https://github.com/WebBluetoothCG/demos/pull/42
Dependencies: BLE_API mbed-dev-bin nRF51822
Fork of microbit-dal by
source/drivers/DynamicPwm.cpp
- Committer:
- LancasterUniversity
- Date:
- 2016-04-07
- Revision:
- 3:d86a4ddc1867
- Parent:
- 1:8aa5cdb4ab67
File content as of revision 3:d86a4ddc1867:
/* The MIT License (MIT) Copyright (c) 2016 British Broadcasting Corporation. This software is provided by Lancaster University by arrangement with the BBC. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. */ /** * Class definition for DynamicPwm. * * This class addresses a few issues found in the underlying libraries. * This provides the ability for a neat, clean swap between PWM channels. */ #include "MicroBitConfig.h" #include "DynamicPwm.h" #include "MicroBitPin.h" #include "ErrorNo.h" DynamicPwm* DynamicPwm::pwms[NO_PWMS] = { NULL, NULL, NULL }; uint8_t DynamicPwm::lastUsed = NO_PWMS+1; //set it to out of range i.e. 4 so we know it hasn't been used yet. uint16_t DynamicPwm::sharedPeriod = 0; //set the shared period to an unknown state /** * Reassigns an already operational PWM channel to the given pin. * * @param pin The desired pin to begin a PWM wave. * * @param oldPin The pin to stop running a PWM wave. * * @param channel_number The GPIOTE channel being used to drive this PWM channel * * TODO: Merge into mbed, at a later date. */ void gpiote_reinit(PinName pin, PinName oldPin, uint8_t channel_number) { // Connect GPIO input buffers and configure PWM_OUTPUT_PIN_NUMBER as an output. NRF_GPIO->PIN_CNF[pin] = (GPIO_PIN_CNF_SENSE_Disabled << GPIO_PIN_CNF_SENSE_Pos) | (GPIO_PIN_CNF_DRIVE_S0S1 << GPIO_PIN_CNF_DRIVE_Pos) | (GPIO_PIN_CNF_PULL_Disabled << GPIO_PIN_CNF_PULL_Pos) | (GPIO_PIN_CNF_INPUT_Connect << GPIO_PIN_CNF_INPUT_Pos) | (GPIO_PIN_CNF_DIR_Output << GPIO_PIN_CNF_DIR_Pos); NRF_GPIO->OUTCLR = (1 << oldPin); NRF_GPIO->OUTCLR = (1 << pin); /* Finally configure the channel as the caller expects. If OUTINIT works, the channel is configured properly. If it does not, the channel output inheritance sets the proper level. */ NRF_GPIOTE->CONFIG[channel_number] = (GPIOTE_CONFIG_MODE_Task << GPIOTE_CONFIG_MODE_Pos) | ((uint32_t)pin << GPIOTE_CONFIG_PSEL_Pos) | ((uint32_t)GPIOTE_CONFIG_POLARITY_Toggle << GPIOTE_CONFIG_POLARITY_Pos) | ((uint32_t)GPIOTE_CONFIG_OUTINIT_Low << GPIOTE_CONFIG_OUTINIT_Pos); // ((uint32_t)GPIOTE_CONFIG_OUTINIT_High << // GPIOTE_CONFIG_OUTINIT_Pos);// /* Three NOPs are required to make sure configuration is written before setting tasks or getting events */ __NOP(); __NOP(); __NOP(); NRF_TIMER2->CC[channel_number] = 0; } /** * An internal constructor used when allocating a new DynamicPwm instance. * * @param pin the name of the pin for the pwm to target * * @param persistance the level of persistence for this pin PWM_PERSISTENCE_PERSISTENT (can not be replaced until freed, should only be used for system services really.) * or PWM_PERSISTENCE_TRANSIENT (can be replaced at any point if a channel is required.) */ DynamicPwm::DynamicPwm(PinName pin, PwmPersistence persistence) : PwmOut(pin) { this->flags = persistence; } /** * Redirects the pwm channel to point at a different pin. * * @param pin the desired pin to output a PWM wave. * * @code * DynamicPwm* pwm = DynamicPwm::allocate(PinName n); * pwm->redirect(p0); // pwm is now produced on p0 * @endcode */ void DynamicPwm::redirect(PinName pin) { gpiote_reinit(pin, _pwm.pin, (uint8_t)_pwm.pwm); this->_pwm.pin = pin; } /** * Creates a new DynamicPwm instance, or reuses an existing instance that * has a persistence level of PWM_PERSISTENCE_TRANSIENT. * * @param pin the name of the pin for the pwm to target * * @param persistance the level of persistence for this pin PWM_PERSISTENCE_PERSISTENT (can not be replaced until freed, should only be used for system services really.) * or PWM_PERSISTENCE_TRANSIENT (can be replaced at any point if a channel is required.) * * @return a pointer to the first available free pwm channel - or the first one that can be reallocated. If * no channels are available, NULL is returned. * * @code * DynamicPwm* pwm = DynamicPwm::allocate(PinName n); * @endcode */ DynamicPwm* DynamicPwm::allocate(PinName pin, PwmPersistence persistence) { //try to find a blank spot first for(int i = 0; i < NO_PWMS; i++) { if(pwms[i] == NULL) { lastUsed = i; pwms[i] = new DynamicPwm(pin, persistence); return pwms[i]; } } //no blank spot.. try to find a transient PWM int channelIterator = (lastUsed + 1 > NO_PWMS - 1) ? 0 : lastUsed + 1; while(channelIterator != lastUsed) { if(pwms[channelIterator]->flags & PWM_PERSISTENCE_TRANSIENT) { lastUsed = channelIterator; pwms[channelIterator]->flags = persistence; pwms[channelIterator]->redirect(pin); return pwms[channelIterator]; } channelIterator = (channelIterator + 1 > NO_PWMS - 1) ? 0 : channelIterator + 1; } //if we haven't found a free one, we must try to allocate the last used... if(pwms[lastUsed]->flags & PWM_PERSISTENCE_TRANSIENT) { pwms[lastUsed]->flags = persistence; pwms[lastUsed]->redirect(pin); return pwms[lastUsed]; } //well if we have no transient channels - we can't give any away! :( return null return (DynamicPwm*)NULL; } /** * Frees this DynamicPwm instance for reuse. * * @code * DynamicPwm* pwm = DynamicPwm::allocate(); * pwm->release(); * @endcode */ void DynamicPwm::release() { //free the pwm instance. NRF_GPIOTE->CONFIG[(uint8_t) _pwm.pwm] = 0; pwmout_free(&_pwm); this->flags = PWM_PERSISTENCE_TRANSIENT; //set the pointer to this object to null... for(int i =0; i < NO_PWMS; i++) if(pwms[i] == this) { delete pwms[i]; pwms[i] = NULL; } } /** * A lightweight wrapper around the super class' write in order to capture the value * * @param value the duty cycle percentage in floating point format. * * @return MICROBIT_OK on success, MICROBIT_INVALID_PARAMETER if value is out of range * * @code * DynamicPwm* pwm = DynamicPwm::allocate(); * pwm->write(0.5); * @endcode */ int DynamicPwm::write(float value){ if(value < 0) return MICROBIT_INVALID_PARAMETER; PwmOut::write(value); lastValue = value; return MICROBIT_OK; } /** * Retreives the PinName associated with this DynamicPwm instance. * * @code * DynamicPwm* pwm = DynamicPwm::allocate(PinName n); * * // returns the PinName n. * pwm->getPinName(); * @endcode * * @note This should be used to check that the DynamicPwm instance has not * been reallocated for use in another part of a program. */ PinName DynamicPwm::getPinName() { return _pwm.pin; } /** * Retreives the last value that has been written to this DynamicPwm instance. * in the range 0 - 1023 inclusive. * * @code * DynamicPwm* pwm = DynamicPwm::allocate(PinName n); * pwm->write(0.5); * * // will return 512. * pwm->getValue(); * @endcode */ int DynamicPwm::getValue() { return (float)lastValue * float(MICROBIT_PIN_MAX_OUTPUT); } /** * Retreives the current period in use by the entire PWM module in microseconds. * * Example: * @code * DynamicPwm* pwm = DynamicPwm::allocate(PinName n); * pwm->getPeriod(); * @endcode */ int DynamicPwm::getPeriodUs() { return sharedPeriod; } /** * Retreives the current period in use by the entire PWM module in milliseconds. * * Example: * @code * DynamicPwm* pwm = DynamicPwm::allocate(PinName n); * pwm->setPeriodUs(20000); * * // will return 20000 * pwm->getPeriod(); * @endcode */ int DynamicPwm::getPeriod() { return getPeriodUs() / 1000; } /** * Sets the period used by the WHOLE PWM module. * * @param period the desired period in microseconds. * * @return MICROBIT_OK on success, MICROBIT_INVALID_PARAMETER if period is out of range * * Example: * @code * DynamicPwm* pwm = DynamicPwm::allocate(PinName n); * * // period now is 20ms * pwm->setPeriodUs(20000); * @endcode * * @note Any changes to the period will AFFECT ALL CHANNELS. */ int DynamicPwm::setPeriodUs(int period) { if(period < 0) return MICROBIT_INVALID_PARAMETER; //#HACK this forces mbed to update the pulse width calculation. period_us(period); write(lastValue); sharedPeriod = period; return MICROBIT_OK; } /** * Sets the period used by the WHOLE PWM module. Any changes to the period will AFFECT ALL CHANNELS. * * @param period the desired period in milliseconds. * * @return MICROBIT_OK on success, MICROBIT_INVALID_PARAMETER if period is out of range * * Example: * @code * DynamicPwm* pwm = DynamicPwm::allocate(PinName n); * * // period now is 20ms * pwm->setPeriod(20); * @endcode */ int DynamicPwm::setPeriod(int period) { return setPeriodUs(period * 1000); }