial();
+            break;
+        case MFRC522::PICC_TYPE_TNP3XXX:
+            printf("Dumping memory contents not implemented for that PICC type. \n\r");
+            break;
+        case MFRC522::PICC_TYPE_ISO_14443_4:
+        case MFRC522::PICC_TYPE_ISO_18092:
+        case MFRC522::PICC_TYPE_MIFARE_PLUS:
+            printf("Dumping memory contents not implemented for that PICC type. \n\r");
+            break;
 
-    case MFRC522::PICC_TYPE_UNKNOWN:
-    case MFRC522::PICC_TYPE_NOT_COMPLETE:
-    default:
-      break; // No memory dump here
-  }
+        case MFRC522::PICC_TYPE_UNKNOWN:
+        case MFRC522::PICC_TYPE_NOT_COMPLETE:
+        default:
+            break; // No memory dump here
+    }
 
-  printf("\n\r");
+    printf("\n\r");
 
-  RfChip.PICC_HaltA(); // Already done if it was a MIFARE Classic PICC.
+    RfChip.PICC_HaltA(); // Already done if it was a MIFARE Classic PICC.
 } // End PICC_DumpToSerial()
 
 /**
@@ -109,42 +118,39 @@
  */
 void DumpMifareClassicToSerial(MFRC522::Uid *uid, uint8_t piccType, MFRC522::MIFARE_Key *key)
 {
-  uint8_t no_of_sectors = 0;
-  switch (piccType)
-  {
-    case MFRC522::PICC_TYPE_MIFARE_MINI:
-      // Has 5 sectors * 4 blocks/sector * 16 bytes/block = 320 bytes.
-      no_of_sectors = 5;
-      break;
+    uint8_t no_of_sectors = 0;
+    switch (piccType) {
+        case MFRC522::PICC_TYPE_MIFARE_MINI:
+            // Has 5 sectors * 4 blocks/sector * 16 bytes/block = 320 bytes.
+            no_of_sectors = 5;
+            break;
 
-    case MFRC522::PICC_TYPE_MIFARE_1K:
-      // Has 16 sectors * 4 blocks/sector * 16 bytes/block = 1024 bytes.
-      no_of_sectors = 16;
-      break;
+        case MFRC522::PICC_TYPE_MIFARE_1K:
+            // Has 16 sectors * 4 blocks/sector * 16 bytes/block = 1024 bytes.
+            no_of_sectors = 16;
+            break;
 
-    case MFRC522::PICC_TYPE_MIFARE_4K:
-      // Has (32 sectors * 4 blocks/sector + 8 sectors * 16 blocks/sector) * 16 bytes/block = 4096 bytes.
-      no_of_sectors = 40;
-      break;
+        case MFRC522::PICC_TYPE_MIFARE_4K:
+            // Has (32 sectors * 4 blocks/sector + 8 sectors * 16 blocks/sector) * 16 bytes/block = 4096 bytes.
+            no_of_sectors = 40;
+            break;
 
-    default:
-      // Should not happen. Ignore.
-      break;
-  }
+        default:
+            // Should not happen. Ignore.
+            break;
+    }
 
-  // Dump sectors, highest address first.
-  if (no_of_sectors)
-  {
-    printf("Sector  Block   0   1   2   3   4   5   6   7   8   9  10  11  12  13  14  15  AccessBits \n\r");
-    printf("----------------------------------------------------------------------------------------- \n\r");
-    for (uint8_t i = no_of_sectors - 1; i > 0; i--)
-    {
-      DumpMifareClassicSectorToSerial(uid, key, i);
+    // Dump sectors, highest address first.
+    if (no_of_sectors) {
+        printf("Sector  Block   0   1   2   3   4   5   6   7   8   9  10  11  12  13  14  15  AccessBits \n\r");
+        printf("----------------------------------------------------------------------------------------- \n\r");
+        for (uint8_t i = no_of_sectors - 1; i > 0; i--) {
+            DumpMifareClassicSectorToSerial(uid, key, i);
+        }
     }
-  }
 
-  RfChip.PICC_HaltA(); // Halt the PICC before stopping the encrypted session.
-  RfChip.PCD_StopCrypto1();
+    RfChip.PICC_HaltA(); // Halt the PICC before stopping the encrypted session.
+    RfChip.PCD_StopCrypto1();
 } // End PICC_DumpMifareClassicToSerial()
 
 /**
@@ -154,147 +160,131 @@
  */
 void DumpMifareClassicSectorToSerial(MFRC522::Uid *uid, MFRC522::MIFARE_Key *key, uint8_t sector)
 {
-  uint8_t status;
-  uint8_t firstBlock;    // Address of lowest address to dump actually last block dumped)
-  uint8_t no_of_blocks;    // Number of blocks in sector
-  bool    isSectorTrailer; // Set to true while handling the "last" (ie highest address) in the sector.
-
-  // The access bits are stored in a peculiar fashion.
-  // There are four groups:
-  //    g[3]  Access bits for the sector trailer, block 3 (for sectors 0-31) or block 15 (for sectors 32-39)
-  //    g[2]  Access bits for block 2 (for sectors 0-31) or blocks 10-14 (for sectors 32-39)
-  //    g[1]  Access bits for block 1 (for sectors 0-31) or blocks 5-9 (for sectors 32-39)
-  //    g[0]  Access bits for block 0 (for sectors 0-31) or blocks 0-4 (for sectors 32-39)
-  // Each group has access bits [C1 C2 C3]. In this code C1 is MSB and C3 is LSB.
-  // The four CX bits are stored together in a nible cx and an inverted nible cx_.
-  uint8_t c1, c2, c3;      // Nibbles
-  uint8_t c1_, c2_, c3_;   // Inverted nibbles
-  bool    invertedError = false;   // True if one of the inverted nibbles did not match
-  uint8_t g[4];            // Access bits for each of the four groups.
-  uint8_t group;           // 0-3 - active group for access bits
-  bool    firstInGroup;    // True for the first block dumped in the group
+    uint8_t status;
+    uint8_t firstBlock;    // Address of lowest address to dump actually last block dumped)
+    uint8_t no_of_blocks;    // Number of blocks in sector
+    bool    isSectorTrailer; // Set to true while handling the "last" (ie highest address) in the sector.
 
-  // Determine position and size of sector.
-  if (sector < 32)
-  { // Sectors 0..31 has 4 blocks each
-    no_of_blocks = 4;
-    firstBlock = sector * no_of_blocks;
-  }
-  else if (sector < 40)
-  { // Sectors 32-39 has 16 blocks each
-    no_of_blocks = 16;
-    firstBlock = 128 + (sector - 32) * no_of_blocks;
-  }
-  else
-  { // Illegal input, no MIFARE Classic PICC has more than 40 sectors.
-    return;
-  }
+    // The access bits are stored in a peculiar fashion.
+    // There are four groups:
+    //    g[3]  Access bits for the sector trailer, block 3 (for sectors 0-31) or block 15 (for sectors 32-39)
+    //    g[2]  Access bits for block 2 (for sectors 0-31) or blocks 10-14 (for sectors 32-39)
+    //    g[1]  Access bits for block 1 (for sectors 0-31) or blocks 5-9 (for sectors 32-39)
+    //    g[0]  Access bits for block 0 (for sectors 0-31) or blocks 0-4 (for sectors 32-39)
+    // Each group has access bits [C1 C2 C3]. In this code C1 is MSB and C3 is LSB.
+    // The four CX bits are stored together in a nible cx and an inverted nible cx_.
+    uint8_t c1, c2, c3;      // Nibbles
+    uint8_t c1_, c2_, c3_;   // Inverted nibbles
+    bool    invertedError = false;   // True if one of the inverted nibbles did not match
+    uint8_t g[4];            // Access bits for each of the four groups.
+    uint8_t group;           // 0-3 - active group for access bits
+    bool    firstInGroup;    // True for the first block dumped in the group
 
-  // Dump blocks, highest address first.
-  uint8_t byteCount;
-  uint8_t buffer[18];
-  uint8_t blockAddr;
-  isSectorTrailer = true;
-  for (uint8_t blockOffset = no_of_blocks - 1; blockOffset > 0; blockOffset--)
-  {
-    blockAddr = firstBlock + blockOffset;
-
-    // Sector number - only on first line
-    if (isSectorTrailer)
-    {
-      printf("  %2d   ", sector);
-    }
-    else
-    {
-      printf("       ");
+    // Determine position and size of sector.
+    if (sector < 32) {
+        // Sectors 0..31 has 4 blocks each
+        no_of_blocks = 4;
+        firstBlock = sector * no_of_blocks;
+    } else if (sector < 40) {
+        // Sectors 32-39 has 16 blocks each
+        no_of_blocks = 16;
+        firstBlock = 128 + (sector - 32) * no_of_blocks;
+    } else {
+        // Illegal input, no MIFARE Classic PICC has more than 40 sectors.
+        return;
     }
 
-    // Block number
-    printf(" %3d  ", blockAddr);
+    // Dump blocks, highest address first.
+    uint8_t byteCount;
+    uint8_t buffer[18];
+    uint8_t blockAddr;
+    isSectorTrailer = true;
+    for (uint8_t blockOffset = no_of_blocks - 1; blockOffset > 0; blockOffset--) {
+        blockAddr = firstBlock + blockOffset;
 
-    // Establish encrypted communications before reading the first block
-    if (isSectorTrailer)
-    {
-      status = RfChip.PCD_Authenticate(MFRC522::PICC_CMD_MF_AUTH_KEY_A, firstBlock, key, uid);
-      if (status != MFRC522::STATUS_OK)
-      {
-        printf("PCD_Authenticate() failed: %s \r\n", RfChip.GetStatusCodeName(status));
-        return;
-      }
-    }
+        // Sector number - only on first line
+        if (isSectorTrailer) {
+            printf("  %2d   ", sector);
+        } else {
+            printf("       ");
+        }
+
+        // Block number
+        printf(" %3d  ", blockAddr);
 
-    // Read block
-    byteCount = sizeof(buffer);
-    status = RfChip.MIFARE_Read(blockAddr, buffer, &byteCount);
-    if (status != MFRC522::STATUS_OK)
-    {
-      printf("MIFARE_Read() failed: %s \r\n", RfChip.GetStatusCodeName(status));
-      continue;
-    }
+        // Establish encrypted communications before reading the first block
+        if (isSectorTrailer) {
+            status = RfChip.PCD_Authenticate(MFRC522::PICC_CMD_MF_AUTH_KEY_A, firstBlock, key, uid);
+            if (status != MFRC522::STATUS_OK) {
+                printf("PCD_Authenticate() failed: %s \r\n", RfChip.GetStatusCodeName(status));
+                return;
+            }
+        }
 
-    // Dump data
-    for (uint8_t index = 0; index < 16; index++)
-    {
-      printf(" %3d", buffer[index]);
+        // Read block
+        byteCount = sizeof(buffer);
+        status = RfChip.MIFARE_Read(blockAddr, buffer, &byteCount);
+        if (status != MFRC522::STATUS_OK) {
+            printf("MIFARE_Read() failed: %s \r\n", RfChip.GetStatusCodeName(status));
+            continue;
+        }
+
+        // Dump data
+        for (uint8_t index = 0; index < 16; index++) {
+            printf(" %3d", buffer[index]);
 //      if ((index % 4) == 3)
 //      {
 //        printf(" ");
 //      }
-    }
+        }
+
+        // Parse sector trailer data
+        if (isSectorTrailer) {
+            c1  = buffer[7] >> 4;
+            c2  = buffer[8] & 0xF;
+            c3  = buffer[8] >> 4;
+            c1_ = buffer[6] & 0xF;
+            c2_ = buffer[6] >> 4;
+            c3_ = buffer[7] & 0xF;
+            invertedError = (c1 != (~c1_ & 0xF)) || (c2 != (~c2_ & 0xF)) || (c3 != (~c3_ & 0xF));
+
+            g[0] = ((c1 & 1) << 2) | ((c2 & 1) << 1) | ((c3 & 1) << 0);
+            g[1] = ((c1 & 2) << 1) | ((c2 & 2) << 0) | ((c3 & 2) >> 1);
+            g[2] = ((c1 & 4) << 0) | ((c2 & 4) >> 1) | ((c3 & 4) >> 2);
+            g[3] = ((c1 & 8) >> 1) | ((c2 & 8) >> 2) | ((c3 & 8) >> 3);
+            isSectorTrailer = false;
+        }
 
-    // Parse sector trailer data
-    if (isSectorTrailer)
-    {
-      c1  = buffer[7] >> 4;
-      c2  = buffer[8] & 0xF;
-      c3  = buffer[8] >> 4;
-      c1_ = buffer[6] & 0xF;
-      c2_ = buffer[6] >> 4;
-      c3_ = buffer[7] & 0xF;
-      invertedError = (c1 != (~c1_ & 0xF)) || (c2 != (~c2_ & 0xF)) || (c3 != (~c3_ & 0xF));
+        // Which access group is this block in?
+        if (no_of_blocks == 4) {
+            group = blockOffset;
+            firstInGroup = true;
+        } else {
+            group = blockOffset / 5;
+            firstInGroup = (group == 3) || (group != (blockOffset + 1) / 5);
+        }
 
-      g[0] = ((c1 & 1) << 2) | ((c2 & 1) << 1) | ((c3 & 1) << 0);
-      g[1] = ((c1 & 2) << 1) | ((c2 & 2) << 0) | ((c3 & 2) >> 1);
-      g[2] = ((c1 & 4) << 0) | ((c2 & 4) >> 1) | ((c3 & 4) >> 2);
-      g[3] = ((c1 & 8) >> 1) | ((c2 & 8) >> 2) | ((c3 & 8) >> 3);
-      isSectorTrailer = false;
+        if (firstInGroup) {
+            // Print access bits
+            printf("   [ %d %d %d ] ", (g[group] >> 2) & 1, (g[group] >> 1) & 1, (g[group] >> 0) & 1);
+            if (invertedError) {
+                printf(" Inverted access bits did not match! ");
+            }
+        }
+
+        if (group != 3 && (g[group] == 1 || g[group] == 6)) {
+            // Not a sector trailer, a value block
+            printf(" Addr = 0x%02X, Value = 0x%02X%02X%02X%02X", buffer[12],
+                   buffer[3],
+                   buffer[2],
+                   buffer[1],
+                   buffer[0]);
+        }
+
+        printf("\n\r");
     }
 
-    // Which access group is this block in?
-    if (no_of_blocks == 4)
-    {
-      group = blockOffset;
-      firstInGroup = true;
-    }
-    else
-    {
-      group = blockOffset / 5;
-      firstInGroup = (group == 3) || (group != (blockOffset + 1) / 5);
-    }
-
-    if (firstInGroup)
-    {
-      // Print access bits
-      printf("   [ %d %d %d ] ", (g[group] >> 2) & 1, (g[group] >> 1) & 1, (g[group] >> 0) & 1);
-      if (invertedError)
-      {
-        printf(" Inverted access bits did not match! ");
-      }
-    }
-
-    if (group != 3 && (g[group] == 1 || g[group] == 6))
-    { // Not a sector trailer, a value block
-      printf(" Addr = 0x%02X, Value = 0x%02X%02X%02X%02X", buffer[12],
-                                                           buffer[3],
-                                                           buffer[2],
-                                                           buffer[1],
-                                                           buffer[0]);
-    }
-
-    printf("\n\r");
-  }
-
-  return;
+    return;
 } // End PICC_DumpMifareClassicSectorToSerial()
 
 /**
@@ -302,81 +292,74 @@
  */
 void DumpMifareUltralightToSerial(void)
 {
-  uint8_t status;
-  uint8_t byteCount;
-  uint8_t buffer[18];
-  uint8_t i;
+    uint8_t status;
+    uint8_t byteCount;
+    uint8_t buffer[18];
+    uint8_t i;
 
-  printf("Page   0  1  2  3");
-  // Try the mpages of the original Ultralight. Ultralight C has more pages.
-  for (uint8_t page = 0; page < 16; page +=4)
-  {
-    // Read pages
-    byteCount = sizeof(buffer);
-    status = RfChip.MIFARE_Read(page, buffer, &byteCount);
-    if (status != MFRC522::STATUS_OK)
-    {
-      printf("MIFARE_Read() failed: %s \n\r", RfChip.GetStatusCodeName(status));
-      break;
-    }
+    printf("Page   0  1  2  3");
+    // Try the mpages of the original Ultralight. Ultralight C has more pages.
+    for (uint8_t page = 0; page < 16; page +=4) {
+        // Read pages
+        byteCount = sizeof(buffer);
+        status = RfChip.MIFARE_Read(page, buffer, &byteCount);
+        if (status != MFRC522::STATUS_OK) {
+            printf("MIFARE_Read() failed: %s \n\r", RfChip.GetStatusCodeName(status));
+            break;
+        }
 
-    // Dump data
-    for (uint8_t offset = 0; offset < 4; offset++)
-    {
-      i = page + offset;
-      printf(" %2d  ", i); // Pad with spaces
-      for (uint8_t index = 0; index < 4; index++)
-      {
-        i = 4 * offset + index;
-        printf(" %02X ", buffer[i]);
-      }
+        // Dump data
+        for (uint8_t offset = 0; offset < 4; offset++) {
+            i = page + offset;
+            printf(" %2d  ", i); // Pad with spaces
+            for (uint8_t index = 0; index < 4; index++) {
+                i = 4 * offset + index;
+                printf(" %02X ", buffer[i]);
+            }
 
-      printf("\n\r");
+            printf("\n\r");
+        }
     }
-  }
 } // End PICC_DumpMifareUltralightToSerial()
 
 int main()
 {
-  /* Set debug UART speed */
-  DebugUART.baud(115200);
-  printf("< mbed RFID demo >\n\r");
-  printf("\n\r");
+    /* Set debug UART speed */
+    printf("\n\rUART 115200 baud\n\r");
+    DebugUART.baud(115200);
+    printf("\n\r%s %s\n\r",VERSION,CIBLE);
 
-  /* Init. RC522 Chip */
-  RfChip.PCD_Init();
+    /* Init. RC522 Chip */
+    RfChip.PCD_Init();
 
-  /* Read RC522 version */
-  uint8_t temp = RfChip.PCD_ReadRegister(MFRC522::VersionReg);
-  printf("MFRC522 version: %d\n\r", temp & 0x07);
-  printf("\n\r");
+    /* Read RC522 version */
+    uint8_t temp = RfChip.PCD_ReadRegister(MFRC522::VersionReg);
+    printf("MFRC522 version: %d\n\r", temp & 0x07);
+    printf("\n\r");
 
-  while(1)
-  {
-    LedRed   = 1;
-    LedGreen = 1;
+    while(1) {
+        LedRed   = 1;
+        LedGreen = 1;
 
-    // Look for new cards
-    if ( ! RfChip.PICC_IsNewCardPresent())
-    {
-      wait_ms(500);
-      continue;
-    }
+        // Look for new cards
+        if ( ! RfChip.PICC_IsNewCardPresent()) {
+            wait_ms(500);
+            continue;
+        }
 
-    LedRed   = 0;
+        LedRed   = 0;
 
-    // Select one of the cards
-    if ( ! RfChip.PICC_ReadCardSerial())
-    {
-      wait_ms(500);
-      continue;
-    }
+        // Select one of the cards
+        if ( ! RfChip.PICC_ReadCardSerial()) {
+            wait_ms(500);
+            continue;
+        }
 
-    LedRed   = 1;
-    LedGreen = 0;
+        LedRed   = 1;
+        LedGreen = 0;
 
-    // Dump debug info about the card. PICC_HaltA() is automatically called.
-    DumpToSerial(&(RfChip.uid));
-    wait_ms(200);
-  }
+        // Dump debug info about the card. PICC_HaltA() is automatically called.
+        DumpToSerial(&(RfChip.uid));
+        wait_ms(200);
+    }
 }

--- a/mbed.bld	Wed Dec 18 00:46:40 2013 +0000
+++ b/mbed.bld	Thu Feb 12 13:00:53 2015 +0000
@@ -1,1 +1,1 @@
-http://mbed.org/users/mbed_official/code/mbed/builds/a842253909c9
\ No newline at end of file
+http://mbed.org/users/mbed_official/code/mbed/builds/4fc01daae5a5
\ No newline at end of file