gnss_operations.h

00001 
00002 #include "gnss.h"
00003 
00004 #define UBX_FRAME_SIZE 8
00005 #ifdef __cplusplus
00006 extern "C" {
00007 #endif
00008 
00009 /** Enums
00010 */
00011     enum Command{
00012             POWER_ON,
00013             POWER_OFF,
00014             MON_VER,
00015             ENABLE_UBX,
00016             RESTART, // mbed conflict with RESET
00017             CUSTOMER,
00018             AVAILABLE_CONFIG
00019         };
00020     /** The reset modes
00021     */
00022     enum Start{
00023             HOT,
00024             COLD,
00025             WARM,
00026             MAX_MODE
00027         };
00028 
00029     /** The operation modes
00030     */
00031     enum Powermodes{
00032 
00033         CONSERVATIVE_CONTINOUS,
00034         AGGRESSIVE_CONTINUOS,
00035         SEMI_CONTINOUS,
00036         FULL_POWER,
00037         FULL_POWER_BLOCK_LEVEL,
00038         FULL_POWER_BUILDING_LEVEL,
00039         AVAILABLE_OPERATION
00040     };
00041 
00042 
00043 class GnssOperations : public GnssSerial{
00044 
00045     //GnssSerial constructor can be called here to configure different baud rate
00046     //Constructor not required at the moment
00047     //GnssOperations();
00048 
00049 public:
00050 
00051     /** Enable GNSS receiver UBX-NAV-PVT messages
00052      *  Navigation Position Velocity Time Solution
00053      *  @param void
00054      *  @return int     1: Successful
00055      *                  0: Failure
00056      */
00057     int enable_ubx_nav_pvt();
00058 
00059     /** Enable GNSS receiver UBX-STATUS messages
00060      *  Receiver Navigation Status
00061      *  @param void
00062      *  @return int     1: Successful
00063      *                  0: Failure
00064      */
00065     int enable_ubx_nav_status();
00066 
00067     /** Enable GNSS receiver UBX-NAV-SAT messages
00068      *  Satellite Information
00069      *  @param void
00070      *  @return int     1: Successful
00071      *                  0: Failure
00072      */
00073     int enable_ubx_nav_sat();
00074 
00075     /** Enable GNSS receiver UBX-NAV-SOL messages
00076      * Navigation Solution Information
00077      *  @param void
00078      *  @return int     1: Successful
00079      *                  0: Failure
00080      */
00081     int enable_ubx_nav_sol();
00082 
00083     /** Disable GNSS receiver UBX-NAV-PVT messages
00084      *  @param void
00085      *  @return int     1: Successful
00086      *                  0: Failure
00087      */
00088     int disable_ubx_nav_pvt();
00089 
00090     /** Enable GNSS receiver UBX-NAV5 messages
00091      *  Navigation Engine Settings
00092      *  @param  uint    acc     Defines positioning accuracy
00093      *  @return int             1: Successful
00094      *                          0: Failure
00095      */
00096     int enable_ubx_nav5(unsigned int acc);
00097 
00098     /** Enable GNSS receiver UBX-NAVX5 messages
00099      *  Navigation Engine Settings
00100      *  @return int             1: Successful
00101      *                          0: Failure
00102      */
00103     int enable_ubx_navx5();
00104 
00105     /** Enable GNSS receiver UBX-CFG-ODO messages
00106      *  Odometer, Low-speed COG Engine Settings
00107      *  @param void
00108      *  @return int     1: Successful
00109      *                  0: Failure
00110      */
00111     int enable_ubx_odo();
00112 
00113     /** Disable GNSS receiver UBX-CFG-ODO messages
00114      *  @param void
00115      *  @return int     1: Successful
00116      *                  0: Failure
00117      */
00118     int disable_ubx_odo();
00119 
00120     /** Enable GNSS receiver UBX-NAV-ODO messages
00121      *  Odometer, Low-speed COG Engine Settings
00122      *  @param void
00123      *  @return int     1: Successful
00124      *                  0: Failure
00125      */
00126     int enable_ubx_nav_odo();
00127 
00128     /** Disable GNSS receiver UBX-NAV-ODO messages
00129      *  Odometer, Low-speed COG Engine Settings
00130      *  @param void
00131      *  @return int     1: Successful
00132      *                  0: Failure
00133      */
00134     int disable_ubx_nav_odo();
00135 
00136     /** Enable GNSS receiver UBX-LOG-BATCH messages
00137      *  Batched data
00138      *  @param void
00139      *  @return int     1: Successful
00140      *                  0: Failure
00141      */
00142     int enable_ubx_batch_feature();
00143 
00144     /** Disable GNSS receiver UBX-LOG-BATCH messages
00145      *  Batched data
00146      *  @param void
00147      *  @return int     1: Successful
00148      *                  0: Failure
00149      */
00150     int disable_ubx_batch_feature();
00151 
00152     /** Configure GNSS receiver batching feature
00153      *  Get/Set data batching configuration
00154      *  @param  tUBX_CFG_BATCH
00155      *  @return int     1: Successful
00156      *                  0: Failure
00157      */
00158     int cfg_batch_feature(tUBX_CFG_BATCH *obj);
00159 
00160     /** Configure GNSS receiver power mode
00161      *  Power mode setup
00162      *  @param  Powermodes     SEMI_CONTINOUS
00163      *                          AGGRESSIVE_CONTINUOS
00164      *                          CONSERVATIVE_CONTINOUS
00165      *                          FULL_POWER
00166      *                          FULL_POWER_BLOCK_LEVEL
00167      *          minimumAcqTime  boolean
00168      *
00169      *  @return int             1: Successful
00170      *                         0: Failure
00171      */
00172     int cfg_power_mode(Powermodes power_mode, bool minimumAcqTime);
00173 
00174     /** Method to poll the GNSS configuration
00175      *  @param  void
00176      *  @return bool    true:   Successful
00177      *                  false:  Failure
00178      */
00179     bool verify_gnss_mode();
00180 
00181     /** Configure GNSS startup mode
00182      *  Power mode setup
00183      *  @param  start_mode      0: Hot Start
00184      *                          1: Warm Start
00185      *                          2: Cold Start
00186      *
00187      *  @return int             1: Successful
00188      *                          0: Failure
00189      */
00190     int start_mode(int start_mode);
00191 
00192     /** Send char to GNSS receiver
00193      *  @param  char
00194      *  @return void
00195      */
00196     void send_to_gnss(char);
00197 
00198     /** Power On GNSS receiver
00199      *
00200      *  @return void
00201      */
00202     void power_on_gnss();
00203 
00204 };
00205 #ifdef __cplusplus
00206 }
00207 #endif