edrx change set

Committer:
RobMeades
Date:
Fri Mar 02 13:28:32 2018 +0000
Revision:
14:e7dcf3388403
Parent:
7:3b2ca10cc23a
Child:
16:2b30a056ae54
Make sure that the event handler thread is closed cleanly in all cases and add tests that this is the case, both for sleep and for memory.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
RobMeades 0:7ccf0e7e8a83 1 /* Copyright (c) 2017 ARM Limited
RobMeades 0:7ccf0e7e8a83 2 *
RobMeades 0:7ccf0e7e8a83 3 * Licensed under the Apache License, Version 2.0 (the "License");
RobMeades 0:7ccf0e7e8a83 4 * you may not use this file except in compliance with the License.
RobMeades 0:7ccf0e7e8a83 5 * You may obtain a copy of the License at
RobMeades 0:7ccf0e7e8a83 6 *
RobMeades 0:7ccf0e7e8a83 7 * http://www.apache.org/licenses/LICENSE-2.0
RobMeades 0:7ccf0e7e8a83 8 *
RobMeades 0:7ccf0e7e8a83 9 * Unless required by applicable law or agreed to in writing, software
RobMeades 0:7ccf0e7e8a83 10 * distributed under the License is distributed on an "AS IS" BASIS,
RobMeades 0:7ccf0e7e8a83 11 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
RobMeades 0:7ccf0e7e8a83 12 * See the License for the specific language governing permissions and
RobMeades 0:7ccf0e7e8a83 13 * limitations under the License.
RobMeades 0:7ccf0e7e8a83 14 */
RobMeades 0:7ccf0e7e8a83 15
rob.meades@u-blox.com 1:bc228becc45d 16 #ifndef _UBLOX_AT_CELLULAR_INTERFACE_
rob.meades@u-blox.com 1:bc228becc45d 17 #define _UBLOX_AT_CELLULAR_INTERFACE_
RobMeades 0:7ccf0e7e8a83 18
rob.meades@u-blox.com 1:bc228becc45d 19 #include "UbloxCellularBase.h"
rob.meades@u-blox.com 1:bc228becc45d 20 #include "CellularBase.h"
RobMeades 0:7ccf0e7e8a83 21 #include "NetworkStack.h"
RobMeades 0:7ccf0e7e8a83 22
RobMeades 0:7ccf0e7e8a83 23 /** UbloxATCellularInterface class.
RobMeades 0:7ccf0e7e8a83 24 *
RobMeades 0:7ccf0e7e8a83 25 * This uses the cellular-tuned IP stack that
RobMeades 0:7ccf0e7e8a83 26 * is on-board the cellular modem instead of the
RobMeades 0:7ccf0e7e8a83 27 * LWIP stack on the mbed MCU.
RobMeades 0:7ccf0e7e8a83 28 *
RobMeades 0:7ccf0e7e8a83 29 * There are three advantages to using this mechanism:
RobMeades 0:7ccf0e7e8a83 30 *
RobMeades 0:7ccf0e7e8a83 31 * 1. Since the modem interface remains in AT mode
RobMeades 0:7ccf0e7e8a83 32 * throughout, it is possible to continue using
RobMeades 0:7ccf0e7e8a83 33 * any AT commands (e.g. send SMS, use the module's
RobMeades 0:7ccf0e7e8a83 34 * file system, etc.) while the connection is up.
RobMeades 0:7ccf0e7e8a83 35 *
RobMeades 0:7ccf0e7e8a83 36 * 2. The UbloxATCellularInterfaceExt class can
RobMeades 0:7ccf0e7e8a83 37 * be used to perform very simple HTTP and FTP
RobMeades 0:7ccf0e7e8a83 38 * operations using the modem's on-board clients.
RobMeades 0:7ccf0e7e8a83 39 *
RobMeades 0:7ccf0e7e8a83 40 * 3. LWIP is not required (and hence RAM is saved).
RobMeades 0:7ccf0e7e8a83 41 *
RobMeades 0:7ccf0e7e8a83 42 * The disadvantage is that some additional parsing
RobMeades 0:7ccf0e7e8a83 43 * (at the AT interface) has to go on in order to exchange
RobMeades 0:7ccf0e7e8a83 44 * IP packets, so this is less efficient under heavy loads.
RobMeades 0:7ccf0e7e8a83 45 * Also TCP Server and getting/setting of socket options is
RobMeades 0:7ccf0e7e8a83 46 * currently not supported.
RobMeades 0:7ccf0e7e8a83 47 */
RobMeades 0:7ccf0e7e8a83 48
RobMeades 0:7ccf0e7e8a83 49 // Forward declaration
RobMeades 0:7ccf0e7e8a83 50 class NetworkStack;
RobMeades 0:7ccf0e7e8a83 51
RobMeades 0:7ccf0e7e8a83 52 /*
RobMeades 0:7ccf0e7e8a83 53 * NOTE: order is important in the inheritance below! PAL takes this class
RobMeades 0:7ccf0e7e8a83 54 * and casts it to CellularInterface and so CellularInterface has to be first
RobMeades 0:7ccf0e7e8a83 55 * in the last for that to work.
RobMeades 0:7ccf0e7e8a83 56 */
RobMeades 0:7ccf0e7e8a83 57
RobMeades 0:7ccf0e7e8a83 58 /** UbloxATCellularInterface class.
RobMeades 0:7ccf0e7e8a83 59 *
RobMeades 0:7ccf0e7e8a83 60 * This class implements the network stack interface into the cellular
RobMeades 0:7ccf0e7e8a83 61 * modems on the C030 and C027 boards for 2G/3G/4G modules using
RobMeades 0:7ccf0e7e8a83 62 * the IP stack running on the cellular module.
RobMeades 0:7ccf0e7e8a83 63 */
RobMeades 0:7ccf0e7e8a83 64 class UbloxATCellularInterface : public CellularBase, public NetworkStack, virtual public UbloxCellularBase {
RobMeades 0:7ccf0e7e8a83 65
RobMeades 0:7ccf0e7e8a83 66 public:
RobMeades 0:7ccf0e7e8a83 67 /** Constructor.
RobMeades 0:7ccf0e7e8a83 68 *
RobMeades 0:7ccf0e7e8a83 69 * @param tx the UART TX data pin to which the modem is attached.
RobMeades 0:7ccf0e7e8a83 70 * @param rx the UART RX data pin to which the modem is attached.
RobMeades 0:7ccf0e7e8a83 71 * @param baud the UART baud rate.
RobMeades 0:7ccf0e7e8a83 72 * @param debug_on true to switch AT interface debug on, otherwise false.
RobMeades 0:7ccf0e7e8a83 73 */
RobMeades 0:7ccf0e7e8a83 74 UbloxATCellularInterface(PinName tx = MDMTXD,
RobMeades 0:7ccf0e7e8a83 75 PinName rx = MDMRXD,
RobMeades 0:7ccf0e7e8a83 76 int baud = MBED_CONF_UBLOX_CELL_BAUD_RATE,
RobMeades 0:7ccf0e7e8a83 77 bool debug_on = false);
RobMeades 0:7ccf0e7e8a83 78
RobMeades 0:7ccf0e7e8a83 79 /* Destructor.
RobMeades 0:7ccf0e7e8a83 80 */
RobMeades 0:7ccf0e7e8a83 81 virtual ~UbloxATCellularInterface();
RobMeades 0:7ccf0e7e8a83 82
RobMeades 0:7ccf0e7e8a83 83 /** The amount of extra space needed in terms of AT interface
RobMeades 0:7ccf0e7e8a83 84 * characters to get a chunk of user data (i.e. one UDP packet
RobMeades 0:7ccf0e7e8a83 85 * or a portion of a TCP packet) across the AT interface.
RobMeades 0:7ccf0e7e8a83 86 */
RobMeades 0:7ccf0e7e8a83 87 #define AT_PACKET_OVERHEAD 77
RobMeades 0:7ccf0e7e8a83 88
RobMeades 0:7ccf0e7e8a83 89 /** The profile to use (on board the modem).
RobMeades 0:7ccf0e7e8a83 90 */
RobMeades 0:7ccf0e7e8a83 91 #define PROFILE "0"
RobMeades 0:7ccf0e7e8a83 92
RobMeades 0:7ccf0e7e8a83 93 /** Translates a host name to an IP address with specific IP version.
RobMeades 0:7ccf0e7e8a83 94 *
RobMeades 0:7ccf0e7e8a83 95 * The host name may be either a domain name or an IP address. If the
RobMeades 0:7ccf0e7e8a83 96 * host name is an IP address, no network transactions will be performed.
RobMeades 0:7ccf0e7e8a83 97 *
RobMeades 0:7ccf0e7e8a83 98 * If no stack-specific DNS resolution is provided, the host name
RobMeades 0:7ccf0e7e8a83 99 * will be resolved using a UDP socket on the stack.
RobMeades 0:7ccf0e7e8a83 100 *
RobMeades 0:7ccf0e7e8a83 101 * @param host Host name to resolve.
RobMeades 0:7ccf0e7e8a83 102 * @param address Destination for the host SocketAddress.
RobMeades 0:7ccf0e7e8a83 103 * @param version IP version of address to resolve, NSAPI_UNSPEC indicates
RobMeades 0:7ccf0e7e8a83 104 * version is chosen by the stack (defaults to NSAPI_UNSPEC).
RobMeades 0:7ccf0e7e8a83 105 * @return 0 on success, negative error code on failure.
RobMeades 0:7ccf0e7e8a83 106 */
RobMeades 0:7ccf0e7e8a83 107 virtual nsapi_error_t gethostbyname(const char *host,
RobMeades 0:7ccf0e7e8a83 108 SocketAddress *address,
RobMeades 0:7ccf0e7e8a83 109 nsapi_version_t version = NSAPI_UNSPEC);
RobMeades 0:7ccf0e7e8a83 110
RobMeades 0:7ccf0e7e8a83 111 /** Set the authentication scheme.
RobMeades 0:7ccf0e7e8a83 112 *
RobMeades 0:7ccf0e7e8a83 113 * @param auth The authentication scheme, chose from
RobMeades 0:7ccf0e7e8a83 114 * NSAPI_SECURITY_NONE, NSAPI_SECURITY_PAP,
RobMeades 0:7ccf0e7e8a83 115 * NSAPI_SECURITY_CHAP or NSAPI_SECURITY_UNKNOWN;
RobMeades 0:7ccf0e7e8a83 116 * use NSAPI_SECURITY_UNKNOWN to try all of none,
RobMeades 0:7ccf0e7e8a83 117 * PAP and CHAP.
RobMeades 0:7ccf0e7e8a83 118 */
RobMeades 0:7ccf0e7e8a83 119 virtual void set_authentication(nsapi_security_t auth);
RobMeades 0:7ccf0e7e8a83 120
RobMeades 0:7ccf0e7e8a83 121 /** Set the cellular network credentials.
RobMeades 0:7ccf0e7e8a83 122 *
RobMeades 0:7ccf0e7e8a83 123 * Please check documentation of connect() for default behaviour of APN settings.
RobMeades 0:7ccf0e7e8a83 124 *
RobMeades 0:7ccf0e7e8a83 125 * @param apn Access point name.
RobMeades 0:7ccf0e7e8a83 126 * @param uname Optionally, user name.
RobMeades 0:7ccf0e7e8a83 127 * @param pwd Optionally, password.
RobMeades 0:7ccf0e7e8a83 128 */
RobMeades 0:7ccf0e7e8a83 129 virtual void set_credentials(const char *apn, const char *uname = 0,
RobMeades 0:7ccf0e7e8a83 130 const char *pwd = 0);
RobMeades 0:7ccf0e7e8a83 131
RobMeades 0:7ccf0e7e8a83 132 /** Set the PIN code for the SIM card.
RobMeades 0:7ccf0e7e8a83 133 *
RobMeades 0:7ccf0e7e8a83 134 * @param sim_pin PIN for the SIM card.
RobMeades 0:7ccf0e7e8a83 135 */
RobMeades 0:7ccf0e7e8a83 136 virtual void set_sim_pin(const char *sim_pin);
RobMeades 0:7ccf0e7e8a83 137
RobMeades 0:7ccf0e7e8a83 138 /** Connect to the cellular network and start the interface.
RobMeades 0:7ccf0e7e8a83 139 *
RobMeades 0:7ccf0e7e8a83 140 * Attempts to connect to a cellular network. Note: if init() has
RobMeades 0:7ccf0e7e8a83 141 * not been called beforehand, connect() will call it first.
RobMeades 0:7ccf0e7e8a83 142 *
RobMeades 0:7ccf0e7e8a83 143 * @param sim_pin PIN for the SIM card.
RobMeades 0:7ccf0e7e8a83 144 * @param apn Optionally, access point name.
RobMeades 0:7ccf0e7e8a83 145 * @param uname Optionally, user name.
RobMeades 0:7ccf0e7e8a83 146 * @param pwd Optionally, password.
RobMeades 0:7ccf0e7e8a83 147 * @return NSAPI_ERROR_OK on success, or negative error code on failure.
RobMeades 0:7ccf0e7e8a83 148 */
RobMeades 0:7ccf0e7e8a83 149 virtual nsapi_error_t connect(const char *sim_pin, const char *apn = 0,
RobMeades 0:7ccf0e7e8a83 150 const char *uname = 0, const char *pwd = 0);
RobMeades 0:7ccf0e7e8a83 151
RobMeades 0:7ccf0e7e8a83 152 /** Attempt to connect to the cellular network.
RobMeades 0:7ccf0e7e8a83 153 *
RobMeades 0:7ccf0e7e8a83 154 * Brings up the network interface. Connects to the cellular radio
RobMeades 0:7ccf0e7e8a83 155 * network and then brings up IP stack on the cellular modem to be used
RobMeades 0:7ccf0e7e8a83 156 * indirectly via AT commands, rather than LWIP. Note: if init() has
RobMeades 0:7ccf0e7e8a83 157 * not been called beforehand, connect() will call it first.
RobMeades 0:7ccf0e7e8a83 158 * NOTE: even a failed attempt to connect will cause the modem to remain
RobMeades 0:7ccf0e7e8a83 159 * powered up. To power it down, call deinit().
RobMeades 0:7ccf0e7e8a83 160 *
RobMeades 0:7ccf0e7e8a83 161 * For APN setup, default behaviour is to use 'internet' as APN string
RobMeades 0:7ccf0e7e8a83 162 * and assuming no authentication is required, i.e., user name and password
RobMeades 0:7ccf0e7e8a83 163 * are not set. Optionally, a database lookup can be requested by turning
RobMeades 0:7ccf0e7e8a83 164 * on the APN database lookup feature. The APN database is by no means
RobMeades 0:7ccf0e7e8a83 165 * exhaustive (feel free to submit a pull request with additional values).
RobMeades 0:7ccf0e7e8a83 166 * It contains a short list of some public APNs with publicly available
RobMeades 0:7ccf0e7e8a83 167 * user names and passwords (if required) in some particular countries only.
RobMeades 0:7ccf0e7e8a83 168 * Lookup is done using IMSI (International mobile subscriber identifier).
RobMeades 0:7ccf0e7e8a83 169 *
RobMeades 0:7ccf0e7e8a83 170 * The preferred method is to setup APN using 'set_credentials()' API.
RobMeades 0:7ccf0e7e8a83 171 *
RobMeades 0:7ccf0e7e8a83 172 * If you find that the AT interface returns "CONNECT" but shortly afterwards
RobMeades 0:7ccf0e7e8a83 173 * drops the connection then 99% of the time this will be because the APN
RobMeades 0:7ccf0e7e8a83 174 * is incorrect.
RobMeades 0:7ccf0e7e8a83 175 *
RobMeades 0:7ccf0e7e8a83 176 * @return 0 on success, negative error code on failure.
RobMeades 0:7ccf0e7e8a83 177 */
RobMeades 0:7ccf0e7e8a83 178 virtual nsapi_error_t connect();
RobMeades 0:7ccf0e7e8a83 179
RobMeades 0:7ccf0e7e8a83 180 /** Attempt to disconnect from the network.
RobMeades 0:7ccf0e7e8a83 181 *
RobMeades 0:7ccf0e7e8a83 182 * Brings down the network interface.
RobMeades 0:7ccf0e7e8a83 183 * Does not bring down the Radio network.
RobMeades 0:7ccf0e7e8a83 184 *
RobMeades 0:7ccf0e7e8a83 185 * @return 0 on success, negative error code on failure.
RobMeades 0:7ccf0e7e8a83 186 */
RobMeades 0:7ccf0e7e8a83 187 virtual nsapi_error_t disconnect();
RobMeades 0:7ccf0e7e8a83 188
RobMeades 0:7ccf0e7e8a83 189 /** Adds or removes a SIM facility lock.
RobMeades 0:7ccf0e7e8a83 190 *
RobMeades 0:7ccf0e7e8a83 191 * Can be used to enable or disable SIM PIN check at device startup.
RobMeades 0:7ccf0e7e8a83 192 *
RobMeades 0:7ccf0e7e8a83 193 * @param set Can be set to true if the SIM PIN check is supposed
RobMeades 0:7ccf0e7e8a83 194 * to be enabled and vice versa.
RobMeades 0:7ccf0e7e8a83 195 * @param immediate If true, change the SIM PIN now, else set a flag
RobMeades 0:7ccf0e7e8a83 196 * and make the change only when connect() is called.
RobMeades 0:7ccf0e7e8a83 197 * If this is true and init() has not been called previously,
RobMeades 0:7ccf0e7e8a83 198 * it will be called first.
RobMeades 0:7ccf0e7e8a83 199 * @param sim_pin The current SIM PIN, must be a const. If this is not
RobMeades 0:7ccf0e7e8a83 200 * provided, the SIM PIN must have previously been set by a
RobMeades 0:7ccf0e7e8a83 201 * call to set_sim_pin().
RobMeades 0:7ccf0e7e8a83 202 * @return 0 on success, negative error code on failure.
RobMeades 0:7ccf0e7e8a83 203 */
RobMeades 0:7ccf0e7e8a83 204 nsapi_error_t set_sim_pin_check(bool set, bool immediate = false,
RobMeades 0:7ccf0e7e8a83 205 const char *sim_pin = NULL);
RobMeades 0:7ccf0e7e8a83 206
RobMeades 0:7ccf0e7e8a83 207 /** Change the PIN for the SIM card.
RobMeades 0:7ccf0e7e8a83 208 *
RobMeades 0:7ccf0e7e8a83 209 * Provide the new PIN for your SIM card with this API. It is ONLY possible to
RobMeades 0:7ccf0e7e8a83 210 * change the SIM PIN when SIM PIN checking is ENABLED.
RobMeades 0:7ccf0e7e8a83 211 *
RobMeades 0:7ccf0e7e8a83 212 * @param new_pin New PIN to be used in string format, must be a const.
RobMeades 0:7ccf0e7e8a83 213 * @param immediate If true, change the SIM PIN now, else set a flag
RobMeades 0:7ccf0e7e8a83 214 * and make the change only when connect() is called.
RobMeades 0:7ccf0e7e8a83 215 * If this is true and init() has not been called previously,
RobMeades 0:7ccf0e7e8a83 216 * it will be called first.
RobMeades 0:7ccf0e7e8a83 217 * @param old_pin Old PIN, must be a const. If this is not provided, the SIM PIN
RobMeades 0:7ccf0e7e8a83 218 * must have previously been set by a call to set_sim_pin().
RobMeades 0:7ccf0e7e8a83 219 * @return 0 on success, negative error code on failure.
RobMeades 0:7ccf0e7e8a83 220 */
RobMeades 0:7ccf0e7e8a83 221 nsapi_error_t set_new_sim_pin(const char *new_pin, bool immediate = false,
RobMeades 0:7ccf0e7e8a83 222 const char *old_pin = NULL);
RobMeades 0:7ccf0e7e8a83 223
RobMeades 0:7ccf0e7e8a83 224 /** Check if the connection is currently established or not.
RobMeades 0:7ccf0e7e8a83 225 *
RobMeades 0:7ccf0e7e8a83 226 * @return True if connected to a data network, otherwise false.
RobMeades 0:7ccf0e7e8a83 227 */
RobMeades 0:7ccf0e7e8a83 228 virtual bool is_connected();
RobMeades 0:7ccf0e7e8a83 229
RobMeades 0:7ccf0e7e8a83 230 /** Get the local IP address
RobMeades 0:7ccf0e7e8a83 231 *
RobMeades 0:7ccf0e7e8a83 232 * @return Null-terminated representation of the local IP address
RobMeades 0:7ccf0e7e8a83 233 * or null if no IP address has been received.
RobMeades 0:7ccf0e7e8a83 234 */
RobMeades 0:7ccf0e7e8a83 235 virtual const char *get_ip_address();
RobMeades 0:7ccf0e7e8a83 236
RobMeades 0:7ccf0e7e8a83 237 /** Get the local network mask.
RobMeades 0:7ccf0e7e8a83 238 *
RobMeades 0:7ccf0e7e8a83 239 * @return Null-terminated representation of the local network mask
RobMeades 0:7ccf0e7e8a83 240 * or null if no network mask has been received.
RobMeades 0:7ccf0e7e8a83 241 */
RobMeades 0:7ccf0e7e8a83 242 virtual const char *get_netmask();
RobMeades 0:7ccf0e7e8a83 243
RobMeades 0:7ccf0e7e8a83 244 /** Get the local gateways.
RobMeades 0:7ccf0e7e8a83 245 *
RobMeades 0:7ccf0e7e8a83 246 * @return Null-terminated representation of the local gateway
RobMeades 0:7ccf0e7e8a83 247 * or null if no network mask has been received.
RobMeades 0:7ccf0e7e8a83 248 */
RobMeades 0:7ccf0e7e8a83 249 virtual const char *get_gateway();
RobMeades 0:7ccf0e7e8a83 250
RobMeades 0:7ccf0e7e8a83 251 /** Call back in case connection is lost.
RobMeades 0:7ccf0e7e8a83 252 *
RobMeades 0:7ccf0e7e8a83 253 * @param cb The function to call.
RobMeades 0:7ccf0e7e8a83 254 */
RobMeades 0:7ccf0e7e8a83 255 void connection_status_cb(Callback<void(nsapi_error_t)> cb);
RobMeades 0:7ccf0e7e8a83 256
RobMeades 0:7ccf0e7e8a83 257 protected:
RobMeades 0:7ccf0e7e8a83 258
RobMeades 0:7ccf0e7e8a83 259 /** Socket "unused" value.
RobMeades 0:7ccf0e7e8a83 260 */
RobMeades 0:7ccf0e7e8a83 261 #define SOCKET_UNUSED -1
RobMeades 0:7ccf0e7e8a83 262
RobMeades 0:7ccf0e7e8a83 263 /** Socket timeout value in milliseconds.
RobMeades 0:7ccf0e7e8a83 264 * Note: the sockets layer above will retry the
RobMeades 0:7ccf0e7e8a83 265 * call to the functions here when they return NSAPI_ERROR_WOULD_BLOCK
RobMeades 0:7ccf0e7e8a83 266 * and the user has set a larger timeout or full blocking.
RobMeades 0:7ccf0e7e8a83 267 */
RobMeades 0:7ccf0e7e8a83 268 #define SOCKET_TIMEOUT 1000
RobMeades 0:7ccf0e7e8a83 269
RobMeades 0:7ccf0e7e8a83 270 /** The maximum number of bytes in a packet that can be written
RobMeades 0:7ccf0e7e8a83 271 * to the AT interface in one go.
RobMeades 0:7ccf0e7e8a83 272 */
RobMeades 0:7ccf0e7e8a83 273 #define MAX_WRITE_SIZE 1024
RobMeades 0:7ccf0e7e8a83 274
RobMeades 0:7ccf0e7e8a83 275 /** The maximum number of bytes in a packet that can be read from
RobMeades 0:7ccf0e7e8a83 276 * from the AT interface in one go.
RobMeades 0:7ccf0e7e8a83 277 */
RobMeades 0:7ccf0e7e8a83 278 #define MAX_READ_SIZE 1024
RobMeades 0:7ccf0e7e8a83 279
RobMeades 0:7ccf0e7e8a83 280 /** Management structure for sockets.
RobMeades 0:7ccf0e7e8a83 281 */
RobMeades 0:7ccf0e7e8a83 282 typedef struct {
RobMeades 0:7ccf0e7e8a83 283 int modem_handle; //!< The modem's handle for the socket.
RobMeades 0:7ccf0e7e8a83 284 volatile nsapi_size_t pending; //!< The number of received bytes pending.
RobMeades 0:7ccf0e7e8a83 285 void (*callback)(void *); //!< A callback for events.
RobMeades 0:7ccf0e7e8a83 286 void *data; //!< A data pointer that must be passed to the callback.
RobMeades 0:7ccf0e7e8a83 287 } SockCtrl;
RobMeades 0:7ccf0e7e8a83 288
RobMeades 0:7ccf0e7e8a83 289 /** Sockets storage.
RobMeades 0:7ccf0e7e8a83 290 */
RobMeades 0:7ccf0e7e8a83 291 SockCtrl _sockets[7];
RobMeades 0:7ccf0e7e8a83 292
RobMeades 0:7ccf0e7e8a83 293 /** Storage for a single IP address.
RobMeades 0:7ccf0e7e8a83 294 */
RobMeades 0:7ccf0e7e8a83 295 char *_ip;
RobMeades 0:7ccf0e7e8a83 296
RobMeades 0:7ccf0e7e8a83 297 /** The APN to use.
RobMeades 0:7ccf0e7e8a83 298 */
RobMeades 0:7ccf0e7e8a83 299 const char *_apn;
RobMeades 0:7ccf0e7e8a83 300
RobMeades 0:7ccf0e7e8a83 301 /** The user name to use.
RobMeades 0:7ccf0e7e8a83 302 */
RobMeades 0:7ccf0e7e8a83 303 const char *_uname;
RobMeades 0:7ccf0e7e8a83 304
RobMeades 0:7ccf0e7e8a83 305 /** The password to use.
RobMeades 0:7ccf0e7e8a83 306 */
RobMeades 0:7ccf0e7e8a83 307 const char *_pwd;
RobMeades 0:7ccf0e7e8a83 308
RobMeades 0:7ccf0e7e8a83 309 /** The type of authentication to use.
RobMeades 0:7ccf0e7e8a83 310 */
RobMeades 0:7ccf0e7e8a83 311 nsapi_security_t _auth;
RobMeades 0:7ccf0e7e8a83 312
RobMeades 0:7ccf0e7e8a83 313 /** Get the next set of credentials from the database.
RobMeades 0:7ccf0e7e8a83 314 */
rob.meades@u-blox.com 7:3b2ca10cc23a 315 virtual void get_next_credentials(const char ** config);
RobMeades 0:7ccf0e7e8a83 316
RobMeades 0:7ccf0e7e8a83 317 /** Activate one of the on-board modem's connection profiles.
RobMeades 0:7ccf0e7e8a83 318 *
RobMeades 0:7ccf0e7e8a83 319 * @param apn The APN to use.
RobMeades 0:7ccf0e7e8a83 320 * @param username The user name to use.
RobMeades 0:7ccf0e7e8a83 321 * @param password The password to use.
RobMeades 0:7ccf0e7e8a83 322 * @param auth The authentication method to use
RobMeades 0:7ccf0e7e8a83 323 * (NSAPI_SECURITY_NONE, NSAPI_SECURITY_PAP,
RobMeades 0:7ccf0e7e8a83 324 * NSAPI_SECURITY_CHAP or NSAPI_SECURITY_UNKNOWN).
RobMeades 0:7ccf0e7e8a83 325 * @return True if successful, otherwise false.
RobMeades 0:7ccf0e7e8a83 326 */
RobMeades 0:7ccf0e7e8a83 327 virtual bool activate_profile(const char* apn, const char* username,
RobMeades 0:7ccf0e7e8a83 328 const char* password, nsapi_security_t auth);
RobMeades 0:7ccf0e7e8a83 329
RobMeades 0:7ccf0e7e8a83 330 /** Activate a profile using the existing external connection.
RobMeades 0:7ccf0e7e8a83 331 *
RobMeades 0:7ccf0e7e8a83 332 * @return true if successful, otherwise false.
RobMeades 0:7ccf0e7e8a83 333 */
RobMeades 0:7ccf0e7e8a83 334 virtual bool activate_profile_reuse_external(void);
RobMeades 0:7ccf0e7e8a83 335
RobMeades 0:7ccf0e7e8a83 336 /** Activate a profile based on connection ID.
RobMeades 0:7ccf0e7e8a83 337 *
RobMeades 0:7ccf0e7e8a83 338 * @param cid The connection ID.
RobMeades 0:7ccf0e7e8a83 339 * @param apn The APN to use.
RobMeades 0:7ccf0e7e8a83 340 * @param username The user name to use.
RobMeades 0:7ccf0e7e8a83 341 * @param password The password to use.
RobMeades 0:7ccf0e7e8a83 342 * @param auth The authentication method to use.
RobMeades 0:7ccf0e7e8a83 343 * @return True if successful, otherwise false.
RobMeades 0:7ccf0e7e8a83 344 */
RobMeades 0:7ccf0e7e8a83 345 virtual bool activate_profile_by_cid(int cid, const char* apn, const char* username,
RobMeades 0:7ccf0e7e8a83 346 const char* password, nsapi_security_t auth);
RobMeades 0:7ccf0e7e8a83 347
RobMeades 0:7ccf0e7e8a83 348 /** Connect the on board IP stack of the modem.
RobMeades 0:7ccf0e7e8a83 349 *
RobMeades 0:7ccf0e7e8a83 350 * @return True if successful, otherwise false.
RobMeades 0:7ccf0e7e8a83 351 */
RobMeades 0:7ccf0e7e8a83 352 virtual bool connect_modem_stack();
RobMeades 0:7ccf0e7e8a83 353
RobMeades 0:7ccf0e7e8a83 354 /** Disconnect the on board IP stack of the modem.
RobMeades 0:7ccf0e7e8a83 355 *
RobMeades 0:7ccf0e7e8a83 356 * @return True if successful, otherwise false.
RobMeades 0:7ccf0e7e8a83 357 */
RobMeades 0:7ccf0e7e8a83 358 virtual bool disconnect_modem_stack();
RobMeades 0:7ccf0e7e8a83 359
RobMeades 0:7ccf0e7e8a83 360 /** Provide access to the NetworkStack object
RobMeades 0:7ccf0e7e8a83 361 *
RobMeades 0:7ccf0e7e8a83 362 * @return The underlying NetworkStack object.
RobMeades 0:7ccf0e7e8a83 363 */
RobMeades 0:7ccf0e7e8a83 364 virtual NetworkStack *get_stack();
RobMeades 0:7ccf0e7e8a83 365
RobMeades 0:7ccf0e7e8a83 366 protected:
RobMeades 0:7ccf0e7e8a83 367
RobMeades 0:7ccf0e7e8a83 368 /** Open a socket.
RobMeades 0:7ccf0e7e8a83 369 *
RobMeades 0:7ccf0e7e8a83 370 * Creates a network socket and stores it in the specified handle.
RobMeades 0:7ccf0e7e8a83 371 * The handle must be passed to following calls on the socket.
RobMeades 0:7ccf0e7e8a83 372 *
RobMeades 0:7ccf0e7e8a83 373 * @param handle Destination for the handle to a newly created socket.
RobMeades 0:7ccf0e7e8a83 374 * @param proto Protocol of socket to open, NSAPI_TCP or NSAPI_UDP.
RobMeades 0:7ccf0e7e8a83 375 * @return 0 on success, negative error code on failure.
RobMeades 0:7ccf0e7e8a83 376 */
RobMeades 0:7ccf0e7e8a83 377 virtual nsapi_error_t socket_open(nsapi_socket_t *handle,
RobMeades 0:7ccf0e7e8a83 378 nsapi_protocol_t proto);
RobMeades 0:7ccf0e7e8a83 379
RobMeades 0:7ccf0e7e8a83 380 /** Close a socket.
RobMeades 0:7ccf0e7e8a83 381 *
RobMeades 0:7ccf0e7e8a83 382 * Closes any open connection and deallocates any memory associated
RobMeades 0:7ccf0e7e8a83 383 * with the socket.
RobMeades 0:7ccf0e7e8a83 384 *
RobMeades 0:7ccf0e7e8a83 385 * @param handle Socket handle.
RobMeades 0:7ccf0e7e8a83 386 * @return 0 on success, negative error code on failure.
RobMeades 0:7ccf0e7e8a83 387 */
RobMeades 0:7ccf0e7e8a83 388 virtual nsapi_error_t socket_close(nsapi_socket_t handle);
RobMeades 0:7ccf0e7e8a83 389
RobMeades 0:7ccf0e7e8a83 390 /** Bind a specific port to a socket.
RobMeades 0:7ccf0e7e8a83 391 *
RobMeades 0:7ccf0e7e8a83 392 * Binding a socket specifies port on which to receive
RobMeades 0:7ccf0e7e8a83 393 * data. The IP address is ignored. Note that binding
RobMeades 0:7ccf0e7e8a83 394 * a socket involves closing it and reopening and so the
RobMeades 0:7ccf0e7e8a83 395 * bind operation should be carried out before any others.
RobMeades 0:7ccf0e7e8a83 396 *
RobMeades 0:7ccf0e7e8a83 397 * @param handle Socket handle.
RobMeades 0:7ccf0e7e8a83 398 * @param address Local address to bind (of which only the port is used).
RobMeades 0:7ccf0e7e8a83 399 * @return 0 on success, negative error code on failure.
RobMeades 0:7ccf0e7e8a83 400 */
RobMeades 0:7ccf0e7e8a83 401 virtual nsapi_error_t socket_bind(nsapi_socket_t handle,
RobMeades 0:7ccf0e7e8a83 402 const SocketAddress &address);
RobMeades 0:7ccf0e7e8a83 403
RobMeades 0:7ccf0e7e8a83 404 /** Connects TCP socket to a remote host.
RobMeades 0:7ccf0e7e8a83 405 *
RobMeades 0:7ccf0e7e8a83 406 * Initiates a connection to a remote server specified by the
RobMeades 0:7ccf0e7e8a83 407 * indicated address.
RobMeades 0:7ccf0e7e8a83 408 *
RobMeades 0:7ccf0e7e8a83 409 * @param handle Socket handle.
RobMeades 0:7ccf0e7e8a83 410 * @param address The SocketAddress of the remote host.
RobMeades 0:7ccf0e7e8a83 411 * @return 0 on success, negative error code on failure.
RobMeades 0:7ccf0e7e8a83 412 */
RobMeades 0:7ccf0e7e8a83 413 virtual nsapi_error_t socket_connect(nsapi_socket_t handle,
RobMeades 0:7ccf0e7e8a83 414 const SocketAddress &address);
RobMeades 0:7ccf0e7e8a83 415
RobMeades 0:7ccf0e7e8a83 416 /** Send data over a TCP socket.
RobMeades 0:7ccf0e7e8a83 417 *
RobMeades 0:7ccf0e7e8a83 418 * The socket must be connected to a remote host. Returns the number of
RobMeades 0:7ccf0e7e8a83 419 * bytes sent from the buffer. This class sets no upper buffer limit on
RobMeades 0:7ccf0e7e8a83 420 * buffer size and the maximum packet size is not connected with the
RobMeades 0:7ccf0e7e8a83 421 * platform.buffered-serial-txbuf-size/platform.buffered-serial-rxbuf-size
RobMeades 0:7ccf0e7e8a83 422 * definitions.
RobMeades 0:7ccf0e7e8a83 423 *
RobMeades 0:7ccf0e7e8a83 424 * @param handle Socket handle.
RobMeades 0:7ccf0e7e8a83 425 * @param data Buffer of data to send to the host.
RobMeades 0:7ccf0e7e8a83 426 * @param size Size of the buffer in bytes.
RobMeades 0:7ccf0e7e8a83 427 * @return Number of sent bytes on success, negative error
RobMeades 0:7ccf0e7e8a83 428 * code on failure.
RobMeades 0:7ccf0e7e8a83 429 */
RobMeades 0:7ccf0e7e8a83 430 virtual nsapi_size_or_error_t socket_send(nsapi_socket_t handle,
RobMeades 0:7ccf0e7e8a83 431 const void *data, nsapi_size_t size);
RobMeades 0:7ccf0e7e8a83 432
RobMeades 0:7ccf0e7e8a83 433 /** Send a packet over a UDP socket.
RobMeades 0:7ccf0e7e8a83 434 *
RobMeades 0:7ccf0e7e8a83 435 * Sends data to the specified address. Returns the number of bytes
RobMeades 0:7ccf0e7e8a83 436 * sent from the buffer.
RobMeades 0:7ccf0e7e8a83 437 *
RobMeades 0:7ccf0e7e8a83 438 * PACKET SIZES: the maximum packet size that can be sent in a single
RobMeades 0:7ccf0e7e8a83 439 * UDP packet is limited by the configuration value
RobMeades 0:7ccf0e7e8a83 440 * platform.buffered-serial-txbuf-size (defaults to 256).
RobMeades 0:7ccf0e7e8a83 441 * The maximum UDP packet size is:
RobMeades 0:7ccf0e7e8a83 442 *
RobMeades 0:7ccf0e7e8a83 443 * platform.buffered-serial-txbuf-size - AT_PACKET_OVERHEAD
RobMeades 0:7ccf0e7e8a83 444 *
RobMeades 0:7ccf0e7e8a83 445 * ...with a limit of 1024 bytes (at the AT interface). So, to allow sending
RobMeades 0:7ccf0e7e8a83 446 * of a 1024 byte UDP packet, edit your mbed_app.json to add a target override
RobMeades 0:7ccf0e7e8a83 447 * setting platform.buffered-serial-txbuf-size to 1101. However, for
RobMeades 0:7ccf0e7e8a83 448 * UDP packets, 508 bytes is considered a more realistic size, taking into
RobMeades 0:7ccf0e7e8a83 449 * account fragmentation sizes over the public internet, which leads to a
RobMeades 0:7ccf0e7e8a83 450 * platform.buffered-serial-txbuf-size/platform.buffered-serial-rxbuf-size
RobMeades 0:7ccf0e7e8a83 451 * setting of 585.
RobMeades 0:7ccf0e7e8a83 452 *
RobMeades 0:7ccf0e7e8a83 453 * If size is larger than this limit, the data will be split across separate
RobMeades 0:7ccf0e7e8a83 454 * UDP packets.
RobMeades 0:7ccf0e7e8a83 455 *
RobMeades 0:7ccf0e7e8a83 456 * @param handle Socket handle.
RobMeades 0:7ccf0e7e8a83 457 * @param address The SocketAddress of the remote host.
RobMeades 0:7ccf0e7e8a83 458 * @param data Buffer of data to send to the host.
RobMeades 0:7ccf0e7e8a83 459 * @param size Size of the buffer in bytes.
RobMeades 0:7ccf0e7e8a83 460 * @return Number of sent bytes on success, negative error
RobMeades 0:7ccf0e7e8a83 461 * code on failure.
RobMeades 0:7ccf0e7e8a83 462 */
RobMeades 0:7ccf0e7e8a83 463 virtual nsapi_size_or_error_t socket_sendto(nsapi_socket_t handle,
RobMeades 0:7ccf0e7e8a83 464 const SocketAddress &address,
RobMeades 0:7ccf0e7e8a83 465 const void *data,
RobMeades 0:7ccf0e7e8a83 466 nsapi_size_t size);
RobMeades 0:7ccf0e7e8a83 467
RobMeades 0:7ccf0e7e8a83 468 /** Receive data over a TCP socket.
RobMeades 0:7ccf0e7e8a83 469 *
RobMeades 0:7ccf0e7e8a83 470 * The socket must be connected to a remote host. Returns the number of
RobMeades 0:7ccf0e7e8a83 471 * bytes received into the buffer. This class sets no upper limit on the
RobMeades 0:7ccf0e7e8a83 472 * buffer size and the maximum packet size is not connected with the
RobMeades 0:7ccf0e7e8a83 473 * platform.buffered-serial-txbuf-size/platform.buffered-serial-rxbuf-size
RobMeades 0:7ccf0e7e8a83 474 * definitions.
RobMeades 0:7ccf0e7e8a83 475 *
RobMeades 0:7ccf0e7e8a83 476 * @param handle Socket handle.
RobMeades 0:7ccf0e7e8a83 477 * @param data Destination buffer for data received from the host.
RobMeades 0:7ccf0e7e8a83 478 * @param size Size of the buffer in bytes.
RobMeades 0:7ccf0e7e8a83 479 * @return Number of received bytes on success, negative error
RobMeades 0:7ccf0e7e8a83 480 * code on failure.
RobMeades 0:7ccf0e7e8a83 481 */
RobMeades 0:7ccf0e7e8a83 482 virtual nsapi_size_or_error_t socket_recv(nsapi_socket_t handle,
RobMeades 0:7ccf0e7e8a83 483 void *data, nsapi_size_t size);
RobMeades 0:7ccf0e7e8a83 484
RobMeades 0:7ccf0e7e8a83 485 /** Receive a packet over a UDP socket.
RobMeades 0:7ccf0e7e8a83 486 *
RobMeades 0:7ccf0e7e8a83 487 * Receives data and stores the source address in address if address
RobMeades 0:7ccf0e7e8a83 488 * is not NULL. Returns the number of bytes received into the buffer.
RobMeades 0:7ccf0e7e8a83 489 *
RobMeades 0:7ccf0e7e8a83 490 * PACKET SIZES: the maximum packet size that can be retrieved in a
RobMeades 0:7ccf0e7e8a83 491 * single call to this method is limited by the configuration value
RobMeades 0:7ccf0e7e8a83 492 * platform.buffered-serial-rxbuf-size (default 256). The maximum
RobMeades 0:7ccf0e7e8a83 493 * UDP packet size is:
RobMeades 0:7ccf0e7e8a83 494 *
RobMeades 0:7ccf0e7e8a83 495 * platform.buffered-serial-rxbuf-size - AT_PACKET_OVERHEAD
RobMeades 0:7ccf0e7e8a83 496 *
RobMeades 0:7ccf0e7e8a83 497 * ...with a limit of 1024 (at the AT interface). So to allow reception of a
RobMeades 0:7ccf0e7e8a83 498 * 1024 byte UDP packet in a single call, edit your mbed_app.json to add a
RobMeades 0:7ccf0e7e8a83 499 * target override setting platform.buffered-serial-rxbuf-size to 1101.
RobMeades 0:7ccf0e7e8a83 500 *
RobMeades 0:7ccf0e7e8a83 501 * If the received packet is larger than this limit, any remainder will
RobMeades 0:7ccf0e7e8a83 502 * be returned in subsequent calls to this method. Once a single UDP
RobMeades 0:7ccf0e7e8a83 503 * packet has been received, this method will return.
RobMeades 0:7ccf0e7e8a83 504 *
RobMeades 0:7ccf0e7e8a83 505 * @param handle Socket handle.
RobMeades 0:7ccf0e7e8a83 506 * @param address Destination for the source address or NULL.
RobMeades 0:7ccf0e7e8a83 507 * @param data Destination buffer for data received from the host.
RobMeades 0:7ccf0e7e8a83 508 * @param size Size of the buffer in bytes.
RobMeades 0:7ccf0e7e8a83 509 * @return Number of received bytes on success, negative error
RobMeades 0:7ccf0e7e8a83 510 * code on failure.
RobMeades 0:7ccf0e7e8a83 511 */
RobMeades 0:7ccf0e7e8a83 512 virtual nsapi_size_or_error_t socket_recvfrom(nsapi_socket_t handle,
RobMeades 0:7ccf0e7e8a83 513 SocketAddress *address,
RobMeades 0:7ccf0e7e8a83 514 void *data, nsapi_size_t size);
RobMeades 0:7ccf0e7e8a83 515
RobMeades 0:7ccf0e7e8a83 516 /** Register a callback on state change of the socket.
RobMeades 0:7ccf0e7e8a83 517 *
RobMeades 0:7ccf0e7e8a83 518 * The specified callback will be called on state changes such as when
RobMeades 0:7ccf0e7e8a83 519 * the socket can recv/send/accept successfully and on when an error
RobMeades 0:7ccf0e7e8a83 520 * occurs. The callback may also be called spuriously without reason.
RobMeades 0:7ccf0e7e8a83 521 *
RobMeades 0:7ccf0e7e8a83 522 * The callback may be called in an interrupt context and should not
RobMeades 0:7ccf0e7e8a83 523 * perform expensive operations such as recv/send calls.
RobMeades 0:7ccf0e7e8a83 524 *
RobMeades 0:7ccf0e7e8a83 525 * @param handle Socket handle.
RobMeades 0:7ccf0e7e8a83 526 * @param callback Function to call on state change.
RobMeades 0:7ccf0e7e8a83 527 * @param data Argument to pass to callback.
RobMeades 0:7ccf0e7e8a83 528 */
RobMeades 0:7ccf0e7e8a83 529 virtual void socket_attach(nsapi_socket_t handle, void (*callback)(void *),
RobMeades 0:7ccf0e7e8a83 530 void *data);
RobMeades 0:7ccf0e7e8a83 531
RobMeades 0:7ccf0e7e8a83 532 /** Listen for connections on a TCP socket.
RobMeades 0:7ccf0e7e8a83 533 *
RobMeades 0:7ccf0e7e8a83 534 * Marks the socket as a passive socket that can be used to accept
RobMeades 0:7ccf0e7e8a83 535 * incoming connections.
RobMeades 0:7ccf0e7e8a83 536 *
RobMeades 0:7ccf0e7e8a83 537 * @param handle Socket handle.
RobMeades 0:7ccf0e7e8a83 538 * @param backlog Number of pending connections that can be queued
RobMeades 0:7ccf0e7e8a83 539 * simultaneously, defaults to 1.
RobMeades 0:7ccf0e7e8a83 540 * @return 0 on success, negative error code on failure.
RobMeades 0:7ccf0e7e8a83 541 */
RobMeades 0:7ccf0e7e8a83 542 virtual nsapi_error_t socket_listen(nsapi_socket_t handle, int backlog);
RobMeades 0:7ccf0e7e8a83 543
RobMeades 0:7ccf0e7e8a83 544 /** Accepts a connection on a TCP socket.
RobMeades 0:7ccf0e7e8a83 545 *
RobMeades 0:7ccf0e7e8a83 546 * The server socket must be bound and set to listen for connections.
RobMeades 0:7ccf0e7e8a83 547 * On a new connection, creates a network socket and stores it in the
RobMeades 0:7ccf0e7e8a83 548 * specified handle. The handle must be passed to following calls on
RobMeades 0:7ccf0e7e8a83 549 * the socket.
RobMeades 0:7ccf0e7e8a83 550 *
RobMeades 0:7ccf0e7e8a83 551 * A stack may have a finite number of sockets, in this case
RobMeades 0:7ccf0e7e8a83 552 * NSAPI_ERROR_NO_SOCKET is returned if no socket is available.
RobMeades 0:7ccf0e7e8a83 553 *
RobMeades 0:7ccf0e7e8a83 554 * This call is non-blocking. If accept would block,
RobMeades 0:7ccf0e7e8a83 555 * NSAPI_ERROR_WOULD_BLOCK is returned immediately.
RobMeades 0:7ccf0e7e8a83 556 *
RobMeades 0:7ccf0e7e8a83 557 * @param server Socket handle to server to accept from.
RobMeades 0:7ccf0e7e8a83 558 * @param handle Destination for a handle to the newly created socket.
RobMeades 0:7ccf0e7e8a83 559 * @param address Destination for the remote address or NULL.
RobMeades 0:7ccf0e7e8a83 560 * @return 0 on success, negative error code on failure.
RobMeades 0:7ccf0e7e8a83 561 */
RobMeades 0:7ccf0e7e8a83 562 virtual nsapi_error_t socket_accept(nsapi_socket_t server,
RobMeades 0:7ccf0e7e8a83 563 nsapi_socket_t *handle,
RobMeades 0:7ccf0e7e8a83 564 SocketAddress *address = 0);
RobMeades 0:7ccf0e7e8a83 565
RobMeades 0:7ccf0e7e8a83 566 /** Set stack-specific socket options.
RobMeades 0:7ccf0e7e8a83 567 *
RobMeades 0:7ccf0e7e8a83 568 * The setsockopt allow an application to pass stack-specific hints
RobMeades 0:7ccf0e7e8a83 569 * to the underlying stack. For unsupported options,
RobMeades 0:7ccf0e7e8a83 570 * NSAPI_ERROR_UNSUPPORTED is returned and the socket is unmodified.
RobMeades 0:7ccf0e7e8a83 571 *
RobMeades 0:7ccf0e7e8a83 572 * @param handle Socket handle.
RobMeades 0:7ccf0e7e8a83 573 * @param level Stack-specific protocol level.
RobMeades 0:7ccf0e7e8a83 574 * @param optname Stack-specific option identifier.
RobMeades 0:7ccf0e7e8a83 575 * @param optval Option value.
RobMeades 0:7ccf0e7e8a83 576 * @param optlen Length of the option value.
RobMeades 0:7ccf0e7e8a83 577 * @return 0 on success, negative error code on failure.
RobMeades 0:7ccf0e7e8a83 578 */
RobMeades 0:7ccf0e7e8a83 579 virtual nsapi_error_t setsockopt(nsapi_socket_t handle, int level,
RobMeades 0:7ccf0e7e8a83 580 int optname, const void *optval,
RobMeades 0:7ccf0e7e8a83 581 unsigned optlen);
RobMeades 0:7ccf0e7e8a83 582
RobMeades 0:7ccf0e7e8a83 583 /** Get stack-specific socket options.
RobMeades 0:7ccf0e7e8a83 584 *
RobMeades 0:7ccf0e7e8a83 585 * The getstackopt allow an application to retrieve stack-specific hints
RobMeades 0:7ccf0e7e8a83 586 * from the underlying stack. For unsupported options,
RobMeades 0:7ccf0e7e8a83 587 * NSAPI_ERROR_UNSUPPORTED is returned and optval is unmodified.
RobMeades 0:7ccf0e7e8a83 588 *
RobMeades 0:7ccf0e7e8a83 589 * @param handle Socket handle.
RobMeades 0:7ccf0e7e8a83 590 * @param level Stack-specific protocol level.
RobMeades 0:7ccf0e7e8a83 591 * @param optname Stack-specific option identifier.
RobMeades 0:7ccf0e7e8a83 592 * @param optval Destination for option value.
RobMeades 0:7ccf0e7e8a83 593 * @param optlen Length of the option value.
RobMeades 0:7ccf0e7e8a83 594 * @return 0 on success, negative error code on failure.
RobMeades 0:7ccf0e7e8a83 595 */
RobMeades 0:7ccf0e7e8a83 596 virtual nsapi_error_t getsockopt(nsapi_socket_t handle, int level,
RobMeades 0:7ccf0e7e8a83 597 int optname, void *optval,
RobMeades 0:7ccf0e7e8a83 598 unsigned *optlen);
RobMeades 0:7ccf0e7e8a83 599
RobMeades 0:7ccf0e7e8a83 600 private:
RobMeades 0:7ccf0e7e8a83 601
RobMeades 0:7ccf0e7e8a83 602 // u_ added to namespace us somewhat as this darned macro
RobMeades 0:7ccf0e7e8a83 603 // is defined by everyone and their dog
RobMeades 0:7ccf0e7e8a83 604 #define u_stringify(a) str(a)
RobMeades 0:7ccf0e7e8a83 605 #define str(a) #a
RobMeades 0:7ccf0e7e8a83 606
RobMeades 0:7ccf0e7e8a83 607 bool _sim_pin_check_change_pending;
RobMeades 0:7ccf0e7e8a83 608 bool _sim_pin_check_change_pending_enabled_value;
RobMeades 0:7ccf0e7e8a83 609 bool _sim_pin_change_pending;
RobMeades 0:7ccf0e7e8a83 610 const char *_sim_pin_change_pending_new_pin_value;
RobMeades 0:7ccf0e7e8a83 611 Thread event_thread;
RobMeades 14:e7dcf3388403 612 volatile bool _run_event_thread;
RobMeades 0:7ccf0e7e8a83 613 void handle_event();
RobMeades 0:7ccf0e7e8a83 614 SockCtrl * find_socket(int modem_handle = SOCKET_UNUSED);
RobMeades 0:7ccf0e7e8a83 615 void clear_socket(SockCtrl * socket);
RobMeades 0:7ccf0e7e8a83 616 bool check_socket(SockCtrl * socket);
RobMeades 0:7ccf0e7e8a83 617 int nsapi_security_to_modem_security(nsapi_security_t nsapi_security);
RobMeades 0:7ccf0e7e8a83 618 Callback<void(nsapi_error_t)> _connection_status_cb;
RobMeades 0:7ccf0e7e8a83 619 void UUSORD_URC();
RobMeades 0:7ccf0e7e8a83 620 void UUSORF_URC();
RobMeades 0:7ccf0e7e8a83 621 void UUSOCL_URC();
RobMeades 0:7ccf0e7e8a83 622 void UUPSDD_URC();
RobMeades 0:7ccf0e7e8a83 623 };
RobMeades 0:7ccf0e7e8a83 624
rob.meades@u-blox.com 1:bc228becc45d 625 #endif // _UBLOX_AT_CELLULAR_INTERFACE_
RobMeades 0:7ccf0e7e8a83 626