Diff: main.cpp

Revision:

16:3dd14aac7233

Parent:

15:4131b64ca8f9

Child:

17:cbd4487522da

diff -r 4131b64ca8f9 -r 3dd14aac7233 main.cpp
--- a/main.cpp	Tue Jan 29 05:34:58 2019 +0000
+++ b/main.cpp	Fri Feb 08 01:37:06 2019 +0000
@@ -8,20 +8,23 @@
 const char TURNON[] = "turnon";
 const char TURNOFF[] = "turnoff";
 
-const char TURN_ON_LIGHT[] = "TurnOnLight";
-const char TURN_OFF_LIGHT[] = "TurnOffLight";
+const char TURN_ON_LIGHT[] = "1";
+const char TURN_OFF_LIGHT[] = "0";
 
 const char _header[] = "PH Alarm";
-//DigitalOut led1(LED1);
-//DigitalOut pin(D7);
-PwmOut pwm( PA_8 );
- 
-//PwmOut pwmLED(GPIO4); 
+
+
+
+DigitalOut led( PA_8 );
+
+Serial pc(USBTX,USBRX);
+//PwmOut pwm( PA_8  );
+
 
 // these options must match the settings on your Conduit
 // uncomment the following lines and edit their values to match your configuration
 static std::string config_network_name = "iotlab01";
-static std::string config_network_pass = "1145141919810";
+static std::string config_network_pass = "11223344";
 static uint8_t config_frequency_sub_band = 7; 
 
 bool strCmp(char* str1, const char* str2, int len)
@@ -36,6 +39,7 @@
 
 
 int main() {
+    pc.baud(9600);
     int32_t ret; 
     mDot* dot;
     std::vector<uint8_t> sendData, recvData;
@@ -43,18 +47,19 @@
     char sendBuf[11],recvBuf[30];
     int  i;
     //pwm.period(0.001f);
-    pwm.period_ms(1);
-    pwm = 0.5f;
+//    led.period_ms(1);
+//    led = 0.5f;
     for (int val = 0; val < 10; val +=1){
-        pwm = !pwm;
-        wait(1);
+        led = !led;
+        wait(0.5);
         } 
     //pwm.period_us(1000); 
     // get a mDot handle
+   
     dot = mDot::getInstance();
 
     // print library version information
-    logInfo("version: %s", dot->getId().c_str());
+    pc.printf("version: %s", dot->getId().c_str());
 
     //*******************************************
     // configuration
@@ -62,7 +67,7 @@
     // reset to default config so we know what state we're in
     dot->resetConfig();
 
-    dot->setLogLevel(mts::MTSLog::INFO_LEVEL);
+    dot->setLogLevel(mts::MTSLog::TRACE_LEVEL);
 
     // set up the mDot with our network information: frequency sub band, network name, and network password
     // these can all be saved in NVM so they don't need to be set every time - see mDot::saveConfig()
@@ -70,48 +75,48 @@
     // frequency sub band is only applicable in the 915 (US) frequency band
     // if using a MultiTech Conduit gateway, use the same sub band as your Conduit (1-8) - the mDot will use the 8 channels in that sub band
     // if using a gateway that supports all 64 channels, use sub band 0 - the mDot will use all 64 channels
-    logInfo("setting frequency sub band");
+    pc.printf("setting frequency sub band");
     if ((ret = dot->setFrequencySubBand(config_frequency_sub_band)) != mDot::MDOT_OK) {
-        logError("failed to set frequency sub band %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+        pc.printf("failed to set frequency sub band %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
     }
 
-    logInfo("setting network name");
+    pc.printf("setting network name");
     if ((ret = dot->setNetworkName(config_network_name)) != mDot::MDOT_OK) {
-        logError("failed to set network name %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+        pc.printf("failed to set network name %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
     }
 
-    logInfo("setting network password");
+    pc.printf("setting network password");
     if ((ret = dot->setNetworkPassphrase(config_network_pass)) != mDot::MDOT_OK) {
-        logError("failed to set network password %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+        pc.printf("failed to set network password %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
     }
 
     // a higher spreading factor allows for longer range but lower throughput
     // in the 915 (US) frequency band, spreading factors 7 - 10 are available
     // in the 868 (EU) frequency band, spreading factors 7 - 12 are available
-    logInfo("setting TX spreading factor");
+    pc.printf("setting TX spreading factor");
     if ((ret = dot->setTxDataRate(mDot::SF_10)) != mDot::MDOT_OK) {
-        logError("failed to set TX datarate %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+        pc.printf("failed to set TX datarate %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
     }
 
     // request receive confirmation of packets from the gateway
-    logInfo("enabling ACKs");
-    if ((ret = dot->setAck(1)) != mDot::MDOT_OK) {
-        logError("failed to enable ACKs %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+    pc.printf("enabling ACKs");
+    if ((ret = dot->setAck(0)) != mDot::MDOT_OK) {
+        pc.printf("failed to enable ACKs %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
     }
 
     // save this configuration to the mDot's NVM
-    logInfo("saving config");
+    pc.printf("saving config");
     if (! dot->saveConfig()) {
-        logError("failed to save configuration");
+        pc.printf("failed to save configuration");
     }
     //*******************************************
     // end of configuration
     //*******************************************
 
     // attempt to join the network
-    logInfo("joining network");
+    pc.printf("joining network");
     while ((ret = dot->joinNetwork()) != mDot::MDOT_OK) {
-        logError("failed to join network %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
+        pc.printf("failed to join network %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
         // in the 868 (EU) frequency band, we need to wait until another channel is available before transmitting again
         osDelay(std::max((uint32_t)1000, (uint32_t)dot->getNextTxMs()));
     }
@@ -127,42 +132,43 @@
                
     // send the data to the gateway
     if ((ret = dot->send(sendData)) != mDot::MDOT_OK) {
-        logError("failed to send", ret, mDot::getReturnCodeString(ret).c_str());
+        pc.printf("failed to send", ret, mDot::getReturnCodeString(ret).c_str());
     } else {
-            logInfo("successfully sent data to gateway");
+            pc.printf("successfully sent data to gateway");
     } 
     while (true) {
        for(i=0;i<30;i++)recvBuf[i]=0;
        if ((ret = dot->send(turnonData)) != mDot::MDOT_OK) {
-          logError("failed to send", ret, mDot::getReturnCodeString(ret).c_str());
+          pc.printf("failed to send", ret, mDot::getReturnCodeString(ret).c_str());
        } else {
-          logInfo("successfully sent data to gateway");
-          recvData.clear();
+          pc.printf("successfully sent data to gateway");
+          
           if ((ret = dot->recv(recvData)) != mDot::MDOT_OK) {
-             logError("failed to recv: [%d][%s]", ret, mDot::getReturnCodeString(ret).c_str());
+             pc.printf("failed to recv: [%d][%s]", ret, mDot::getReturnCodeString(ret).c_str());
           } else {
-             logInfo("datasize = %d", recvData.size());
+             pc.printf("datasize = %d", recvData.size());
              for( int i=0; i< recvData.size(); i++ )
                 recvBuf[i] = recvData[i];
-             logInfo("%s", recvBuf);
+             pc.printf("%s", recvBuf);
              if(strCmp(recvBuf, TURN_ON_LIGHT, recvData.size())){
-                 logInfo("Turn on the alarm");
+                 pc.printf("Turn on the alarm");
                  std::vector<uint8_t> data;
                  data.push_back('1');
-                 pwm = 0.0f;
-                 //led1 = 1;
+                 led = 0;
+            
                  wait(0.10f);
                  dot->send(data);
              }
              if(strCmp(recvBuf, TURN_OFF_LIGHT, recvData.size())){
-                 logInfo("Turn off the alarm");
+                 pc.printf("Turn off the alarm");
                 std::vector<uint8_t> data;
                  data.push_back('0');
-                 pwm = 1.0f;
-                 //led1 = 0;
+                 led = 1;
+             
                  wait(0.10f);
                  dot->send(data);
              }
+             recvData.clear();
           } 
        }